Analytic Systems IBI2-40-200 Battery Chargers2-Bank Battery Isolator, 200A, 40VAnalytic Systems introduces the IBI (Ideal Battery Isolator) for 1, 2 and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electricalisolation between the battery banks or between a vehicle and trailer.Ideal Diode technology uses MosFet Transistors and control circuitry to replace the diode used in a traditional battery isolator and reduces the voltage drop across the isolator to a mere 160 millivolts at 200 Amps of charging current and essentially zero volts at low current, so all the power of the alternator is applied to the batteries ensuring a full recharge every time.While the Ideal Battery Isolator is designed to be used with an alternator, it can also be used to convert a single bank battery charger to a 2 or 3 bank charger or as a pure diode between a vehicle and trailer or other remote load.Features: Waterproof Expoxy Sealed Construction Easy Connection Most Efficient use of Available Alternator Output Maximize Battery Performance Three year parts and labour warranty Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 10-40 VDC Charger Output - Amps = 200 Charger Output Voltage = NONE Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: IBI240200

Analytic Systems IBI1-40-200 Battery ChargersSingle Bank Battery Isolator, 200A, 40VAnalytic Systems introduces the IBI (Ideal Battery Isolator) for 1, 2 and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electricalisolation between the battery banks or between a vehicle and trailer.Ideal Diode technology uses MosFet Transistors and control circuitry to replace the diode used in a traditional battery isolator and reduces the voltage drop across the isolator to a mere 160 millivolts at 200 Amps of charging current and essentially zero volts at low current, so all the power of the alternator is applied to the batteries ensuring a full recharge every time.While the Ideal Battery Isolator is designed to be used with an alternator, it can also be used to convert a single bank battery charger to a 2 or 3 bank charger or as a pure diode between a vehicle and trailer or other remote load.Features: Waterproof Expoxy Sealed Construction Easy Connection Most Efficient use of Available Alternator Output Maximize Battery Performance Three year parts and labour warranty Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 10-40 VDC Charger Output - Amps = 200 Charger Output Voltage = NONE Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: IBI140200

Analytic Systems IBI1-40-340 Battery ChargersSingle Bank Battery Isolator, 340A, 40VAnalytic Systems introduces the IBI (Ideal Battery Isolator) for 1, 2 and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electricalisolation between the battery banks or between a vehicle and trailer.Ideal Diode technology uses MosFet Transistors and control circuitry to replace the diode used in a traditional battery isolator and reduces the voltage drop across the isolator to a mere 160 millivolts at 200 Amps of charging current and essentially zero volts at low current, so all the power of the alternator is applied to the batteries ensuring a full recharge every time.While the Ideal Battery Isolator is designed to be used with an alternator, it can also be used to convert a single bank battery charger to a 2 or 3 bank charger or as a pure diode between a vehicle and trailer or other remote load.Features: Waterproof Expoxy Sealed Construction Easy Connection Most Efficient use of Available Alternator Output Maximize Battery Performance Three year parts and labour warranty Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 10-40 VDC Charger Output - Amps = 340 Charger Output Voltage = NONE Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: IBI140340

Analytic Systems BCA1550-12 Battery ChargersAC Charger 1-Bank 100A 12V Out/110/220V InAC Chargers are available as two-stage or two and three-stage chargers capable of charging one or two banks of 12, 16, 24, 28, 32, 36, 48, 72V (rail) or other voltage battery banks, and are designed to quickly and accurately charge and condition batteries. Normalized SKU: BCA155012

Analytic Systems BCA1505-12 Battery ChargersAC Charger 2-Bank 100A, 12V Out, 110V/220VAC InThe BCA1505 battery charger provides up to 1500 watts to charge a one or two bank battery system at 12, 24, 32, 48 or 72(rail) volts from a 110 or 220 VAC source. The batteries must share a common ground.Features include user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life.Protection include output overvoltage, battery or charger over temperature, low input voltage, overload and short circuit.Features: One or two bank charging Temperature compensation Color coded output terminals 2 or 3 stage charging profiles Can function as a power supply Visual indicators for operation and errors Military-grade extrusion ensures a high tolerance for shock and vibration Fast and accurate charging Low EMI Rugged and reliable Three year warranty (parts & labor) Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 110/220 VAC Charger Output - Amps = 100 Charger Output Voltage = 12 VDC Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: BCA150512

Analytic Systems BCA610V-110-12 Battery ChargersAC Charger 2-Bank 40A, 12V Out, 110VAC In with Digital Volt/Amp MeterThe traditional BCA610 series chargers feature 600 watts of precision charging power for 1 or 2 banks of batteries at 12, 24, 32, 36, 48 or 72(rail) volts DC. Models are available to operate from 110 or 220 volts AC at 50, 60 or 400 Hz.All models feature user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life.Features: Two or three stage charging profiles Adjustable float voltage One or two bank charging (three bank optional) Temperature compensation Low EMI Manual equalization mode Three year warranty (parts & labor) Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 110 VAC Charger Output - Amps = 40 Charger Output Voltage = 12 VDC Charger Type = NONE Charging Banks = 2 Portable = NONENormalized SKU: BCA610V11012

Analytic Systems BCA1000V-110-24 Battery ChargersAC Charger 2-Bank 40A, 24V Out, 110VAC In, with Digital Volt/Amp MeterThe traditional BCA1000 series chargers feature 1000 watts of precision charging power for 1 or 2 banks of batteries at 12, 24, 32, 36, 48 or 72(rail) volts DC. Models are available to operate from 110 or 220 volts AC at 50, 60 or 400 Hz.All models feature user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life.Features: Two or three stage charging profiles Adjustable float voltage One or two bank charging (three bank optional) Temperature compensation Low EMI Manual equalization mode Three year warranty (parts & labor) Specifications:Charging Banks = 2 Charger Type = NONE Charger Output Voltage = 24 VDC Charger Output - Amps = 40 Charger Input - Voltage = 110 VAC Battery Type = NONE Amps Per Bank = NONE Portable = NONENormalized SKU: BCA1000V11024

Download LiteratureAnalytic Systems BCA1000-110-24 Battery ChargersAC Charger 2-Bank 40A, 24V Out, 110VAC In CSA/ULThis BCA1000 COTS AC-source battery charger is designed to charge a battery at 24VDC.Internally, the single-board design incorporates a time-tested switch mode technology for unmatched efficiency and ultra-quiet operation. Additional stages of filtering on the outputs reduce conducted and radiated EMI noise to very low levels.This unit features a user-selectable 2-stage or 3-stage charging profile, and the output voltage adjusts for optimum charging. Additionally, the equalization mode and voltage temperature compensation increase the lifetime of expensive battery systems.Built for rugged duty, this unit is constructed from heavy-duty anodized extruded and billet machined aluminum with O-ring seals and all stainless-steel fasteners.Reliability features of this product line include LED status indicators, over-temperature shutdown, current limiting, reverse polarity battery connection protection, output short circuit shutdown with automatic recovery, and output over-voltage protection.Features: Adjustable charging voltage Single or two-bank charging Ultra-quiet low EMI operation Bright LED indicators Equalize mode functionality Rugged and reliable Specifications:Input: Nominal Voltage: 110 VAC  Actual Voltage: 90-133 VAC Frequency: 45-65 Input Amps (Max): 13 A  Input Fuse (Slow blow): MDA-20 Output: Nominal Voltage: 24 VDC Float Voltage: 27.2 VDC Absorption Voltage: 28.8 VDC Charging Amps: 40 A  Output Fuses (parallel): 2x ATC-30  Absorption to Float Switch: 6 Amps Output Overvoltage Protection: 32 ± 1V  Temperature Compensation: -60mV/°C  Equalize Voltage: 31.0 VDC  Recommended Battery Size (Amp-hours): 160-240  Supported no. of Battery Banks: Charges up to two connected battery banks Output Volt. Adjust: +/- 1.0 V Charging Stages (Selectable): 2 Stage (CC-Float) or 3 Stage (CC-Absorption-Float), User-selectable Output Ripple & Noise: <50 mV Transient Response: <1V for 50% Surge Regulation (Line & Load): < +/- 0.5% Duty Cycle: Continuous (100% for 24 hours per day) Efficiency: >75% @ Maximum Output Mechanical: Length: 14.5 in. / 36.8 cm Width: 9.9 in. / 25.1 cm Height: 5.0 in. / 12.7 cm Clearance: 1.0 in. / 2.5 cm all around Weight: 12.0 lb. / 5.5 kg (approximate) Material and Finish: Black anodized marine-grade aluminum Fasteners: 18-8 stainless steel Input Connection: 3 m / 9.8ft 3xAWG14 power cord with NEMA 5-15 or CEE 7/VII compatible plug Output Connection: Molex 4-pin BEAU Terminal Strip Battery Temperature Sensor Connection: RJ45 ‘telephone jack’ connector Environmental & Safety: Operating Temperature: -25°C to +40°C @ maximum output. Derate linearly 2.5% per °C from +40°C Storage Temperature: -40°C to +100°C Humidity: 0 - 95% relative humidity (non-condensing) with standard conformal coating Isolation: Input-Output & Input-Case: 1500 VDC; Output-Case: 500 VDC (1500 VDC @ 48 V Out) Cooling: Two interior thermostatic cooling fans Audible Noise: 0 dB @ 1 meter when the fan operating Typical Service Life: > 10 years (87,600 hrs.) Warranty: Three Years of Parts and Labor Safety: Designed to meet UL458 & CSA 22.2.107.1 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: BCA100011024Analytic Systems BCA1000-110-24 Literature Download Quick Reference Guide

Analytic Systems BCA-1505-24 Battery ChargersAC Charger 2-Bank 55A, 24V Out, 110V InThe BCA1505 battery charger provides up to 1500 watts to charge a one or two bank battery system at 12, 24, 32, 48 or 72(rail) volts from a 110 or 220 VAC source. The batteries must share a common ground.Features include user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life.Protection include output overvoltage, battery or charger over temperature, low input voltage, overload and short circuit.Features: One or two bank charging Temperature compensation Color coded output terminals 2 or 3 stage charging profiles Can function as a power supply Visual indicators for operation and errors Military-grade extrusion ensures a high tolerance for shock and vibration Fast and accurate charging Low EMI Rugged and reliable Three year warranty (parts & labor) Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 110/220 VAC Charger Output - Amps = 60 Charger Output Voltage = 24 VDC Charger Type = NONE Charging Banks = 2 Portable = NONENormalized SKU: BCA150524

Analytic Systems BCA1000V-110-12 Battery ChargersAC Charger 2-Bank 60A, 12V Out, 110V In, with Digital Volt/Amp MeterThe traditional BCA1000 series chargers feature 1000 watts of precision charging power for 1 or 2 banks of batteries at 12, 24, 32, 36, 48 or 72(rail) volts DC. Models are available to operate from 110 or 220 volts AC at 50, 60 or 400 Hz.All models feature user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life.Features: Two or three stage charging profiles Adjustable float voltage One or two bank charging (three bank optional) Temperature compensation Low EMI Manual equalization mode Three year warranty (parts & labor) Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 110 VAC Charger Output - Amps = 60 Charger Output Voltage = 12 VDC Charger Type = NONE Charging Banks = 2 Portable = NONENormalized SKU: BCA1000V11012

Analytic Systems PWI320-24 Battery ChargersAC Power Supply 10/13A, 24V Out, 85-265V InThe PWI320 Intelligent Power Supply delivers a full 300 watts of output power for communications, control or a wide variety of other devices. It is fully Digital Signal Processor controlled and feature Universal Input Voltage from 85 to 265 VAC at 50 or 60 Hz with Active Power Factor Correction for the most efficient use of AC power.The Power Supply is preset to the same voltage as a fully charged battery of the nominal output voltage (ie. 13.6V for a 12V model, etc.). The voltage can be adjusted over a reasonable range using the front panel controls, or the PowerWizard software that is free to download from www.analyticsystems.com.Seven dual color LEDs clearly indicate output current levels as well as indicating faults with the Power Supply. Safety features include Power Supply over temperature shutdown, current limiting, short circuit protection, input under voltage shutdown and output overvoltage protection all with automatic recovery.  PWI320MW model available with MIL connectors, extra input and output filtering and sealed to IP66.Features: Digital Signal Processor controlled Universal worldwide AC input Computer programmable Simple front panel controls Easy connection to loads High Vibration Rugged Duty Dry Contact Output Fail Relay Carrying Handle Canbus / RS232 / Remote Control port Five year parts and labour warranty Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 85-265 VAC Charger Output - Amps = 10-13 Charger Output Voltage = 24 VDC Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: PWI32024

Analytic Systems PWI320-12 Battery ChargersAC Power Supply 20/25A, 12V Out, 85-265V InThe PWI320 Intelligent Power Supply delivers a full 300 watts of output power for communications, control or a wide variety of other devices. It is fully Digital Signal Processor controlled and feature Universal Input Voltage from 85 to 265 VAC at 50 or 60 Hz with Active Power Factor Correction for the most efficient use of AC power.The Power Supply is preset to the same voltage as a fully charged battery of the nominal output voltage (ie. 13.6V for a 12V model, etc.). The voltage can be adjusted over a reasonable range using the front panel controls, or the PowerWizard software that is free to download from www.analyticsystems.com.Seven dual color LEDs clearly indicate output current levels as well as indicating faults with the Power Supply. Safety features include Power Supply over temperature shutdown, current limiting, short circuit protection, input under voltage shutdown and output overvoltage protection all with automatic recovery.  PWI320MW model available with MIL connectors, extra input and output filtering and sealed to IP66Features: Digital Signal Processor controlled Universal worldwide AC input Computer programmable Simple front panel controls Easy connection to loads High Vibration Rugged Duty Dry Contact Output Fail Relay Carrying Handle Canbus / RS232 / Remote Control port Five year parts and labour warranty Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 85-265 VAC Charger Output - Amps = 20-25 Charger Output Voltage = 12 VDC Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: PWI32012

Analytic Systems IPSI2400-20-110 Battery ChargersAC Intelligent Pure Sine Wave Inverter, 2400W, 20-40V In, 110V OutDigital Signal Processor controlled high power MosFet technology creates a low voltage Sine-Wave that is fed into a compact toroidal step-up transformer to create a very clean low EMI AC output. Using the free to download ‘Power Wizard’ software, the user can select output frequency, output voltage, output frequency and low voltage shutdown parameters from any laptop through the standard micro-usb interface. Safety features include current limiting, short circuit protection, inrush protection (during connection to the DC source), overtemperature de-rating and shutdown and low input voltage warning and shutdown. An Off-Line UPS options allows external AC to be routed through the inverter for high power UPS function if the external AC fails.Features: Programmable Low Voltage Shutdown Overload Protected Short Circuit Protected DSP Controlled Programmable Frequency Over Temperature Protected Hardwire AC Output Connection Programmable Output Voltage Three year parts and labor warranty Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 110 VAC Charger Output - Amps = 20-24 Charger Output Voltage = 20-40 VDC Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: IPSI240020110

Analytic Systems VTC305-12-24 Battery ChargersNon Iso DC/DC Converter 13A, 24V Out, 11-15V InStep up a 12 VDC battery to between 13.5 and 17.0 or 24.0 and 27.5 VDC in 0.5 VDC increments (via 3 position DIP switch), or stabilize a 12 or 24 VDC power system. Safety features include reverse input protection, low input voltage alarm, low output voltage alarm, over temperature shutdown and alarm, and output overvoltage crowbar. If the input voltage exceeds the regulated output voltage, the unit simply passes the voltage through with full LC filtering and a single schottky diode drop (0.5 VDC or less). Optional features include a dry contact alarm relay output, and remote panel monitoring with On/Off control. Applications include temporarily brightening 12 volt headlights or work lights, increasing voltage into an automotive or marine ignition system for hotter spark and/or prevention of failures due to voltage drop during engine start, stabilizing 12 and 24 VDC power systems in marine, automotive or aeronautical environments and more. Features: Ultra-quiet Rugged and reliable to ensure years of safe and trouble free operation Simple operation Current limiting protection Paralleling Diodes European ROHS Compliant (Lead Free Manufactured) Electric Fork Lift (Filtering and Surge Suppression) Open Frame (No chassis just heat sink bars) Safety Special Inspection (CSA/UL) Heavy duty ruggedization with wide temperature range Custom input/output available Three year parts and labour warranty Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 11-15 VDC Charger Output - Amps = 13 Charger Output Voltage = 24 VDC Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: VTC3051224