-17% sale
T-Spec Qualifies for Free Shipping T-Spec 2-Position Distribution Block with Cover #VDB2
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec 2-Position Distribution Block with Cover #VDB2 $38.08 $45.45
T-Spec VDB2 Bus BarsVDB2 2-Position Distribution Block with CoverT-Spec designed their VDB2 distribution block to handle the high-current power distribution for two (2) power sources while keeping your wiring connected securely and looking neat.   You can also use this hefty little block to combine the ground wires of two (2) sources to a single grounding point.  Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover protects your connections from the weather.Features: One (1) 1/0 to 4 AWG into two (2) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate lock technology In the Box: Distribution block with one (1) 1/0 set-screw input and two (2) 4 or 8 AWG set-screw outputs Plastic cover (attached) 3 Rubber grommets and sleeves (pre-installed on input and outputs) Two 1/2" screws *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VDB2UPC Code: 086429390625
Sold out -15% sale
T-Spec Qualifies for Free Shipping T-Spec 4-Position Battery Terminal Distribution Block #V-BATT-TML
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec 4-Position Battery Terminal Distribution Block #V-BATT-TML $39.99 $46.98
Download LiteratureT-Spec V-BATT-TML Bus Bars4 Position Battery Terminal - POS/NEGThe V-BATT-TML is a four-position battery terminal that can accept up to (2) 1/0 AWG and (2) 4 AWG, down to (4) 10 AWG wires.  It includes all markers and hardware to be used for the positive or negative post. Features: Four (4) Outputs - (2) 1/0 AWG – 10 AWG plus (2) 4 AWG – 10 AWG  Compact design for simpler installation Solid brass construction for maximum conductivity Nickel finish for durability Positive and Negative marker plates included Negative post sleeve included In the Box: Brass battery terminal Negative post sleeve (pre-installed) Black "negative" marker plate (pre-installed) Red "positive" marker plate Two 10mm hex-socket screws 2 Rubber hole-caps 4mm Allen key 1.5mm Allen key *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VBATTTMLUPC Code: 086429364411T-Spec V-BATT-TML Literature Download Product Brochure
Sold out -17% sale
T-Spec Qualifies for Free Shipping T-Spec 4-Position Distribution Block with Cover #VDB4
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec 4-Position Distribution Block with Cover #VDB4 $38.09 $45.70
T-Spec VDB4 Bus BarsVDB4 4-Position Distribution Block with CoverT-Spec designed their VDB4 distribution block to handle the high-current power distribution for four (4) power sources while keeping your wiring connected securely and looking neat.   You can also use this hefty little block to combine the ground wires of four (4) sources to a single grounding point.  Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover protects your connections from the weather. Features: One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate lock technology In the Box: Distribution block with one (1) 1/0 set-screw input and four (4) 4 or 8 AWG set-screw outputs Plastic cover (attached) 3 Rubber grommets and sleeves (pre-installed on input and outputs) Two 1/2" screws *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VDB4UPC Code: 086429390632
-17% sale
T-Spec Qualifies for Free Shipping T-Spec 8-Position Battery Terminal Distribution Block #VBTPN
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec 8-Position Battery Terminal Distribution Block #VBTPN $44.76 $53.71
T-Spec VBTPN Bus Bars8 Position Battery Terminal - POS/NEGThe VBTPN is an eight-position battery terminal that can accept up to (4) 4/8/10 AWG set screw outputs and (4) 1/0 to 10  AWG ring terminal outputs.  It includes (1) positive and (1) negative bolt-on posts for retaining the factory vehicle terminal.Features: Compact design for simpler installation Solid brass construction for maximum conductivity Nickel finish  Gate Lock Technology In the Box: Positive and Negative post Adapter sleeve T20 Torx® screws *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VBTPNUPC Code: 086429390595
-17% sale
T-Spec Qualifies for Free Shipping T-Spec AGU Fuse 5-pk 40a #V8-AGU40
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec AGU Fuse 5-pk 40a #V8-AGU40 $9.95 $11.88
T-Spec V8-AGU40 Fuses & Fuse PanelsV8 Series 40 AMP AGU Fuse - 5 PackT-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit.  Each of these heavy-duty fuses features a window through which you can visually check the fuse's status.Features: Nickel plated Status window *Sold as a 5 PackWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: V8AGU40UPC Code: 086429272341
Sold out
T-Spec Qualifies for Free Shipping T-Spec AGU Fuse 5-pk 50a #V8-AGU50
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec AGU Fuse 5-pk 50a #V8-AGU50 $8.99
T-Spec V8-AGU50 Fuses & Fuse PanelsV8 Series 50 AMP AGU Fuse - 5 PackT-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit.  Each of these heavy-duty fuses features a window through which you can visually check the fuse's status.Features: Nickel plated Status window *Sold as a 5 PackWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: V8AGU50UPC Code: 086429272365
Sold out
T-Spec Qualifies for Free Shipping T-Spec AGU Fuse 5-pk 60a #V8-AGU60
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec AGU Fuse 5-pk 60a #V8-AGU60 $8.99
T-Spec V8-AGU60 Fuses & Fuse PanelsV8 Series 60 AMP AGU Fuse - 5 PackT-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit.  Each of these heavy-duty fuses features a window through which you can visually check the fuse's status.Features: Nickel plated Status window *Sold as a 5 PackWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: V8AGU60UPC Code: 086429272389
Sold out
T-Spec Qualifies for Free Shipping T-Spec AGU Fuse Holder 4/8 AWG #VAGU
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec AGU Fuse Holder 4/8 AWG #VAGU $14.99
T-Spec VAGU Fuses & Fuse PanelsVAGU AGU Fuse Holder 4 to 8 AWGFusing an aftermarket stereo system provides protection for your car and your car stereo.  No fuse system provides better protection than T-Spec.  The new T-Spec compact brass designs are constructed from solid brass and are smaller than anything else in the industry.  This combination of top quality materials and thoughtful design provides an incredibly reliable and simple to install product that will last for years. Features:Compact fuse holder with 360° rotating base Accepts an AGU fuse (not included) Connects to 4 to 8 gauge power wire Black nickel-plated brass construction  Anodized finish resists rust Impact-resistant polycarbonate cover Fastening screws can be used with a variety of tools T20 Torx® screws Gate Lock technology In the Box:AGU fuse holder Plastic cover 2 Rubber grommets (pre-installed) Installation sheet *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VAGUUPC Code: 086429391141
-17% sale
T-Spec Qualifies for Free Shipping T-Spec ANL Fuse Holder Fixed 1/0 to 4 AWG #VANL1
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec ANL Fuse Holder Fixed 1/0 to 4 AWG #VANL1 $35.74 $42.66
T-Spec VANL1 Fuses & Fuse PanelsVANL1 ANL Fuse Holder - 1/0 to 4 AWGIt can be tough to find a good place for your system's fuse holder in a crowded engine compartment.  T-SPEC helps you out with their extremely compact ANL fuse holder for 1/0-gauge wire that can fit almost anywhere. Black nickel-plated brass construction ensures excellent current flow, while a polycarbonate cover protects the fuse against impacts and dirt. Features: Compact fuse holder Accepts an ANL fuse (not included) Connects to 1/0 to 4 gauge power wire Black nickel-plated brass  Anodized finish resists rust Impact-resistant polycarbonate cover Fuse fastening screws can be used with a variety of tools TPE wrapped soft touch Dual sizes gasket set Water resistant In the Box: ANL fuse holder Plastic cover 2 Rubber grommets (pre-installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VANL1UPC Code: 086429390601
Sold out
T-Spec Qualifies for Free Shipping T-Spec Dual Manl Fuse Holder Fixed 1/0 to 4/8 AWG #VDMANL
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec Dual Manl Fuse Holder Fixed 1/0 to 4/8 AWG #VDMANL $40.99
T-Spec VDMANL Fuses & Fuse PanelsVDMANL DUAL Mini-ANL Fuse Holder - 1/0 to 4/8 AWGT-SPEC'S VDMANL Dual fuse holder ensures excellent current flow by using sturdy, lock-down fasteners to secure your power cable, so you don't have to worry about it getting loose over time.  Combine this with solid brass construction and water resistance, and you've got a great link between your amp and your battery that will protect your electrical system.The T-SPEC VDMANL Dual fuse holder accepts 1/0 to 4/8 gauge power cables and mini-ANL fuses.Features: Accepts mini-ANL fuses Connects to 1/0 to 4/8 gauge power cable Solid brass construction  Impact resistant polycarbonate cover Black nickel finish Water resistant T20 Torx® screws Gate Lock technology In the Box: One (1) mini-ANL fuse holder Two (2) Threaded end-caps 1/0 and 4 /8 gauge rubber grommets (pre-installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VDMANLUPC Code: 086429395194
-17% sale
T-Spec Qualifies for Free Shipping T-Spec Manl 2-Position All-In-One Distribution Block #VPNB2
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec Manl 2-Position All-In-One Distribution Block #VPNB2 $38.09 $45.70
T-Spec VPNB2 Bus BarsVPNB2 MANL 2 Position All-In-One Distribution Block with CoverT-Spec designed VPNB2 distribution block to handle the high-current power and ground distribution for two (2) power sources, and protect them each with a mini-ANL fuse.  This hefty little block distributes power from one (1) 1/0-gauge positive power cable to two (2) 4- to 8-gauge power leads, each routed through a mini-ANL fuse. Then, the same block receives the amps' two ground wires and combines them for a single 1/0-gauge ground cable.Fuses sold separately. Features: (2 positive) 1/0 to 4 AWG in to (2 positives) 4/8 AWG out (1 negative) 1/0 to 4 AWG in to (2 negatives) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate Lock technology In the Box: Distribution block for both power and ground Plastic cover (attached) 2 Rubber grommets and sleeves on power inputs (installed) 2 Rubber grommets and sleeves on power outputs (installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VPNB2UPC Code: 086429390649
Sold out
T-Spec Qualifies for Free Shipping T-Spec Manl 2-Position Distribution Block with Cover #VFDB2
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec Manl 2-Position Distribution Block with Cover #VFDB2 $38.99
T-Spec VFDB2 Bus BarsVFDB2 MANL 2 Position Distribution Block with CoverThis compact distribution block from T-Spec will handle the high-current power distribution for your single source to two (2) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused.   T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools.   Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.  Fuses sold separately. Features: One (1) 1/0 to 4 AWG in to two (2) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate Lock technology In the Box: One distribution block for mini-ANL fuses with one (1) 4 or 1/0 AWG set-screw input and two (2) 4/8 AWG set-screw outputs Plastic cover (attached) 3 Rubber grommets and sleeves (pre-installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VFDB2UPC Code: 086429390656
Sold out
T-Spec Qualifies for Free Shipping T-Spec Manl 4-Position All-In-One Distribution Block #VPNB4
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec Manl 4-Position All-In-One Distribution Block #VPNB4 $61.99
T-Spec VPNB4 Bus BarsVPNB4 MANL 4 Position All-In-One Distribution Block with CoverT-Spec designed VPNB4 distribution block to handle the high-current power and ground distribution for four (4) power sources, and protect them each with a mini-ANL fuse.  This hefty little block distributes power from one (1) 1/0-gauge positive power cable to four (4) 4 to 8 gauge power leads, each routed through a mini-ANL fuse. Then, the same block receives the amps' two ground wires and combines them for a single 1/0 to 4 gauge ground cable.Fuses sold separately. Features: (2 positive) 1/0 to 4 AWG in to (4 positives) 4/8 AWG out (1 negative) 1/0 to 4 AWG in to (4 negatives) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate Lock technology In the Box: Distribution block for both power and ground Plastic cover (attached) 3 Rubber grommets and sleeves on power inputs (installed) 2 Rubber grommets and sleeves on power outputs (installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VPNB4UPC Code: 086429390670
-17% sale
T-Spec Qualifies for Free Shipping T-Spec Manl 4-Position Distribution Block with Cover #VFDB4
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec Manl 4-Position Distribution Block with Cover #VFDB4 $52.61 $63.13
T-Spec VFDB4 Bus BarsVFDB4 MANL 4 Position Distribution Block with CoverThis compact distribution block from T-Spec will handle the high-current power distribution for your single source to four (4) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused.   T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools.   Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.  Fuses sold separately. Features: One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate Lock technology In the Box: One distribution block for mini-ANL fuses with one (1)  4 or 1/0 AWG set-screw input and four (4) 4/8 AWG set-screw outputs Plastic cover (attached) 3 Rubber grommets and sleeves (pre-installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VFDB4
-17% sale
T-Spec Qualifies for Free Shipping T-Spec Manl Fuse Holder 4/8 AWG #VMANL
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec Manl Fuse Holder 4/8 AWG #VMANL $15.79 $18.85
T-Spec VMANL Fuses & Fuse PanelsVMANL Mini-ANL Fuse Holder - 4 to 8 AWGT-SPEC'S VMANL fuse holder ensures excellent current flow by using sturdy, lock-down fasteners to secure your power cable, so you don't have to worry about it getting loose over time.  Combine this with solid brass construction and water resistance, and you've got a great link between your amp and your battery that will protect your electrical system.The T-SPEC VMANL fuse holder accepts 4 to 8 gauge power cables and mini-ANL fuses.Features: Compact fuse holder with 360° rotating base Accepts mini-ANL fuses Connects to 4- to 8-gauge power cable Solid brass construction  Black nickel finish Water resistant T20 Torx® screws Gate Lock technology In the Box: One (1) mini-ANL fuse holder Two (2) Threaded end-caps 4 and 8 gauge rubber grommets (pre-installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VMANLUPC Code: 086429391158
-17% sale
T-Spec Qualifies for Free Shipping T-Spec Manl Fuse Holder Fixed 1/0 to 4 AWG #VMANL1
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec Manl Fuse Holder Fixed 1/0 to 4 AWG #VMANL1 $30.67 $36.61
T-Spec VMANL1 Fuses & Fuse PanelsVMANL1 Mini-ANL Fuse Holder - 1/0 to 4 AWGT-SPEC'S VMANL 1fuse holder ensures excellent current flow by using sturdy, lock-down fasteners to secure your power cable, so you don't have to worry about it getting loose over time.  Combine this with solid brass construction and water resistance, and you've got a great link between your amp and your battery that will protect your electrical system.The T-SPEC VMANL1 fuse holder accepts 1/0 to 4 gauge power cables and mini-ANL fuses.Features: Compact fuse holder  Accepts mini-ANL fuses Connects to 1/0 to 8 gauge power cable Black nickel finish Water resistant T20 Torx® screws Gate Lock technology In the Box: One (1) mini-ANL fuse holder Two (2) Threaded end-caps 1/0 and 4 gauge rubber grommets (pre-installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VMANL1UPC Code: 086429390700
Sold out
T-Spec Qualifies for Free Shipping T-Spec V10 4 AWG Add-a-Amp Kit 10' #V10-D104K
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec V10 4 AWG Add-a-Amp Kit 10' #V10-D104K $198.99
Watch VideoT-Spec V10-D104K AccessoriesV10-D104K 4 Gauge Add-A-Amp Kit for 1/0 Gauge WireIf you've already installed a 1/0 AWG amplifier wiring kit in your boat, the T-Spec V10-D108K 4 AWG wiring kit will let you add another amplifier to your system.  This water-resistant kit includes everything you need to send power to your new marine amplifier.With 4 AWG wire, you'll get long life and maximum power transfer. This kit includes two brass distribution blocks, 10' power and ground wires, a 20' remote turn-on wire, installation hardware and wire ties for installation. Does not include RCA cables or speaker wire.Features: Complete marine amplifier wiring kit Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more Marine-compliant cable In the Box: 4 AWG pearl White OFC copper wire - 10' 4 AWG matte Grey OFC copper wire - 10' 18 AWG Blue wire - 10' 2 Distribution blocks w/snap-on covers (One 1/0 AWG input to 4 AWG ouptut) Ten (10) 6" Wire ties Two (2) 4 AWG crimp-on spade terminals (non-insulated) One (1) 18 AWG crimp-on spade terminal (insulated) One (1) 18 AWG crimp-connector Four (4) 12 mm Phillips-head screws Two (2) Insulating boots for 4 AWG spade terminals Instruction sheet *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: V10D104KUPC Code: 086429307029T-Spec V10-D104K Video
Sold out -20% sale
T-Spec Qualifies for Free Shipping T-Spec V10 4 AWG Amp Kit 10' #V10-1041
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec V10 4 AWG Amp Kit 10' #V10-1041 $102.56 $127.31
Watch VideoT-Spec V10-1041 AccessoriesV10-1041 4 Gauge Amp Wiring Kit - 10' (3.05 M)A marine amplifier has to stand up to the rigors of life on the water, and so does the wiring kit you use with it.  The T-Spec V10-1041 Amp Kit is ideal for most single marine amps with a power rating of up to 1000 watts and will give you reliable power for seasons to come.Features: Complete marine amplifier wiring kit Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more Marine-compliant cable In the Box:4 AWG pearl White OFC copper wire - 10' 4 AWG matte Grey OFC copper wire - 10' 18 AWG Blue wire - 20' (1) 100 amp circuit breaker (1) 1/0 AWG ring terminal with White boot (1) 1/0 AWG ring terminal with Silver boot (10) 6" Wire ties *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: V101041UPC Code: 086429303991T-Spec V10-1041 Video
Sold out
T-Spec Qualifies for Free Shipping T-Spec V10 4 AWG Amp Kit 20' #V10-2041
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec V10 4 AWG Amp Kit 20' #V10-2041 $279.99
Watch VideoT-Spec V10-2041 AccessoriesV10-2041 4 Gauge Amp Wiring Kit - 20' (6.1 M)A marine amplifier has to stand up to the rigors of life on the water, and so does the wiring kit you use with it.  The T-Spec V10-2041 Amp Kit is ideal for most single marine amps with a power rating of up to 1000 watts and will give you reliable power for seasons to come.Features: Complete marine amplifier wiring kit Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more Marine-compliant cable In the Box:4 AWG pearl White OFC copper wire - 20' 4 AWG matte Grey OFC copper wire - 20' 18 AWG Blue wire - 20' (1) 100 amp circuit breaker (1) 1/0 AWG ring terminal with White boot (1) 1/0 AWG ring terminal with Silver boot (10) 6" Wire ties *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: V102041UPC Code: 086429304004T-Spec V10-2041 Video
Sold out -20% sale
T-Spec Qualifies for Free Shipping T-Spec V10 8 AWG Add-a-Amp Kit for 4 AWG Power Kits #V10-D108K
00
DAYS 00
HRS 00
MIN 00
SEC
T-Spec T-Spec V10 8 AWG Add-a-Amp Kit for 4 AWG Power Kits #V10-D108K $86.65 $107.57
Watch VideoT-Spec V10-D108K AccessoriesV10-D108K 8 Gauge Add-A-Amp Kit for 4 Gauge WireIf you've already installed a 4 AWG amplifier wiring kit in your boat, the T-Spec V10-D108K 8 AWG wiring kit will let you add another amplifier to your system.  This water-resistant kit includes everything you need to send power to your new marine amplifier.With 8 AWG wire, you'll get long life and maximum power transfer. This kit includes two brass distribution blocks, 10' power and ground wires, a 20' remote turn-on wire, installation hardware, and wire ties for installation. Does not include RCA cables or speaker wire.Features: Complete marine amplifier wiring kit Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more Marine-compliant cable In the Box:8 AWG pearl White OFC copper wire - 10' 8 AWG matte Grey OFC copper wire - 10' 18 AWG Blue wire - 10' 2 Distribution blocks w/snap-on covers (One 4 AWG input to 8 AWG ouptut) Ten (10) 6in Wire ties Four (4) 8 AWG crimp-on spade terminals (non-insulated) One (1) 18 AWG crimp-on spade terminal (insulated) One (1) 18 AWG crimp-connector Four (4) 12 mm Phillips-head screws Two (2) Insulating boots for 8 AWG spade terminals Instruction sheet *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: V10D108KUPC Code: 086429307036T-Spec V10-D108K Video

Frequently Asked Questions

First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!

Yes, we offer FREE Shipping on most orders over $149 to US-48*.

Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.

  • Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
  • Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
  • Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
  • Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
  • Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
  • In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store

Below the price of the item, on the product page, there is a message indicating the availability of the product.

The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.

We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.

If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.

Free Shipping

On most orders $149+ to the continental 48 US states.

Secure Shopping

Fast, secure checkout with a variety of payment methods.

Shop with confidence

25+ years serving the marine industry.

Support center

Need help? Contact us via live chat, phone, or email.

© 2026 First Choice Marine.