CorrosionX 25224 Waxes & CleanersCorrosionX Aluma-Brite HD Aluminum Cleaner & Brightener Gallon #25224Normalized SKU: 25224UPC Code: 761866252247

CorrosionX 49004 Waxes & Cleaners BARNACLEX is the only biofouling dissolver / remover whose chemistry targets the complete range of issues associated with both fouling organisms and the dissolved minerals contained in fresh, brackish and seawater. BARNACLE-X not only dissolves calcium- and silicone dioxide-based shells and exoskeletons, it also breaks down mineral accumulations and the bio-adhesives secreted by barnacles, mussels and limpets, so that those organisms can be more quickly and easily removed from vessel hulls and running gear.  For use on both freshwater and saltwater systems and hulls Dissolves the calcium and silicone dioxide shells and exoskeletons of macrofouling organisms such as barnacles, mussels, limpets and coral, as well as microfouling organisms such as bacteria and algae that accumulate on heat exchanger surfaces. Contains the natural release agent for the bio-adhesives secreted by barnacles and mussels. Reduces corrosion caused by restricted flow, the anodic condition created by decreased oxygen below the fouling layer, and the metabolic by-products of bacteria. Safe on bronze, copper, gelcoat and marine paints when used as directed Normalized SKU: 49004UPC Code: 761866490045

CorrosionX 94004 Corrosion InhibitorsCorrosionX Corrosion Inhibitor Penetrant Lubricant Gallon #94004Normalized SKU: 94004UPC Code: 761866940045

CorrosionX 96004 Corrosion InhibitorsCorrosionX Corrosion Inhibitor Penetrant Lubricant HD Gallon #96004Normalized SKU: 96004

CorrosionX 90102 Corrosion Inhibitors Corrosion Technologies 90102 CorrosionX, 16 oz.Most advanced and effective corrosion prevention compound, lubricant, and penetrant. It utilizes revolutionary Polar Bonding™ and Fluid Thin Film Coating (FTFC™) technologies that together do far more than merely slow down the corrosion process like those so-called 'corrosion inhibitors'. It disrupts rust and corrosion on the molecular level (displacing it from the metal surface and keeping it from spreading) and provides long-term protection against rust and corrosion on any metal surface. The only product available to the public that meets the U.S. Navy's tough new corrosion prevention and control performance requirement is MIL-PRF-81309H. Due to Polar Bonding, Causes common metals and metal alloys such as iron, steel, stainless steel, aluminum, copper, brass, bronze, etc. to chemically behave more like noble metals such as gold and platinum, which are highly resistant to oxidation. Also has a dielectric characteristic, so not only is it safe on electronics, but also shuts down electrolysis between dissimilar metals. Use wherever you want corrosion control without paint or wax coatings. A light spray on power heads, gen-sets, and engines a couple of times a year will keep them looking like new © even in saltwater and coastal environments. Normalized SKU: 90102UPC Code: 761866901022

CorrosionX 90101 Corrosion Inhibitors CorrosionX, 6 oz. Most advanced and effective corrosion prevention compound, lubricant, and penetrant. It utilizes revolutionary Polar Bonding™ and Fluid Thin Film Coating (FTFC™) technologies that together do far more than merely slow down the corrosion process like those so-called 'corrosion inhibitors'. It disrupts rust and corrosion on the molecular level (displacing it from the metal surface and keeping it from spreading) and provides long-term protection against rust and corrosion on any metal surface. The only product available to the public that meets the U.S. Navy's tough new corrosion prevention and control performance requirement is MIL-PRF-81309H. Due to Polar Bonding, Causes common metals and metal alloys such as iron, steel, stainless steel, aluminum, copper, brass, bronze, etc. to chemically behave more like noble metals such as gold and platinum, which are highly resistant to oxidation.  Also has a dielectric characteristic, so not only is it safe on electronics, but also shuts down electrolysis between dissimilar metals. Use wherever you want corrosion control without paint or wax coatings. A light spray on power heads, gen-sets, and engines a couple of times a year will keep them looking like new © even in saltwater and coastal environments. Normalized SKU: 90101UPC Code: 761866901015

CorrosionX 90104 Corrosion Inhibitors Corrosion Technologies 90104 CorrosionX HD, 16 oz A High-performance thickened-film version of CorrosionX®. It was developed specifically to provide maximum protection against moisture intrusion and the resulting rust and corrosion. Dripless and resists displacement or removal by splash, rain, seawater, or even pressure washing. It is ideal for long-term protection against serious rust and corrosion assault and in situations where the surface being protected is exposed directly to the elements. Unlike wax-based corrosion inhibitor barrier coatings, this will not dry, harden or crack. The coating is self-healing and will slowly penetrate existing rust and corrosion, displacing moisture and corrosion-causing electrolytes. Normalized SKU: 90104UPC Code: 761866901046

CorrosionX 96801 Lubricants & Additives CorrosionX is now available in a high performance, multi-purpose, extreme pressure rated NLGI #2 grade premium grease. Suitable for the toughest marine environments, CorrosionX® Grease thrives where other products fail. We know of no finer product available on the market today. Engineered for maximum shear stability, film strength and heavy shock-load performance, CorrosionX Grease offers unsurpassed wear and extreme pressure protection. CorrosionX Grease is the product of choice for automotive and extreme pressure applications in marine, construction, mining, agricultural, logging, and hauling industries. Choose CorrosionX Grease for your most demanding applications. Features Polar Bonding technology inside Premium base oils provide proven oxidation resistance, and unsurpassed performance in marine and freshwater environments. Over-based calcium sultanate complex thickener maximizes pump-ability, water resistance, and high drop point. Superior anti-wear additives lubricate and prevent wear. Synergistic corrosion inhibitors protect against rust and corrosion. Advanced extreme pressure additive package handles high carrying and shock load. Normalized SKU: 96801UPC Code: 761866968018

CorrosionX 91002 Kills rust and corrosion World's greatest lubricant, penetrant & anti-seize Safe on electronics CorrosionX® is the most advanced and effective corrosion prevention compound, lubricant, and penetrant in the world! Although it may look similar to other oil-based anti-corrosion sprays, CorrosionX utilizes revolutionary Polar Bonding™ and Fluid Thin Film Coating (FTFC™) technologies that together do far more than merely slow down the corrosion process like those so-called 'corrosion inhibitors'. CorrosionX actually disrupts rust and corrosion on the molecular level (displacing it from the metal surface and keeping it from spreading), and provides long-term protection against rust and corrosion on any metal surface. CorrosionX is the only product readily available to the public that meets the U.S. Navy's tough new corrosion prevention and control performance requirement MIL-PRF-81309H. Due to Polar Bonding, CorrosionX causes common metals and metal alloys such as iron, steel, stainless steel, aluminum, copper, brass, bronze, etc. to chemically behave more like noble metals such as gold and platinum, which are highly resistant to oxidation. CorrosionX also has a dielectric characteristic, so not only is it safe on electronics, CorrosionX shuts down electrolysis between dissimilar metals. Use CorrosionX wherever you want corrosion control without paint or wax coatings. A light spray of CorrosionX on power heads, gensets and engines a couple of times a year will keeping them looking like new – even in saltwater and coastal environments. A Breakthrough Lubricant CorrosionX's unique formulation offers a multitude of advantages over conventional spray lubricants. Because it sticks to metal like a magnet, it cannot be easily displaced by pressure, friction or moisture. It lubricates under extreme loads and high temperatures. Not only does CorrosionX lubricate better, it lasts many times longer! This is especially true in outdoor, coastal and marine environments where direct exposure to rain and sea spray will quickly displace ordinary lubricants.Use CorrosionX on sheaves, hinges, locks, cable/wire rope, windlasses or any metal part needing lubrication. An Unbeatable Penetrant CorrosionX penetrates faster and further than any penetrating fluid you've ever used! Corroded or rusted nuts, bolts or fittings can usually be disassembled within minutes. Even items you believe to be hopelessly seized can usually be saved and returned to service. Safe On Electronics Water and electronics don't mix. Until now, there haven't been many options for protecting or restoring electronics from moisture intrusion. CorrosionX's unique Polar Bonding Fluid Thin Film Coating (FTFC) technology displaces moisture and seals it out with a self-healing high dielectric coating. Even though CorrosionX has a dielectric property in excess of 39,000 volts, because it forms an ultra-thin film it does not interfere with electronics or heat dissipation. A must for all marine battery terminals and a mission-critical product for drones and all Remote Control hobbyists. Minimal Environmental Impact Product The volatile organic content (usually abbreviated as VOC or VOCs) of CorrosionX is now ZERO. Compare that to most products in the spray lubricant category, which can be 50% or more VOC (for example, according to their current Safety Data Sheet, WD-40 is 49.5% solvent). That means CorrosionX is gentler on you, your equipment and the environment. Normalized SKU: 91002UPC Code: 761866910024

CorrosionX 77012 Lubricants & AdditivesCorrosionX ReelX & ReelX Grease 1 oz #77012Normalized SKU: 77012

CorrosionX 77960 Lubricants & Additives From Corrosion Technologies – the worldwide leader in marine corrosion prevention and lubrication. ReelX® Grease is the new, hi-tech, synthetic, extreme-pressure optimized reel grease developed for all spinning and casting reels. Used in conjunction with ReelX® fishing reel oil, ReelX Grease blocks moisture intrusion, reduces wear, disrupts existing corrosion, and prevents new corrosion or rust from forming. ReelX Grease combines our top-rated marine grease with an additive package containing the same revolutionary Polar Bonding technology found in CorrosionX® and additional extreme pressure additives to make your fishing reels achieve their ultimate performance. Bring your reel performance to a whole new level Improves reel performance Superior, marine-grade water stability Prevents moisture intrusion Stops/prevents rust and corrosion Will Not Harm Plastic, PTFE, or Monofilament Normalized SKU: 77960

CorrosionX 77000 Oil & Lubricants The best thing to happen to your fishing reel since you took it out of the box! ReelX® is a hi-tech, extreme-pressure optimized reel lubricant that virtually eliminates wear, disrupts existing corrosion, and prevents new corrosion or rust from forming. ReelX is the perfect choice for all spinning and casting reels. A breakthrough lubricant starting with the revolutionary CorrosionX core Polar Bonding technology, we added a package of extreme pressure additives specifically engineered to make your fishing reels achieve their ultimate performance. ReelX contains no wax, tar, silicone, or other solids, so it will never gum up. Like all CorrosionX products, ReelX sticks to metal like a magnet, so it cannot be easily displaced by pressure, friction, or moisture. It lubricates under extreme loads and high temperatures. And not only does ReelX lubricate better, because it is bound to metal on the molecular level, it lasts many times longer than conventional fishing reel lubricants! ReelX will outperform any other lubricant on a fishing reel – period. Improves reel performance Displaces moisture Stops/prevents rust and corrosion Will Not Harm Plastic, PTFE, or Monofilament The choice of the U.S. Longcasters Team (with ReelX, the longcasters are able to achieve casts that routinely exceed 260 yards as measured by laser, accurate to withing +/- 1/2"). Used by many of the world's top reel manufacturers, including: Accurate Fishing Products Bauer Premium Fly Reels, Inc Electric Fishing Reel Systems Okuma Fishing Tackle Corporation ZeeBaaS, LLC Corrosion Protection and Rust Preventive Coating Due to Polar Bonding, ReelX causes common metals and metal alloys such as iron, steel, stainless steel, aluminum, copper, brass, bronze, etc. to chemically behave more like noble metals (such as gold and platinum, which don't oxidize). In other words, as long as ReelX is present on metal, it can't rust or corrode! ReelX also has a high dielectric characteristic, so it's safe on electronics and completely shuts down electrolysis between dissimilar metals. To learn more about Polar Bonding and our unique Fluid Thin Film Coating (FTFC) technology, please visit our technology page. Minimal Environmental Impact Product The volatile organic content (usually abbreviated as VOC or VOCs) of ReelX is ZERO. Compare that to most products in the reel oil and spray lubricant categories, which can be as high as 50% or more VOC. That means ReelX is not only gentler on the environment, but it's also gentler on you and your equipment as well. Normalized SKU: 77000UPC Code: 761866779607

CorrosionX 61004 Waxes & CleanersCorrosionX RejeX Gallon #61004Normalized SKU: 61004UPC Code: 761866610047

CorrosionX 61001 Corrosion Inhibitors RejeX® is a thin-film polymer coating designed to provide a high-release protective finish for vehicles of all kinds. This very thin film – less than a micron thick – prevents stains and adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road grime, brake dust, etc. NOTHING STICKS BUT THE SHINE!™ It also makes graffiti easy to remove and can be applied to windshields to repel rain. It’s easy to apply and produces a deep, lustrous shine that outlasts the most popular waxes by months. RejeX contains none of the free silicone oils found in some other products that are known to contaminate paint and cause problems when repainting. REJEX APPLICATION Ideally, RejeX should be applied to a cool, dry, clean surface. When over 85° F, be sure to apply RejeX out of direct sunlight. If the surface is too hot, the coating can cure before it has properly bonded to the surface, so it may not perform up to its potential. RejeX is wiped on, allowed to dry to a haze for approximately 20 minutes, wiped off, then allowed to cure for 8-12 hours (depending on the humidity; the higher the humidity, the faster the cure). Curing is required to allow the monomers (polymer building blocks) that make up RejeX to attach to the surface being treated and to cross-link into a crystal-clear, impervious film. It is important to allow RejeX to cure for 8-12 hours after the haze has been wiped off. If the coating is exposed to contaminants such as oil, fuel, soot, hard water, tree sap, cleaners, etc. before it has cured, the contaminants may interfere with or embed in the protective film. Normalized SKU: 61001UPC Code: 761866610016

,CorrosionX 97102 Corrosion Inhibitors CorrosionX® Extended Duty (also know as CorrosionX XD) is a medium-build (thickened) version of CorrosionX®. The higher viscosity offers longer-term resilience against displacement of removal by splash or spray. CorrosionX XD penetrates existing rust and corrosion, displaces moisture, and prevents electrolysis. It leaves a non-hardening, self-healing coating for maximum protection against moisture intrusion while providing outstanding, long-lasting lubrication for all moving parts. Performs on already wet and corroded surfaces as well.  Being thinner than CorrosionX® Heavy Duty, XD can be easily atomized using Corrosion Technologies' Handi-Spray™ application systems. As a medium-build film, CorrosionX Extended Duty does not accumulate dust and dirt as grease does. CorrosionX XD contains no wax, tar, or silicone, and unlike wax coatings, will not dry, harden, or crack under stress. Safe on point, glass, gelcoat, wiring insulation, most rubber, plastics, and electronics. Normalized SKU: 97102UPC Code: 761866971025