Seasense 50023765 Courtesy LightsSeasense LED Light Bright Light Slim #50023765Normalized SKU: 50023765UPC Code: 737765237654

Seasense 50023632 Courtesy LightsSeasense LED Strip Light White Flush Mount #50023632Normalized SKU: 50023632UPC Code: 737765236329

Seasense 50023637 Courtesy LightsSeasense LED Step Light White #50023637Normalized SKU: 50023637UPC Code: 737765236374

Seasense 50023621 Courtesy LightsSeasense Stainless LED Light Red #50023621Normalized SKU: 50023621UPC Code: 737765236213

Seasense 50023517 Courtesy LightsSeasense LED Courtesy Light Red #50023517Normalized SKU: 50023517UPC Code: 737765235179

Seasense 50023506 Courtesy LightsSeasense LED Courtesy Light Red #50023506Normalized SKU: 50023506UPC Code: 737765235063

Seasense 50023502 Courtesy LightsSeasense LED Courtesy Light Red #50023502Normalized SKU: 50023502UPC Code: 737765235025

Seasense 50023445 Courtesy LightsSeasense LED Utility Light White #50023445Normalized SKU: 50023445UPC Code: 737765234455

Seasense 50023485 Courtesy LightsSeasense LED Mini Ceiling Light White #50023485Normalized SKU: 50023485UPC Code: 737765234851

T-H Marine LEDBW-82-2-W-DP Courtesy Lights The T-H Marine LEDBW-82-2-W-DP is the white version of the Blue Water LED Extreme Pro Deck Light, a surface-mount LED courtesy light built for bass boats, pontoons, and fishing rigs that need reliable, low-draw deck illumination. It puts out 450 lumens with a 150-degree dispersion angle, which is wide enough to light a large section of deck without creating a harsh hot spot directly underfoot. Power draw is just 4.5W, and the light runs on any 9-30V DC source, making it compatible with both 12V and 24V electrical systems without any additional wiring adapters. That kind of voltage range also means it handles the real-world fluctuations in a marine electrical system without flickering or brownout when the engine is under load. The housing is waterproof aluminum, which dissipates heat better than plastic and holds up to spray, rain, and the general abuse of life on the water. Multiple mounting options are included, so you can surface-mount it flush to the deck or recess it, depending on your setup. This is a direct fit for most standard deck light cutouts and works equally well as a new install or a replacement for a failing incandescent or older LED fixture. Specs Aluminum housing 2.8" X 1.5" IP68 waterproof 150-degree light dispersion angle 4ft Wire Lead Mounting bases for straight and curved surfaces are included Stainless steel mounting hardware included Voltage - 9-30 VDC Color Options - Red, White, Blue, Green, Amber Extreme Pro Deck Light Single LED Includes: 1 - Extreme Pro Blue Water LED™ Deck Light 1 - Flat surface mounting pad 1 - Curved surface mounting pad 2 - Machine mounting screws 2 - Self-tapping mounting screws 2 - Flat washers Normalized SKU: LEDBW822WDPUPC Code: 853910005340

T-H Marine LEDBW-82-2-R-DP Courtesy Lights The T-H Marine LEDBW-82-2-R-DP is the red version of the Blue Water LED Extreme Pro Deck Light, a surface-mount LED courtesy light designed for bass boats, fishing rigs, and pontoons. Red deck lighting is a practical choice for night fishing because red light preserves your natural night vision far better than white light, letting you move around the deck, retie, or unhook a fish without killing your eyes every time you look down. Output is 450 lumens with a 150-degree dispersion angle, giving you broad, even coverage across the deck surface without a concentrated hot spot. Power draw is 4.5W from any 9-30V DC source, so it runs cleanly on both 12V and 24V systems and handles the voltage swings that come with running outboard without flickering or dropping out. The housing is waterproof aluminum, which manages heat better than plastic and holds up to spray, rain, and saltwater exposure without corroding or fading. Multiple mounting options are included for surface or recessed installs, and the footprint fits most standard deck light cutouts. Whether you are replacing a worn fixture or adding red lighting to a new build, the LEDBW-82-2-R-DP is a straightforward, durable option that pulls very little from your battery. Specs Aluminum housing 2.8" X 1.5" IP68 waterproof 150-degree light dispersion angle 4ft Wire Lead Mounting bases for straight and curved surfaces are included Stainless steel mounting hardware included Voltage - 9-30 VDC Color Options - Red, White, Blue, Green, Amber Extreme Pro Deck Light Single LED Includes: 1 - Extreme Pro Blue Water LED™ Deck Light 1 - Flat surface mounting pad 1 - Curved surface mounting pad 2 - Machine mounting screws 2 - Self-tapping mounting screws 2 - Flat washers Normalized SKU: LEDBW822RDPUPC Code: 853910005395

T-H Marine LEDBW-82-2-G-DP Courtesy Lights The T-H Marine LEDBW-82-2-G-DP is the green version of the Blue Water LED Extreme Pro Deck Light, a compact, high-output LED courtesy light built for bass boats, fishing rigs, and pontoons. Green is a popular choice for underwater and above-water fish attraction lighting, and it works just as well as a deck courtesy light for anglers who want a consistent color scheme across their rig. The light measures 2.8 in. x 1.5 in. and puts out 450 lumens at a 150-degree dispersion angle, covering a wide section of deck with even light rather than a narrow beam. Power draw is 4.5W from a 9-30V DC source, compatible with both 12V and 24V systems. The unit is IP68-rated waterproof, which is a full submersion rating, so spray and rain are not a concern. The aluminum housing handles heat dissipation better than plastic and holds up to corrosion in both fresh and saltwater environments. Each kit includes the deck light, a flat surface mounting pad, a curved surface mounting pad, two machine screws, two self-tapping screws, and two flat washers. The 4 ft. wire lead gives you enough slack to route cleanly to most deck wiring locations without needing an extension. The light is also dimmable, which is a useful feature when you want ambient light on the deck without lighting up the whole boat at night. Extreme Pro Deck Light Single LED Includes: 1 - Extreme Pro Blue Water LED™ Deck Light 1 - Flat surface mounting pad 1 - Curved surface mounting pad 2 - Machine mounting screws 2 - Self-tapping mounting screws 2 - Flat washers Specs Aluminum housing 2.8" X 1.5" IP68 waterproof 150-degree light dispersion angle 4ft Wire Lead Mounting bases for straight and curved surfaces are included Stainless steel mounting hardware included Voltage - 9-30 VDC Color Options - Red, White, Blue, Green, Amber Normalized SKU: LEDBW822GDPUPC Code: 733572196979

T-H Marine LEDBW-82-2-B-DP Courtesy Lights The T-H Marine LEDBW-82-2-B-DP is the green version of the Blue Water LED Extreme Pro Deck Light, a compact, high-output LED courtesy light built for bass boats, fishing rigs, and pontoons. Green is a popular choice for underwater and above-water fish attraction lighting, and it works just as well as a deck courtesy light for anglers who want a consistent color scheme across their rig. The light measures 2.8 in. x 1.5 in. and puts out 450 lumens at a 150-degree dispersion angle, covering a wide section of deck with even light rather than a narrow beam. Power draw is 4.5W from a 9-30V DC source, compatible with both 12V and 24V systems. The unit is IP68-rated waterproof, which is a full submersion rating, so spray and rain are not a concern. The aluminum housing handles heat dissipation better than plastic and holds up to corrosion in both fresh and saltwater environments. Each kit includes the deck light, a flat surface mounting pad, a curved surface mounting pad, two machine screws, two self-tapping screws, and two flat washers. The 4 ft. wire lead gives you enough slack to route cleanly to most deck wiring locations without needing an extension. The light is also dimmable, which is a useful feature when you want ambient light on the deck without lighting up the whole boat at night. Extreme Pro Deck Light Single LED Includes: 1 - Extreme Pro Blue Water LED™ Deck Light 1 - Flat surface mounting pad 1 - Curved surface mounting pad 2 - Machine mounting screws 2 - Self-tapping mounting screws 2 - Flat washers Specs Aluminum housing 2.8" X 1.5" IP68 waterproof 150-degree light dispersion angle 4ft Wire Lead Mounting bases for straight and curved surfaces are included Stainless steel mounting hardware included Voltage - 9-30 VDC Color Options - Red, White, Blue, Green, Amber Normalized SKU: LEDBW822BDPUPC Code: 853910005364

T-H Marine LEDBW-81-2-W-DP Courtesy Lights The T-H Marine LEDBW-81-2-W-DP is the white version of the Blue Water LED Extreme Pro X2 Motorglow Kit, a two-light LED set built specifically for transom and motor jackplate mounting on bass boats and fishing rigs. Where the single-light deck version covers one spot, the X2 kit gives you a matched pair for symmetrical placement on either side of the motor or across the transom, which makes a noticeable difference in how the back of the boat looks on the water at night. Each light measures 2.8 in. x 1.5 in. and runs on 9-30V DC, so both 12V and 24V systems are covered without any additional hardware. The lights are IP68-rated waterproof, meaning they are rated for continuous submersion, not just splash resistance. Aluminum housings keep heat in check and resist corrosion in both fresh and saltwater. Each light has a 4 ft. wire lead and a 150-degree dispersion angle for broad, even output rather than a narrow focused beam. The kit includes two lights, two flat surface mounting pads, two curved surface mounting pads, four machine screws, four self-tapping screws, and four flat washers. Both flat and curved mounting bases are included, so you can mount directly to a flat transom surface or conform to a curved jackplate without needing additional hardware. Backed by a lifetime warranty. Available in red, white, blue, green, and amber. This listing is for the white version. Extreme Pro X2 Motorglow LED Kit includes: 2 - Extreme Pro Blue Water LED™ Light 2 - Flat surface mounting pad 2 - Curved surface mounting pad 4 - Machine mounting screws 4 - Self-tapping mounting screws 4 - Flat washers Specs Aluminum housing 2.8" X 1.5" IP68 waterproof 150-degree light dispersion angle 4ft Wire Lead Mounting bases for straight and curved surfaces are included Stainless steel mounting hardware included Voltage - 9-30 VDC Color Options - Red, White, Blue, Green, Amber Normalized SKU: LEDBW812WDPUPC Code: 853910005623

T-H Marine LEDBW-81-2-R-DP Courtesy Lights The T-H Marine LEDBW-81-2-R-DP is the white version of the Blue Water LED Extreme Pro X2 Motorglow Kit, a two-light LED set built specifically for transom and motor jackplate mounting on bass boats and fishing rigs. Where the single-light deck version covers one spot, the X2 kit gives you a matched pair for symmetrical placement on either side of the motor or across the transom, which makes a noticeable difference in how the back of the boat looks on the water at night. Each light measures 2.8 in. x 1.5 in. and runs on 9-30V DC, so both 12V and 24V systems are covered without any additional hardware. The lights are IP68-rated waterproof, meaning they are rated for continuous submersion, not just splash resistance. Aluminum housings keep heat in check and resist corrosion in both fresh and saltwater. Each light has a 4 ft. wire lead and a 150-degree dispersion angle for broad, even output rather than a narrow focused beam. The kit includes two lights, two flat surface mounting pads, two curved surface mounting pads, four machine screws, four self-tapping screws, and four flat washers. Both flat and curved mounting bases are included, so you can mount directly to a flat transom surface or conform to a curved jackplate without needing additional hardware. Backed by a lifetime warranty. Available in red, white, blue, green, and amber. This listing is for the white version. Extreme Pro X2 Motorglow LED Kit includes: 2 - Extreme Pro Blue Water LED™ Light 2 - Flat surface mounting pad 2 - Curved surface mounting pad 4 - Machine mounting screws 4 - Self-tapping mounting screws 4 - Flat washers Specs Aluminum housing 2.8" X 1.5" IP68 waterproof 150-degree light dispersion angle 4ft Wire Lead Mounting bases for straight and curved surfaces are included Stainless steel mounting hardware included Voltage - 9-30 VDC Color Options - Red, White, Blue, Green, Amber Normalized SKU: LEDBW812RDPUPC Code: 853910005616

T-H Marine LEDBW-81-2-B-DP Courtesy Lights The T-H Marine LEDBW-81-2-B-DP is the white version of the Blue Water LED Extreme Pro X2 Motorglow Kit, a two-light LED set built specifically for transom and motor jackplate mounting on bass boats and fishing rigs. Where the single-light deck version covers one spot, the X2 kit gives you a matched pair for symmetrical placement on either side of the motor or across the transom, which makes a noticeable difference in how the back of the boat looks on the water at night. Each light measures 2.8 in. x 1.5 in. and runs on 9-30V DC, so both 12V and 24V systems are covered without any additional hardware. The lights are IP68-rated waterproof, meaning they are rated for continuous submersion, not just splash resistance. Aluminum housings keep heat in check and resist corrosion in both fresh and saltwater. Each light has a 4 ft. wire lead and a 150-degree dispersion angle for broad, even output rather than a narrow focused beam. The kit includes two lights, two flat surface mounting pads, two curved surface mounting pads, four machine screws, four self-tapping screws, and four flat washers. Both flat and curved mounting bases are included, so you can mount directly to a flat transom surface or conform to a curved jackplate without needing additional hardware. Backed by a lifetime warranty. Available in red, white, blue, green, and amber. This listing is for the white version. Extreme Pro X2 Motorglow LED Kit includes: 2 - Extreme Pro Blue Water LED™ Light 2 - Flat surface mounting pad 2 - Curved surface mounting pad 4 - Machine mounting screws 4 - Self-tapping mounting screws 4 - Flat washers Specs Aluminum housing 2.8" X 1.5" IP68 waterproof 150-degree light dispersion angle 4ft Wire Lead Mounting bases for straight and curved surfaces are included Stainless steel mounting hardware included Voltage - 9-30 VDC Color Options - Red, White, Blue, Green, Amber Normalized SKU: LEDBW812BDPUPC Code: 853910005593

T-H Marine LEDBW-80-2-W-DP Courtesy Lights The T-H Marine LEDBW-80-2-W-DP is the white version of the Blue Water LED Extreme Pro X6 Deck Light Kit, a six-light LED system designed to fully illuminate the deck of a bass boat or fishing rig from bow to stern. Six lights at 450 lumens each put a combined 2,700 lumens across your deck at a 150-degree dispersion angle per fixture, which is enough to work comfortably in the dark without washing out your night vision or lighting up the whole cove. Each light measures 2.8 in. x 1.5 in. and draws just 4.5W, so the full six-light kit pulls only 27W total from a 9-30V DC source. That is a very manageable draw for a 12V or 24V system running electronics, a trolling motor, and a livewell pump at the same time. Every light is IP68-rated waterproof, rated for continuous submersion, and housed in aluminum for better heat dissipation and corrosion resistance compared to plastic alternatives. Each light includes a 4 ft. wire lead, a flat surface mounting pad, a curved surface mounting pad, two machine screws, two self-tapping screws, and two flat washers, all multiplied across six units in this kit. The included mounting bases handle both flat and curved surfaces, so placement on a contoured deck or gunnel does not require additional hardware. The lights are also dimmable, giving you control over the output level depending on conditions. Available in red, white, blue, green, and amber. This listing is for the white version. Extreme Pro Deck X6 Light LED Kit includes 6 - Extreme Pro Blue Water LED™ Deck Light 6 - Flat surface mounting pad 6 - Curved surface mounting pad 12 - Machine mounting screws 12 - Self-tapping mounting screws 12 - Flat washers Specs Aluminum housing 2.8" X 1.5" IP68 waterproof 150-degree light dispersion angle 4ft wire lead Includes mounting bases for straight and curved surfaces Includes stainless steel mounting hardware Voltage - 9-30 VDC Color Options - Red, White, Blue, Green, Amber Normalized SKU: LEDBW802WDPUPC Code: 853910005678

T-H Marine LEDBW-80-2-R-DP Courtesy Lights The T-H Marine LEDBW-80-2-R-DP is the white version of the Blue Water LED Extreme Pro X6 Deck Light Kit, a six-light LED system designed to fully illuminate the deck of a bass boat or fishing rig from bow to stern. Six lights at 450 lumens each put a combined 2,700 lumens across your deck at a 150-degree dispersion angle per fixture, which is enough to work comfortably in the dark without washing out your night vision or lighting up the whole cove. Each light measures 2.8 in. x 1.5 in. and draws just 4.5W, so the full six-light kit pulls only 27W total from a 9-30V DC source. That is a very manageable draw for a 12V or 24V system running electronics, a trolling motor, and a livewell pump at the same time. Every light is IP68-rated waterproof, rated for continuous submersion, and housed in aluminum for better heat dissipation and corrosion resistance compared to plastic alternatives. Each light includes a 4 ft. wire lead, a flat surface mounting pad, a curved surface mounting pad, two machine screws, two self-tapping screws, and two flat washers, all multiplied across six units in this kit. The included mounting bases handle both flat and curved surfaces, so placement on a contoured deck or gunnel does not require additional hardware. The lights are also dimmable, giving you control over the output level depending on conditions. Available in red, white, blue, green, and amber. This listing is for the white version. Extreme Pro Deck X6 Light LED Kit includes 6 - Extreme Pro Blue Water LED™ Deck Light 6 - Flat surface mounting pad 6 - Curved surface mounting pad 12 - Machine mounting screws 12 - Self-tapping mounting screws 12 - Flat washers Specs Aluminum housing 2.8" X 1.5" IP68 waterproof 150-degree light dispersion angle 4ft wire lead Includes mounting bases for straight and curved surfaces Includes stainless steel mounting hardware Voltage - 9-30 VDC Color Options - Red, White, Blue, Green, Amber Normalized SKU: LEDBW802RDPUPC Code: 853910005661

T-H Marine LEDBW-80-2-B-DP Courtesy Lights The T-H Marine LEDBW-80-2-B-DP is the white version of the Blue Water LED Extreme Pro X6 Deck Light Kit, a six-light LED system designed to fully illuminate the deck of a bass boat or fishing rig from bow to stern. Six lights at 450 lumens each put a combined 2,700 lumens across your deck at a 150-degree dispersion angle per fixture, which is enough to work comfortably in the dark without washing out your night vision or lighting up the whole cove. Each light measures 2.8 in. x 1.5 in. and draws just 4.5W, so the full six-light kit pulls only 27W total from a 9-30V DC source. That is a very manageable draw for a 12V or 24V system running electronics, a trolling motor, and a livewell pump at the same time. Every light is IP68-rated waterproof, rated for continuous submersion, and housed in aluminum for better heat dissipation and corrosion resistance compared to plastic alternatives. Each light includes a 4 ft. wire lead, a flat surface mounting pad, a curved surface mounting pad, two machine screws, two self-tapping screws, and two flat washers, all multiplied across six units in this kit. The included mounting bases handle both flat and curved surfaces, so placement on a contoured deck or gunnel does not require additional hardware. The lights are also dimmable, giving you control over the output level depending on conditions. Available in red, white, blue, green, and amber. This listing is for the white version. Extreme Pro Deck X6 Light LED Kit includes 6 - Extreme Pro Blue Water LED™ Deck Light 6 - Flat surface mounting pad 6 - Curved surface mounting pad 12 - Machine mounting screws 12 - Self-tapping mounting screws 12 - Flat washers Specs Aluminum housing 2.8" X 1.5" IP68 waterproof 150-degree light dispersion angle 4ft wire lead Includes mounting bases for straight and curved surfaces Includes stainless steel mounting hardware Voltage - 9-30 VDC Color Options - Red, White, Blue, Green, Amber Normalized SKU: LEDBW802BDPUPC Code: 853910005647

T-H Marine LEDBW-106-R-DP Courtesy Lights The T-H Marine LEDBW-106-R-DP is the red version of the Blue Water LED Night Blaster Deck Lighting Kit, a LED strip-based deck lighting system built for bass boats that want full front and rear deck coverage in one package. Unlike puck-style deck lights, the Night Blaster uses flexible LED strip sections that run along the deck edges and compartment rails, giving you a continuous line of light rather than individual pools. The kit includes six LED strip sections total: two 30-LED strips at 20 in. each for the front deck, two 15-LED strips at 10 in. each also for the front deck, and two additional 15-LED strips at 10 in. each for the rear deck. All strips use 3M industrial waterproof adhesive backing for a clean, no-drill install that bonds directly to the deck surface. A waterproof push-button switch is included to control the whole system from one point. The entire kit runs on 12V DC. Red is a practical color choice for night fishing since it preserves natural night vision better than white or blue, letting you move around the deck and handle fish without your eyes needing to readjust every time you look up. The strips are fully waterproof and backed by a lifetime limited warranty. Available in amber, blue, green, red, and white. Note: deck lights are intended for use while stationary. Always use only your navigational lights when running the boat at night. Specs Power: 12 Volts DC Waterproof: Yes Product Warranty: Lifetime Limited Warranty Colors: Amber, Blue, Green, Red, White Included 2 - 30 LED / 20-inch Blue Water LED™ Light Strips with 3M™ Industrial Waterproof Adhesive Backing for front deck 2 - 15 LED / 10-inch Blue Water LED™ Light Strips with 3M™ Industrial Waterproof Adhesive Backing for front deck 2 - 15 LED / 10-inch Blue Water LED™ Light Strips with 3M™ Industrial Waterproof Adhesive Backing for rear deck 1 - Waterproof push-button switch Normalized SKU: LEDBW106RDPUPC Code: 853910005043