Download Literature Xantrex 81-2010-12 Inverters Freedom 458 Inverter/Charger - 2000W120 Vac / 60 HzWith filtered modified sine wave output, the Freedom 458 inverter/charger has the ability to run electrical equipment, appliances, and even sensitive electronics. Perfect for any RV, the temperature-controlled multistage charging ensures that your batteries are recharged quickly, and safety features such as automatic shutdown protect your expensive deep-cycle batteries from excessive depletion.AC Power Inverter with High Surge Capability, 3-Stage ChargerWith filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV. Temperature-controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion.For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation.Product Features: MSW AC power inverter with a high surge capability Automatic 3-stage battery charger Temperature compensation with equalization stage provides optimal charging of deep cycle batteries Built-in transfer switch automatically transfers between inverter power and incoming AC power Power sharing prevents the source AC input circuit breaker from tripping Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panels Includes battery temperature sensor 30-month warranty Dimensions: (H x W x L) 7.9 x 11.5 x 13.2” (201 x 292 x 335 mm) Weight: 45 lb (20 kg) Hardwired AC Output (Single In/Single Out) Protection Features: Over-voltage and under-voltage protection Over-temperature protection Overload protection Short circuit protection WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 81201012UPC Code: 647912105630 Xantrex 81-2010-12 Literature Download   Quick Reference Guide  Owners Manual

Magnum Energy ME-BTS-15 Inverters ME/MS/RD Battery Temp Sensor Battery temperature sensor for proper charging performance 15-foot cable Replaces Magnum ME-BTS-15-F Normalized SKU: MEBTS15

Magnum Energy ME-AGS-S Inverters Magnum Energy Auto Gen Sart/Stand-alone The ME-AGS-N and ME-AGS-S Auto Generator Start controllers can automatically start your generator based on battery voltage or inside temperature Available as a fully networked system (ME-AGS-N) or a standalone system (ME-AGS-S) Starts most diesel or gas generators Adjustable settings include: run time start volts DC start temp quiet time and 24 hour clock Normalized SKU: MEAGSS

Download Literature Watch VideoXantrex 818-3015 InvertersFreedom XC PRO Marine 3000W Inverter/Charger - 12VA true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). Seamless integration with Micro-C NMEA 2000 Connector.The Freedom XC PRO Marine inverter/charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexible AC power solution in the market today. It supports seamless integration with third-party monitoring and control systems. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, lightweight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.Features: Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For the operation of sensitive and motor loads Ignition Control: Feature to turn the inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Built-in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power Built-In Charger Features: Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting Easily configurable settings to charge any lithium-ion battery This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: 8183015Xantrex 818-3015 Literature Download Quick Reference GuideXantrex 818-3015 Video

  Download Literature Xantrex 81-2022-12 Inverters Freedom 458 Inverter/ChargerAC Power Inverter with High Surge Capability, 3-Stage ChargerWith filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV. Temperature controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion. For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation.Product Features MSW AC power inverter with high surge capability Automatic 3-stage battery charger Temperature compensation with equalization stage provides optimal charging of deep cycle batteries Built-in transfer switch automatically transfers between inverter power and incoming AC power Power sharing prevents source AC input circuit breaker from tripping Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panels Includes battery temperature sensor 30 month warranty Protection Features Over voltage and under voltage protection Over-temperature protection Overload protection Short circuit protection Electrical Specifications - Inverter Output power (continuous): 2000W Surge power (AC amps): 50A Output frequency regulation: 60Hz Inverter voltage regulation: 120V +/-5% true RMS Output wave form: Modified sine wave Efficiency (full load): 85% Peak efficiency: 92% No load current draw (idle mode): 0.12A AC output connections: Dual - 20/15 Circuit Breakers AC input connections: Single AC transfer switch: 30A Electrical Specifications - Charger Charge rate: 100A DC AC input voltage range: 90 130 VAC Battery voltage (nominal): 12 VDC Battery voltage range: 10.0 15.5 VDC Low battery cut-out: 10.0 VDC AC input (max. charge mode): 21A AC Bulk charge voltage: 14.3 VDC*** Float charge voltage: 13.4 VDC*** Equalize charge voltage: 16.3 VDC Charge control: 3-stage Battery type settings: Wet / Gel 1 / Gel 2 / AGM Equalization: Yes Temperature sensitive charging: Yes ***Default value varies with battery type and temperature WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 81202212UPC Code: 647912106149 Xantrex 81-2022-12 Literature Download   Owners Manual  Product Brochure

Magnum Energy A88-0100 Inverters Hardware kit includes: AC door cover (White) DC covers (Red and Black) Compatible with: MS Series MSH-M Series MSH-RE Series MSH-RV Series MS-E Series MS-AE Series MS-PAE Series MS-PE Series MS-AEJ Series Replaces Magnum Energy A88-0011 Normalized SKU: A880100

Download Literature Watch VideoVictron Energy PMP122305122 InvertersMultiPlus-II 12/3000 - 120-50 - 120V - UL ApprovedThe MultiPlus-II, an inverter/charger, combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A). It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals.PowerAssistThe MultiPlus-II will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery.ESS: Energy Storage SystemsThe MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. Uninterrupted AC power (UPS function)In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.Remote Monitoring and ControlWhen coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backup generator and more.*Note: for a short period of time this product was called MultiGrid-II.Please contact your dealer for any returns, repairs or support issues related to this product. Normalized SKU: PMP122305122UPC Code: 8719076059196Victron Energy PMP122305122 Literature Download Quick Reference Guide Owners ManualVictron Energy PMP122305122 Video

Xantrex 31-6257-00 InvertersRemote Cable - 25'The 25' Communications Cable can be used with select Xantrex inverters and inverter/chargers to extend the mounting location of the remote panel. Simply connect the 6-conductor communications cable to the RJ12 ports on the inverter and remote panel to extend distances up to 25'. Normalized SKU: 31625700

Watch VideoXantrex 808-0817-02 InvertersFreedom X & XC Remote Panel with Bluetooth & 25' Network CableConnect with Bluetooth: View key system information via FREEDOM X app on your smartphone or tablet Configure and monitor important parameters and settings Fault and error codes Compatible with all FREEDOM X, XC, XC PRO models in 120Vac/60Hz or 230Vac/50Hz models Download the FXC Control App on the iOS App Store or Android Google Play Store: Easily monitor system status Monitor alerts Change settings conveniently Compatible With:All FREEDOM X inverters and FREEDOM XC inverter/chargers: 817-1000, 817-2000, 817-2000-21, 817-3000, 817-1050, 817-2080, 818-2010, 818-3010, 806-1212 Normalized SKU: 808081702UPC Code: 715535906597Xantrex 808-0817-02 Video

Astron SS-10 Inverters"Small switching power supply, 7 amps continuous duty, 10 amps intermittent duty "Normalized SKU: SS10

  Download Literature  Watch VideoXantrex 815-3012 InvertersXantrex Freedom SW3012 Inverter/Charger815-301212V, 3000W - 120 Vac / 60 HzPowerful. Configurable. Versatile... The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models. Product DescriptionThe second generation 3000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart.A key feature enhancement is 'Generator Support Mode' which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.NEW - PARALLEL AND SERIES STACKINGParallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output2 2 AC source must be split phase, requires Stacking Cable (part# 808-9005)ApplicationDesigned for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.Product Features Pure sine wave output to operate sensitive electronics Advanced configuration options for customized applications Parallel and series stacking capability Built-in transfer switch automatically transfers between inverter power and incoming AC power Power factor corrected, multi-stage charger for fast, efficient charging Temperature compensated charging for a vareity of climate conditions Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power3 Wide operating temperature range: -4°F to 140°F (-20°C to 60°C) Conformal coated circuit boards for humid environments Dual input / Dual output AC interface for 3000 W model Ability to charge batteries drained to extremely low voltage Compatible with the Xantrex Automatic Generator Start4 (Part# 809-0915) 3When used with the remote panel4Sold separatelyProtection Features Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Integrated, resettable AC breakers WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:Connection Type = NONE GFI = NONE Outlet Qty = NONE Power - Output (Watts) = 3000 Power - Surge Rating = NONE Voltage - Input Range (Volts) = 12 Voltage - Inverter Input = NONE Waterproof = NONE Waveform = NONENormalized SKU: 8153012UPC Code: 715535897192Xantrex 815-3012 Literature Download  Quick Reference Guide  Owners ManualXantrex 815-3012 Video

  Download LiteratureXantrex 84-2056-01 InvertersBattery Status and Freedom Inverter/Charger Remote ControlProvides Valuable Inverter/Charger System Monitoring and ControlThe Freedom Remote Control Panel (part#84-2056-01) allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate and install, and all controls can be accessed directly from the front panel.Note: Not for Freedom HF or Freedom SW Series.Product Features Independent invert and charge on/off controls Push button control of power sharing, equalizing, battery set-up Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage and DC amperage LED warning indictors for low battery and overload warning Splash resistant design Incoming AC breaker selection allows programmable power sharing Easy to install 25' Cable One year warranty Note: The 24-volt models of Freedom Combi inverter/chargers require a different Freedom Remote the Freedom Remote - 24V SKU 82-0101-04WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:Power - Surge Rating = NONE Voltage - Inverter Input = NONE GFI = NONE Outlet Qty = NONE Power - Output (Watts) = NONE Voltage - Input Range (Volts) = NONE Waterproof = NONE Waveform = NONE Connection Type = NONEXANTREX FREEDOM 12-25 REMOTE PANEL 12V 25FT CABLENormalized SKU: 84205601UPC Code: 647912105623Xantrex 84-2056-01 Literature Download  Quick Reference Guide  Owners Manual  Product Brochure

Marpac 7-1279 InvertersMarpac Power Inverter 12v 180w #7-1279Normalized SKU: 71279UPC Code: 787766712797

Victron Energy PMP122405200 Inverters Victron Energy MultiPlus-II 12/4000/160-50 2x120V inverter/charger with 3.4 kW continuous output, 6 kW peak power, a 160 A adaptive battery charger, and a 50 A transfer switch. The Victron MultiPlus-II 12/4000/160-50 combines a 2x120V inverter, high-output battery charger, and automatic transfer switch for marine, mobile, backup, and off-grid power systems. It delivers 3.4 kW of continuous inverter power at 25°C, supports demanding loads with 6 kW peak output, and provides up to 160 A of battery charging from an available AC source. PowerControl helps prevent shore power or a generator from being overloaded, while PowerAssist supplements limited incoming AC power with energy from the battery when load demand increases. KEY FEATURES Multifunction inverter, battery charger, and transfer switch 12V DC battery system compatibility 2x120V AC output at 60 Hz 3.4 kW continuous output at 25°C 4.0 kW time-limited output for up to 1 hour from a cold start 4.5 kW time-limited output for up to 30 minutes from a cold start 6 kW peak output for 2 seconds Maximum 160 A battery charging current 50 A automatic transfer switch PowerControl limits charging demand to help prevent AC source overload PowerAssist supplements shore, generator, or grid power with battery power Main AC output transfers to inverter power in less than 20 milliseconds Auxiliary AC output disconnects loads when external AC power is unavailable Four-stage adaptive charging with BatterySafe and storage modes VE.Bus support for system integration, monitoring, and multi-unit operation Remote on/off capability Programmable relay and two general-purpose communication ports Optional external 100 A AC current sensor support Configurable with VictronConnect or VEConfigure using an MK3-USB interface Remote monitoring support through compatible Victron GX equipment and the VRM Portal TECHNICAL SPECIFICATIONS Manufacturer part number: PMP122405200 Model: MultiPlus-II 12/4k/160-50 120V DC input voltage range: 9.5-17V Inverter output voltage: 120 VAC ±2% Output frequency: 60 Hz ±0.1% Continuous output at 25°C: 3.4 kW Continuous output at 40°C: 3.1 kW Continuous output at 65°C: 2.4 kW Peak output: 6 kW for 2 seconds Maximum efficiency: 93% Zero-load consumption: 18 W Zero-load consumption in AES mode: 11 W Zero-load consumption in Search mode: 4 W AC input voltage range: 90-140 VAC AC input frequency range: 55-65 Hz Maximum AC input current: 50 A Transfer switch rating: 50 A Maximum battery charge current: 160 A at 25°C Absorption voltage: 14.4V Float voltage: 13.8V Storage voltage: 13.2V Auxiliary AC output rating: 32 A Starter-battery maintenance charge output: 4 A Operating temperature range: -40°C to 65°C (-40°F to 150°F), fan-assisted cooling Maximum non-condensing humidity: 95% Enclosure material: Steel Color: Blue, RAL 5012 Protection category: IP21 Battery connections: 2 x 2 M8 bolts Recommended 120V AC conductor size: 6 AWG Weight: 49 lb (22 kg) Dimensions: 24.8 x 10.9 x 6.5 in. (631 x 277 x 164 mm) Listing: UL 458 APPLICATIONS Recreational vehicle electrical systems Marine house-power systems Work vehicles and specialty mobile equipment Generator-supported battery systems Shore-power installations Off-grid homes and cabins Backup power systems Solar and alternative-energy installations Energy storage systems Systems requiring uninterrupted power for computers or electronics IDEAL FOR Buyers needing a combined inverter, charger, and transfer switch 12V battery banks requiring high charging current Systems with limited shore-power or generator capacity Applications with brief high-starting-power loads Installations that need selected loads disabled during battery operation Expandable systems requiring parallel, split-phase, or three-phase capability Owners who want optional remote monitoring and system configuration PROTECTION FEATURES Output short-circuit protection Inverter overload protection High battery-voltage protection Low battery-voltage protection High-temperature protection Protection against 120 VAC being present on the inverter output Excessive input-voltage-ripple protection Bulk-charge time protection Automatic alarm and shutdown indications for overload, low battery, high temperature, and excessive DC ripple SYSTEM COMPATIBILITY Designed for nominal 12V battery banks Supports lead-acid charging with adaptive bulk, absorption, float, and storage stages Compatible with Victron Lithium Battery Smart systems when used with the required VE.Bus BMS V2 or Lynx Smart BMS Other lithium batteries require confirmed battery and BMS compatibility plus appropriate charger configuration Compatible with solar charge controllers and grid-tie inverters in supported system designs Up to six identical units may be connected in parallel Two identical units may be configured for 120/240V split-phase operation Three identical units may be configured for three-phase operation Compatible monitoring and control options include Cerbo GX, Ekrano GX, Digital Multi Control, VE.Bus Smart Dongle, MK3-USB, VictronConnect, VEConfigure, and VRM Optional 100 A external current sensor can be used for grid-parallel PowerControl and PowerAssist applications CHECK BEFORE ORDERING Confirm the system uses a nominal 12V battery bank; this model is not for 24V or 48V battery systems. Confirm the required AC output is 120V at 60 Hz. Verify that 3.4 kW continuous output is sufficient for the combined running loads. Check motor, compressor, pump, and air-conditioning startup requirements against the 6 kW peak rating. Use an adequately sized battery bank; the manual recommends 400-1200 Ah for this model. The recommended DC fuse is 600 A. Battery-cable recommendations are two 2/0 AWG conductors per positive and negative connection for runs up to 5 m, or two 4/0 AWG conductors for runs from 5-10 m. AC input and main-output circuits are rated for 50 A and require properly sized overcurrent protection and 90°C copper conductors. The auxiliary output is limited to 32 A and turns off during inverter-only operation. Allow adequate space for cooling and maintain at least 10 cm of clearance around units used in parallel installations. Install in a dry, well-ventilated location near the battery bank. Parallel and multi-phase systems require identical units, equal-length DC cables, VE.Bus cabling, and system configuration. An MK3-USB interface and RJ45 UTP cable are required for direct computer configuration. Confirm battery chemistry, charging voltages, BMS requirements, and temperature-sensor needs before commissioning. Normalized SKU: PMP122405200

Victron Energy PMP122405100 Inverters The Victron Energy PMP122405100 MultiPlus-II 12/4k/160-50 is a 120V inverter/charger for 12V electrical systems. Its configuration combines a 4 kVA inverter rating, 160A charger rating, and 50A AC transfer rating. The Victron MultiPlus-II 12/4000/160-50 combines a 120V inverter, high-output battery charger, and automatic transfer switch for marine, mobile, backup, and off-grid power systems. It delivers 3.4 kW of continuous inverter power at 25°C, supports demanding loads with 6 kW peak output, and provides up to 160 A of battery charging. PowerControl helps prevent shore power or a generator from being overloaded, while PowerAssist supplements limited incoming AC power with energy from the battery. KEY FEATURES Multifunction inverter, battery charger, and transfer switch Designed for nominal 12V battery systems 120V AC output Fixed 60 Hz model 3.4 kW continuous output at 25°C 4.0 kW time-limited output for up to 1 hour from a cold start 4.5 kW time-limited output for up to 30 minutes from a cold start 6 kW peak output for 2 seconds Maximum 160 A battery charging current 50 A automatic transfer switch PowerControl limits charging demand to help prevent AC source overload PowerAssist supplements shore, generator, or grid power with battery power Main AC output transfers to inverter power in less than 20 milliseconds Auxiliary AC output disconnects loads when external AC power is unavailable Four-stage adaptive charging with BatterySafe and storage modes VE.Bus support for monitoring, system integration, and multi-unit operation Remote on/off capability Programmable relay Two general-purpose communication ports Optional external 100 A AC current sensor support Configurable through VictronConnect or VEConfigure with an MK3-USB interface Compatible with Victron GX equipment and the VRM Portal for remote monitoring TECHNICAL SPECIFICATIONS Manufacturer part number: PMP122405100 Model: MultiPlus-II 12/4k/160-50 120V Frequency version: 60 Hz only DC input voltage range: 9.5-17V Inverter output voltage: 120 VAC ±2% Output frequency: 60 Hz ±0.1% Continuous output at 25°C: 3.4 kW Continuous output at 40°C: 3.1 kW Continuous output at 65°C: 2.4 kW Time-limited output: 4.0 kW for 1 hour from a cold start Time-limited output: 4.5 kW for 30 minutes from a cold start Peak output: 6 kW for 2 seconds Maximum efficiency: 93% Zero-load consumption: 18 W Zero-load consumption in AES mode: 11 W Zero-load consumption in Search mode: 4 W AC input voltage range: 90-140 VAC AC input frequency range: 55-65 Hz Maximum AC input current: 50 A Transfer switch rating: 50 A Maximum battery charge current: 160 A at 25°C Absorption voltage: 14.4V Float voltage: 13.8V Storage voltage: 13.2V Auxiliary AC output rating: 32 A Starter-battery maintenance charge output: 4 A External AC current sensor capacity: 100 A optional Operating temperature range: -40°C to 65°C (-40°F to 150°F), fan-assisted cooling Maximum non-condensing humidity: 95% Enclosure material: Steel Color: Blue, RAL 5012 Protection category: IP21 Battery connections: 2 x 2 M8 bolts AC connection conductor size: 6 AWG Weight: 49 lb (22 kg) Dimensions: 24.8 x 10.9 x 6.5 in. (631 x 277 x 164 mm) Listing: UL 458 The manual specifically identifies PMP122405100 as the 60 Hz-only version of the MultiPlus-II 12/4k/160-50 120V. APPLICATIONS Recreational vehicle electrical systems Marine house-power systems Work vehicles and specialty mobile equipment Generator-supported battery systems Shore-power installations Off-grid homes and cabins Backup power systems Solar and alternative-energy installations Energy storage systems Systems supporting computers and other sensitive electronics IDEAL FOR Buyers needing a combined inverter, charger, and transfer switch 12V battery banks requiring high charging current Systems with limited shore-power or generator capacity Applications with short-duration high-starting-power loads Installations that require selected loads to shut down during battery operation Expandable systems requiring parallel, split-phase, or three-phase capability Owners who want optional remote monitoring and system configuration PROTECTION FEATURES Output short-circuit protection Inverter overload protection High battery-voltage protection Low battery-voltage protection High-temperature protection Protection against 120 VAC being present on the inverter output Excessive input-voltage-ripple protection Bulk-charge time protection Alarm and shutdown indications for overload, low battery, high temperature, and excessive DC ripple SYSTEM COMPATIBILITY Designed for nominal 12V battery banks Supports lead-acid charging with adaptive bulk, absorption, float, and storage stages Compatible with Victron Lithium Battery Smart systems when used with a VE.Bus BMS V2 or Lynx Smart BMS Other lithium batteries require verified battery and BMS compatibility and appropriate charger configuration Compatible with solar charge controllers and grid-tie inverters in supported system designs Up to six identical units may be connected in parallel Two identical units may be configured for 120/240V split-phase output Three identical units may be configured for three-phase output Compatible monitoring and control options include Cerbo GX, Ekrano GX, Digital Multi Control, VE.Bus Smart Dongle, MK3-USB, VictronConnect, VEConfigure, and VRM Optional 100 A external current sensor can support grid-parallel PowerControl and PowerAssist applications CHECK BEFORE ORDERING Confirm that the 60 Hz-only PMP122405100 version is required. The similar PMP122405110 version supports 50/60 Hz operation. Confirm the system uses a nominal 12V battery bank. Confirm the required AC output is 120V at 60 Hz. Verify that 3.4 kW continuous output is sufficient for the combined running loads. Check motor, compressor, pump, and air-conditioning startup requirements against the 6 kW peak rating. The manual recommends a 400-1200 Ah battery bank for this model. Recommended DC fuse rating is 600 A. Recommended battery cabling is two 2/0 AWG conductors per positive and negative connection for runs up to 5 m. Recommended battery cabling is two 4/0 AWG conductors per positive and negative connection for runs from 5-10 m. AC input and main-output circuits are rated for 50 A and require appropriately sized overcurrent protection. The auxiliary output is limited to 32 A and turns off during inverter-only operation. Install in a dry, well-ventilated location with adequate cooling clearance. Parallel and multi-phase systems require identical units, equal-length DC cables, VE.Bus cabling, and system configuration. An MK3-USB interface and RJ45 UTP cable are required for direct computer configuration. Confirm battery chemistry, charging voltages, BMS requirements, and temperature-sensor requirements before installation. Normalized SKU: PMP122405100