Lewmar HM10HT150PX Anchor Rope & ChainLewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets. Normalized SKU: HM10HT150PXUPC Code: 743683406850

Marpac 7-2440 Plow AnchorsMarpac Delta EZ Launch Anchor SS 14# #7-2440Normalized SKU: 72440UPC Code: 787766724400

Windline URM-2 Anchor AccessoriesWindline Small Anchor Roller & Mount #URM-2Normalized SKU: URM2UPC Code: 798772100607

Titan Marine CAR3S91250H5120 Anchor Rope & Chain 5/16" x 20' Chain 9/16" x 250' 3-Strand Rode Normalized SKU: CAR3S91250H5120UPC Code: 628309301880

Marpac 7-2334 Plow AnchorsMarpac Delta EZ Launch Anchor 55# #7-2334Normalized SKU: 72334UPC Code: 787766723342

Greenfield Products 514-RED River AnchorsTri-fluke cast iron design recommended in soft/moderate conditions and for medium duty. The Tri-Fluke design of the River Anchor allows flukes to penetrate in soft and moderate conditions and engage rocks and structure in rivers and current. The river anchor is a great all-purpose anchor for lighter craft, or a great second anchor. Designed to hold boats under 16'.Weights vary due to metal and coating content. Listed weights are approximate. Recommended Boat Size (in winds up to 30 Knots): Boats < 16 Feet Available in various colors Designed to engage debris in river bottoms Works great as a second anchor Greenfield Products River 14lb Red Anchor 514-REDNormalized SKU: 514REDUPC Code: 025552514027

Lewmar 0057907 Claw AnchorsDesigned based on anchors used to secure oil rigs in the North Sea. The Claw anchor is constructed of high-grade steel. The Claw anchor sets effortlessly and holds in a variety of sea beds and stows easily on the bow roller of most boats. Manufactured from high grade steel Suitable for use on various sea beds Bow roller storable Normalized SKU: 0057907UPC Code: 743683406010

Seachoice 41260 Mushroom Anchors Mushroom Anchor - Black Vinyl Coated / 15 lbAluminum painted iron with a vinyl coating. For small boats and mooring buoys. One-piece cast iron in two coating choices: double dipped painted aluminum for rust resistance and heavy gauge black vinyl for hull protection. Most effective in sand or mud.Normalized SKU: 41260UPC Code: 719249412603

Seachoice 43940 Pyramid Anchor Pyramid Anchor - 250 LbPyramid anchors provide excellent holding power and work in tidal waters and rocky or sandy bottoms. They are superior to concrete blocks because the anchor rapidly sets itself by presenting a digging edge to penetrate the bottom. The pyramid shape presents a large surface area which creates high suction that increases the deeper it sets. The short shank allows mooring in shallower waters without chain wrap-up, a characteristic of mushroom anchors. Painted cast iron.  Weight 250 lbs. Boat Size 25'-29' Required truck freight shipping Normalized SKU: 43940UPC Code: 719249439402

Seachoice 43900 Pyramid Anchor Pyramid Anchor - 75 PoundPyramid anchors provide excellent holding power and work in tidal waters and rocky or sandy bottoms. They are superior to concrete blocks because the anchor rapidly sets itself by presenting a digging edge to penetrate the bottom. The pyramid shape presents a large surface area which creates high suction that increases the deeper it sets. The short shank allows mooring in shallower waters without chain wrap-up, a characteristic of mushroom anchors. Painted cast iron. Not available in all locations. Weight 75 lbs. Boat Size 14'-16' Normalized SKU: 43900UPC Code: 719249439006

Trac Outdoors 69004 Windlass & Anchor WinchesFeatures touch and release TRAC Auto Deploy. Anchor powers down smoothly and quietly. When the anchor reaches bottom, the winch will transition from steady power-deploy and begin releasing rope just a few feet at a time, until there is enough rope out, or can be locked with the touch of any switch or remote button. More rope may be released by powering the rope IN or OUT. Press the Auto Deploy button again if the anchor drags due to changing conditions, such as wind or current. Rugged all steel gears. Max anchor capacity 25-30 lbs. , Avg boat length up to 22'. 3 button operation – UP / DOWN / AUTO DEPLOY. Speed: Up to 100'/90 seconds. Davit can be installed separately or attached. Includes 100’ of 0.20” double braided anchor rope, automatic resetting circuit breaker, sealed membrane switch, 16' length of 12-gauge marine grade battery wire, anchor safety chain and wireless remote.Normalized SKU: 69004UPC Code: 666996102083

Lewmar 0057210 Plow AnchorsLewmar 10kg/22lb DTX Stainless Steel AnchorModel: 0057210 Manufactured from 316 stainless steel Self launching Ordinary Holding Power certified Guaranteed for 3 years against breakage Every DTX anchor is certified to Lloyd's Ordinary Holding Power standard. The new DTX anchor fills the gap between the existing galvanised and stainless Delta® anchors, allowing boat owners and builders to specify a stainless steel anchor for a significantly reduced outlay.Made from 316 stainless steel, the DTX anchors feature exceptional anti-corrosional performance and the enhanced aesthetics that stainless anchors offer. Utilising lead ballast encapsulated within the tip of the anchor to achieve the perfect centre of gravity, the DTX offers the initial bite and holding reliability that users of our Delta® anchors have come to expect.Normalized SKU: 0057210UPC Code: 743683306600

Tie Down Engineering 94019 Fluke AnchorsThe Danforth® Hi-Tensile is our toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Each shank is made from drop forged steel. Hot dipped galvanized finish.Tie Down Engineering Danforth 5 lb Hi-Tensile Anchor 94019Normalized SKU: 94019UPC Code: 081628940190

Perko 1681DP0CHR Anchor-Masthead Lights The Perko 1681DP0CHR is a 13-1/2 in. folding horizontal-mount LED combination masthead and anchor light, certified to USCG 3nm (3-mile) visibility standards. The horizontal mount design positions the light parallel to the deck surface rather than vertical, which suits low-profile bow rails, T-tops, and hardtop mounting points where a vertical pole would interfere with clearance or storage. The pole folds down 90 degrees in either direction opposite the attachment plate, making it easy to lower the light for trailering, bridge clearance, or storage without removing the fixture entirely. Two light compartments handle masthead and anchor functions in a single fixture. Each compartment draws 2.2W and 0.2A at 12V, keeping the total electrical load minimal on a 12V house circuit. The 3/4 in. diameter anodized aluminum pole stands 13-1/2 in. tall when deployed, with a base footprint of 2 in. by 1-1/2 in. and a center-to-center base dimension of 1-3/8 in. for mounting hole layout. Gold-plated contacts at the electrical connection resist corrosion from spray and moisture exposure. Mounting uses #8 screws. The housing is black polymer with a chrome-plated zinc alloy insert and a clear polymer lens, matching the same construction as other Perko navigation lights in the series. This is a direct replacement for existing horizontal-mount Perko masthead and anchor light installations. Confirm your base dimensions and pole diameter before ordering if replacing an existing fixture. USCG certified: 3nm (3-mile) visibility Mount type: horizontal, folding 90 degrees in either direction Voltage: 12V LED Power: 2.2W / 0.2A per compartment Pole: 3/4 in. diameter anodized aluminum Height: 13-1/2 in. Base dimensions: 2 in. x 1-1/2 in., center-to-center 1-3/8 in. Mounting screw: #8 Gold-plated contacts Housing: black polymer with chrome-plated zinc alloy insert and clear polymer lens Wiring Note: When choosing LED upgrades to replace existing incandescent combination masthead/all-round lights, optional Cat. No. 1680DP012V Converter Module is available to avoid re-wiring the navigation light switch.Because direct wire-to-wire substitution of an older style incandescent light with this new style L.E.D. light will not work, there are two installation alternatives:1) Rewire the existing switch to match the diagram supplied in the L.E.D. light instructions or,2) Use the optional converter module (Cat. No 1680DP012V) and follow the wiring in the instructions provided with the new L.E.D. light so that no rewiring of the switch is necessary. Normalized SKU: 1681DP0CHRUPC Code: 085226782251

Seachoice 41727 Slip-Ring Anchors PVC Coated Slip-Ring Anchor, WhiteProvides protection to boat finishes from scratches and abrasions.Normalized SKU: 41727UPC Code: 719249417271

Sea-Dog 181212-1 Anchor AccessoriesSea-Dog Jaw & Eye Swivel 1/2" #181212-1Normalized SKU: 1812121UPC Code: 035514181112