Gtechniq C1 0.03 Restoration & ProtectantsC1 Crystal Lacquer - 30mlC1 Crystal Lacquer is the perfect entry point for anyone new to ceramic coating, or for enthusiasts who want durable protection without a complicated process. This ceramic coating bonds directly to your car’s paint, becoming the functional exterior surface of your vehicle and delivering long-lasting protection for up to five years.The coating forms a hard crystalline film that resists swirl marks and minor scratches from everyday hand wash routines. C1 guards your clear coat against bird droppings, tree sap, and UV rays while maintaining a glossy finish that won’t fade in direct sunlight. Unlike our other coatings, C1 will set up on any type of automotive paintwork due to its reaction with oxygen in the air. This makes it the ideal choice for specialty paint finishes like matte, satin, single-stage paint, or very soft clearcoats where other higher solvent coatings like Crystal Serum Light can be more difficult to install.Features: Up to 5 years of durability Crystal clear finish Easy application Simple steps to help you get the best results: Only apply in temperatures 5°c and above, indoors, out of direct sunlight Wear the gloves provided Soak the application pad with several drops of product Replace the lid on the bottle and set to one side – holding in your hand while detailing your car may promote premature curing Spread product on a small panel, or a large panel, at a time Remove residue immediately with a MF1 ZeroR Microfibre Buff Cloth You may need to buff the same area several times to remove residue, so use at least two MF1 cloths at any one time. Make sure you rotate the cloths quickly so that the C1 does not cure in them – this can make residue harder to remove Change your application pad after 3 to 4 applications If you miss removing residue and it cures fully, you should re-polish this area and reapply C1 As soon as you finish, put your microfibres in water; wash them as soon as you can to prevent the product crystallising and making them unusable Leave your vehicle indoors for 12 hours before exposing it to the elements If you are applying EXO Ultra Durable Hydrophobic Coating or C2 Liquid Crystal over the C1, leave at least 4 hours before application Store in a cool, dry place Use product within 3 months of opening Normalized SKU: C1003UPC Code: 5060147721140

Gtechniq C1 0.05 Restoration & ProtectantsC1 Crystal Lacquer - 50mlC1 Crystal Lacquer is the perfect entry point for anyone new to ceramic coating, or for enthusiasts who want durable protection without a complicated process. This ceramic coating bonds directly to your car’s paint, becoming the functional exterior surface of your vehicle and delivering long-lasting protection for up to five years.The coating forms a hard crystalline film that resists swirl marks and minor scratches from everyday hand wash routines. C1 guards your clear coat against bird droppings, tree sap, and UV rays while maintaining a glossy finish that won’t fade in direct sunlight. Unlike our other coatings, C1 will set up on any type of automotive paintwork due to its reaction with oxygen in the air. This makes it the ideal choice for specialty paint finishes like matte, satin, single-stage paint, or very soft clearcoats where other higher solvent coatings like Crystal Serum Light can be more difficult to install.Features: Up to 5 years of durability Crystal clear finish Easy application Simple steps to help you get the best results: Only apply in temperatures 5°c and above, indoors, out of direct sunlight Wear gloves provided Soak the application pad with several drops of product Replace the lid on the bottle and set to one side – holding in your hand while detailing your car may promote premature curing Spread product on a small panel, or a large panel, at a time Remove residue immediately with a MF1 ZeroR Microfibre Buff Cloth You may need to buff the same area several times to remove residue, so use at least two MF1 cloths at any one time. Make sure you rotate the cloths quickly so that the C1 does not cure in them – this can make residue harder to remove Change your application pad after 3 to 4 applications If you miss removing residue and it cures fully, you should re-polish this area and reapply C1 As soon as you finish, put your microfibres in water; wash them as soon as you can to prevent the product crystallising and making them unusable Leave your vehicle indoors for 12 hours before exposing it to the elements If you are applying EXO Ultra Durable Hydrophobic Coating or C2 Liquid Crystal over the C1, leave at least 4 hours before application Store in a cool, dry place Use product within 3 months of opening Normalized SKU: C1005UPC Code: 5060147721133

Gtechniq C2 1 Restoration & ProtectantsC2 Ceramic Sealant - 1 LiterC2 Ceramic Sealant is a ceramic spray coating that delivers durable protection and a deep gloss to your vehicle’s paint. Our spray sealant bonds at the molecular level with your clear coat, creating a hydrophobic layer that repels water spots, bird droppings, and environmental contaminants far longer than traditional wax.Version 4 brings additional performance gains: +4% increase in water contact angle for improved hydrophobic properties +7% boost in oil repellency +13% improvement in surface-free energy for enhanced self-cleaning properties The result is a ceramic sealant that keeps your car looking cleaner between washes while providing UV resistance to protect against fading. C2 works on painted surfaces, plastic trim, matte finishes, and paint protection film, making it a versatile ceramic sealant product for your entire vehicle.Simple Steps To Help You Get The Best Results: Shake the spray bottle well before use Do not apply in direct sunlight or on hot surfaces, and wear gloves Spray onto a clean Gtechniq MF1 ZeroR Microfibre Buff Cloth, wipe onto the car working in small sections Buff with a second dry microfiber towel for a glossy finish Layer for increased gloss and surface protection C2 can be used as a drying aid by spraying onto a wet surface and drying with an MF4 Diamond Sandwich Microfibre Drying Towel Store in a cool, dry place and use within 12 months of opening Normalized SKU: C21UPC Code: 5060147721287

Gtechniq C2 0.25 Restoration & ProtectantsC2 Ceramic Sealant - 250mlC2 Ceramic Sealant is a ceramic spray coating that delivers durable protection and a deep gloss to your vehicle’s paint. Our spray sealant bonds at the molecular level with your clear coat, creating a hydrophobic layer that repels water spots, bird droppings, and environmental contaminants far longer than traditional wax.Version 4 brings additional performance gains: +4% increase in water contact angle for improved hydrophobic properties +7% boost in oil repellency +13% improvement in surface-free energy for enhanced self-cleaning properties The result is a ceramic sealant that keeps your car looking cleaner between washes while providing UV resistance to protect against fading. C2 works on painted surfaces, plastic trim, matte finishes, and paint protection film, making it a versatile ceramic sealant product for your entire vehicle.Simple Steps To Help You Get The Best Results: Shake the spray bottle well before use Do not apply in direct sunlight or on hot surfaces, and wear gloves Spray onto a clean Gtechniq MF1 ZeroR Microfibre Buff Cloth, wipe onto the car working in small sections Buff with a second dry microfiber towel for a glossy finish Layer for increased gloss and surface protection C2 can be used as a drying aid by spraying onto a wet surface and drying with an MF4 Diamond Sandwich Microfibre Drying Towel Store in a cool, dry place and use within 12 months of opening Normalized SKU: C2025UPC Code: 5060147721263

Gtechniq C2 0.5 Restoration & ProtectantsC2 Ceramic Sealant - 500mlC2 Ceramic Sealant is a ceramic spray coating that delivers durable protection and a deep gloss to your vehicle’s paint. Our spray sealant bonds at the molecular level with your clear coat, creating a hydrophobic layer that repels water spots, bird droppings, and environmental contaminants far longer than traditional wax.Version 4 brings additional performance gains: +4% increase in water contact angle for improved hydrophobic properties +7% boost in oil repellency +13% improvement in surface-free energy for enhanced self-cleaning properties The result is a ceramic sealant that keeps your car looking cleaner between washes while providing UV resistance to protect against fading. C2 works on painted surfaces, plastic trim, matte finishes, and paint protection film, making it a versatile ceramic sealant product for your entire vehicle.Simple Steps To Help You Get The Best Results: Shake the spray bottle well before use Do not apply in direct sunlight or on hot surfaces, and wear gloves Spray onto a clean Gtechniq MF1 ZeroR Microfibre Buff Cloth, wipe onto the car working in small sections Buff with a second dry microfiber towel for a glossy finish Layer for increased gloss and surface protection C2 can be used as a drying aid by spraying onto a wet surface and drying with an MF4 Diamond Sandwich Microfibre Drying Towel Store in a cool, dry place and use within 12 months of opening Normalized SKU: C205UPC Code: 5060147721270

Gtechniq C3 0.5 Restoration & ProtectantsC3 Hydro Coat - 500mlHydro Coat is the fastest and easiest way to add instant hydrophobic protection to your paintwork. This easy-to-apply product instantly bonds to the surface, leaving behind an incredibly slick and glossy surface, making ongoing maintenance quick and easy. Hydro Coat will provide incredible dirt repellency for up to 3 months. Normalized SKU: C305UPC Code: 5060147726084

Gtechniq C4 0.015 Restoration & ProtectantsC4 Permanent Trim Restorer - 15mlC4 Permanent Trim Restorer brings faded exterior trim back to like-new condition. Exposure to UV rays, road grime, and weather conditions can leave black plastic trim looking gray and chalky. Our plastic trim restorer bonds to the plastic surface at a molecular level, restoring the original color while providing long-lasting protection.Unlike typical trim dressing or black plastic restorer products that leave behind a greasy residue, C4 provides a natural finish with no oily buildup. It works across a wide range of exterior plastics, including rear bumper trim, front bumper accents, door handles, fender flares, license plate surrounds, and textured rubber surfaces.Features: Up to 2 years of durability Restores trim to ‘as new’ condition For use on all exterior trim Simple Steps To Help You Get The Best Results: Make sure you have enough product for all of your trim; an SUV (30ml) requires more than a small sedan (15ml) Work in a well-ventilated area at a temperature above 5°C (41°F) on a cool surface out of direct sunlight; wear the gloves provided Ensure the plastic surface is free from contaminants; for best results, clean trim with a neat solution of W5 Citrus All Purpose Cleaner and a medium-stiff brush to remove old dressings Use the AP1 Lint-free Applicator supplied to spread the coating onto each trim piece; soak the applicator pad with a small amount of product Once you have spread the product over each piece of trim, gently wipe away residue immediately with an MF1 ZeroR Microfibre Buff Cloth If your car has heavily textured trim, take time to ensure all crevices are covered and that all residue is removed Allow the coating to cure for 12 hours before exposing to the elements For enhanced durability, apply a second coat after the first has cured Use within 3 months of opening Store in a cool, dry place Normalized SKU: C40015UPC Code: 5060147721416

Gtechniq C4 0.03 Restoration & ProtectantsC4 Permanent Trim Restorer - 30mlC4 Permanent Trim Restorer brings faded exterior trim back to like-new condition. Exposure to UV rays, road grime, and weather conditions can leave black plastic trim looking gray and chalky. Our plastic trim restorer bonds to the plastic surface at a molecular level, restoring the original color while providing long-lasting protection.Unlike typical trim dressing or black plastic restorer products that leave behind a greasy residue, C4 provides a natural finish with no oily buildup. It works across a wide range of exterior plastics, including rear bumper trim, front bumper accents, door handles, fender flares, license plate surrounds, and textured rubber surfaces.Features: Up to 2 years of durability Restores trim to ‘as new’ condition For use on all exterior trim Simple Steps To Help You Get The Best Results: Make sure you have enough product for all of your trim; an SUV (30ml) requires more than a small sedan (15ml) Work in a well-ventilated area at a temperature above 5°C (41°F) on a cool surface out of direct sunlight; wear the gloves provided Ensure the plastic surface is free from contaminants; for best results, clean trim with a neat solution of W5 Citrus All Purpose Cleaner and a medium-stiff brush to remove old dressings Use the AP1 Lint-free Applicator supplied to spread the coating onto each trim piece; soak the applicator pad with a small amount of product Once you have spread the product over each piece of trim, gently wipe away residue immediately with an MF1 ZeroR Microfibre Buff Cloth If your car has heavily textured trim, take time to ensure all crevices are covered and that all residue is removed Allow the coating to cure for 12 hours before exposing to the elements For enhanced durability, apply a second coat after the first has cured Use within 3 months of opening Store in a cool, dry place Normalized SKU: C4003UPC Code: 5060147721423

Gtechniq C5 0.015 Restoration & ProtectantsC5 Wheel Armour - 15mlC5 Wheel Armour is the ultimate choice for wheel care, providing exceptional protection for your investment. This professional-grade coating repels brake dust, dirt, and road contaminants, keeping your wheels effortlessly clean and pristine. It’s perfect for enhancing and protecting your wheels, brake calipers, and exhaust tips with a durable, long-lasting high-gloss finish.What makes C5 stand out is its advanced chemical bonding technology, which creates a durable layer that adheres seamlessly to your wheel surface. Its innovative formula resists stains and harsh environmental elements, ensuring a clean, polished look that lasts. Withstanding temperatures up to 600°C (1112°F), C5 is built to endure even the most demanding conditions your vehicle encounters.Coverage Guidelines: 15ml: Covers the outer rim faces of wheels up to 17 inches. 30ml: Ideal for inside and out coverage of wheels up to 20 inches. Features: Up to 2 years of durability Makes rims easy to maintain Suitable for wheels, brake calipers, and exhaust tips Simple Steps To Help You Get The Best Results: Make sure your wheels are clean and dry before application Wipe down each wheel before application with Gtechniq Panel Wipe – this will ensure the best possible bond. Please be careful with smart repairs on your wheels, as this may strip the paintwork on them Shake well before use and wear gloves Soak the AP1 Lint Free Applicator pad provided with several drops of product, and spread the coating onto the surface of your rim – no more than ½ a wheel each time Once you have spread the coating, buff residue within 30-60 seconds with an MF1 ZeroR Microfibre Buff Cloth Repeat the process on all of your wheels Allow the coating to cure indoors for 12 hours before exposing to the elements Suitable for gloss, satin and matte rim finishes Fit for use on chrome, but not polished metals Store in a cool, dry place Use within 3 months of opening Normalized SKU: C50015UPC Code: 5060147721515

Gtechniq C5 0.03 Restoration & ProtectantsC5 Wheel Armour - 30mlC5 Wheel Armour is the ultimate choice for wheel care, providing exceptional protection for your investment. This professional-grade coating repels brake dust, dirt, and road contaminants, keeping your wheels effortlessly clean and pristine. It’s perfect for enhancing and protecting your wheels, brake calipers, and exhaust tips with a durable, long-lasting high-gloss finish.What makes C5 stand out is its advanced chemical bonding technology, which creates a durable layer that adheres seamlessly to your wheel surface. Its innovative formula resists stains and harsh environmental elements, ensuring a clean, polished look that lasts. Withstanding temperatures up to 600°C (1112°F), C5 is built to endure even the most demanding conditions your vehicle encounters.Coverage Guidelines: 15ml: Covers the outer rim faces of wheels up to 17 inches. 30ml: Ideal for inside and out coverage of wheels up to 20 inches. Features: Up to 2 years of durability Makes rims easy to maintain Suitable for wheels, brake calipers, and exhaust tips Simple Steps To Help You Get The Best Results: Make sure your wheels are clean and dry before application Wipe down each wheel before application with Gtechniq Panel Wipe – this will ensure the best possible bond. Please be careful with smart repairs on your wheels, as this may strip the paintwork on them Shake well before use and wear gloves Soak the AP1 Lint Free Applicator pad provided with several drops of product, and spread the coating onto the surface of your rim – no more than ½ a wheel each time Once you have spread the coating, buff residue within 30-60 seconds with an MF1 ZeroR Microfibre Buff Cloth Repeat the process on all of your wheels Allow the coating to cure indoors for 12 hours before exposing to the elements Suitable for gloss, satin and matte rim finishes Fit for use on chrome, but not polished metals Store in a cool, dry place Use within 3 months of opening Normalized SKU: C5003UPC Code: 5060147721522

Gtechniq W3 0.5 Waxes & CleanersCeramic GWash - 500mlCeramic GWash is a super-concentrated car wash soap that delivers exceptional cleaning power while leaving behind a durable, hydrophobic layer. Our ceramic wash lifts and captures dirt particles from your car’s paint, minimizing the risk of swirl marks during the wash process while adding ceramic protection with every use.The advanced low-suds, high-lubrication formula safely removes dirt, bird droppings, and road grime from exterior surfaces without stripping existing protection. Ceramic GWash creates a water-beading effect that keeps your vehicle looking cleaner between washes. Formulated for automotive clear coats, this ceramic wash soap lifts contaminants with minimal effort and rinses clean without leaving residue behind.Features: Extreme Dirt Repellency Up to 3 months protection Safe for matte and satin finishes Simple Steps To Help You Get The Best Results: Shake well before use Use out of direct sunlight and on a cold surface Add 20ml per 10L into an empty bucket and fill with cold water Use with a wash mitt and the two-bucket method for best results Always begin washing the upper surfaces of your car and work downwards After use, rinse your car thoroughly with cold, clean water to remove all surfactants Dry using a microfiber towel Store in a cool, dry place Use within 12 months of opening Normalized SKU: W305UPC Code: 5060147722925

Gtechniq CSL 0.03 Restoration & ProtectantsCrystal Serum Light - 30mlGtechniq Crystal Serum Light delivers premium ceramic coating protection for vehicle owners who demand a high-gloss finish and lasting defense against environmental contaminants. This advanced silicon dioxide–based formula bonds at a molecular level with your paint’s clear coat to create a durable, chemical-resistant layer that shields against swirl marks, bird droppings, UV rays, and water spots. Offering up to five years of protection when properly maintained, Crystal Serum Light provides superior gloss, depth, and resistance to dirt, tree sap, and wash chemicals. Designed for low-maintenance upkeep, it’s the ideal choice for anyone seeking long-term paint protection and a professional-grade finish. Compared to traditional waxes or sealants, Crystal Serum Light offers stronger chemical resistance, easier cleaning, and longer-lasting protection. Its unique ceramic coating formula enhances gloss over time while simplifying maintenance, keeping your vehicle looking freshly detailed for years.Features: Swirl and chemical resistance Incredible gloss Up to five years of durability Simple steps to help you get the best results:Using a new product on your vehicle may cause some hesitation, and our team understands that. However, at Gtechniq, we make the application process simple and effective. To get the best results from Crystal Serum Light, follow these steps: To apply Crystal Serum Light (CSL), make sure your vehicle is indoors and can stay indoors for 12 hours after application. Do not apply in direct sunlight. Only apply the product at a temperature between 5°C and 25°C. Shake well and wear gloves. Wash and decontaminate your paintwork thoroughly before application. If required, polish your paintwork, either by machine or hand, to remove any imperfections. We recommend starting with a ceramic coat to prevent interference from debris throughout the process Spray Panel Wipe into a Gtechniq MF1 Microfibre Cloth and wipe down each panel in small sections. Soak the application pad with 3 full measures of CSL from the pipette and work the liquid into the pad to get an even saturation. Replace the lid on the bottle and set aside – do not keep the bottle in your hand as this promotes premature curing. Apply in overlapping strokes to an area roughly 2ft by 2ft, or work to the body lines of the vehicle. Immediately remove residue with an MF1 cloth – you may need to buff the same area several times, but avoid doing it with too much force. We recommend the use of 2 cloths at any one time. Make sure the cloths are rotated during residue removal to prevent CSL curing in the cloth – this can make buffing residue difficult. Inspect the surface for residue with a bright, diffused light source. If you remove residue and it cures fully, you should polish the area and reapply CSL. As soon as you finish, put your MF1 cloths in water, wash, and dry them as soon as possible. Wait approximately 2 hours after applying CSL before applying EXO Ultra Durable Hydrophobic Coating or C2 Liquid Crystal. Store in a cool, dry place. Use within 3 months of opening. Normalized SKU: CSL003UPC Code: 5060147721072

Gtechniq AC KIT L Restoration & ProtectantsEssential Maintenance KitThe Gtechniq Essential Maintenance Kit is the ultimate car detailing kit, designed for car enthusiasts who want high-quality care for their vehicles. Buying this kit saves you 15% compared to buying each item individually. The Essential Maintenance kit has all the essential tools and products to maintain that showroom shine, ensuring your car looks as good as the day you bought it. Each item is crafted with Gtechniq’s surface science, offering unparalleled performance and protection.Whether you’re a professional car detailer or a passionate car owner, this kit is your go-to solution to up your detailing game and keep your vehicle in pristine condition. Each product in the kit is designed to tackle specific tasks, from removing stubborn dirt to protecting various surfaces, making your detailing process efficient and enjoyable. With Gtechniq’s Essential Maintenance Kit, you’re not just maintaining your car—you’re enhancing its value with science-backed cleaning products that outshine the competition.Features:All the must-have items needed to maintain your car. Great for storing in the boot or in a garageWhat's Inside? GWash (500ml): A high-foaming car wash that lifts road grime and stubborn dirt effortlessly. Perfect for use with a wash mitt and the two-bucket method. Quick Detailer (500ml): This versatile spray bottle product provides a quick and easy way to remove light dirt and water spots, giving your car a shining finish in seconds. G6 Perfect Glass (500ml): Engineered with nanochemistry, this glass cleaner guarantees streak-free clarity on your windshield, windows, and mirrors. W6 Iron Removing Wheel & Paint Cleaner (250ml): A powerful formula that targets and dissolves brake dust and iron contaminants, protecting your car’s paint and wheels from damage. T2 Tyre Dressing (250ml): For a deep, long-lasting tire shine that resists UV rays and road grime, keeping your tires looking like new. W8v2 Bug Remover (250ml): This specialized cleaner tackles bug splatter and other organic residues without damaging your paint or leaving streaks. MF1 ZeroR Microfibre Buff Cloth (x2): High-quality microfiber towels designed for effective cleaning and polishing, ensuring no scratches or swirls. MF2 Zero Scratch Microfibre Drying Towel: Super absorbent and soft, this towel is essential for drying your car after a wash, leaving a streak-free finish. WM2 Wash Mitt Gtechniq Keychain Gtechniq Wash Guide Gtechniq Branded Kit Bag: A durable, spacious bag to keep all your detailing tools organized and ready for use. Normalized SKU: ACKITL

Gtechniq EWK Restoration & ProtectantsEssential Wash KitA proper car wash starts with the right tools. This wash kit bundles everything you need to clean your vehicle safely, without risking swirl marks or scratching your paint.GWash and our Citrus All Purpose Cleaner cut through dirt, grime, and brake dust with ease while staying gentle on ceramic coatings, paint, and waxes. The included microfiber wash mitt glides across surfaces, lifting contaminants instead of grinding them in. To top it off, our MF4 drying towel absorbs water quickly during the drying process, leaving behind a spotless finish. It’s a complete car washing setup that makes maintenance washes easier and safer.Kit Contains: 250ml GWash 500ml Citrus All Purpose Cleaner 1 x WM2 Microfibre Wash Mitt 1 x MF4 Diamond Sandwich Drying Towel Simple Steps To Get The Best Results: How do I Use The GWash in my Car Wash Kit? Shake well before use Use this car shampoo out of direct sunlight Add two caps (20ml) for light dirt, or four caps (40ml) for heavy dirt, into an empty 5-gallon (23 liter) wash bucket Fill the bucket with water (for best results, use warm water) Always begin washing the upper surfaces of your car and work downwards into the harder-to-reach areas After using our car wash soap, rinse your vehicle thoroughly with clean water to remove all surfactants Store your leftover GWash in a cool, dry place Use within 12 months of opening How Do I Use The Citrus All Purpose Cleaner in my Car Wash Kit? Shake well before use and wear gloves Use neat for heavy soiling, 5:1 for general cleaning tasks, and up to 10 parts water to one part product for light soiling Spray directly onto the surface and leave to dwell for 3-5 minutes Rinse residue with water and repeat if necessary. In extreme cases, agitate the surface with an MF1 ZeroR Microfibre Buff Cloth or soft, short-bristled brush Store in a cool, dry place Use within 12 months of opening Normalized SKU: EWKUPC Code: 5060147723403

Gtechniq EXOCSL 0.03 Restoration & ProtectantsEXO & Crystal Serum Light - 30mlCrystal Serum Light is an outstanding standalone ceramic coating for gloss retention and exceptional scratch resistance, protecting your car’s paint from swirl marks and environmental damage. For car enthusiasts who want the best ceramic coat protection available, combining these two products is the answer.This kit combines Crystal Serum Light’s protection and chemical resistance with EXOv5’s extreme hydrophobic properties, giving your vehicle a high-gloss finish that repels water, bird droppings, and contaminants. It’s ideal for daily drivers and show cars alike. Whether you’re shielding factory paint on a new vehicle or restoring your previous car after paint correction, this combination creates a durable sacrificial layer that makes maintenance washes effortless while preserving your clear coat for years.Crystal Serum Light Chemical resistance from a prosumer-grade product Incredible gloss Up to 5 years durability EXOv5 Ultra Durable Coating Improved durability Same great gloss, water and dirt repellency Significantly easier to apply Simple steps to help you get the best results:Using a new product on your vehicle may cause some hesitation, and our team understands that. However, at Gtechniq, we make the application process simple and effective. To get the best results from Crystal Serum Light, follow these steps: To apply Crystal Serum Light (CSL), make sure your vehicle is indoors and can stay indoors for 12 hours after application. Do not apply in direct sunlight. Only apply the product at a temperature between 5°C and 25°C. Shake well and wear gloves. Wash and decontaminate your paintwork thoroughly before application. If required, polish your paintwork, either by machine or hand, to remove any imperfections. Spray Panel Wipe into a Gtechniq MF1 Microfibre Cloth and wipe down each panel in small sections. Soak the application pad with 3 full measures of CSL from the pipette and work the liquid into the pad to get an even saturation. Replace the lid on the bottle and set aside – do not keep the bottle in your hand as this promotes premature curing. Apply in overlapping strokes to an area roughly 2ft by 2ft, or work to the body lines of the vehicle. Immediately remove residue with an MF1 cloth – you may need to buff the same area several times, but avoid doing it with too much force. We recommend the use of 2 cloths at any one time. Make sure the cloths are rotated during residue removal to prevent CSL curing in the cloth – this can make buffing residue difficult. Inspect the surface for residue with a bright, diffused light source. If you remove residue and it cures fully, you should polish the area and reapply CSL. As soon as you finish, put your MF1 cloths in water, wash, and dry them as soon as possible. Wait approximately 2 hours after applying CSL before applying EXO Ultra Durable Hydrophobic Coating or C2 Liquid Crystal. Store in a cool, dry place. Use within 3 months of opening. Normalized SKU: EXOCSL003UPC Code: 5060147721348