Volvo Penta 804190 Hose ClampsThis RUBBER RING 804190 is a high-quality marine rubber ring crafted of the highest quality materials offered in the industry. It is hard and used with the clamping ring. It is a perfect replacement for the original factory component, with reliable quality and dependability. Volvo Penta products, without a doubt, comply with or exceed OEM specifications, ensuring that they will fit and perform correctly with your Volvo Penta product and withstand harsh marine environments. Key Features: Top-quality Clamp Ring 100% Brand new and made with the top quality materials in the industry Meets or exceeds OEM specifications Heavy-duty Built to perform Quality rubber material Corrosion-resistant Easy to carry, store and install. Designed to provide maximum convenience and comfort Excellent performance quality, durability, and high reliability Proven and tested for outstanding dependability throughout the production process Approved marine-grade product Specifications: Brand: Volvo Penta Condition: Brand New SKU: 804190 Weight: 0.52 LBS Material: Rubber Note: For marine applications Volvo Penta Exploded view / schematic Mounting Kit, Clamp RingNormalized SKU: 804190

Seachoice 23431 Hose Clamps Stainless Steel Hose Clamp Set Includes 2 each of 7/32-5/8" and 7/16-25/32". Stainless steel. Interlocked construction - no welds, no bumps. Exceeds all SAE requirements. 2 of each size per card. Size 7/32" - 5/8" & 7/16" - 25/32" Pack 4 Normalized SKU: 23431UPC Code: 719249234311

Download LiteratureTrident Marine 720-8501 Hose Clamps316 Stainless Steel T-Bolt Clamp 3/4" Band - Range 8.25" to 8.69" *10-CountVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation. These clamps can be used on any hose connection with peace of mind that they will last you a very long time. These clamps are sold in 2 configurations; part numbers ending in “L” signify that a long T-Bolt is being used and is for our Rubber Hose products. The part number without the “L” is for our Silicone and PVC products. 3-Year Warranty. Normalized SKU: 7208501UPC Code: 704917026961Trident Marine 720-8501 Literature Download Quick Reference Guide Owners Manual

Ideal 670040006 Hose Clamps SS Hose Clamps, Size 6 67-5 Series. High-nickel grade Stainless Steel. Band & housing: 1/2'' design. Screw: 5/16'' hex-head. Normalized SKU: 670040006UPC Code: 078575108605

Ideal 63004-0048 Hose Clamps SS Hose Clamps, Size 48 High-nickel grade Stainless Steel clamp for boating applications & other corrosive environments. Screw 5/16'' hex-head. Corrosion-resistant high-nickel grade Stainless Steel. Band & housing: 9/16'' design. High-nickel grade Stainless Steel. Priced each, sold in a box of 10-only Normalized SKU: 630040048UPC Code: 078575634807

Attwood Marine 9185M1 Hose ClampsSNAP IT CLOSE CLAMPSUse on bilge pumps and shower sump systems. Install by squeezing tabs together. Can be re-used by sliding the locking grooves apart Corrosion-resistant plastic. Clamps are intended for water and waste system hoses only. For 1 3/16 inch to 1 7/18 inch O.D. hose.Attwood-Clamp-#80 Hose #9185M1 Normalized SKU: 9185M1UPC Code: 022697918512

T-H Marine 16705989 Hose Clamps The T-H Marine 16705989 is an Oetiker stepless one-ear hose clamp in 41.0mm, made from 304 stainless steel for corrosion resistance in freshwater and saltwater marine environments. Oetiker stepless clamps are a factory-standard fastening method used by OEM boat builders and engine manufacturers because they create a uniform, 360-degree seal around the hose without the pressure gaps that can occur with worm-drive screw clamps. The one-ear design is crimped with a pincer tool during installation, which permanently deforms the ear and locks the clamp at a precise diameter. Once set, the clamp cannot loosen from vibration, thermal cycling, or pressure fluctuation the way a screw clamp can back off over time. The mechanical interlock on the ear provides a visible indicator if the clamp has been tampered with or improperly installed, which is useful during inspection and service. The narrow band profile minimizes contact stress on the hose surface, reducing the risk of cutting into softer hose materials during installation. At 41.0mm, this clamp is sized for larger hose connections commonly found on livewell plumbing, bilge discharge lines, and fuel system connections. A removal tool is required to cut the clamp off during service, and a new clamp is needed for reinstallation, which is standard practice for stepless clamp systems. 1.48” - 1.61” (37.8 - 41 mm). All 304 stainless steel. Lightweight design. Specially formed strip edges reduce the risk of damage to the part being clamped. Mechanical interlock allows the use of pre-coated materials. Tampering is visible. Fast, simple, and safe installation. Sold 100 per bag Normalized SKU: 16705989UPC Code: 733572078350

T-H Marine 16705000 Hose Clamps The T-H Marine 16705000 is an Oetiker stepless one-ear hose clamp sized for hose connections in the 34.9 to 38.1mm (1.37 to 1.5 in.) range, made from 304 stainless steel throughout for corrosion resistance in freshwater and saltwater environments. Sold 100 per bag, this is a shop-quantity pack suited for marine service centers, boat builders, and riggers who go through clamps regularly and do not want to order one at a time. Oetiker stepless clamps are a factory-standard fastening method used by OEM boat builders and engine manufacturers because they create a uniform, 360-degree seal around the hose without the pressure gaps that can occur with worm-drive screw clamps. The one-ear design is crimped with a pincer tool during installation, permanently locking the clamp at a precise diameter. Once set, the clamp cannot loosen from vibration, thermal cycling, or pressure changes the way a screw clamp can back off over time. The specially formed strip edges reduce contact stress on the hose surface, lowering the risk of cutting into softer hose materials during installation. The mechanical interlock on the ear allows use of pre-coated materials and provides a visible indicator if the clamp has been tampered with or improperly installed. At 34.9 to 38.1mm, this size fits mid-range hose connections commonly found on livewell plumbing, fuel lines, and cooling system hoses. Removal requires cutting the clamp off, and a new clamp is needed for reinstallation. 1.37” - 1.5” (34.9 - 38.1 mm). All 304 stainless steel. Lightweight design. Specially formed strip edges reduce the risk of damage to the part being clamped. Mechanical interlock allows the use of pre-coated materials. Tampering is visible. Fast, simple, and safe installation. Sold 100 per bag. Normalized SKU: 16705000UPC Code: 733572074901

T-H Marine 16700040 Hose Clamps The T-H Marine 16700040 is an Oetiker stepless one-ear hose clamp sized for hose connections in the 28.4 to 31.6mm (1.12 to 1.24 in.) range, made from 304 stainless steel throughout for corrosion resistance in freshwater and saltwater environments. Sold 100 per bag, this is a shop-quantity pack suited for marine service centers, boat builders, and riggers who install or replace hose connections regularly. Oetiker stepless clamps are a factory-standard fastening method used by OEM boat builders and engine manufacturers because they create a uniform, 360-degree seal around the hose without the pressure gaps that can occur with worm-drive screw clamps. The one-ear design is crimped with a pincer tool during installation, permanently locking the clamp at a precise diameter. Once set, the clamp cannot loosen from vibration, thermal cycling, or pressure changes, the way a screw clamp can back off over time. At 28.4 to 31.6mm, this size fits smaller hose connections commonly found on 1 in. livewell plumbing, aeration lines, and smaller fuel and cooling system hoses. Removal requires cutting the clamp off, and a new clamp is needed for reinstallation, which is standard practice for stepless clamp systems. Size range: 28.4 to 31.6mm (1.12 to 1.24 in.) Material: 304 stainless steel throughout Specially formed strip edges reduce contact stress on the hose surface Mechanical interlock supports the use of pre-coated materials and makes tampering visible Requires a pincer tool for installation and a cut tool for removal Sold 100 per bag Normalized SKU: 16700040UPC Code: 733572078305

T-H Marine 16700037 Hose Clamps The T-H Marine 16700037 is an Oetiker stepless one-ear hose clamp sized for hose connections in the 26.9 to 30.1mm (1.05 to 1.18 in.) range, made from 304 stainless steel throughout for corrosion resistance in freshwater and saltwater environments. Sold 100 per bag, this is a shop-quantity pack suited for marine service centers, boat builders, and riggers who work through clamps in volume and need a reliable supply on hand. Oetiker stepless clamps are a factory-standard fastening method used by OEM boat builders and engine manufacturers because they create a uniform, 360-degree seal around the hose without the pressure gaps that can occur with worm-drive screw clamps. The one-ear design is crimped with a pincer tool during installation, permanently locking the clamp at a precise diameter. Once set, the clamp cannot loosen from vibration, thermal cycling, or pressure changes the way a screw clamp can back off over time. At 26.9 to 30.1mm, this size fits smaller hose connections commonly found on 1 in. aeration lines, livewell plumbing, and smaller fuel and cooling system hoses on outboard-powered boats. Removal requires cutting the clamp off, and a new clamp is needed for reinstallation, which is standard practice for stepless clamp systems. Size range: 26.9 to 30.1mm (1.05 to 1.18 in.) Material: 304 stainless steel throughout Specially formed strip edges reduce contact stress on the hose surface Mechanical interlock supports the use of pre-coated materials and makes tampering visible Requires a pincer tool for installation and a cut tool for removal Sold 100 per bag Normalized SKU: 16700037UPC Code: 733572078251

T-H Marine 16700031 Hose Clamps The T-H Marine 16700031 is an Oetiker stepless one-ear hose clamp sized for hose connections in the 22.4 to 25.6mm (0.88 to 1.00 in.) range, made from 304 stainless steel throughout for corrosion resistance in freshwater and saltwater environments. Sold 100 per bag, this is a shop-quantity pack suited for marine service centers, boat builders, and riggers who install or replace hose connections in volume. Oetiker stepless clamps are a factory-standard fastening method used by OEM boat builders and engine manufacturers because they create a uniform, 360-degree seal around the hose without the pressure gaps that can occur with worm-drive screw clamps. The one-ear design is crimped with a pincer tool during installation, permanently locking the clamp at a precise diameter. Once set, the clamp cannot loosen from vibration, thermal cycling, or pressure changes the way a screw clamp can back off over time. At 22.4 to 25.6mm, this is one of the smaller sizes in the Oetiker marine clamp lineup and fits 3/4 in. hose connections commonly found on livewell aeration lines, spray head fittings, and smaller fuel and cooling system hoses on outboard-powered boats. Removal requires cutting the clamp off, and a new clamp is needed for reinstallation, which is standard practice for stepless clamp systems. Size range: 22.4 to 25.6mm (0.88 to 1.00 in.) Material: 304 stainless steel throughout Specially formed strip edges reduce contact stress on the hose surface Mechanical interlock supports the use of pre-coated materials and makes tampering visible Requires a pincer tool for installation and a cut tool for removal Sold 100 per bag Normalized SKU: 16700031UPC Code: 733572074857

T-H Marine 16700024 Hose Clamps The T-H Marine 16700024 is an Oetiker stepless one-ear hose clamp sized for hose connections in the 17.8 to 21.0mm (0.70 to 0.82 in.) range, made from 304 stainless steel throughout for corrosion resistance in freshwater and saltwater environments. Sold 100 per bag, this is a shop-quantity pack suited for marine service centers, boat builders, and riggers who work through small-diameter hose connections regularly. Oetiker stepless clamps are a factory-standard fastening method used by OEM boat builders and engine manufacturers because they create a uniform, 360-degree seal around the hose without the pressure gaps that can occur with worm-drive screw clamps. The one-ear design is crimped with a pincer tool during installation, permanently locking the clamp at a precise diameter. Once set, the clamp cannot loosen from vibration, thermal cycling, or pressure changes the way a screw clamp can back off over time. At 17.8 to 21.0mm, this is the smallest size in the T-H Marine Oetiker lineup and fits 1/2 in. hose connections commonly found on fuel primer bulb fittings, small-diameter cooling hoses, and other tight plumbing connections on outboard-powered boats where a larger clamp simply will not fit. Removal requires cutting the clamp off, and a new clamp is needed for reinstallation, which is standard practice for stepless clamp systems. Size range: 17.8 to 21.0mm (0.70 to 0.82 in.) Material: 304 stainless steel throughout Specially formed strip edges reduce contact stress on the hose surface Mechanical interlock supports the use of pre-coated materials and makes tampering visible Requires a pincer tool for installation and a cut tool for removal Sold 100 per bag Normalized SKU: 16700024UPC Code: 733572074802

T-H Marine 16700020 Hose Clamps The T-H Marine 16700020 is an Oetiker stepless one-ear hose clamp sized for hose connections in the 15.3 to 18.5mm (0.60 to 0.72 in.) range, made from 304 stainless steel throughout for corrosion resistance in freshwater and saltwater environments. Sold 100 per bag, this is a shop-quantity pack suited for marine service centers, boat builders, and riggers who work with small-diameter hose connections on a regular basis. Oetiker stepless clamps are a factory-standard fastening method used by OEM boat builders and engine manufacturers because they create a uniform, 360-degree seal around the hose without the pressure gaps that can occur with worm-drive screw clamps. The one-ear design is crimped with a pincer tool during installation, permanently locking the clamp at a precise diameter. Once set, the clamp cannot loosen from vibration, thermal cycling, or pressure changes, the way a screw clamp can back off over time. At 15.3 to 18.5mm, this is one of the smallest sizes in the Oetiker marine clamp lineup and is well suited for 3/8 in. to 1/2 in. hose connections, including vacuum lines, small-diameter fuel fittings, and other tight plumbing connections on outboard-powered boats where standard clamps are simply too large to seat properly. Removal requires cutting the clamp off, and a new clamp is needed for reinstallation, which is standard practice for stepless clamp systems. Size range: 15.3 to 18.5mm (0.60 to 0.72 in.) Material: 304 stainless steel throughout Specially formed strip edges reduce contact stress on the hose surface Mechanical interlock supports the use of pre-coated materials and makes tampering visible Requires a pincer tool for installation and a cut tool for removal Sold 100 per bag Normalized SKU: 16700020UPC Code: 733572078206

T-H Marine 16700004 Hose Clamps The T-H Marine 16700004 is an Oetiker stepless one-ear hose clamp sized for hose connections in the 7.8 to 9.5mm (0.30 to 0.37 in.) range, made from 304 stainless steel throughout for corrosion resistance in freshwater and saltwater environments. Sold 100 per bag, this is a shop-quantity pack suited for marine service centers, engine technicians, and riggers who work with very small-diameter hose and tubing connections on a regular basis. Oetiker stepless clamps are a factory-standard fastening method used by OEM boat builders and engine manufacturers because they create a uniform, 360-degree seal around the hose without the pressure gaps that can occur with worm-drive screw clamps. The one-ear design is crimped with a pincer tool during installation, permanently locking the clamp at a precise diameter. Once set, the clamp cannot loosen from vibration, thermal cycling, or pressure changes, the way a screw clamp can back off over time. At 7.8 to 9.5mm, this is the smallest size in the T-H Marine Oetiker lineup and is designed for very fine hose connections, including vacuum nipples, sensor hoses, small vent lines, and other sub-3/8 in. tubing found on outboard engine systems and marine fuel components. Standard clamps cannot be used at this diameter, making this a specialty item for precise engine service work. Removal requires cutting the clamp off, and a new clamp is needed for reinstallation. Size range: 7.8 to 9.5mm (0.30 to 0.37 in.) Material: 304 stainless steel throughout Specially formed strip edges reduce contact stress on the hose surface Mechanical interlock supports the use of pre-coated materials and makes tampering visible Requires a pincer tool for installation and a cut tool for removal Sold 100 per bag Normalized SKU: 16700004UPC Code: 733572074659

T-H Marine 16700001 Hose Clamps The T-H Marine 16700001 is an Oetiker stepless one-ear hose clamp sized for hose connections in the 5.8 to 7.0mm (0.22 to 0.27 in.) range, made from 304 stainless steel throughout for corrosion resistance in freshwater and saltwater environments. Sold 100 per bag, this is a shop-quantity pack suited for marine engine technicians and service centers working with the finest-diameter tubing connections found on modern outboard engines. Oetiker stepless clamps are a factory-standard fastening method used by OEM boat builders and engine manufacturers because they create a uniform, 360-degree seal around the hose without the pressure gaps that can occur with worm-drive screw clamps. The one-ear design is crimped with a pincer tool during installation, permanently locking the clamp at a precise diameter. Once set, the clamp cannot loosen from vibration, thermal cycling, or pressure changes, the way a screw clamp can back off over time. At 5.8 to 7.0mm, this is the finest size in the T-H Marine Oetiker lineup and is intended for micro-diameter connections, including small vacuum nipples, emissions system tubing, sensor port hoses, and other precision fittings on outboard engine fuel and emissions systems where no standard clamp option exists. If you are doing factory-level engine service or rebuilding fuel system components, this is the clamp size that matches OEM specifications at that scale. Removal requires cutting the clamp off, and a new clamp is needed for reinstallation. Size range: 5.8 to 7.0mm (0.22 to 0.27 in.) Material: 304 stainless steel throughout Specially formed strip edges reduce contact stress on the hose surface Mechanical interlock supports the use of pre-coated materials and makes tampering visible Requires a pincer tool for installation and a cut tool for removal Sold 100 per bag Normalized SKU: 16700001UPC Code: 733572010015