Airmar DST810PV-N2 AccessoriesDST810 Plastic Smart Sensor 235kHz - NMEA 2000 - BluetoothDepth, Speed-Through-Water, Water Temperature, Boat AttitudeFor a product to be considered a “breakthrough,” it has to vastly change conventional behavior and enhance abilities. The  DST810 Smart Multisensor, together with Airmar's CAST™ App, is the convergence of advanced hull data, matched with a simple and reliable way to calibrate accurate speed via a wireless device. This changes how boaters receive and deliver information to get greater performance from their hull. It is a simple, consistent way to calibrate speed-through-water regardless of what display system is on board. The DST810 and Airmar CAST App deliver capabilities that until now, were only available through expensive PC-based software.Besides water temperature, depth, and upgraded 5 Hz (5X per second) speed-through-water output, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST App, makes heel-compensated speed calibration across multiple heel angles and speed ranges both fast and intuitive and is independent of the onboard instruments.All speed calibrations and NMEA configurations are stored in the DST810 sensor—not in the displays.Features 5 Hz speed output (5X per second) for visibly smoother speed-through-water reporting and faster data for better decision making Integrated attitude sensor for heel and trim benefits sailing and powerboats. Simple attitude calibration to correct for off-center mounting Hull Deadrise: Up to 22° Depth Frequency: 235 kHz Minimum Depth Range: 0.5 m (1.6') Maximum Depth Range: Up to 100 m (330')—NMEA 2000® Speed Range: Up to 45 knots Wireless Protocol: Bluetooth Low Energy (BLE) Wireless Range: Up to 30 feet depending on mount location Standard Cable Length: 6 m (20') DeviceNet—NMEA 2000® Temperature Sensor Accuracy: ±0.5°C (±1.8°F) Temperature Sensor Range: -10°C to 40°C (14°F to 104°F) Supply Voltage: 9 VDC to 16 VDC—per NMEA 2000 Wireless connectivity to Airmar's CAST App has user-friendly benefits: Calibrate the DST810 is a simple, intuitive way regardless of the instrument brand or model that is on board Conduct basic and advanced heel-compensated speed calibrations for improved speed-through-water outputs across the speed range Advanced Speed Calibration allows for manual speed entries for multiple heel angles and up to 10 speeds, formerly only possible through expensive PC software Enable and disable PGN’s and set offset and output rates The Perfect Sensor for Every UseSAILING 5 Hz speed output for visibly smoother speed data. Incredibly easy calibration via Airmar's CAST App. Wirelessly connect, calibrate speed, and configure data. DST810 stores configurations and delivers data to the NMEA 2000® network. Depth, heel-corrected speed-through-water, heel and trim, and water temperature from one installed multisensor. POWERBOATS 5 Hz speed, depth, pitch and roll, and water temperature from one installed instrument. Simple depth offsets and corrected speed-through-water via Airmar's CAST™ App. Popular depth sensor for shallow-water performance. Normalized SKU: DST810PVN2UPC Code: 801769005912

Download LiteratureAirmar PM111C-LHW TransducersPM111 LHW CHIRP 2kW Wide-Beam Chirp-Ready Pocket/Keel Mount - No ConnectorGet more coverage under your boat with Airmar’s unique wide-beam, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam transducer options.The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500').The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s dual-frequency, Chirp-ready transducer with wide-beam coverage.Features: The depth and fast-response water-temperature sensor 2 kW of power for great deep-water performance from the low frequency 2 kW low frequency: 38 to 75 kHz 19° to 10° port-starboard beamwidth 10° to 5° fore-aft beamwidth Maximum depth of 1,829 m (6,000') 1 kW high frequency: 150 to 250 kHz 25° constant beamwidth Maximum depth of 152 m (500') 137 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation High wide beamwidth yields more coverage for detecting fish in the upper-water column Urethane housing designed for custom mounting in a cavity Also available in an external (R109LHW) mount Exclusive Xducer ID® technology Specifications: Weight: 13.6 kg (30 lb.) Recommended Boat Length: 12 m (40') and above Hull Material: Solid fiberglass only Hull Deadrise: Accommodates any deadrise angle based on custom cavity construction Acoustic Window: Epoxy/urethane Transducer Element: 16 internal broadband ceramic assemblies This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: PM111CLHWAirmar PM111C-LHW Literature Download Product Brochure

Download LiteratureAirmar PM111C-LH TransducersPM111LH Pocket Mount - Low-High Chirp 2kW - No ConnectorA popular choice for boat builders, pocket mount transducers is installed within a small custom pocket in your vessel’s hull or keel, flush to the surface. Though retrofit installation is possible, these transducers are most commonly used in vessels with a suitable pre-cut pocket.Pocket-mounted transducers provide reliable and accurate sonar performance, with some impact on boat speed and fuel efficiency. As a common alternative, thru-hull transducers with a fairing block deliver comparable sonar performance and vessel impact.Features: Depth & fast-response water-temperature sensor Fiberglass and metal stepped, planing, or displacement hull types Advantages: All the benefits of a thru-hull without the need for a high-performance fairing Can accommodate any deadrise angle Can be used with all propulsion types Specifications:Low (38 kHz to 75 kHz): 19° to 10° port/star 10° to 5° fore-aft beam Maximum depth 6000 ft. High (130 kHz to 210 kHz): 8° to 4° beamwidth Max. depth 1500 ft. Bottom Coverage Relative to Frequency and Depth Depth (50 ft.): 6 ft. Depth (100 ft.): 14 ft. Depth (300 ft.): 42 ft. Depth (600 ft.): 84 ft. Depth (1000 ft.): 140 ft. Depth (1500 ft.): 210 ft. Depth (2000 ft.): Too deep This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: PM111CLHAirmar PM111C-LH Literature Download Product Brochure

Airmar 41-541-3-01 TransducersAirmar PM265-LM TransducerLow/Medium CHIRPModel: 41-541-3-01 Depth & fast-response water-temperature sensor Low—CHIRPS from 42 kHz to 65 kHz 25° to 16° beamwidth (port-starboard) Medium—CHIRPS from 85 kHz to 135 kHz 16° to 11° beamwidth 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidth Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) Bronze transducer housing Hull Type: Fiberglass only Exclusive Xducer ID® technology Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 103 kHz of total bandwidth in just one installation, saving customers time and money.A pocket/keel mount model in the Chirp Thru-Hull product line, the PM265 L/H Chirps across the following bandwidths:L/M Model — Low Frequency 42-65 kHz, Medium Frequency 85-135 kHzSpecifications Hull deadrise N/A Acoustic window Urethane Weight 5.2 kg (11.465 lb) Normalized SKU: 41541301

Airmar PM275C-LHW-MM TransducersPM275C-LHW CHIRP TransducerKeel-mount 1kW dual-band CHIRP fishfinder transducer.The PM265 is a Pocket/Keel mount unit available in the Low/Medium and Low/High bands. The PM275 is a wide beam version of the PM265 with Low/High bands and a wide beam.Specifications: Type: CHIRP dual-band fishfinder transducer LM Version: Low Band 42-65 kHz / Beam width 25-16° // Medium Band 85-135 kHz / Beam width 16-11° LH Version: Low Band 42-65 kHz / Beam width 25-16° // High Band 130-210 kHz / Beam width 10-6° LHW Version: Low Band 42-65 kHz / Beam width 25-16° // High Wide Band 150-250 kHz / Beam width 25° Power Rating: 1000 watts Mounting: Pocket/Keel Mount Housing: Urethane Hull Aperture: 1.75" (44.5mm) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: PM275CLHWMM

Airmar 41-694-2-01 TransducersAirmar PM275C-LHW TransducerLow High Wide CHIRPModel: 41-694-2-01 Ideal for marking baitfish and game fish in shallow to mid-water depths of 300ft - 600ft Depth & fast-response water-temperature sensor Low—CHIRPS from 42 kHz to 65 kHz 25° to 16° beamwidth High—CHIRPS from 150 kHz to 250 kHz 25° constant beamwidth 123 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Boat Size: 8 m (25’) and above Hull Type: Fiberglass or wood Exclusive Xducer ID® technology Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers.A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.Specifications Hull deadrise N/A Acoustic window Urethane Weight 5.25 kg (11.585 lb) Normalized SKU: 41694201

Download LiteratureAirmar PM411C-LWM TransducersPM411C-LWM Ultra Wide Pocket Mount 2kW Transducer - Low-Med - Depth/Temp - No ConnectorToday’s top billfish-tournament captains are calling Airmar’s PM411LWM their “go-to” transducer for seeking out targets and pinpointing them in deep water. This ultra-wide transducer features a 40° beamwidth for a fantastic amount of fish-finding coverage under the boat. Coupling the low-frequency range of 40 to 60 kHz with the medium range of 80 to 130 kHz, this tournament-series transducer reveals more fish in the water column than ever before.Features: The depth and fast-response water-temperature sensing 2 kW of power Low frequency: 40 to 60 kHz 40° beamwidth for ultra-wide coverage Maximum depth of 1219 m (4000') Medium frequency: 80 to 130 kHz 13° to 8° beamwidth Maximum depth of 914 m (3000') 70 kHz of total bandwidth from one transducer It covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Curved-edge design for wet-box installation Designed for custom pocket/keel/welded-tank mounting SEALCAST™, seamless, urethane housing for long life underwater Also available as a thru-hull external (R409LWM) mount Patented Xducer ID® technology MFG #41-806-1-02 Normalized SKU: PM411CLWMUPC Code: 801769002096Airmar PM411C-LWM Literature Download Product Brochure

Airmar PM275C-LHW TransducersPM275C-LHW Pocket/Keel Mount TransducerFeatures: Pocket/Keel mount wide-beam model with 1000W power rating Depth and fast-response water temperature sensor Wide-beam model with 25° constant beamwidth in High band and 16x-25x beamwidth in Low band With Low (42-65kHz) and High (150-250kHz) frequency bands Specifications:Beam Width = NONE Cable Length (Feet) = NONE Fairing Block Included = NONE Frequency = NONE Load Equivalence # (LEN) = NONE Mounting Style = NONE Pins = NONE Speed Included = NONE Temperature = NONENormalized SKU: PM275CLHW

Airmar R111C-LM TransducersR111C-LM In-Hull Chirp 2KW TransducerL/M Model -Low Frequency 38-75 kHz, Medium Frequency 80-130 kHzFeatures Depth & fast-response water-temperature sensor Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° beamwidth Medium—CHIRPS from 80 kHz to 130 kHz 13° to 8° beamwidth 87 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, 88, and 107 kHz plus everything else in the bandwidth Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking) Urethane transducer housing Hull Type: Solid fiberglass only Exclusive Xducer ID® technology Specifications Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: R111CLM

Airmar R509C-LH TransducersR509C-LH CHIRP TransducerFeatures: Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) 25-Internal, Broadband Ceramic Elements Broadband / CHIRP / Spread Spectrum Operating frequencies: Low—Chirps from 28 kHz to 60 kHz High—Chirps from 130 kHz to 210 kHz Beamwidth (Adjustable): Low—23° to 9° High—8° to 4° 10 m (33’) cable, no connector Fast-response water-temperature sensor Boat size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Transducer ID® Normalized SKU: R509CLHUPC Code: 801769001440

Airmar MMC-11R-HM AccessoriesRaymarine 11-Pin High or Med Mix & Match Transducer CHIRP Cable for CP470 Airmar MMC-11R CHIRP Mix and Match Transducer Cable 1M Raymarine 11-Pin.For use with Airmar's High or Med Single Band Mix and Match CHIRP transducers up to 1kW (1,000 watt). Normalized SKU: MMC11RHM

Airmar 260WR-2 TransducersSingle Handle Transducer Nut Wrench for B260, SS260, B265C, B275C260-WR-2 fits B260, SS260, B265C and B275C. Normalized SKU: 260WR2