00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 10' Ezy-Stick II Stick Steering #840-1000
$463.64
$578.68
Ezy-Glide 840-1000 Stick SteeringMechanical steering system designed so operator may be positioned in the front of boat. Slower ratio which provides the added mechanical advantage needed for higher horsepower as well as 4-stroke engines. Horsepower rating: 70 hp OB-90 hp Jet. Total lever movement: 58''/206. Ratio:6.4/1.Ezy-Glide 10 Ft Stick Steering #840-1000Normalized SKU: 8401000UPC Code: 096369841002
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 10' Replacement Cable #RC-1000
$240.71
$305.72
Ezy-Glide RC-1000 Stick Steering
The Ezy-Glide RC-1000 is a 10-foot replacement steering cable for Model 650, Model 830, Model 840, and Model 870 systems. It is part of the Ezy-Stik Cable series.
To check the required cable length, measure from the center of the helm position to the center of the engine along the path the cable will follow, then add 8 inches. Use the measuring guide below when confirming your replacement cable selection.
Manufacturer: Ezy-Glide
Part number: RC-1000
Cable length: 10 feet
Fits Model 650, Model 830, Model 840, and Model 870
Series: Ezy-Stik Cable
Measuring allowance: Add 8 inches to the helm-to-engine cable-path measurement
SKU: EZG-RC-1000
How to measure an Ezy-Glide Replacement Cable
Normalized SKU: RC1000
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 11' Ezy-Stick II Stick Steering #840-1100
$433.19
$540.68
Ezy-Glide 840-1100 Mechanical Steering
The Ezy-Glide 840-1100 is an 11-foot Ezy-Stick II mechanical steering system designed to position the operator at the front of the boat for visibility and convenience. Maximum ratings are 70 HP for outboard engines and 90 HP for jet drives.
The slower 6.4:1 steering ratio provides added mechanical advantage for higher-horsepower and 4-stroke engine applications within those ratings. For 4-stroke engines over 40 HP, consider the Ezy-Stick II Model 840 rather than Model 870.
A one-piece stainless steel drive spool is enclosed in a high-impact molded housing. The "CORLOK" design locks to the drum, and the interlocking handle-to-steering-shaft connection helps prevent the handle from slipping out of position. Stainless steel mounting hardware is supplied with the system.
Manufacturer part number: 840-1100
Series: Ezy-Stick II, Model 840
Length: 11 feet
Maximum rating: 70 HP outboard / 90 HP jet drive
Total handle travel: 58 inches / 206°
Steering ratio: 6.4:1
Housing dimensions: Approximately 6 x 6 inches
Lever length: 16 inches
One-piece stainless steel drive spool and high-impact molded housing
Stainless steel mounting hardware included
SKU: EZG-840-1100
Normalized SKU: 8401100UPC Code: 096369841101
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 11' Ezy-Stick III Stick Steering #870-1100
$463.64
$578.68
Ezy-Glide 870-1100 Stick Steering
The Ezy-Glide 870-1100 Ezy-Stick III is an 11-foot mechanical stick steering system designed to allow the operator to be positioned at the front of the boat. The manufacturer's recommended maximum ratings are 70 HP for outboard engines and 90 HP for jet drives.
The Model 870 is designed for quicker response and shorter lock-to-lock handle travel. Its helm features a one-piece stainless steel drive spool and reinforced composite housing. The self-lubricating helm requires no additional lubricants within the helm.
The "CorLock" design locks the cable to the drum, while the interlocking lever-to-steering-shaft connection helps prevent the lever from slipping out of position.
Manufacturer part number: 870-1100
Series: Ezy-Stick III, Model 870
Length: 11 feet
Maximum recommended rating: 70 HP outboard / 90 HP jet drive
Total handle travel: 44.8 inches / 161°
Steering ratio: 5.0:1
Housing dimensions: Approximately 7-1/2 x 7-1/2 inches
Lever length: 16 inches
One-piece stainless steel drive spool and reinforced composite housing
1-year factory warranty
SKU: EZG-870-1100
Normalized SKU: 8701100
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 11' Replacement Cable #RC-1100
$240.71
$305.72
Ezy-Glide RC-1100 Stick Steering
The Ezy-Glide RC-1100 is an 11-foot replacement cable for Ezy-Glide Model 650, Model 830, Model 840, and Model 870 stick steering systems. It has a specified reach of 124 inches.
To determine the required cable length, measure from the center of the helm position to the center of the engine along the intended cable route, then add 8 inches. Confirm the steering system model and required cable length before selecting a replacement.
Manufacturer: Ezy-Glide
Part number: RC-1100
Application: Replacement stick steering cable
Fits: Model 650, Model 830, Model 840, and Model 870
Cable length: 11 feet
Reach: 124 inches
Sizing method: Measure the helm-to-engine cable route and add 8 inches
How to measure an Ezy-Glide Replacement Cable
Normalized SKU: RC1100
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 12' Ezy-Stick II Stick Steering #840-1200
$433.19
$540.68
Ezy-Glide 840-1200 Mechanical Steering
The Ezy-Glide 840-1200 is a 12-foot Ezy-Stick II mechanical steering system designed to position the operator at the front of the boat for visibility and convenience. Maximum ratings are 70 HP for outboard engines and 90 HP for jet drives.
The slower 6.4:1 steering ratio provides added mechanical advantage for higher-horsepower and 4-stroke engine applications within those ratings. For 4-stroke engines over 40 HP, consider the Ezy-Stick II Model 840 rather than Model 870.
A one-piece stainless steel drive spool is enclosed in a high-impact molded housing. The "CORLOK" design locks to the drum, and the interlocking handle-to-steering-shaft connection helps prevent the handle from slipping out of position. Stainless steel mounting hardware is supplied with the system.
Manufacturer part number: 840-1200
Series: Ezy-Stick II, Model 840
Length: 12 feet
Maximum rating: 70 HP outboard / 90 HP jet drive
Total handle travel: 58 inches / 206°
Steering ratio: 6.4:1
Housing dimensions: Approximately 6 x 6 inches
Lever length: 16 inches
One-piece stainless steel drive spool and high-impact molded housing
Stainless steel mounting hardware included
SKU: EZG-840-1200
Normalized SKU: 8401200UPC Code: 096369841200
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 12' Ezy-Stick III Stick Steering #870-1200
$463.64
$578.68
Ezy-Glide 870-1200 Stick Steering
The Ezy-Glide 870-1200 Ezy-Stick III is a 12-foot mechanical stick steering system designed to allow the operator to be positioned at the front of the boat. The manufacturer's recommended maximum ratings are 70 HP for outboard engines and 90 HP for jet drives.
The Model 870 is designed for quicker response and shorter lock-to-lock handle travel. Its helm features a one-piece stainless steel drive spool and reinforced composite housing. The self-lubricating helm requires no additional lubricants within the helm.
The "CorLock" design locks the cable to the drum, while the interlocking lever-to-steering-shaft connection helps prevent the lever from slipping out of position.
Manufacturer part number: 870-1200
Series: Ezy-Stick III, Model 870
Length: 12 feet
Maximum recommended rating: 70 HP outboard / 90 HP jet drive
Total handle travel: 44.8 inches / 161°
Steering ratio: 5.0:1
Housing dimensions: Approximately 7-1/2 x 7-1/2 inches
Lever length: 16 inches
One-piece stainless steel drive spool and reinforced composite housing
1-year factory warranty
SKU: EZG-870-1200
Normalized SKU: 8701200
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 12' Replacement Cable #RC-1200
$239.85
$304.62
Ezy-Glide RC-1200 Control Cables
The Ezy-Glide RC-1200 is a 12-foot replacement cable for Ezy-Glide Stik Steering systems. It is part of the Ezy-Stik Cable series and is listed for use with all Ezy-Glide Stik Steering systems.
Confirm the required cable length before ordering a replacement. Use the cable-measuring guide below to check your setup against the 12-foot specification.
Manufacturer: Ezy-Glide
Part number: RC-1200
Cable length: 12 feet
Application: All Ezy-Glide Stik Steering systems
Series: Ezy-Stik Cable
SKU: EZG-RC-1200
How to measure an Ezy-Glide Replacement Cable
Normalized SKU: RC1200UPC Code: 096369181207
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 13' Ezy-Stick II Stick Steering #840-1300
$433.19
$540.68
Ezy-Glide 840-1300 Mechanical Steering
The Ezy-Glide 840-1300 is a 13-foot Ezy-Stick II mechanical steering system designed to position the operator at the front of the boat for visibility and convenience. Maximum ratings are 70 HP for outboard engines and 90 HP for jet drives.
The slower 6.4:1 steering ratio provides added mechanical advantage for higher-horsepower and 4-stroke engine applications within those ratings. For 4-stroke engines over 40 HP, consider the Ezy-Stick II Model 840 rather than Model 870.
A one-piece stainless steel drive spool is enclosed in a high-impact molded housing. The "CORLOK" design locks to the drum, and the interlocking handle-to-steering-shaft connection helps prevent the handle from slipping out of position. Stainless steel mounting hardware is supplied with the system.
Manufacturer part number: 840-1300
Series: Ezy-Stick II, Model 840
Length: 13 feet
Maximum rating: 70 HP outboard / 90 HP jet drive
Total handle travel: 58 inches / 206°
Steering ratio: 6.4:1
Housing dimensions: Approximately 6 x 6 inches
Lever length: 16 inches
One-piece stainless steel drive spool and high-impact molded housing
Stainless steel mounting hardware included
SKU: EZG-840-1300
Normalized SKU: 8401300UPC Code: 096369841309
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 13' Ezy-Stick III Stick Steering #870-1300
$463.64
$578.68
Ezy-Glide 870-1300 Stick Steering
The Ezy-Glide 870-1300 Ezy-Stick III is a 13-foot mechanical stick steering system designed to allow the operator to be positioned at the front of the boat. The manufacturer's recommended maximum ratings are 70 HP for outboard engines and 90 HP for jet drives.
The Model 870 is designed for quicker response and shorter lock-to-lock handle travel. Its helm features a one-piece stainless steel drive spool and reinforced composite housing. The self-lubricating helm requires no additional lubricants within the helm.
The "CorLock" design locks the cable to the drum, while the interlocking lever-to-steering-shaft connection helps prevent the lever from slipping out of position.
Manufacturer part number: 870-1300
Series: Ezy-Stick III, Model 870
Length: 13 feet
Maximum recommended rating: 70 HP outboard / 90 HP jet drive
Total handle travel: 44.8 inches / 161°
Steering ratio: 5.0:1
Housing dimensions: Approximately 7-1/2 x 7-1/2 inches
Lever length: 16 inches
One-piece stainless steel drive spool and reinforced composite housing
1-year factory warranty
SKU: EZG-870-1300
Normalized SKU: 8701300UPC Code: 096369871306
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 13' Replacement Cable #RC-1300
$240.71
$305.72
Ezy-Glide RC-1300 Control Cables
The Ezy-Glide RC-1300 is a 13-foot replacement cable for Ezy-Glide Stik Steering systems. It is part of the Ezy-Stik Cable series and is listed for use with all Ezy-Glide Stik Steering systems.
Confirm the required cable length before ordering a replacement. Use the cable-measuring guide below to check your setup against the 13-foot specification.
Manufacturer: Ezy-Glide
Part number: RC-1300
Cable length: 13 feet
Application: All Ezy-Glide Stik Steering systems
Series: Ezy-Stik Cable
SKU: EZG-RC-1300
How to measure an Ezy-Glide Replacement Cable
Normalized SKU: RC1300UPC Code: 096369181306
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 14' Ezy-Stick II Stick Steering #840-1400
$463.64
$578.68
Ezy-Glide 840-1400 Mechanical Steering
The Ezy-Glide 840-1400 is a 14-foot Ezy-Stick II mechanical steering system designed to position the operator at the front of the boat for visibility and convenience. Maximum ratings are 70 HP for outboard engines and 90 HP for jet drives.
The slower 6.4:1 steering ratio provides added mechanical advantage for higher-horsepower and 4-stroke engine applications within those ratings. For 4-stroke engines over 40 HP, the existing product guidance recommends considering Model 840 over Model 870.
A one-piece stainless steel drive spool is enclosed in a high-impact molded housing. The "CORLOK" design locks to the drum, and the interlocking handle-to-steering-shaft connection helps prevent the handle from slipping out of position. Stainless steel mounting hardware is supplied with the system.
Manufacturer part number: 840-1400
Series: Ezy-Stick II, Model 840
Length: 14 feet
Maximum rating: 70 HP outboard / 90 HP jet drive
Total handle travel: 58 inches / 206°
Steering ratio: 6.4:1
Housing dimensions: Approximately 6 x 6 inches
Lever length: 16 inches
One-piece stainless steel drive spool and high-impact molded housing
Stainless steel mounting hardware included
SKU: EZG-840-1400
Normalized SKU: 8401400UPC Code: 096369841408
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 14' Ezy-Stick III Stick Steering #870-1400
$463.64
$578.68
Ezy-Glide 870-1400 Mechanical Steering
Model 870 is a mechanical steering system designed so the operator may be positioned in front of the boat. This system carries the manufacturer's recommended maximum 70 HP for outboard engines & 90 HP maximum for jet drives - Stainless steel rotating drum. A self-lubricating system needs no additional lubricants within the helm. "CorLock" design locks cable to drum for added safety. Interlocking lever to steering shaft relieves the possibility of lever slipping from its position.
Total lever movement: 44.8” and 161-Degrees
Steering ratio: 5.0/1
Housing dimensions: approximately 7-1/2” x 7-1/2”
1-year factory warranty
Normalized SKU: 8701400
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 14' Replacement Cable #RC-1400
$239.85
$304.62
Ezy-Glide RC-1400 Control Cables
The Ezy-Glide RC-1400 is a 14-foot replacement cable for Ezy-Glide Stik Steering systems. It is part of the Ezy-Stik Cable series and is listed for use with all Ezy-Glide Stik Steering systems.
Confirm the required cable length before ordering a replacement. Use the cable-measuring guide below to check your setup against the 14-foot specification.
Manufacturer: Ezy-Glide
Part number: RC-1400
Cable length: 14 feet
Application: All Ezy-Glide Stik Steering systems
Series: Ezy-Stik Cable
SKU: EZG-RC-1400
How to measure an Ezy-Glide Replacement Cable
Normalized SKU: RC1400UPC Code: 096369181405
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 15' Ezy-Stick II Stick Steering #840-1500
$463.64
$578.68
Ezy-Glide 840-1500 Stick Steering
The Ezy-Glide 840-1500 is a 15-foot Ezy-Stick II mechanical stick steering system designed to position the operator at the front of the boat for visibility and convenience. Maximum ratings are 70 HP for outboard engines and 90 HP for jet drives.
The slower 6.4:1 steering ratio provides added mechanical advantage for higher-horsepower and 4-stroke engine applications within those ratings. A one-piece stainless steel drive spool and high-impact housing form the single-lever steering platform.
Manufacturer part number: 840-1500
Series: Ezy-Stick II
Length: 15 feet
Maximum rating: 70 HP outboard / 90 HP jet drive
Total handle travel: 58 inches / 206°
Steering ratio: 6.4:1
Housing dimensions: Approximately 6 x 6 inches
Lever length: 16 inches
One-piece stainless steel drive spool and high-impact housing
SKU: EZG-840-1500
Normalized SKU: 8401500UPC Code: 096369841507
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 15' Ezy-Stick III Stick Steering #870-1500
$463.64
$578.68
Ezy-Glide 870-1500 Stick Steering
The Ezy-Glide 870-1500 Ezy-Stick III is a 15-foot mechanical stick steering system designed to allow the operator to be positioned at the front of the boat. The manufacturer's recommended maximum ratings are 70 HP for outboard engines and 90 HP for jet drives.
The Model 870 is designed for quicker response and shorter lock-to-lock handle travel. Its one-piece stainless steel drive spool and reinforced composite housing provide the helm construction, while the self-lubricating helm requires no additional lubricants within the helm.
The "CorLock" design locks the cable to the drum, and the interlocking lever-to-steering-shaft connection helps prevent the lever from slipping out of position.
Manufacturer part number: 870-1500
Series: Ezy-Stick III, Model 870
Length: 15 feet
Maximum recommended rating: 70 HP outboard / 90 HP jet drive
Total handle travel: 44.8 inches / 161°
Steering ratio: 5.0:1
Housing dimensions: Approximately 7-1/2 x 7-1/2 inches
Lever length: 16 inches
One-piece stainless steel drive spool and reinforced composite housing
1-year factory warranty
SKU: EZG-870-1500
Normalized SKU: 8701500
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 15' Replacement Cable #RC-1500
$240.71
$305.72
Ezy-Glide RC-1500 Stick Steering
The Ezy-Glide RC-1500 is a 15-foot replacement cable for Ezy-Glide Model 650, Model 830, Model 840, and Model 870 stick steering systems. It has a specified reach of 172 inches.
To determine the required cable length, measure from the center of the helm position to the center of the engine along the intended cable route, then add 8 inches. Check both the steering system model and the required cable length before selecting a replacement.
Manufacturer: Ezy-Glide
Part number: RC-1500
Application: Replacement stick steering cable
Fits: Model 650, Model 830, Model 840, and Model 870
Cable length: 15 feet
Reach: 172 inches
Sizing method: Measure the helm-to-engine cable route and add 8 inches
How to measure an Ezy-Glide Replacement Cable
Normalized SKU: RC1500
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 17' Ezy-Stick II Stick Steering #840-1700
$467.40
$583.37
Ezy-Glide 840-1700 Mechanical Steering
The Ezy-Glide 840-1700 Stik Steering cable has a 17-foot cable length and a 196-inch reach. It is listed in the Ezy-Stick II series for mechanical steering applications.
Check both cable length and reach against your existing steering setup when selecting this part. The 17-foot cable length and 196-inch reach are separate specifications to use when confirming fitment.
Manufacturer: Ezy-Glide
Part number: 840-1700
Series: Ezy-Stick II
Application: Stik Steering mechanical steering
Cable length: 17 feet
Reach: 196 inches
SKU: EZG-840-1700
Normalized SKU: 8401700UPC Code: 096369841507
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 8' Ezy-Stick II Stick Steering #840-0800
$463.64
$578.68
Ezy-Glide 840-0800 Stick Steering
The Ezy-Glide 840-0800 is an 8-foot Ezy-Stick II mechanical stick steering system designed to position the operator at the front of the boat for visibility and convenience. Maximum ratings are 70 HP for outboard engines and 90 HP for jet drives.
The slower 6.4:1 steering ratio provides added mechanical advantage for higher-horsepower and 4-stroke engine applications within those ratings. A one-piece stainless steel drive spool and high-impact housing form the single-lever steering platform.
Manufacturer part number: 840-0800
Series: Ezy-Stick II
Length: 8 feet
Maximum rating: 70 HP outboard / 90 HP jet drive
Total handle travel: 58 inches / 206°
Steering ratio: 6.4:1
Housing dimensions: Approximately 6 x 6 inches
Lever length: 16 inches
One-piece stainless steel drive spool and high-impact housing
SKU: EZG-840-0800
Normalized SKU: 8400800UPC Code: 096369840807
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ezy-Glide
Ezy-Glide 9' Ezy-Stick II Stick Steering #840-0900
$463.64
$578.68
Ezy-Glide 840-0900 Stick Steering
The Ezy-Glide 840-0900 is a 9-foot Ezy-Stick II mechanical stick steering system designed to position the operator at the front of the boat for visibility and convenience. Maximum ratings are 70 HP for outboard engines and 90 HP for jet drives.
The slower 6.4:1 steering ratio provides added mechanical advantage for higher-horsepower and 4-stroke engine applications within those ratings. A one-piece stainless steel drive spool and high-impact housing form the single-lever steering platform.
Manufacturer part number: 840-0900
Series: Ezy-Stick II
Length: 9 feet
Maximum rating: 70 HP outboard / 90 HP jet drive
Total handle travel: 58 inches / 206°
Steering ratio: 6.4:1
Housing dimensions: Approximately 6 x 6 inches
Lever length: 16 inches
One-piece stainless steel drive spool and high-impact housing
SKU: EZG-840-0900
Normalized SKU: 8400900
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.