00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Airmar
Airmar Paddle Wheel #33-493-01
$43.19
$51.82
Airmar 33-493-01 Transducers"Spares kit for S800 and ST800/ Contains all wearing parts in the paddlewheel and blankign plug. 1 - paddlewheel and shaft 2 - O-rings 1 - valve sleeve 1 - retaining ring Note: Not the same as ST600."Normalized SKU: 3349301
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Humminbird
Humminbird XTM-9-HW-T Trolling Motor Mount Transducer #710277-1
$117.35
$145.67
Humminbird 710277-1 TransducersXTM-9-H-T Dual Spectrum CHIRP Trolling Motor Transducer with Temp for HELIX®Trolling Motor Dual Spectrum CHIRP Transducer supports Dual Spectrum CHIRP 2D Sonar with high frequency beam and wide cone angle, offering CHIRP range of 150-220kHz. Includes built-in temperature sensor, rugged composite design and 20’ cable. Features:
This accessory is compatible with the following Humminbird products: HELIX 5 CHIRP G2 – GPS-equipped models only, HELIX 7 CHIRP G2/G3 – GPS-equipped and CHIRP DI G2 models, HELIX 7 CHIRP G2N/G3N – All models, HELIX 8 CHIRP G3N – All models, HELIX 9 CHIRP G2N/G3N – All models, HELIX 10 CHIRP G2N/G3N – All models, HELIX 12 CHIRP G2N/G3N – All models, ICE HELIX CHIRP G2 – All models (In Open Water Mode).
Side Imaging™ and Down Imaging™ units can support the XTM 9 HW T as a 2D sonar only transducer. This transducer does not support Side Imaging or Down Imaging.
Dual Spectrum CHIRP: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
Dual Spectrum CHIRP Max Depth: 1200ft (365m)
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 7102771UPC Code: 082324053146
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Garmin
Garmin 4-Pin Transducer to 12-Pin Sounder Adapter Cable #010-12718-00
$34.86
$41.61
Garmin 010-12718-00 Transducers4-Pin Transducer to 12-Pin Sounder Adapter CableConnect a 4-pin transducer to a 12-pin sonar port on your compatible marine device with this adapter cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 0101271800UPC Code: 753759197490
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Garmin
Garmin 4-Pin Transducer to 8-Pin Sonar Port #010-12721-00
$34.86
$41.61
Garmin 010-12721-00 Transducers4-Pin Transducer to 8-Pin Sonar PortConnect a 4-pin transducer to an 8-pin sonar port on your compatible marine device with this adapter cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 0101272100UPC Code: 753759197810
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lowrance
Lowrance Splitshot Skimmer T/M Transducer #000-14028-001
$98.82
$122.67
Lowrance 000-14028-001 TransducersSplitShot Skimmer Transom Mount TransducerSplitShot 2-in-1 Sonar with High CHIRP and DownScan Imaging™SplitShot 2-in-1 sonar makes it easier to stay on the fish, delivering the best traditional sonar views and lifelike images of fish-holding structure beneath and beside your boat. Specifications:Cable Length (Feet) = NONE Fairing Block Included = NONE Frequency = NONE Mounting Style = NONE Pins = NONE Speed Included = NONE Temperature = NONENormalized SKU: 00014028001UPC Code: 9420024166291
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Garmin
Garmin GT10HN-IF Ice Fishing Transducer #010-12677-00
$308.24
$391.48
Garmin 010-12677-00 TransducersGT10HN-IF Ice Fishing TransducerThe GT10HN-IF ice fishing transducer is perfect for fishermen who want clear definition under the ice with excellent target separation. The narrow, 7-16 degree beam angle provides precise fish and jig detection. The 8-pin transducer features high-narrow CHIRP traditional sonar and has a power rating of 500 W. Its shape and beam widths have been optimized for ice fishing, and it features a silicone-coated cable that remains flexible in harsh winter conditions. Includes a 8-pin to 4-pin transducer adapter cable, foam float and grommet.Includes:
GT10HN-IF Transducer
Float
Documentation
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 0101267700UPC Code: 753759188948
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lowrance
Lowrance Bullet/Splitshot Transom-Mount Bracket #000-14192-001
$16.46
$19.65
Lowrance 000-14192-001 TransducersBullet/SplitShot Transom Mount BracketTransom mount bracket for Bullet & SplitShot Transducers Normalized SKU: 00014192001UPC Code: 9420024168370
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Humminbird
Humminbird XM 14 20 MSI T Mega Si TM Transducer Solix #710265-1
$386.44
$482.33
Humminbird 710265-1 TransducersXM 14 20 MSI T Mega SI/DI Transom Mount Transducer - 14 PinMEGA SI, MEGA DI, DualBeam PLUS, 20/60/86/55 degrees, 200/83/455/800 kHz and 1.2 MHz, temperature built-in. For SOLIX MEGA Side Imaging units only. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:Cable Length (Feet) = NONE Fairing Block Included = No Frequency = 83/200/455/800/1.2 Mounting Style = Transom Pins = 14 Speed Included = No Temperature = YesNormalized SKU: 7102651UPC Code: 082324050466
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Navico
Navico XSONIC P79 In-Hull 50/200Khz 600w Depth Only #000-13942-001 XSONIC
$207.82
$263.94
Navico 000-13942-001 TransducersXSONIC P79 Adjustable 200/50kHz Plastic In-Hull Transducer - 9-PinThis entry level in-hull transducer with an adjustable deadrise angle makes installation a snap.The 9-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise.Transducer kit comes with installation instructions*. Follow the instructions carefully to avoid damaging your boat.*Fiberglass should be no more than 5/8" thick*Not recommended for cored hulls Specifications:Cable Length (Feet) = NONE Fairing Block Included = NONE Frequency = NONE Mounting Style = NONE Pins = NONE Speed Included = NONE Temperature = NONENormalized SKU: 00013942001UPC Code: 9420024163320
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Airmar
Airmar Humminbird 14-Pin Mix and Match CHIRP Cable 1m #MMC-14HB
$148.66
$188.81
Airmar MMC-14HB TransducersHumminbird 14-Pin Mix & Match Chirp Cable - 1MAirmar's 14-Pin Mix & Match Chirp Cable for HumminbirdFeatures:
Length: 1M
14-Pin
Specifically for Humminbird
Normalized SKU: MMC14HB
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Garmin
Garmin Right Angle Transducer Adapter 8-Pin #010-12262-00
$19.75
$23.57
Garmin 010-12262-00 TransducersRight Angle Transducer Adapter - 8-PinThis 8-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 0101226200UPC Code: 753759132316
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Raymarine
Raymarine Adapter Cable for Dragonfly DVS/Pro Newer #A80332
$37.29
$44.51
Raymarine A80332 TransducersAdapter Cable for CPT-70 and CPT-80 TransducersThis Raymarine adapter cable is required when hooking up a CPT-70 and CPT-80 transducer to a Dragonfly unit with a green locking collar. Normalized SKU: A80332UPC Code: 723193796122
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Humminbird
Humminbird Mhx Mxnt Transom-Mount Hardware for Mega Ducer #740162-1
$35.01
$41.79
Humminbird 740162-1 TransducersMHX MXNT Transom Mount Hardware f/MEGA TransducerStainless Steel mounting hardware for the XNT transom mount transducers.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 7401621UPC Code: 082324050435
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Navico
Navico Totalscan Replacement Bracket #000-13522-001
$66.00
$79.20
Navico 000-13522-001 TransducersTotalScan/StructureScan 3D Replacement BracketReplacement bracket for TotalScan & StructureScan 3D Transom Mount TransducersHardware included Normalized SKU: 00013522001UPC Code: 9420024157183
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Airmar
Airmar B164 20-Degree Tilted Transducer Blue Connector #B164-20-BL
$1,299.99
$1,492.91
Airmar B164-20-BL TransducersB164 1kW 20° Thru-Hull Transducer with Blue ConnectorStep up to a 1kW - Without a Fairing!Airmar has taken our innovative Tilted Element technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all.Low-profile protrusion below the hull - no affect on your boats running performanceThe ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.Features:
1 kW (1,000 Watts) RMS Power
Frequency: 50/200 kHz
Cone: 50 kHz - 22° x 20° / 200 kHz - 6° x 6°
Maximum Depth Range: 50 kHz - 353M to 529M (1,200' to 1,800') / 200 kHz - 152M to 235M (500' to 800')
Engineered for center-console and trailered boats
Interfaces to any 600W or 1 kW echosounder
Bronze (B164) Housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Usable Shaft Length: ~71mm (2.80")
Fixed 20° tilted version for 16° to 24° hull deadrise
10M Cable included
Specifications:Beam Width = NONE Cable Length (Feet) = NONE Fairing Block Included = NONE Frequency = 50/200 Load Equivalence # (LEN) = NONE Mounting Style = Thru-Hull Pins = NONE Speed Included = NONE Temperature = NONENormalized SKU: B16420BL
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Garmin
Garmin GT30-TH Thru-Hull DownVu/SideVu Transducer #010-01961-10
$681.80
$825.62
Download LiteratureGarmin 010-01961-10 TransducersGarmin GT30-TH - Stainless Steel Thru-hull DownVü/SideVü 500W (CHIRP 455/800 kHz) Scanning Transducer with Temp, for Hull Deadrises Less Than 5° (12-pin)Get ultra-clear sonar pictures of objects, structure and fish that pass below and to the side of your boat with this 12-pin thru-hull transducer with stainless steel stem.This transducer with built-in fast response temperature sensor has a power rating of 500 W per element (1,500 W total); a depth of 750 ft (DownVü) and 500 ft left and right (SideVü) an operating frequency of CHIRP 455/800 kHz; for hull deadrises less than 5 degrees. Pair it with your GCV™ 10 scanning sonar module.Includes transducer with stainless steel stem, fairing block, isolation plate and bushings, extension cable, mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat.Compatible Devices: GCV™ 10 Scanning Sonar ModuleWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 0100196110UPC Code: 753759152802Garmin 010-01961-10 Literature Download Owners Manual
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Airmar
Airmar Double Handle Wrench B75 SS75 #75WR-3
$70.44
$84.53
Airmar 75WR-3 Transducers75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.
Wrenches are constructed of 3/16" thick mild steel.
They can easily be bent or modified to accommodate challenging installation locations.
For use with:
B75
SS75
Normalized SKU: 75WR3
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Airmar
Airmar Wrench for B164 SS164 SS264 B175 #175WR-4
$75.00
$90.00
Airmar 175WR-4 Transducers175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with:
B164
B175
SS164
SS264
IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4". If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16". Normalized SKU: 175WR4
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Airmar
Airmar Wrench for B60 SS60 #60WR-4
$44.91
$53.89
Airmar 60WR-4 Transducers60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with:
B60
SS60
Normalized SKU: 60WR4
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Airmar
Airmar Transducer Wrench B164 SS164 B175C SS264 #164WR-2
$59.40
$71.28
Airmar 164WR-2 Transducers164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with:
B164
SS164
SS264
Normalized SKU: 164WR2
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.