Analytic Systems VTC605-12-24 Battery ChargersNon Iso DC/DC Converter 22A, 24V Out, 11-15V InStep up a 12 VDC battery to between 13.5 and 17.0 or 24.0 and 27.5 DC in 0.5 VDC increments (via 3 position DIP switch), or stabilize a 12 or 24 VDC power system.Safety features include reverse input protection, low input voltage alarm, low output voltage alarm, over temperature shutdown and alarm, a dry contact alarm relay output and output overvoltage crowbar. If the input voltage exceeds the regulated output voltage,the unit simply passes the voltage through with full LC filtering and a single schottky diode drop (0.5 VDC or less). Optional features include remote panel monitoring with On/Off control.Applications include temporarily brightening 12 volt headlights or work lights, increasing voltage into an automotive or marine ignition system for hotter spark and/or prevention of failures due to voltage drop during engine start, stabilizing 12V and 24 VDC power systems in marine, automotive or aeronautical environments and more.Features: Ultra-quiet power sensitive electronics without interference Rugged and reliable to ensure years of safe and trouble free operation Power sensitive electronics without interference Simple operation Paralleling Diodes European ROHS Compliant (Lead Free Manufactured) Electric Fork Lift (Filtering and Surge Suppression) Open Frame (No chassis just heat sink bars) Safety Special Inspection (CSA/UL) Heavy duty ruggedization with wide temperature range Custom input/output available Three year parts and labour warranty Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 11-15 VDC Charger Output - Amps = 22 Charger Output Voltage = 24 VDC Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: VTC6051224

Analytic Systems PWS1000-110-12 Battery ChargersPower Supply 110AC to 12DC/70AThe PWS1000 Series of power supplies provides 12, 24 or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source.Analytic Systems’ power supplies use Switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. Circuit innovations reduce output ripple to levels previously available only from bulky and inefficient linear power supplies. Reliability features include an input fuse, thermal shutdown, current limiting and output short circuit protection with automatic recovery. An Output Over voltage Crowbar circuit protects any powered devices from excessive voltage in the event of a failure of the unit.The newly updated single-board PWS1000 is ultra-quiet and features the latest generation of current mode PWM control. Extra features include adjustable output voltage audible and visual indicators for low input voltage, low output voltage, over temperature, overload and output on. Either 110 or 220 VAC input (Field Convertible) is available. The PWS1000 also features a four contact output terminal (two positive and two negative contacts) for easy connection of devices to the supply.Features: Power sensitive electronics without interference Rugged and reliable to ensure years of safe and trouble free operation Adjustable output voltage Extremely rugged and well suited for marine and other demanding environments Ultra-quiet low EMI operation Audible & visual indicators for output overload, low input voltage, low output voltage & over-temperature Over-temperature shutdown Current limiting Short circuit protection Output overvoltage crowbar Dry contact output fail relay Remote control option Digital Volt/Ammeter option Custom output voltages available (8V to 55V) 19” Rackmount Available Parallel output diodes available Three year parts and labour warranty Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 110 VAC Charger Output - Amps = 60-70 Charger Output Voltage = 12 VDC Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: PWS100011012

Analytic Systems PWS1000-110-24 Battery ChargersPower Supply 110AC to 24DC/40AThe PWS1000 Series of power supplies provides 12, 24 or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source.Analytic Systems’ power supplies use Switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. Circuit innovations reduce output ripple to levels previously available only from bulky and inefficient linear power supplies. Reliability features include an input fuse, thermal shutdown, current limiting and output short circuit protection with automatic recovery. An Output Over voltage Crowbar circuit protects any powered devices from excessive voltage in the event of a failure of the unit.The newly updated single-board PWS1000 is ultra-quiet and features the latest generation of current mode PWM control. Extra features include adjustable output voltage audible and visual indicators for low input voltage, low output voltage, over temperature, overload and output on. Either 110 or 220 VAC input (Field Convertible) is available. The PWS1000 also features a four contact output terminal (two positive and two negative contacts) for easy connection of devices to the supply.Features: Power sensitive electronics without interference Rugged and reliable to ensure years of safe and trouble free operation Adjustable output voltage Extremely rugged and well suited for marine and other demanding environments Ultra-quiet low EMI operation Audible & visual indicators for output overload, low input voltage, low output voltage & over-temperature Over-temperature shutdown Current limiting Short circuit protection Output overvoltage crowbar Dry contact output fail relay Remote control option Digital Volt/Ammeter option Custom output voltages available (8V to 55V) 19” Rackmount Available Parallel output diodes available Three year parts and labour warranty Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = NONE Charger Output - Amps = NONE Charger Output Voltage = NONE Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: PWS100011024

Analytic Systems BCH10W-12 Battery ChargersWaterproof IP66 DC Battery Charger 10A, 12V Out, 20-80V In, RuggedizedThe BCH10 Step Down series of Battery Chargers supply up to 10 amps of charging current at 12, 24, 36 or 48 volts from any higher voltage between 20 and 80 volts DC in an IP66 rated watertight and EMC shielded enclosure for use in automotive, heavy equipment, marine, industrial, rail or alternative energy environments. The output voltage is configured to allow permanent connection to the battery.The standard BCH10W model offers a Deutsch connector on a pigtail input/output cable, and the military grade BCH10MW features separate bayonet style MIL connectors for input and output.The all surface mount high frequency design offers higher reliability, higher efficiency (more than 91%), more power (up to 544 watts at 48 VDC Out) and minimum size.The BCH10MW is rated for operation from -40 to +55 degrees C and has been tested and confirmed to meet MIL-STD-461F for radiated and conducted emissions. It is designed to meet MIL-STD-810G for shock and vibration.The unit has reverse input protection, reverse battery connection protection, output over-voltage protection and features spark free connection to the battery. Smart Ideal Diode output circuitry prevents any reverse current flowing from the battery back into the converter.Features: Watertight O-ring sealed and EMC gasketed enclosure ‘Output ON’ and “Charging” LED indicators Up to 80V input Compact size and easy mounting Deutsch DT04-4P connector on pigtail or MIL connectors Heavy duty ruggedization with wide temperature range Custom output voltages available Custom connector arrangements Input and output EMC filters Two year warranty (parts and labor) Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 20-80 VDC Charger Output - Amps = 10 Charger Output Voltage = 12 VDC Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: BCH10W12

AP Products 4400LBU Battery ChargersLithium Battery Optimum Charging Module. 4 Hour Charging @ 14.3 VDC Lithium Battery Optimum Charging Module. 13.9 Float Mode Maintaining Full Charge. Compatible with: 8300 Series;5300 Series; 4400 Series; 5400 Series;5345RU; 6345RU; 7345RU; 7355RU. Assembled in North America using US Steel. Easy Installation. 4 Hour Charging @ 14.3 VDC Lithium Battery Optimum Charging Module 13.9 Float Mode Maintaining Full Charge Compatible with: 8300 Series;5300 Series; 4400 Series; 5400 Series;5345RU; 6345RU; 7345RU; 7355RU Assembled in North America using US Steel Easy Installation Normalized SKU: 4400LBUUPC Code: 711217034107

Battery Tender 021-0134-DL-WH Battery ChargersFully automatic, constant-current battery charger designed to charge and/ or maintain up to 5 12-volt batteries simultaneously @ 2 amps. Safe, No Spark Charging! To avoid dangerous dead-short sparking, microchip circuitry will not activate output voltage until clips are correctly connected to battery. Maintains batteries at full charge. 2 amps per output charging current.Normalized SKU: 0210134DLWHUPC Code: 203300002907

Battery Tender 021-1164 Battery ChargersSolar Panel with built-in Battery Tender® 3-step automatic microprocessor controller. 100% portable battery charging and maintenance. Perfect for storage space without power access! BATTERY TENDER® SOLAR PANELS ARE THE ONLY PANELS AVAILABLE WITH A BUILT-IN CHARGE CONTROLLER TO PREVENT OVERCHARGING! Sparkproof.Normalized SKU: 0211164UPC Code: 203300002303

Download LiteratureBattery Tender 022-0234-DL-WH Battery Chargers12V, 15/8/2A Selectable Chemistry Battery ChargerThe 12V 2, 8, and 15 AMP Battery Tender® selectable smart battery charger is great for automotive, marine, industrial, and heavy-duty applications. Equipped with an LCD display for easy-to-read charging status, charging current, voltage, battery type (chemistry), and error messages.The charge rate selection button makes it easy to change between 2 AMPs, 8 AMPs, and 15 AMPs. Connect the hard-wired clamps to your 12V battery, plug in the AC power cord, and select your charging mode of choice. Battery Tender® smart battery chargers extend battery life by 2X or more.Features: For all types of 12V lead-acid batteries, including Gel and AGM Winter charging mode The interactive LCD display shows the charging rate selected, battery type selected, battery percentage charged, and error messages Spark proof Reverse hook-up protection Short-circuit protection The charger is intended for household use Includes:Ergonomic clampsSpecifications: Selectable Battery Types: standard, AGM, Gel Auto-charging or Selectable Charging Rates: 2A slow charge, 8A charge, 15A rapid charge Charger Weight: 2.9 lbs Charger Dimensions (L X W X H) (inch): 10" x 7.5" x 5.25" Normalized SKU: 0220234DLWHUPC Code: 734357223415Battery Tender 022-0234-DL-WH Literature Download Owners Manual

Battery Tender 022-0185G-DL-WH Battery ChargersThe Battery Tender is a 1.25 amp battery charger that automatically switches from full charge to a float charging mode, and then monitors the battery. When the battery is accepting only 0.5 amps, the Battery Tender switches into a float charging mode. At this point, both the current and the voltage are held at 13.2. The gassing point of a battery is 13.8 volts, therefore applying voltage greater than 13.8 for an extended period of time will damage the battery. Trickle chargers decrease current, but increase voltage to upwards of 15.5 volts, and continue the excessive gassing action that is most detrimental to the life of batteries.Normalized SKU: 0220185GDLWHUPC Code: 734357218565

Battery Tender 022-0209-DL-WH Battery Chargers The Battery Tender® 4 Amp Power Tender Selectable 12- or 6-volt options, as well as battery type selection, has you covered. It's lightweight, compact, and fully automatic; very easy to use, especially in small spaces. It will keep your battery fully charged so that it is ready to go when you are! 12V or 6V switchable @ 4A AGM/Standard or GEL/Lithium Iron switchable ISM™ (Infinite Sequential Monitoring) of the fully automatic 4-step charge process (qualification, bulk charge, absorption, float) Microprocessor controlled Spark proof even when output leads touch. Reverse Polarity Protection - no charge or battery damage State of charge LED indicator Includes Rings & Clips Shipping Weight: 3.15lbs Dimensions: 6.8" x 3.68" x 1.96" (charger only) 5 Year Warranty Normalized SKU: 0220209DLWHUPC Code: 734357220902

Battery Tender 021-1165 Battery Chargers Solar Panel with built-in Battery Tender® 3-step automatic microprocessor controller. 100% portable battery charging and maintenance. Perfect for storage space without power access! BATTERY TENDER® SOLAR PANELS ARE THE ONLY PANELS AVAILABLE WITH A BUILT-IN CHARGE CONTROLLER TO PREVENT OVERCHARGING! Sparkproof. Normalized SKU: 0211165UPC Code: 203300002204