Download LiteratureActisense A2K-TDC-0M25 Network AccessoriesA2K-TDC-0M25 NMEA2000 Micro Cable Assembly - 0.25MAvailable in various lengths, the cable assemblies can be used as either a drop cable from a NMEA 2000 backbone or to extend the length of the backbone cable.Actisense Lite cable assemblies allow quick installation and come with quality reassurance as only the Actisense UL-certified cable is used.NMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires, and a drain wire. The drain wire connects to the cable shield, which protects the signal, power, and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.NMEA 2000 Lite cable can be used to create a backbone up to 100 meters in length. If the backbone length required exceeds 100 meters, the center of the bus can be extended with an NMEA 2000 mini cable to keep the outer Lite sections to the 100-meter maximum.The maximum length of a drop cable (distance from the backbone) is 6 meters. It is important to limit each drop length to the minimum required, as the total of all drop lengths must not exceed 72 meters.The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.Technical Specifications: Rated Current - 3A Rated Voltage - 60VDC Male Contact - Brass, gold plated Female Contact - Phosphor bronze, gold plated Contact Carrier - PBT, black Contact Polarization - Standard M12 -“A”- polarization Mating Thread - M12 Screw Cap - Brass, nickel plated O-Ring Seal - Rubber, black Housing - PVC, black Power Pair - 22 AWG (19-strand tinned copper) Data Pair - 24 AWG (19-strand tinned copper) Drain - 22 AWG (19-strand tinned copper) Braid - 37 AWG (tinned copper) Jacket Material - 0.8mm Nom. PVC, black Jacket Outer Diameter - 6.85mm ±0.254mm Weight -  51g Protection - IP67 (when mated) Operating Temperature - -20°C to +70°C Storage Temperature - -40°C to +85°C This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: A2KTDC0M25Actisense A2K-TDC-0M25 Literature Download Owners Manual Product Brochure

Download LiteratureActisense A2K-TDC-0M5 Network AccessoriesA2K-TDC-0M5 NMEA2000 Micro Cable Assembly - 0.5MAvailable in various lengths, the cable assemblies can be used as either a drop cable from a NMEA 2000 backbone or to extend the length of the backbone cable.Actisense Lite cable assemblies allow quick installation and come with quality reassurance as only the Actisense UL-certified cable is used.NMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires, and a drain wire. The drain wire connects to the cable shield, which protects the signal, power, and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.NMEA 2000 Lite cable can be used to create a backbone up to 100 meters in length. If the backbone length required exceeds 100 meters, the center of the bus can be extended with an NMEA 2000 mini cable to keep the outer Lite sections to the 100-meter maximum.The maximum length of a drop cable (distance from the backbone) is 6 meters. It is important to limit each drop length to the minimum required, as the total of all drop lengths must not exceed 72 meters.The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.Technical Specifications: Rated Current - 3A Rated Voltage - 60VDC Male Contact - Brass, gold-plated Female Contact - Phosphor bronze, gold plated Contact Carrier - PBT, black Contact Polarization - Standard M12 -“A”- polarization Mating Thread - M12 Screw Cap - Brass, nickel plated O-Ring Seal - Rubber, black Housing - PVC, black Power Pair - 22 AWG (19-strand tinned copper) Data Pair - 24 AWG (19-strand tinned copper) Drain - 22 AWG (19-strand tinned copper) Braid - 37 AWG (tinned copper) Jacket Material - 0.8mm Nom. PVC, black Jacket Outer Diameter - 6.85mm ±0.254mm Weight -  67g Protection - IP67 (when mated) Operating Temperature - -20°C to +70°C Storage Temperature - -40°C to +85°C This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: A2KTDC0M5Actisense A2K-TDC-0M5 Literature Download Owners Manual Product Brochure

Download LiteratureActisense A2K-TDC-10M Network AccessoriesA2K-TDC-10M NMEA2000 Micro Cable Assembly - 10MAvailable in various lengths, the cable assemblies can be used as either drop cable from a NMEA 2000 backbone or to extend the length of the backbone cable.Actisense Lite cable assemblies allow quick installation and come with quality reassurance as only the Actisense UL-certified cable is used.NMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires, and a drain wire. The drain wire connects to the cable shield, which protects the signal, power, and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.NMEA 2000 Lite cable can be used to create a backbone up to 100 meters in length. If the backbone length required exceeds 100 meters, the center of the bus can be extended with an NMEA 2000 mini cable to keep the outer Lite sections to the 100-meter maximum.The maximum length of a drop cable (distance from the backbone) is 6 meters. It is important to limit each drop length to the minimum required, as the total of all drop lengths must not exceed 72 meters.The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.Technical Specifications: Rated Current - 3A Rated Voltage - 60VDC Male Contact - Brass, gold-plated Female Contact - Phosphor bronze, gold plated Contact Carrier - PBT, black Contact Polarization - Standard M12 -“A”- polarization Mating Thread - M12 Screw Cap - Brass, nickel plated O-Ring Seal - Rubber, black Housing - PVC, black Power Pair - 22 AWG (19-strand tinned copper) Data Pair - 24 AWG (19-strand tinned copper) Drain - 22 AWG (19-strand tinned copper) Braid - 37 AWG (tinned copper) Jacket Material - 0.8mm Nom. PVC, black Jacket Outer Diameter - 6.85mm ±0.254mm Weight -  688g Protection - IP67 (when mated) Operating Temperature - -20°C to +70°C Storage Temperature - -40°C to +85°C This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: A2KTDC10MActisense A2K-TDC-10M Literature Download Owners Manual Product Brochure

Maretron A3708 Network AccessoriesCLMD16-J2 Output Mating Connector with 1M LeadsOutput (J2) Mating Connector with 1m Flying Leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: A3708UPC Code: 873804004303

Download LiteratureBluewater 2706-00-000 Network AccessoriesNMEA 2000 Power IsolatorThe NMEA 2000 power isolator is designed to safely separate power between two segments of an NMEA 2000 network while still allowing data to pass through uninterrupted. This is essential when integrating networks with multiple power sources or when isolating a section for troubleshooting, protection, or independent control.Built with rugged marine-grade materials, this 5-pin inline isolator meets all NMEA 2000 standards and maintains network integrity in even the harshest environments. Ideal for complex installations, refits, or OEM systems, the NMEA 2000 power isolator adds flexibility, reliability, and protection to your marine electronics setup, ensuring long-term performance without compromising signal quality. Normalized SKU: 270600000UPC Code: 810196330436Bluewater 2706-00-000 Literature Download Product Brochure

Download LiteratureBluewater 2705-00-010 Network AccessoriesNMEA 2000 Female Terminator - 120 ohmNMEA 2000 terminators are essential components for completing and stabilizing your marine electronics network. Installed at each end of the backbone, these 120-ohm resistive terminators ensure proper signal integrity, reduce interference, and prevent data loss across all connected NMEA 2000 devices.Our terminators are engineered from marine-grade materials to resist corrosion, moisture, and vibration. They maintain full compliance with NMEA 2000 standards and are easy to install in both new builds and retrofit projects.Whether you’re expanding your system or troubleshooting, NMEA terminators are critical for dependable network performance in any environment. Normalized SKU: 270500010UPC Code: 810196330429Bluewater 2705-00-010 Literature Download Product Brochure

Download LiteratureBluewater 2705-00-001 Network AccessoriesNMEA 2000 Male Terminator - 120 ohmNMEA 2000 terminators are essential components for completing and stabilizing your marine electronics network. Installed at each end of the backbone, these 120-ohm resistive terminators ensure proper signal integrity, reduce interference, and prevent data loss across all connected NMEA 2000 devices.Our terminators are engineered from marine-grade materials to resist corrosion, moisture, and vibration. They maintain full compliance with NMEA 2000 standards and are easy to install in both new builds and retrofit projects.Whether you’re expanding your system or troubleshooting, NMEA terminators are critical for dependable network performance in any environment. Normalized SKU: 270500001UPC Code: 810196330412Bluewater 2705-00-001 Literature Download Product Brochure

Download LiteratureBluewater 2704-12-011 Network AccessoriesNMEA 2000 Right Angle AdapterThe NMEA 2000 right-angle adapter is a compact solution for tight installations where standard straight connectors won’t fit. With a 90-degree design, it reduces cable strain and allows for a clean, low-profile connection to your NMEA 2000 network backbone or drop cable.Built to NMEA 2000 specifications, this 5-pin adapter maintains full network compatibility and ensures a secure, waterproof connection. It’s perfect for dashboards, enclosures, and other areas where space is limited but reliability is critical. Normalized SKU: 270412011UPC Code: 810196330405Bluewater 2704-12-011 Literature Download Product Brochure

Bluewater 2703-11-002 Network AccessoriesNMEA 2000 Non-Fused Power Cable - 2 MeterThis NMEA 2000 power cable (no fuse) is designed to deliver clean, reliable power to your NMEA 2000 network. Featuring a 5-pin molded connector on one end and stripped wire leads on the other, it allows for a direct power connection to your vessel’s electrical system when an inline fuse is already installed elsewhere in the circuit.Ideal for custom installations, OEM builds, or replacement applications, this cable meets NMEA 2000 standards for secure connectivity and consistent performance. Its simplified, fuse-free design offers flexibility for installers who want full control over fuse placement in their marine electronics setup. Normalized SKU: 270311002UPC Code: 810196330399

Bluewater 2702-15-015 Network AccessoriesNMEA 2000 4-Way T-ConnectorOur NMEA 2000 T-Connector makes it easy to expand your marine electronics network by providing secure connection points between backbone cables and connected devices. Built to NMEA 2000 standards, each NMEA T-connector features rugged, waterproof 5-pin connectors for reliable data transmission in harsh marine environments.These t-connectors give you flexible installation options for both small and complex NMEA 2000 networks. Whether you’re adding a single display, integrating multiple sensors, or connecting additional power feeds, these compact, durable t-connectors help keep wiring organized, improve accessibility, and ensure your network remains dependable and efficient over time. Normalized SKU: 270215015UPC Code: 810196330375

Bluewater 2702-14-014 Network AccessoriesNMEA 2000 3-Way T-ConnectorOur NMEA 2000 T-Connector makes it easy to expand your marine electronics network by providing secure connection points between backbone cables and connected devices. Built to NMEA 2000 standards, each NMEA T-connector features rugged, waterproof 5-pin connectors for reliable data transmission in harsh marine environments.These t-connectors give you flexible installation options for both small and complex NMEA 2000 networks. Whether you’re adding a single display, integrating multiple sensors, or connecting additional power feeds, these compact, durable t-connectors help keep wiring organized, improve accessibility, and ensure your network remains dependable and efficient over time. Normalized SKU: 270214014UPC Code: 810196330368

Bluewater 2702-13-013 Network AccessoriesNMEA 2000 2-Way T-ConnectorOur NMEA 2000 T-Connector makes it easy to expand your marine electronics network by providing secure connection points between backbone cables and connected devices. Built to NMEA 2000 standards, each NMEA T-connector features rugged, waterproof 5-pin connectors for reliable data transmission in harsh marine environments.These t-connectors give you flexible installation options for both small and complex NMEA 2000 networks. Whether you’re adding a single display, integrating multiple sensors, or connecting additional power feeds, these compact, durable t-connectors help keep wiring organized, improve accessibility, and ensure your network remains dependable and efficient over time. Normalized SKU: 270213013UPC Code: 810196330351

Download LiteratureBluewater 2702-12-012 Network AccessoriesNMEA 2000 T-ConnectorOur NMEA 2000 T-Connector makes it easy to expand your marine electronics network by providing secure connection points between backbone cables and connected devices. Built to NMEA 2000 standards, each NMEA T-connector features rugged, waterproof 5-pin connectors for reliable data transmission in harsh marine environments.These t-connectors give you flexible installation options for both small and complex NMEA 2000 networks. Whether you’re adding a single display, integrating multiple sensors, or connecting additional power feeds, these compact, durable t-connectors help keep wiring organized, improve accessibility, and ensure your network remains dependable and efficient over time. Normalized SKU: 270212012UPC Code: 810196330344Bluewater 2702-12-012 Literature Download Product Brochure

Download LiteratureBluewater 2700-55-011 Network AccessoriesNMEA 2000 Drop Cable - 0.5 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable, waterproof connectors, it ensures a secure and interference-free connection to displays, GPS units, sensors, and more. Built to NMEA 2000 standards, this drop line supports dependable communication across all major marine brands. Whether you’re expanding your system or replacing a worn connection, this marine network cable is an essential component for clean, efficient, and reliable wiring.Made from rugged materials, it resists saltwater corrosion, UV exposure, and mechanical wear, ensuring long-lasting performance in demanding marine environments. Normalized SKU: 270055011UPC Code: 810196330337Bluewater 2700-55-011 Literature Download Product Brochure