00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Barb Hose Aluminum & 3/8" x 3/8" #22-05308
$2.64
$3.10
EMP 22-05308 Hose and Tank Fittings
The EMP 22-05308 is an aluminum male hose barb fitting with a 3/8" NPT threaded end and a 3/8" hose barb end. It is a universal fitting used across a wide range of marine fuel system, cooling system, and fluid line applications wherever a threaded port needs to transition to a hose run of the same size.
The 3/8" NPT thread screws into a standard threaded port on a tank, pump, manifold, or engine component, while the 3/8" barb accepts standard 3/8" marine hose. Both ends are the same size, so there is no reduction involved, making this a straightforward straight-through adapter from threaded to barbed connection.
Aluminum construction holds up well in marine fuel and coolant environments, resisting corrosion better than steel in both freshwater and saltwater applications. The 3/8" NPT thread and 3/8" hose barb combination is one of the most common sizes in marine fuel system rigging, so this fitting covers a broad range of outboard, inboard, and sterndrive setups.
It crosses with Moeller 033443-10 for those verifying fitment across suppliers.
Cross References:Moeller: 033443-10
Normalized SKU: 2205308UPC Code: 840080477633
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Splice Hose Double Barb 3/8" #22-05307
$4.17
$4.90
EMP 22-05307 Hose and Tank Fittings
The EMP 22-05307 is a double barb hose splice fitting for 3/8 inch inner diameter hose. The male-by-male barb configuration makes it a straightforward solution for joining two sections of 3/8 inch hose, whether you're repairing a fuel line, extending a run, or routing around an obstacle. It's a universal fit, so it works across a wide range of marine fuel and fluid system applications.
Fitting specifications:
Hose I.D.: 3/8 inch
Connection type: Hose barb x hose barb (male x male)
Application: Universal
Also crosses with Moeller 033213-10.
Normalized SKU: 2205307UPC Code: 840080477626
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Splice Hose Double Barb 5/16" #22-05306
$4.17
$4.90
EMP 22-05306 Hose and Tank Fittings
The EMP 22-05306 is a 5/16" double hose barb splice fitting, designed to join two sections of 5/16" inner diameter hose in a straight inline connection. It is a universal fitting with a male barb on each end, making it a clean and simple solution for splicing a fuel line, extending a hose run, or repairing a section of damaged hose without replacing the entire line.
The 5/16" inner diameter is one of the most common hose sizes in outboard fuel systems, so this splice sees regular use across a wide range of marine applications. Both barbed ends accept standard 5/16" hose and are designed to hold securely with hose clamps for a leak-free connection at each joint.
Whether you are making a field repair on a fuel line or routing a new hose run that needs a mid-line connection, this fitting handles it cleanly. It crosses with Moeller 33212-10 for those verifying fitment across suppliers.
Cross References:Moeller: 33212-10
Normalized SKU: 2205306UPC Code: 840080477602
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Barb Hose 1/4" NPT x 5/16" #22-05304
$4.27
$5.02
EMP 22-05304 Hose and Tank Fittings
The EMP 22-05304 is a male hose barb fitting with a 1/4" NPT thread on one end and a 5/16" hose barb on the other. It is a direct replacement for Mercury 22-63187 and Johnson/Evinrude 173311, covering OEM fuel system fittings from both brands.
The 1/4" NPT thread side connects to the fuel system component, while the 5/16" barb side accepts standard 5/16" fuel hose. Getting the right barb size matters for a leak-free connection, and this one is spec'd to match the original Mercury and Johnson/Evinrude fitment exactly.
It also crosses with Sierra 18-8055 and Moeller 33430-10 if you are sourcing by either of those part numbers.
Normalized SKU: 2205304UPC Code: 840080477589
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Hose Barb Male 1/4" NPT x 1/4" #22-05303
$5.90
$6.94
EMP 22-05303 Hose and Tank Fittings
The EMP 22-05303 is a male hose barb fitting with a 1/4" NPT threaded end and a 1/4" hose barb end. It's a universal fitting, meaning it's not application-specific to a single OEM but rather a standard hardware piece used across a wide range of marine fuel system builds, repairs, and custom line routing.
The 1/4" NPT thread screws into a threaded port on a tank, pump, or component, while the 1/4" barb accepts standard 1/4" fuel line hose. It's the kind of fitting that comes in handy when you're routing a new fuel line, replacing a corroded barb, or adapting between a threaded fitting and a hose run.
It crosses with Sierra 18-8042 and Moeller 33401-10, so if you're comparing across suppliers or verifying the spec against a known part number, those are your reference points.
Cross References:Sierra: 18-8042Moeller: 33401-10
Normalized SKU: 2205303UPC Code: 840080477794
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Hose Barb Male 1/8" NPT x 3/8" #22-05302
$6.51
$7.66
EMP 22-05302 Hose and Tank FittingsEMP Hose Barb Male 1/8" NPT x 3/8" #22-05302Normalized SKU: 2205302UPC Code: 840080477787
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Female 3/8" Hose #22-05123
$8.04
$9.46
EMP 22-05123 Hose and Tank Fittings
The EMP 22-05123 is a female fuel connector with a 3/8" hose barb, designed as a direct replacement for Mercury and Yamaha outboard fuel systems. It sits on the hose side of the fuel line and mates directly with the EMP 22-05121 male tank connector, making the two a natural pairing for a complete connector replacement.
The 3/8" hose barb fits standard marine fuel line and provides a secure connection at the engine end of the fuel system. It replaces Mercury 22-13563T and Yamaha 6E5-24305-06-00, covering a solid range of Mercury and Yamaha outboard applications where this style of quick-connect fuel fitting is used.
If the original connector is cracking, leaking, or just worn from years of fuel exposure, this is a straightforward swap that gets the fuel line back in proper working order. It also crosses with several well-known aftermarket options for easy comparison.
Replaces OEM:Mercury 22-13563TYamaha 6E5-24305-06-00
Cross References:Sierra: 18-80415Attwood: 8896LP6Moeller: 033484-10Scepter: 05815
Normalized SKU: 2205123UPC Code: 840080477565
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Female 5/16" Hose #22-05122
$8.04
$9.46
EMP 22-05122 Hose and Tank Fittings
The EMP 22-05122 is a female fuel connector with a 5/16" hose barb, built as a direct replacement for Mercury OEM part 22-13563T. It is designed to mate with the EMP 22-05121 male tank connector, so if you are building out or replacing a complete Mercury fuel line connection, these two work together as a matched pair.
The 5/16" hose barb is the standard size for Mercury outboard fuel line connections, making this a straightforward swap when your original connector is worn, cracked, or leaking.
It also crosses with Sierra 18-8085, Attwood 88FHY516-6, Moeller 033471-10, and Septor 05813, giving you solid cross-reference coverage across the major aftermarket brands.
Normalized SKU: 2205122UPC Code: 840080477541
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Male Tank 1/4" NPT #22-05121
$9.66
$11.53
EMP 22-05121 Hose and Tank Fittings
The EMP 22-05121 is a male fuel tank connector with 1/4" NPT threads, designed as a direct replacement for Yamaha OEM part ABA-FCONN-CT-OR. It pairs with EMP connectors 22-05122 and 22-05123, so building out a complete fuel line connection is simple when you need the full set.
The 1/4" NPT thread size is a standard fit across a wide range of Yamaha outboard fuel systems, and the connector is built to handle the demands of a marine fuel environment without fuss.
Also crosses with Sierra 18-8077-1, giving you a couple of reliable reference points if you are sourcing by cross-reference.
Normalized SKU: 2205121UPC Code: 840080477527
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Female 5/16" Hose Chrysler & Force #22-05119
$19.89
$23.74
EMP 22-05119 Hose and Tank Fittings
This is a female fuel connector for 5/16" hose, replacing Chrysler and Force OEM part number F197787T3. It uses an engine-side quick connect design and mates with the male connector EMP 22-05106.
Compatible applications include:
All Chrysler and Force outboards (1992 and prior)
Tohatsu outboards (engine quick connect)
Older Honda outboards (engine quick connect)
Suzuki 75 HP and up (large connector)
9.9/15/25 HP (1997 and prior)
5 HP (1993 and later)
Also crosses with the following aftermarket part number:
Moeller: 033464-10
Normalized SKU: 2205119UPC Code: 840080477497
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Male Tank 1/4" NPT Chrysler & Force #22-05118
$8.63
$10.30
EMP 22-05118 Hose and Tank Fittings
This is a male tank-side fuel connector with a 1/4" NPT thread, replacing Chrysler and Force OEM part number F213238T2. It serves as the tank adaptor for Chrysler, Force, and Suzuki (small) applications and mates with the female engine-side connector EMP 22-05119.
Compatible applications include:
All Chrysler and Force outboards (1992 and prior)
9.9/15/25 HP (1997 and prior)
5 HP (1993 and later)
Also crosses with the following aftermarket part numbers:
Sierra: 18-8071
Attwood: 14509-6
Moeller: 033461-10
Normalized SKU: 2205118UPC Code: 840080477459
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Female 3/8" Hose #22-05117
$8.63
$10.30
EMP 22-05117 Hose and Tank Fittings
The EMP 22-05117 is a female fuel connector for 3/8" hose, designed as a direct replacement for Mercury's old bayonet-style fuel connector. If you're working on an older Mercury outboard and the original bayonet-style connector has seen better days, this is the part that gets you back on the water without a trip to the dealership.
The 3/8" hose barb fits the bayonet-style fuel line connection found on older Mercury engines. It's a straightforward swap that restores a clean, leak-free fuel connection between your portable tank and the motor.
This connector crosses with several well-known aftermarket sources: Sierra 18-8083, Attwood 14534-6, Moeller 033418-10, and Septor 09476.
OEM: Mercury
Normalized SKU: 2205117UPC Code: 840080477732
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Male 3/8" Hose Mercury #22-05116
$8.08
$9.64
EMP 22-05116 Hose and Tank Fittings
The EMP 22-05116 is a male fuel connector for 3/8" hose, built to replace Mercury's old bayonet-style male fuel connector. It's the tank-side half of the fuel line connection, pairing with a female connector on the engine side to complete the fuel delivery path between your portable tank and outboard.
The 3/8" hose barb gives you a secure, leak-resistant fit on standard 3/8" fuel line. If the original bayonet-style connector on your Mercury setup is cracked, stiff, or no longer sealing properly, this is a direct swap that restores a clean connection without any modification.
This connector crosses with: Sierra 18-8084, Attwood 13532-6, Moeller 033421-10, and Septor 07497.
OEM: Mercury
Normalized SKU: 2205116UPC Code: 840080477725
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Female Tank #22-05115
$9.10
$10.86
EMP 22-05115 Hose and Tank Fittings
The EMP 22-05115 is a female fuel tank connector built to replace Mercury's old bayonet-style tank fitting. This is the connector that threads directly into the fuel tank, using 1/4" NPT threads, and accepts the male fuel line connector on the other end to complete the fuel delivery circuit.
The 1/4" NPT thread is a standard tapered pipe thread, so fitment into the tank port is straightforward. If the original fitting is leaking, cracking, or the bayonet locking mechanism has worn out, this is a clean, direct replacement that restores a proper seal at the tank.
This connector crosses with Sierra 18-8082.
OEM: Mercury
Normalized SKU: 2205115UPC Code: 840080477718
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Female 3/8" Hose #22-05114
$7.63
$8.98
EMP 22-05114 Hose and Tank Fittings
The EMP 22-05114 is a female fuel line connector sized for 3/8" hose barb connections, designed as a direct replacement for Mercury 22-13563T. If your fuel line connector is cracked, leaking, or just worn out from years of sun and fuel exposure, this is the part that gets you back on the water without a trip to the dealer.
This connector mates with the EMP 22-05113 male connector, making the two a matched pair for fuel line quick-disconnect setups on Mercury outboard applications. The 3/8" hose barb size is one of the most common in Mercury fuel systems, so this fitting sees a lot of use across a wide range of engine models.
It crosses directly with several well-known aftermarket and OEM part numbers, giving you confidence that you are ordering the right part regardless of which brand you have been running:
OEM: Mercury 22-13563T
Sierra: 18-8076
Attwood: 8890LP6
Moeller: 033482-1
Spetor: 05793
Installation is a straightforward push-and-click connection. No tools required for the quick-disconnect itself, though you will want a hose clamp on the barb end to ensure a secure, leak-free seal on the hose side.
Normalized SKU: 2205114UPC Code: 840080477435
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Male Tank 1/4" NPT #22-05113
$13.00
$15.52
EMP 22-05113 Hose and Tank Fittings
The EMP 22-05113 is a male fuel line connector with 1/4" NPT threads, designed for Mercury outboard fuel tank applications. This is the tank-side connector in a quick-disconnect fuel line assembly, and it mates directly with the EMP 22-05114 female connector to form a complete quick-disconnect pair. If you are replacing one, it is worth checking the condition of the other while you are at it.
The 1/4" NPT thread is a tapered pipe thread that installs into the female-threaded port on the fuel tank fitting or tank selector valve. NPT threads seal on the thread taper itself, so apply thread sealant tape or a marine-grade pipe thread compound to the threads before installation to ensure a fuel-tight connection. Do not overtighten, as NPT fittings can crack the receiving port if forced.
This connector is used across a wide range of Mercury outboard portable and built-in tank setups where the standard 1/4" NPT quick-disconnect configuration is used. It is a genuine Mercury OEM-style replacement and fits applications where the original Mercury male tank connector has cracked, stripped, or simply worn out from years of connecting and disconnecting the fuel line.
It crosses directly with the following part numbers:
Sierra: 18-8077-1
Attwood: 8873-6
Quick-disconnect fuel connectors take more abuse than they get credit for. Every time the fuel line gets connected or disconnected at the dock or during trailering, these fittings do the work. A connector that leaks or fails to seat properly is not something to ignore on a fuel system.
Normalized SKU: 2205113UPC Code: 840080477428
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Female 3/8" Hose #22-05112
$6.92
$8.14
EMP 22-05112 Hose and Tank Fittings
The EMP 22-05112 is a female fuel connector with a 3/8" hose barb, built as a direct replacement for Johnson and Evinrude OEM part 775641. The 3/8" hose barb size is the standard fit for Johnson and Evinrude fuel line setups, so if your connector is cracked, leaking, or just due for replacement, this one drops right in.
It also crosses with Sierra 18-8092, Attwood 8889LP6, Moeller 033480-10, and Spetor 05822, giving you plenty of reference points if you are sourcing from any of those brands.
A female connector handles the engine side of the fuel line connection. Keeping that connection solid and leak-free is basic maintenance that pays off every time you turn the key.
Normalized SKU: 2205112UPC Code: 840080477404
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Female 5/16" Hose #22-05111
$7.12
$8.38
EMP 22-05111 Hose and Tank Fittings
The EMP 22-05111 is a female fuel connector with a 5/16" hose barb, built as a direct replacement for Johnson and Evinrude OEM part 775640. The 5/16" hose barb is the standard size for Johnson and Evinrude outboard fuel line connections, so this one fits right in without any modification.
It also crosses with Sierra 18-8056, Attwood 88FHE516-6, Moeller 033477-10, and Septor 05837, covering the major aftermarket brands if you are sourcing by cross-reference.
The female connector sits on the engine side of the fuel line. If yours is cracking, leaking, or just showing its age, swapping it out is a quick fix that keeps fuel where it belongs.
Normalized SKU: 2205111UPC Code: 840080477398
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Male Tank 1/4" NPT Johnson/Evinrude #22-05110
$8.63
$10.30
EMP 22-05110 Hose and Tank Fittings
The EMP 22-05110 is a male tank fuel connector with 1/4" NPT threads, built as a direct replacement for Johnson and Evinrude outboard fuel systems. It replaces OEM part Johnson/Evinrude 772681 and sits on the tank side of the fuel line connection, threading into the fuel tank fitting and accepting the hose-side female connector.
The 1/4" NPT thread is a standard size across a wide range of OMC-powered outboards, making this a go-to replacement for aging or cracked tank connectors on Johnson and Evinrude motors. If the original fitting is leaking, brittle, or just due for replacement during a fuel system service, this is the part for the tank end of that connection.
It crosses with Sierra 18-8056 for those comparing across suppliers or sourcing from multiple distributors.
Replaces OEM:Johnson/Evinrude 772681
Cross References:Sierra: 18-8056
Normalized SKU: 2205110UPC Code: 840080477381
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Male Tank 1/4" NPT #22-05109
$8.91
$10.64
EMP 22-05109 Hose and Tank Fittings
The EMP 22-05109 is a male fuel tank connector with 1/4" NPT threads, designed as a Mercury OEM-style replacement for outboard fuel tank applications. This is the tank-side fitting in a portable or built-in fuel system, threading into the female-threaded port on the fuel tank and providing the male quick-disconnect end that the engine-side fuel line connector snaps onto.
The 1/4" NPT thread is a tapered pipe thread standard across a wide range of Mercury outboard fuel tank fittings. NPT threads seal on the taper of the threads themselves rather than on a gasket or O-ring, so applying thread sealant tape or a marine-grade pipe thread compound to the male threads before installation is the right move for a leak-free connection. Hand-tighten first, then snug with a wrench. NPT fittings do not need to be torqued aggressively to seal.
This connector is used in portable tank setups and built-in tank installations where the standard Mercury 1/4" NPT quick-disconnect configuration is in place. If your existing tank connector has cracked, stripped threads, or a damaged quick-disconnect seat that no longer holds the fuel line securely, this is the direct replacement.
It crosses directly with the following part number:
Moeller: 033477-10
A fuel connector that does not seat the fuel line firmly or leaks at the tank port is not something to run with. Even a small fuel leak at the tank fitting is a fire and safety hazard on the water. If the connector is suspect, replace it before the next trip out.
Normalized SKU: 2205109UPC Code: 840080477367
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.