EMP 61-08396 Seals The transom is where your boat and your sterndrive meet, and the seals in that area are the only thing standing between the open water and your bilge. When transom seals age, harden, or take on damage from UV exposure and constant flexing, they stop doing their job quietly and start doing it loudly, usually in the form of water intrusion that shows up in the bilge after a run. Catching and replacing worn transom seals before they fail completely is one of the more important maintenance tasks on any sterndrive-equipped boat. The EMP 61-08396 Transom Seal Kit is a complete sealing kit designed for MerCruiser Bravo and Blackhawk sterndrive applications. It includes the seals needed to properly reseal the transom assembly, covering the bellows, gimbal bearing area, and other critical sealing points in the transom plate. This is a direct replacement for Mercury part number 803100T1, so if you are cross-referencing from that number, you are in the right place. EMP builds this kit to OEM specifications, so every seal in the kit is the correct material, durometer, and dimension for the listed applications. Using properly spec'd seals in a transom assembly matters because the seals are exposed to constant water pressure, engine vibration, and the full range of temperatures that come with seasonal use. A seal that is too soft, too hard, or slightly off in dimension will not last as long as it should and may not seal as well as it needs to. If you are pulling the drive for any reason, whether it is a scheduled service, a u-joint replacement, or a bellows inspection, this is the right time to freshen up the transom seals. The labor to access this area is the same regardless of whether you replace the seals or not, so the math on doing it while you are already in there is pretty straightforward. Compatibility and specs at a glance: Fits MerCruiser Bravo sterndrive applications Fits MerCruiser Blackhawk sterndrive applications Complete transom seal kit for a full reseal of the transom assembly Replaces Mercury 803100T1 Built to OEM specifications by EMP Direct replacement, no modification required for listed applications Normalized SKU: 6108396UPC Code: 840080431482

EMP 26-13107 Seals EMP Gearcase Seal KitFor 1989-90/2001-05 Johnson/Evinrude V4. 90 Hp | V6, 150-225 Hp outboards.Replaces: Sierra: 18-2692GLM: 86712Mallory: 9-74113Normalized SKU: 2613107UPC Code: 840080450001

EMP 26-00323 SealsEMP Lower Unit Seal Kit #26-00323Normalized SKU: 2600323UPC Code: 840080497532

EMP 26-01888 SealsEMP Seal Kit #26-01888Normalized SKU: 2601888UPC Code: 840080452388

EMP 26-02202 SealsEMP Upper Gearcase Seal Kit #26-02202Normalized SKU: 2602202UPC Code: 840080449906

EMP 26-00835 Seals EMP Gearcase Seal KitFor 1994-2006 Mercury/Mariner V6, 200-300 Hp outboard gearcases.Replaces: Mercury 816575A4Also crosses with:Sierra: 18-8382GLM: 87512Mallory: 9-74208Normalized SKU: 2600835UPC Code: 840080459097

EMP 26-00318 SealsEMP Lower Unit Seal Kit #26-00318Normalized SKU: 2600318UPC Code: 840080497464

EMP 26-00074 Seals EMP Exhaust SealFor 1979-2005 Johnson/Evinrude 2-cyl, 35-60 Hp | 3-cyl, 70-75 Hp outboards.Replaces: BRP 324937 | 313656Also crosses with:Sierra: 18-2537Barr: OMC47-324937GLM: 86210Normalized SKU: 2600074UPC Code: 840080411323

EMP 26-00321 SealsEMP Lower Unit Seal Kit #26-00321Normalized SKU: 2600321UPC Code: 840080497495

Recmar REC93101-10M14 SealsRecmar Bonded Seal #REC93101-10M14Normalized SKU: REC9310110M14UPC Code: 8435412002427

Recmar REC93101-13M27 SealsRecmar Seal #REC93101-13M27Normalized SKU: REC9310113M27UPC Code: 8435422148917

Recmar REC93101-20M07 SealsRecmar Seal Bearing Carrier #REC93101-20M07Normalized SKU: REC9310120M07UPC Code: 8435412013102

Recmar REC93101-23070 SealsRecmar Seal Vertical Shaft #REC93101-23070Normalized SKU: REC9310123070UPC Code: 8435412026409