Airmar 20-752-01 Transducers Replacement speed insert for B744V and B66V housings. Normalized SKU: 2075201

Airmar SS175C-0-H TransducersAirmar SS175C-0-H 0d TiltHigh CHIRP with No ConnectorModel: SS175C-0-H Depth and fast-response water-temperature sensor 1 kW with a maximum depth of 304 m (1000') High Frequency: 130 kHz to 210 kHz = 10° to 6° beamwidth 80 kHz of total bandwidth from one transducer High frequency provides superior shallow water performance, bottom detail and fish target separation Recommended boat size: Up to 11 m (36' Stainless steel housing is compatible with all hull types and materials Also available in a bronze housing (B175H) model Exclusive Xducer ID® technology Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The High frequency band delivers a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs and other structures. High frequency also delivers amazing target separation on baitfish and schooling gamefish. The SS175H delivers up to 80 kHz of total bandwidth in just one installation, and provides superior shallow water performance and bottom detail.Tilted element transducers have the element fixed at either a 20°, 12° or 0° angle within the transducer housing. Because the transducer is installed almost flush to the hull, when the transducer is installed the tilt corrects for the hull deadrise and orients the ceramic element horizontally to assure maximum echo returns to the transducer.Specifications Weight 2.7 kg (6 lb) Hull Deadrise Up to 24° Acoustic Window Urethane Hole Size 98 mm (3-7/8") One internal ceramic assembly Normalized SKU: SS175C0H

Airmar 41-842-1-01 TransducersAirmar SS175C-0-H 0d TiltHigh CHIRPModel: 41-842-1-01 High—CHIRPS from 130 kHz to 210 kHz, 15° to 9° beamwidth Available in 0°, 12°, or 20° tilted versions 80 kHz of total bandwidth from one transducer Depth & fast-response water-temperature sensor Steel transducer housing Boat Size: Up to 11 m (36’) Hull Type: Steel or aluminum Exclusive Xducer ID® technology Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.This transducer is designed for smaller boats up to 36 feet (11 m).A tilted element model in the Chirp Thru-Hull product line, the SS175H Chirps across the following bandwidth:H Model — High Frequency 130-210 kHzSpecifications Hull deadrise Up to 24° Acoustic window Urethane Weight 2.7 kg (6 lb) Normalized SKU: 41842101

Airmar 41-821-2-01 TransducersAirmar SS175C-0-HW 0d TiltHigh Wide CHIRPModel: 41-821-2-01 Depth & fast-response water-temperature sensor High—CHIRPS from 150 kHz to 250 kHz 25° constant beamwidth 100 kHz of total bandwidth from one transducer Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth Boat Size: 8 m (25’) and above Hull Type: Steel or aluminum Exclusive Xducer ID® technology Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducersA unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.Specifications Hull deadrise Up to 24° Acoustic window Urethane Weight 2.7 kg (6 lb) Normalized SKU: 41821201

Airmar 41-832-2-01 TransducersAirmar SS175C-0-L 0d TiltModel: SS175C-0-L Depth & fast-response water-temperature sensor Low—CHIRPS from 40 kHz to 75 kHz, 32° to 21° beamwidth Available in 0° or 12° tilted versions only Covers popular fishing frequency of 50 kHz plus everything else in the bandwidth Steel transducer housing Exclusive Xducer ID® technology Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.This transducer is designed for smaller boats up to 36 feet (11 m).A tilted element model in the Chirp Thru-Hull product line, the SS175L Chirps across the following bandwidth:L Model - Low Frequency 40-60 kHzSpecifications Hull Deadrise Up to 24° Acoustic Window Urethane Weight 2.7 kg (6 lb) Boat Size Up to 8 m (25’) Hull Type Steel or aluminum Normalized SKU: 41832201

Airmar S175C-0-M TransducersAirmar SS175C-0-M 0d TiltMedium CHIRP with with Garmin 8-PinModel: SS175C-0-M Depth and water-temperature sensor 1 kW with a maximum depth of 457 m (1500') Medium Frequency: 85 kHz to 135 kHz = 16° to 11° beamwidth 50 kHz of total bandwidth from one transducer Medium frequency provides excellent shallow to mid-depth performance, bottom detail and fish target separation Recommended boat size: Up to 11 m (36') Stainless steel housing is compatible with all hull types and materials Also available in a bronze housing (B175H) model Exclusive Xducer ID® technology Medium frequency delivers the right combination between coverage under the boat, extended depth range and the ability to produce clean and accurate target and structure returns in the mid to deeper water depths. Operating at a frequency range of 85 to 135 kHz, this transducer reveals fish at medium depths (up to 1500') and delivers ultra-clear target resolution.Tilted element transducers have the element fixed at either a 20°, 12° or 0° angle within the transducer housing. Because the transducer is installed almost flush to the hull, when the transducer is installed the tilt corrects for the hull deadrise and orients the ceramic element horizontally to assure maximum echo returns to the transducer.Specifications Weight 2.7 kg (6 lb) Hull Deadrise Up to 24° Acoustic Window Urethane Hole Size 98 mm (3-7/8") One internal ceramic assembly Normalized SKU: S175C0M

Airmar 41-830-2-01 TransducersAirmar SS175C-0-M 0d Tilt Medium CHIRPModel: 41-830-2-01 Medium—CHIRPS from 85 kHz to 135 kHz, 16° to 11° beamwidth Available in 0°, 12°, or 20° tilted versions 50 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth Boat Size: 8 m (25’) and above Hull Type: Steel or aluminum Exclusive Xducer ID® technology Hull Type: Steel or aluminum Exclusive Xducer ID® technology Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.This transducer is designed for smaller boats up to 36 feet (11 m).Specifications Hull deadrise Up to 24° Acoustic window Urethane Weight 2.7 kg (6 lb) Normalized SKU: 41830201

Airmar SS175C-0-MW-0 TransducersAirmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-0 Bare Wire Mix-N-Match CableModel: SS175C-0-MW-0 Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.****************************************************************** As of 05/29/2024 the bare wire only works with the Garmin GSD28 ******************************************************************Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-0 Bare Wire Mix-N-Match Cable Normalized SKU: SS175C0MW0

Airmar SS175C-0-MW-10F TransducersAirmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-10F Furuno 10-Pin Mix-N-Match CableModel: SS175C-0-MW-10F Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-10F Furuno 10-Pin Mix-N-Match Cable Normalized SKU: SS175C0MW10F

Airmar SS175C-0-MW-12F TransducersAirmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-12F Furuno 12-Pin Mix-N-Match CableModel: SS175C-0-MW-12F Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-12F Furuno 12-Pin Mix-N-Match Cable Normalized SKU: SS175C0MW12F

Airmar SS175C-0-MW-12G TransducersAirmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-12G Garmin 12-Pin Mix-N-Match CableModel: SS175C-0-MW-12G Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-12G Garmin 12-Pin Mix-N-Match Cable Normalized SKU: SS175C0MW12G

Airmar SS175C-0-MW-8G TransducersAirmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-8G Garmin 8-Pin Mix-N-Match CableModel: SS175C-0-MW-8G Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-8G Garmin 8-Pin Mix-N-Match Cable Normalized SKU: SS175C0MW8G

Airmar SS175C-0-MW-14HB TransducersAirmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-14HBX Humminbird 14-Pin Mix-N-Match CableModel: SS175C-0-MW-14HB Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-14HBX Humminbird 14-Pin Mix-N-Match Cable Normalized SKU: SS175C0MW14HB

Airmar SS175C-0-MW-MM TransducersAirmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With Mix-n-Match ConnectorModel: SS175C-0-MW-MM Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element Normalized SKU: SS175C0MWMM