00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
T-Spec
T-Spec 4-Position Distribution Block with Cover #VDB4
$38.09
$45.70
T-Spec VDB4 Bus BarsVDB4 4-Position Distribution Block with CoverT-Spec designed their VDB4 distribution block to handle the high-current power distribution for four (4) power sources while keeping your wiring connected securely and looking neat. You can also use this hefty little block to combine the ground wires of four (4) sources to a single grounding point. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover protects your connections from the weather. Features:
One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate lock technology
In the Box:
Distribution block with one (1) 1/0 set-screw input and four (4) 4 or 8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed on input and outputs)
Two 1/2" screws
*Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VDB4UPC Code: 086429390632
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
T-Spec
T-Spec 4-Position Battery Terminal Distribution Block #V-BATT-TML
$39.99
$46.98
Download LiteratureT-Spec V-BATT-TML Bus Bars4 Position Battery Terminal - POS/NEGThe V-BATT-TML is a four-position battery terminal that can accept up to (2) 1/0 AWG and (2) 4 AWG, down to (4) 10 AWG wires. It includes all markers and hardware to be used for the positive or negative post. Features:
Four (4) Outputs - (2) 1/0 AWG – 10 AWG plus (2) 4 AWG – 10 AWG
Compact design for simpler installation
Solid brass construction for maximum conductivity
Nickel finish for durability
Positive and Negative marker plates included
Negative post sleeve included
In the Box:
Brass battery terminal
Negative post sleeve (pre-installed)
Black "negative" marker plate (pre-installed)
Red "positive" marker plate
Two 10mm hex-socket screws
2 Rubber hole-caps
4mm Allen key
1.5mm Allen key
*Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: VBATTTMLUPC Code: 086429364411T-Spec V-BATT-TML Literature Download Product Brochure
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra Powersports
Metra Powersports 2-Way Waterproof Connector #76-0201
$17.03
$20.33
Metra Powersports 76-0201 Bus Bars2-Way Waterproof ConnectorFeatures:
Pair of wire connectors with one (1) Male and one (1) Female connector ends each
18 Gauge wire
Waterproof
*Sold as a Pair Normalized SKU: 760201UPC Code: 086429352586
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra Powersports
Metra Powersports 3-Way Waterproof Connector #76-0300
$21.99
$22.96
Metra Powersports 76-0300 Bus Bars3-Way Waterproof ConnectorFeatures:
3 Wire connector with one (1) Male and one (1) Female connector end
18 Gauge wire
Waterproof
*Sold as an Individual Normalized SKU: 760300UPC Code: 086429352593
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
BEP Marine
BEP Pro Installer Link Bar 35.5-42.5mm 5-pk #779-LB-2-B5
$34.13
$40.74
BEP Marine 779-LB-2-B5 Bus BarsPro Installer Link Bar 35.5 - 42.5mm *5-PackPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity copper and are tin plated for optimum marine electrical performance. Links can be doubled to accommodate higher loads. Normalized SKU: 779LB2B5UPC Code: 870216049281
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sea-Dog
Sea-Dog Buss Bar Stud Terminal 4-5/16"-18 #426738-1
$4.20
$4.94
Sea-Dog 426738-1 Bus Bars
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it helpful in consolidating multiple wires or feeding various circuits. They are constructed of tin-plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included). 426768 has four #8-32 screw terminals in addition to the four studs.
Tin-Plated Brass/ABS
Terminals: 4 x 5/16"-18
Max Amps: 250
Fastener Type: #10 RH
Size:
A: 8"
B: 1-1/2"
C: 1-5/8"
D: 7-1/8"
Normalized SKU: 4267381UPC Code: 035514427494
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Blue Sea System
Blue Sea Busbar 100a with Cover #2356
$42.14
$50.56
Blue Sea System 2356 Bus Bars2356 Water Resistant BusBar - 100 Amp with CoverProvides secure water-resistant bussing for harsh environments. The single side nesting design allows for wire entry from one side to maximize space.Features:
Water-resistant design with standard ring or fork type terminals allows for simple wiring with standard tools.
Accepts a wide range of wire sizes
Includes 3 wire plugs to maintain water-resistant rating if less than 4 wires are used
Nests with other Water-Resistant 100A Common BusBars and ST-Blade Water-Resistant Fuse Block for space saving wiring
Ideal for positive distribution and for the collection of negative or AC ground circuits
Insulating cover meets ABYC/USCG insulation requirements
Tin-plated copper busses and fuse clips
Includes four write-on circuit labels
Small format standard and custom labels available
Specifications:
Cover: Yes
Maximum Voltage: 300V AC/48V DC
Continuous Rating: 100A AC/100A DC
Bus Material: Tin-Plated Copper C11000
Mounting Holes: Accepts 1/4" (6mm) Screws
Terminal Screw: 4 x #8-32
Terminal Stud: 1 x #10-32
Wire Size: (1) 8 AWG to 4 AWG - Input/(4) 16 AWG to 10 AWG - Load
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 2356UPC Code: 632085023560
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Marinco Recreational Group
Marinco Bus Bar for Fuse Holder #80-712-0039-00
$40.58
$48.69
Marinco Recreational Group 80-712-0039-00 Bus BarsATC Bus Bar The ATC Negative Bus uses the BEP Contour lock system to allow it to be joined to the ATC fuse holder. Made with quality parts/materials for optimal performance and reliability. Follow manufacturer recommendations for proper fit/installation.
Contour lock
Can be joined to the ATC fuse holder
ATC bus bar replacement
Follow manufacturer guidelines for fit/installation information
Normalized SKU: 80712003900UPC Code: 843687000167
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sea-Dog
Sea-Dog Terminal Cover for 426718 Buss Bar #426719
$0.77
$0.90
Sea-Dog 426719 Bus BarsSea-Dog's Buss Bar Stud Terminal Block Cover is built from quality injection molded polystyrene. Check manufacturer recommendations to ensure a proper fit. Quick and easy to install.
Injection Molded Polystyrene
Dimensions: A: 5-3/16"B: 4-3/4"C: 1-11/16"D: 1-3/4"
Built from quality materials
Quick and easy installation
Normalized SKU: 426719UPC Code: 035514427845
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sea-Dog
Sea-Dog Terminal Cover for 426728 Buss Bar #426729
$1.87
$2.20
Sea-Dog 426729 Bus BarsSea-Dog's Buss Bar Stud Terminal Block Cover is built from quality injection molded polystyrene. Check manufacturer recommendations to ensure a proper fit. Quick and easy to install.
Injection Molded Polystyrene
Dimensions: A: 5-3/16"B: 4-3/4"C: 1-11/16"D: 1-3/4"
Built from quality materials
Quick and easy installation
Normalized SKU: 426729UPC Code: 035514427906
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Mastervolt
Mastervolt MasterBus Cable 1m #77040100
$43.32
$51.98
Mastervolt 77040100 Bus BarsMasterBus Cable - 1M Suitable for data traffic and powering peripheral equipment, this is the only cable you need for your MasterBus network. MasterBus compatible products come standard with two ports, while other equipment requires an interface.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 77040100UPC Code: 77040100
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Newmar
Newmar Bus Bar #BB2
$76.72
$95.24
Newmar BB2 Bus Bars" Ideal as a DC ground tie point or positive bus, these heavy duty, 500 amp rated bus bar assemblies feature 5/16"" studs on 1"" centers in 1/4"" thick copper bar for common connection/distribution of large wire gauges and accommodate 5/16"" ring terminals. One combination model features two 5/16"" studs and eight #8 screws, accommodating multiple size wire terminals. All bus material is nickel-plated copper. A clear insulating protective cover is provided to prevent short circuits and provide visibility of lugs. The mounting bases are keyed for interlocking and may be mated with the terminal strips (described above). Conductive parts are captured and recessed away from the mounting surface. Use #8 or #10 screws for mounting. Model Qty. of 5/16"" Studs Base Size BB-2 2 3 1/16"" x 1 1/2"" BB-2/8 2 plus 8 - #8 screws 6 1/16"" x 1 1/2"" BB-5 5 6 1/16"" x 1 1/2"" BB-8 8 9 1/16"" x 1 1/2"" "Normalized SKU: BB2
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Newmar
Newmar Bus Bar #BB8
$178.84
$227.14
Newmar BB8 Bus Bars" Ideal as a DC ground tie point or positive bus, these heavy duty, 500 amp rated bus bar assemblies feature 5/16"" studs on 1"" centers in 1/4"" thick copper bar for common connection/distribution of large wire gauges and accommodate 5/16"" ring terminals. One combination model features two 5/16"" studs and eight #8 screws, accommodating multiple size wire terminals. All bus material is nickel-plated copper. A clear insulating protective cover is provided to prevent short circuits and provide visibility of lugs. The mounting bases are keyed for interlocking and may be mated with the terminal strips (described above). Conductive parts are captured and recessed away from the mounting surface. Use #8 or #10 screws for mounting. Model Qty. of 5/16"" Studs Base Size BB-2 2 3 1/16"" x 1 1/2"" BB-2/8 2 plus 8 - #8 screws 6 1/16"" x 1 1/2"" BB-5 5 6 1/16"" x 1 1/2"" BB-8 8 9 1/16"" x 1 1/2"" "Normalized SKU: BB8
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Newmar
Newmar Buss Bar #BB-5
$141.53
$175.70
Newmar BB-5 Bus Bars" Ideal as a DC ground tie point or positive bus, these heavy duty, 500 amp rated bus bar assemblies feature 5/16"" studs on 1"" centers in 1/4"" thick copper bar for common connection/distribution of large wire gauges and accommodate 5/16"" ring terminals. One combination model features two 5/16"" studs and eight #8 screws, accommodating multiple size wire terminals. All bus material is nickel-plated copper. A clear insulating protective cover is provided to prevent short circuits and provide visibility of lugs. The mounting bases are keyed for interlocking and may be mated with the terminal strips (described above). Conductive parts are captured and recessed away from the mounting surface. Use #8 or #10 screws for mounting. Model Qty. of 5/16"" Studs Base Size BB-2 2 3 1/16"" x 1 1/2"" BB-2/8 2 plus 8 - #8 screws 6 1/16"" x 1 1/2"" BB-5 5 6 1/16"" x 1 1/2"" BB-8 8 9 1/16"" x 1 1/2"" "Normalized SKU: BB5
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Newmar
Newmar Buss Bar #BB-2/8
$126.18
$156.64
Newmar BB-2/8 Bus Bars" Ideal as a DC ground tie point or positive bus, these heavy duty, 500 amp rated bus bar assemblies feature 5/16"" studs on 1"" centers in 1/4"" thick copper bar for common connection/distribution of large wire gauges and accommodate 5/16"" ring terminals. One combination model features two 5/16"" studs and eight #8 screws, accommodating multiple size wire terminals. All bus material is nickel-plated copper. A clear insulating protective cover is provided to prevent short circuits and provide visibility of lugs. The mounting bases are keyed for interlocking and may be mated with the terminal strips (described above). Conductive parts are captured and recessed away from the mounting surface. Use #8 or #10 screws for mounting. Model Qty. of 5/16"" Studs Base Size BB-2 2 3 1/16"" x 1 1/2"" BB-2/8 2 plus 8 - #8 screws 6 1/16"" x 1 1/2"" BB-5 5 6 1/16"" x 1 1/2"" BB-8 8 9 1/16"" x 1 1/2"" "Normalized SKU: BB2/8
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sea-Dog
Sea-Dog Buss Bar 20 Screw Terminal #426724-1
$37.37
$44.60
Sea-Dog 426724-1 Bus BarsBrass tin plated on ABS plastic block. Equipped with 2 1/4" studs for main wire connection, max 48VDC, 150 amps. Uses #8-32 RH fasteners. Display packaged.Normalized SKU: 4267241UPC Code: 035514427517
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sea-Dog
Sea-Dog Buss Bar Stud 4 Terminal #426728-1
$17.07
$20.37
Sea-Dog 426728-1 Bus Bars
These Buss Bar Stud Terminal Blocks primarily route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it helpful in consolidating multiple wires or feeding various circuits. Constructed of tin-plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included). 426768 has four #8-32 screw terminals in addition to the four studs.
Tin-Plated Brass/ABS
Terminals: 4 x 1/4"-20
Max Amps: 150
Fastener Type: #10 RH
Size:
A: 6"
B: 1-1/4"
C: 1-3/8"
D: 5-3/16"
Normalized SKU: 4267281UPC Code: 035514427487
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sea-Dog
Sea-Dog Buss Bar 20 Terminal Combination #426686-1
$31.71
$37.85
Sea-Dog 426686-1 Bus BarsBrass tin plated bars on ABS plastic block. Separate buss strips allow both negative and positive connections on same block, max 48VDC, 100 amps. Uses #10 RH fasteners. Display packaged.Normalized SKU: 4266861UPC Code: 035514426008
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sea-Dog
Sea-Dog Buss Bar 10 Screw Terminal #426711-1
$21.58
$25.75
Sea-Dog 426711-1 Bus BarsBrass tin plated on ABS plastic block. Equipped with 2 #10-24 studs for main wire connection, max 48VDC, 100 amps. Uses #10 RH fasteners. Display packaged.Normalized SKU: 4267111UPC Code: 035514427463
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sea-Dog
Sea-Dog Buss Bar 4 Stud Terminal #426718-1
$16.34
$19.50
Sea-Dog 426718-1 Bus Bars
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it helpful in consolidating multiple wires or feeding various circuits. They are constructed of tin-plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included). 426768 has four #8-32 screw terminals in addition to the four studs.
Tin-Plated Brass/ABS
Terminals: 4 x #10x24
Max Amps: 100
Fastener Type: #10 RH
Size:
A: 4-3/16"
B: 7/8"
C: 7/8"
D: 3-7/16"
Normalized SKU: 4267181UPC Code: 035514427470
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.