Black Oak LED RGB-C Wiring & AccessoriesRGB Controller Get the most out of your RGB lights.  Giving you the option to select and cycle through nearly endless color options.  Mount the module in a secure place in the console, glove compartment, or another secure location, and enjoy the ease of use of the handheld controller.In the box: RGB Module Wireless controller *Sold as an Individual   Normalized SKU: RGBCUPC Code: 850044517367

Black Oak LED DIM Wiring & AccessoriesDimmer Module This dimmer module allows you to dim the LEDs down to 25%, 50%, and 75%.  With the handheld remote control, you can easily turn the light on/off and dim to your preferred brightness.In the Box: Dimmer module Wireless controller *Sold as an Individual  Normalized SKU: DIMUPC Code: 850044517329

Download LiteratureShadow Caster SCM-LC-N2K Wiring & AccessoriesLight Commander NMEA 2000, Wi-Fi/Bluetooth & Network for Simrad OnlyThe Shadow-Caster Light Commander is an NMEA2000 connected lighting controller based on the newly published NMEA2000 lighting control standards. Utilization of NMEA2000 lighting standards enables “next level” implementation of lighting control and marine system integration and system interoperability. The expandable SC-Light Commander multi-zone lighting controller supports up to 6 zones of lighting per module with native support for 4 zones of RGB or RGBW lights. The lighting controller supports programs including multiple color fade, music sync, and color rotation. The light commander comes in a fully sealed IP67 housing, with a backlit logo design.Features: NMEA2000 Backbone or MFD Network Port Connectivity IP67 Water-resistant rated housing with waterproof connections All in one design, no need for a separate MFD communication bridge Deutsch style IP67 rated connections, for clean OEM installations “Digitally fused” over current protection circuits, 15amps/ channel (X4) Up to 6 separate zones of lighting control - expandable to 18 zones by connecting multiple units 6 “Instant ON” switch inputs for enabling lights without MFD control Support for RGB and RGBW lighting Optional wireless connectivity for control from a mobile device Backlit logo and zone indicator LEDs to indicate functions and operation Built-in 3.5mm female audio port and microphone for music sync input Specifications: Enclosure: 8.9” (226mm ) X 4.75” (120mm) x 1.8” (46mm) IP67 rated enclosure Power: Supports over 600 watts of RGB lighting and virtually limitless Shadow-NET® connected modules 15 amps per zone, 60 amps max 10 to 30V input range Direct 3.5mm female audio input or built-in microphone for music synchronization Optional Wi-Fi/Bluetooth connectivity to support Shadow-Caster Light Commander Mobile app Music sync created by onboard DSP (Digital Signal Processing) Shadow-Net® bus allows system expandability Digital power protection set at 15amps/channel Built-in switch inputs for instant-on lighting for each zone Global control for all lighting 24-bit color support and gamma correction for universal color support Normalized SKU: SCMLCN2KShadow Caster SCM-LC-N2K Literature Download Quick Reference Guide

Lumitec 101680 Wiring & AccessoriesKraken Secondary Power Supply with Opto-CouplerFeatures: Connect up to 5 Kraken underwater lights. 480W power supply included. Includes all bus connectors and breakers. Two Opto-Couplers included (signal booster/breaker) Can connect two Poco channels per box. Weatherproof enclosure Normalized SKU: 101680

Lumitec 101731 Wiring & AccessoriesCapri3 Retrofit Kit - WhiteWant to upgrade your current Capri lights to the all-new Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Normalized SKU: 101731UPC Code: 089300017314

OceanLED 013024 Wiring & AccessoriesOceanDMX RC Explore XFM Dual 915MHzThe OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc.Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colours only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual Normalized SKU: 013024

OceanLED 013018 Wiring & AccessoriesOceanDMX RC X-Series Colours 915MHzThe OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc.Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colours only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual Normalized SKU: 013018

OceanLED 013016 Wiring & AccessoriesOceanDMX RC Explore XFM Colours 915MHzThe OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc.Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colours only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual Normalized SKU: 013016

T-H Marine LED-RGBCONT-4R-DP Wiring & Accessories T-H Marine RGBW LED Light Controller #LED-RGBCONT-4R-DP FeaturesRound, White FaceEasy Dash MountChrome TrimIntroducing the ultimate lighting control solution for your marine vessel - the RGBW LED Light Controller from T-H Marine. This advanced controller is designed to elevate your boat's lighting experience to the next level with its advanced RGBW technology. With this controller, you can customize your boat's lighting to match your mood or occasion. Choose from a wide range of colors to create the perfect ambiance for your evening cruise or party on the water. And with the ability to adjust the brightness and intensity of the lights, you can create just the right level of lighting for any activity. The RGBW LED Light Controller is incredibly user-friendly and intuitive to use, thanks to its simple interface and easy-to-navigate menus. It features a sleek and compact design, making it easy to mount anywhere on your boat. And with its durable and waterproof construction, you can rest assured that it will hold up to the harsh marine environment. This advanced controller is compatible with a wide range of RGBW LED lights, making it the perfect choice for upgrading your boat's lighting system. So whether you're looking to create a relaxing atmosphere or a fun party vibe, the RGBW LED Light Controller has got you covered. Normalized SKU: LEDRGBCONT4RDPUPC Code: 733572203837

Download Literature Watch VideoLumitec 101699 Wiring & AccessoriesPoco Digital Lighting Control 3.0Poco Digital Lighting Control is a low-cost, easy-to-install, and set up onboard digital lighting control system that offers full dimming and color control over all your Lumitec PLI-enabled lights at the touch of a button via any compatible MFD or connected smart device. Poco 3.0 adds enhanced wireless security, an external API for compatibility with networked third-party automation systems, and a "Triggers" feature which allows for the triggering of Poco virtual switches by external inputs - all packaged within a responsive user interface for better mobile device usability.Features: PWR: Positive 10-30 VDC POCO supply power. Line must be fused prior to connecting to POCO with 3 Amp ATC blade fuse or equivalent (Constant ON or Switched with ACC Line) GRND: Negative 10-30 VDC POCO supply power ACC: Positive 10-30 VDC, Low current enable line to turn POCO on from remote device (i.e. MFD) (Must be powered to enable Poco) 1-4 IN: Channel Input power. Line must be fused prior to connecting to POCO with 10 Amp ATC blade fuse or equivalent (14 AWG 300V 16 inch long cable) 1-4 OUT: Channel Output power to the lighting circuit. Maximum 10 Amp load per channel. The maximum total load across all channels is limited to 40 Amps. Load on the channel must be only one of the following (Lumitec PLI enabled lighting/lighting capable of dimming (through PWM) / device requiring a standard ON-OFF circuit) (14 AWG 300V 16 inch long cable) LAN: Local Area Network connection. 10/100 Base T data connection to POCO. Standard CAT-5 cable with RJ45 connector required to plug into sealed network cable adapter. (18 inch long cable with Link light) POWER: Indicator - Illuminates Green if POCO is powered on, both PWR and ACC lines must have supply voltage between 10 and 30 VDC CH1-4: Indicator - Illuminates Red if power is supplied to Channel from fuse/breaker panel: - Illuminates Green if power is supplied to Channel input and the channel is turned on inside of POCO controller; PLI enabled lights may be OFF: - Flashes Orange if PLI data is transmitted: - Illuminates Orange if the channel is dimmed through a PWM signal. STATUS: Green blinking light indicates WiFi connection status: - 0 blinks: WiFi disabled - 1 blink: WiFi-enabled but not connected to any peers - 2 blinks: WiFi is connected to one or more peers Blue blinking light indicates Bluetooth-LE connection status: - 0 blinks: Bluetooth-LE is disabled - 1 blink: Bluetooth-LE enabled but not connected - 2 blinks: Bluetooth-LE is connected Normalized SKU: 101699UPC Code: 089300016997Lumitec 101699 Literature Download Quick Reference GuideLumitec 101699 Video