00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Marpac
Marpac Hose Barb Male 3/8" NPT x 5/8" Hose #7-0310
$3.52
$4.14
Marpac 7-0310 Hose and Tank FittingsMarpac Hose Barb Male 3/8" NPT x 5/8" Hose #7-0310Normalized SKU: 70310UPC Code: 787766703108
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Marpac
Marpac Bulkhead Adapter 3/8" Barb #7-0306
$9.55
$11.40
Marpac 7-0306 Hose and Tank FittingsMarpac Bulkhead Adapter 3/8" Barb #7-0306Normalized SKU: 70306UPC Code: 787766703061
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Elbow 90-Degree 3/8" Barb x 1/4" NPT #22-01872
$8.63
$10.30
EMP 22-01872 Hose and Tank FittingsThis product replaces:840080481029, 18-1380, 18-1380-9Normalized SKU: 2201872UPC Code: 840080481029
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Moeller
Moeller Aluminum Hose Barb 1/2" NPT x 3/8" #302034
$9.58
$11.43
Moeller 302034 Hose and Tank FittingsMoeller Aluminum Hose Barb 1/2" NPT x 3/8" #302034Normalized SKU: 302034UPC Code: 808282397319
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Hose Barb 46089 x 3/8" #22-08103
$9.75
$11.64
EMP 22-08103 Hose and Tank FittingsThis product replaces:840080495996, 18-1388-9, 18-1388This product replaces:840080495996, 18-1388-9, 18-1388Normalized SKU: 2208103UPC Code: 840080495996
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP 90-Degree Elbow 1/4" #22-08102
$9.28
$11.08
EMP 22-08102 Hose and Tank FittingsThis product replaces:840080411507Normalized SKU: 2208102UPC Code: 840080411507
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP 90-Degree Elbow 1/4" #22-08099
$7.02
$8.26
EMP 22-08099 Hose and Tank Fittings
The EMP 22-08099 is a 90-degree brass elbow fitting with a 1/4" female NPT inlet and a 1/4" male NPT outlet. It replaces Yamaha OEM part ABA-FBARB-90-DG and is used where a fuel or fluid line needs to make a clean right-angle turn without kinking the hose or fighting a tight bend radius.
Brass construction makes it a solid choice for marine fuel system use, holding up well against fuel exposure and the general abuse that comes with life on the water. The 1/4" NPT thread on both ends is a standard size that fits a wide range of Yamaha outboard fuel system ports and fittings.
If you're routing a fuel line in a tight engine compartment, replacing a corroded elbow, or just need a reliable 90-degree transition between two 1/4" NPT connections, this fitting handles it cleanly. It crosses with Sierra 18-8040 for those verifying fitment across suppliers.
Replaces OEM:Yamaha ABA-FBARB-90-DG
Cross References:Sierra: 18-8040
Normalized SKU: 2208099UPC Code: 840080431833
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP 1/8" NPT x 1/4" Brass Elbow #22-08093
$9.75
$11.64
EMP 22-08093 Hose and Tank Fittings
The EMP 22-08093 is a brass reducing elbow fitting with a 1/4" NPT end and a 1/8" NPT end, allowing you to connect a 1/4" NPT line or port to a 1/8" NPT port at a 90-degree angle. It is a universal fitting used across a wide range of marine engine fuel and fluid system applications where a right-angle reducing connection is needed.
Brass construction holds up well in marine fuel system environments, resisting corrosion from fuel exposure and the general moisture that comes with life on the water. The 90-degree angle makes it useful in tight engine compartments where a straight fitting would put too much stress on the hose or line.
Common uses include connecting fuel system components, vacuum lines, or fluid ports where a size reduction and a direction change are needed in the same fitting. It crosses with Sierra 18-8046 for those verifying fitment across suppliers.
Cross References:Sierra: 18-8046
Normalized SKU: 2208093UPC Code: 840080442655
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Plug Aluminum 3/8" NPT #22-05309
$2.13
$2.50
EMP 22-05309 Hose and Tank Fittings
The EMP 22-05309 is a 3/8" NPT aluminum pipe plug, a universal fitting used to cap off open 3/8" NPT threaded ports in marine fuel systems, cooling systems, and engine blocks. It is not application-specific to a single OEM and works across a wide range of outboard, inboard, and sterndrive setups wherever a 3/8" NPT port needs to be sealed.
Aluminum construction makes it a practical choice for marine use, holding up well against fuel and coolant exposure without the corrosion concerns that come with steel plugs in a saltwater or freshwater environment. The 3/8" NPT thread is one of the most common pipe thread sizes in marine engine applications, so this plug sees use in everything from blocking off unused fuel system ports to capping coolant passages during engine service.
It is the kind of fitting that is worth keeping a few of on the shelf. Whether you are doing a fuel system modification, sealing off a port during a repair, or just need a clean cap for an unused threaded opening, this plug handles it without any fuss.
Normalized SKU: 2205309UPC Code: 840080477657
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Barb Hose Aluminum & 3/8" x 3/8" #22-05308
$2.64
$3.10
EMP 22-05308 Hose and Tank Fittings
The EMP 22-05308 is an aluminum male hose barb fitting with a 3/8" NPT threaded end and a 3/8" hose barb end. It is a universal fitting used across a wide range of marine fuel system, cooling system, and fluid line applications wherever a threaded port needs to transition to a hose run of the same size.
The 3/8" NPT thread screws into a standard threaded port on a tank, pump, manifold, or engine component, while the 3/8" barb accepts standard 3/8" marine hose. Both ends are the same size, so there is no reduction involved, making this a straightforward straight-through adapter from threaded to barbed connection.
Aluminum construction holds up well in marine fuel and coolant environments, resisting corrosion better than steel in both freshwater and saltwater applications. The 3/8" NPT thread and 3/8" hose barb combination is one of the most common sizes in marine fuel system rigging, so this fitting covers a broad range of outboard, inboard, and sterndrive setups.
It crosses with Moeller 033443-10 for those verifying fitment across suppliers.
Cross References:Moeller: 033443-10
Normalized SKU: 2205308UPC Code: 840080477633
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Splice Hose Double Barb 3/8" #22-05307
$4.17
$4.90
EMP 22-05307 Hose and Tank Fittings
The EMP 22-05307 is a double barb hose splice fitting for 3/8 inch inner diameter hose. The male-by-male barb configuration makes it a straightforward solution for joining two sections of 3/8 inch hose, whether you're repairing a fuel line, extending a run, or routing around an obstacle. It's a universal fit, so it works across a wide range of marine fuel and fluid system applications.
Fitting specifications:
Hose I.D.: 3/8 inch
Connection type: Hose barb x hose barb (male x male)
Application: Universal
Also crosses with Moeller 033213-10.
Normalized SKU: 2205307UPC Code: 840080477626
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Splice Hose Double Barb 5/16" #22-05306
$4.17
$4.90
EMP 22-05306 Hose and Tank Fittings
The EMP 22-05306 is a 5/16" double hose barb splice fitting, designed to join two sections of 5/16" inner diameter hose in a straight inline connection. It is a universal fitting with a male barb on each end, making it a clean and simple solution for splicing a fuel line, extending a hose run, or repairing a section of damaged hose without replacing the entire line.
The 5/16" inner diameter is one of the most common hose sizes in outboard fuel systems, so this splice sees regular use across a wide range of marine applications. Both barbed ends accept standard 5/16" hose and are designed to hold securely with hose clamps for a leak-free connection at each joint.
Whether you are making a field repair on a fuel line or routing a new hose run that needs a mid-line connection, this fitting handles it cleanly. It crosses with Moeller 33212-10 for those verifying fitment across suppliers.
Cross References:Moeller: 33212-10
Normalized SKU: 2205306UPC Code: 840080477602
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Barb Hose 1/4" NPT x 5/16" #22-05304
$4.27
$5.02
EMP 22-05304 Hose and Tank Fittings
The EMP 22-05304 is a male hose barb fitting with a 1/4" NPT thread on one end and a 5/16" hose barb on the other. It is a direct replacement for Mercury 22-63187 and Johnson/Evinrude 173311, covering OEM fuel system fittings from both brands.
The 1/4" NPT thread side connects to the fuel system component, while the 5/16" barb side accepts standard 5/16" fuel hose. Getting the right barb size matters for a leak-free connection, and this one is spec'd to match the original Mercury and Johnson/Evinrude fitment exactly.
It also crosses with Sierra 18-8055 and Moeller 33430-10 if you are sourcing by either of those part numbers.
Normalized SKU: 2205304UPC Code: 840080477589
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Hose Barb Male 1/4" NPT x 1/4" #22-05303
$5.90
$6.94
EMP 22-05303 Hose and Tank Fittings
The EMP 22-05303 is a male hose barb fitting with a 1/4" NPT threaded end and a 1/4" hose barb end. It's a universal fitting, meaning it's not application-specific to a single OEM but rather a standard hardware piece used across a wide range of marine fuel system builds, repairs, and custom line routing.
The 1/4" NPT thread screws into a threaded port on a tank, pump, or component, while the 1/4" barb accepts standard 1/4" fuel line hose. It's the kind of fitting that comes in handy when you're routing a new fuel line, replacing a corroded barb, or adapting between a threaded fitting and a hose run.
It crosses with Sierra 18-8042 and Moeller 33401-10, so if you're comparing across suppliers or verifying the spec against a known part number, those are your reference points.
Cross References:Sierra: 18-8042Moeller: 33401-10
Normalized SKU: 2205303UPC Code: 840080477794
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Hose Barb Male 1/8" NPT x 3/8" #22-05302
$6.51
$7.66
EMP 22-05302 Hose and Tank FittingsEMP Hose Barb Male 1/8" NPT x 3/8" #22-05302Normalized SKU: 2205302UPC Code: 840080477787
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Female 3/8" Hose #22-05123
$8.04
$9.46
EMP 22-05123 Hose and Tank Fittings
The EMP 22-05123 is a female fuel connector with a 3/8" hose barb, designed as a direct replacement for Mercury and Yamaha outboard fuel systems. It sits on the hose side of the fuel line and mates directly with the EMP 22-05121 male tank connector, making the two a natural pairing for a complete connector replacement.
The 3/8" hose barb fits standard marine fuel line and provides a secure connection at the engine end of the fuel system. It replaces Mercury 22-13563T and Yamaha 6E5-24305-06-00, covering a solid range of Mercury and Yamaha outboard applications where this style of quick-connect fuel fitting is used.
If the original connector is cracking, leaking, or just worn from years of fuel exposure, this is a straightforward swap that gets the fuel line back in proper working order. It also crosses with several well-known aftermarket options for easy comparison.
Replaces OEM:Mercury 22-13563TYamaha 6E5-24305-06-00
Cross References:Sierra: 18-80415Attwood: 8896LP6Moeller: 033484-10Scepter: 05815
Normalized SKU: 2205123UPC Code: 840080477565
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Female 5/16" Hose #22-05122
$8.04
$9.46
EMP 22-05122 Hose and Tank Fittings
The EMP 22-05122 is a female fuel connector with a 5/16" hose barb, built as a direct replacement for Mercury OEM part 22-13563T. It is designed to mate with the EMP 22-05121 male tank connector, so if you are building out or replacing a complete Mercury fuel line connection, these two work together as a matched pair.
The 5/16" hose barb is the standard size for Mercury outboard fuel line connections, making this a straightforward swap when your original connector is worn, cracked, or leaking.
It also crosses with Sierra 18-8085, Attwood 88FHY516-6, Moeller 033471-10, and Septor 05813, giving you solid cross-reference coverage across the major aftermarket brands.
Normalized SKU: 2205122UPC Code: 840080477541
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Male Tank 1/4" NPT #22-05121
$9.66
$11.53
EMP 22-05121 Hose and Tank Fittings
The EMP 22-05121 is a male fuel tank connector with 1/4" NPT threads, designed as a direct replacement for Yamaha OEM part ABA-FCONN-CT-OR. It pairs with EMP connectors 22-05122 and 22-05123, so building out a complete fuel line connection is simple when you need the full set.
The 1/4" NPT thread size is a standard fit across a wide range of Yamaha outboard fuel systems, and the connector is built to handle the demands of a marine fuel environment without fuss.
Also crosses with Sierra 18-8077-1, giving you a couple of reliable reference points if you are sourcing by cross-reference.
Normalized SKU: 2205121UPC Code: 840080477527
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Male Tank 1/4" NPT Chrysler & Force #22-05118
$8.63
$10.30
EMP 22-05118 Hose and Tank Fittings
This is a male tank-side fuel connector with a 1/4" NPT thread, replacing Chrysler and Force OEM part number F213238T2. It serves as the tank adaptor for Chrysler, Force, and Suzuki (small) applications and mates with the female engine-side connector EMP 22-05119.
Compatible applications include:
All Chrysler and Force outboards (1992 and prior)
9.9/15/25 HP (1997 and prior)
5 HP (1993 and later)
Also crosses with the following aftermarket part numbers:
Sierra: 18-8071
Attwood: 14509-6
Moeller: 033461-10
Normalized SKU: 2205118UPC Code: 840080477459
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
EMP
EMP Fuel Connector Female 3/8" Hose #22-05117
$8.63
$10.30
EMP 22-05117 Hose and Tank Fittings
The EMP 22-05117 is a female fuel connector for 3/8" hose, designed as a direct replacement for Mercury's old bayonet-style fuel connector. If you're working on an older Mercury outboard and the original bayonet-style connector has seen better days, this is the part that gets you back on the water without a trip to the dealership.
The 3/8" hose barb fits the bayonet-style fuel line connection found on older Mercury engines. It's a straightforward swap that restores a clean, leak-free fuel connection between your portable tank and the motor.
This connector crosses with several well-known aftermarket sources: Sierra 18-8083, Attwood 14534-6, Moeller 033418-10, and Septor 09476.
OEM: Mercury
Normalized SKU: 2205117UPC Code: 840080477732
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.