Navpod GP2173 Display MountsPart #: GP2030Description: UncutNavPod Protects Your Electronics In HarshConditionsPre-Cut For Raymarine 12" C120W Offset To The Right SideGrand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (23.25"w x 11.75"h x 6.75"d) Centimeters (59.06w x 29.85h x 17.15d)NAVPOD GP2173 12" PRECUT FOR C120W OFFSET TO RIGHTNormalized SKU: GP2173UPC Code: 659988105889

Navpod GP1173 Display MountsPart #: GP1173Description: Pre-CutNavPod Protects Your Electronics In HarshConditionsPre-Cut For Raymarine 9.5" E120W/C120W Offset To The Right SideGrand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel temperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (23.25"w x 11.75"h x 6.75"d) Centimeters (59.06w x 29.85h x 17.15d) Specifications:Mounting Style = Side Usable Face = NONE Cut/Uncut = CutNAVPOD GP1173 9.5" PRECUT FOR C120W OFFSET TO RIGHT SIDENormalized SKU: GP1173UPC Code: 659988105872

NavPod AG127 Display MountsAG127 Pedestal Guard Double Bend AngleGuard 9.5″ Wide by 1.25″ diameter for one InstrumentPod and a P1050/GP1800/GP1200/GP1900 SailPod below on the angled section. Both Single and Double Bend AngleGuards are available in 1” or 1.25” diameter stainless steel tubes.Features:• 316 grade stainless steel• 065 gauge wall thickness• Mirror polished finish• All 1.25” include stainless steel feet (1” does not include feet) Specifications:Usable Face = NONE Mounting Style = NONE Cut/Uncut = NONENormalized SKU: AG127UPC Code: 659988106121

NavPod AG118 Display MountsAG118 Pedestal Guard Single Bend AngleGuard 9.5″ Wide by 1.25″ diameter for all SailPods and SystemPods.Features: 316 grade stainless steel 065 gauge wall thickness Mirror polished finish All 1.25” include stainless steel feet (1” does not include feet) Specifications:Usable Face = NONE Mounting Style = NONE Cut/Uncut = NONENormalized SKU: AG118UPC Code: 659988101560

NavPod AG27 Display MountsAG27 9.5" Wide AngleGuard - Double Bend - 1" DiameterPart #: AG27NavPod Protects Your Electronics In Harsh ConditionsInstrumentPods and SailPods can be mounted together on a double bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.Features: 9.5" Center to Center 1" Diameter Double Bend 10" Angled Flat Length 8" Upper Vertical Flat Length Specifications:Cut/Uncut = NONE Mounting Style = NONE Usable Face = NONENormalized SKU: AG27UPC Code: 659988106633

NavPod AG18 Display MountsAG18 9.5" Wide AngleGuard - Single Bend - 1" DiameterPart #: AG18NavPod Protects Your Electronics In Harsh ConditionsInstrumentPods and SailPods can be mounted together on a single bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.Features: 1" Diameter Single Bend 9.5" Center to Center 12" Angled Flat Length Specifications:Cut/Uncut = NONE Mounting Style = NONE Usable Face = NONENormalized SKU: AG18UPC Code: 659988106558

NavPod AG218 Display MountsAG218 12" Wide AngleGuard - Single Bend - 1.25" DiameterPart #: AG218NavPod Protects Your Electronics In Harsh ConditionsInstrumentPods and SailPods can be mounted together on a single bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.Features: 1.25" Diameter Single Bend 12" Angled Flat Length 1.25" Tubing Diameter 12" Center to Center Specifications:Cut/Uncut = NONE Mounting Style = NONE Usable Face = NONENormalized SKU: AG218UPC Code: 659988106152

NavPod AG227 Display MountsAG227 12" Wide AngleGuard - Double Bend - 1.25" DiamaterPart #: AG227NavPod Protects Your Electronics In Harsh ConditionsInstrumentPods and SailPods can be mounted together on a double bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.Features: 1.25" Diameter Double Bend 10" Angled Flat Length 8" Upper Vertical Flat Length 1.25" Tubing Diameter 12" Center to Center  All 1.25” include stainless steel feet (1” does not include feet)  Specifications:Cut/Uncut = NONE Mounting Style = NONE Usable Face = NONENormalized SKU: AG227UPC Code: 659988106138

NavPod GP1200-14 Display MountsSailPod Pre-Cut for Simrad NSS12 evo³ & B&G Zeus³ 12 for 9.5" Wide GuardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it”. Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to QualityWe stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. Specifications:Cut/Uncut = Cut Mounting Style = NONE Usable Face = NONENormalized SKU: GP120014UPC Code: 659988113785

NavPod GP1040-43 Mounting HardwareSystemPod Pre-Cut for Garmin ECHOMAP Plus/UHD 92sv/93sv/94sv/95sv – Plus One Additional Instrument for 9.5″ Wide GuardSystemPods are for mounting a radar, chartplotter, and instruments together at the helm. Navigation at your fingertips… "Where you need it, when you need it." SystemPods are the smart solution for mounting your radar, chartplotter, and instruments together at the helm, where you can easily operate and clearly see the fine details of the screen.Features: This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit Pre-cut for MFD on the right and one additional instrument (3.6 in. hole) on the left Specifications: Overall Height (inch): 9.5" Overall Width (inch): 20.25" Overall Depth (inch): 6" Usable Face Height (inch): 7.375" Usable Face Width (inch): 17.5" Usable Face Depth (inch): 5" Max Cutout Height (inch): 7" Max Cutout Width (inch): 17" Structural RigidityThe Gen3 enhancements now include a thicker gauge of acrylic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof SealAll SystemPods are manufactured with a double gasket system, providing an excellent watertight seal. This seal provides the best protection for your marine electronics. SystemPods are made to withstand the harshest, wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless SteelNavPod uses all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on the Traditional Series NavPod. For Gen3 NavPods, they provide nickel-chrome-plated stainless steel tamperproof screws for security combined with a little style! Normalized SKU: GP104043

Navpod GP2170 Display Mounts PART #: GP2170 Description: Uncut (Usable face = 20.77"w x 9.64"h) W x H x D: N/A NavPod Protects Your Electronics In Harsh ConditionsGrand Prix Series Radar / Chartplotter NavPods For 12" Wide Pedestal GuardsWatertight Silicone SealKeeps rain and salt water spray off electrical connections on the back of electronicsTamperproofSpecial fasteners and wrench are included that provide security and convenience to leave electronics on-boardConcealed WiringNo loose wires are exposed to corrosion and UV damageClean InstallationThe clean look of flush mounting. Mount your display where you can best see and reach it.Pre-Cut ModelsCome with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit. Specifications:Mounting Style = NONE Usable Face = NONE Cut/Uncut = NONENAVPOD GP2170 UNCUT USABLE FACE 21W X 9.875HNormalized SKU: GP2170UPC Code: 659988102772

NavPod GP2402 Display MountsInstrumentPod Pre-Cut for 4 Instruments (Simrad IS42/B&G Triton²/AP44 Square Hole) for 12” Wide GuardThe GP2402 InstumentPod comes Pre-Cut for mounting 3 Simrad IS42 / B&G Triton²/AP44 square hole Instruments on a 12″ wide guard. An InstrumentPod is best mounted on a StraightGuard or on the upper portion of a Double Bend AngleGuard with a SailPod mounted below. Normalized SKU: GP2402UPC Code: 659988111972

Navpod GP2302 Display MountsNAVGP2302 InstrumentPodModel: GP2302InstrumentPod Pre-Cut for three instruments (Simrad IS42 / B&G Triton /AP44 square holes) for 12" wide guardThe GP2302 InstumentPod comes Pre-Cut for mounting three Simrad IS42 / B&G Triton /AP44 square hole Instruments on a 12" wide guard. An InstrumentPod is best mounted on a StraightGuard or on the upper portion of a Double Bend AngleGuard with a SailPod mounted below.Specifications Overall Height 6.25 Width 16.625 Depth 4.375 Usable Face Height 5 Width 15.3 Depth 3.125 Max Cutout Height 4.125 Width 14.5 Normalized SKU: GP2302UPC Code: 659988111965

NavPod GP1302 Display MountsGP1302 InstrumentPod Pre-Cut for 3 Instruments (Simrad IS42/B&G Triton/AP44 Square Hole) for 9.5" Wide GuardNavPod InstrumentPod GP1302 for 9.5" Wide Guards are used for mounting three instruments in a single NavPod at the helm or companionway.An InstrumentPod can be mounted on a StraightGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. It can also be used with the SK312 Companionway Mount for positioning sailing instruments above the companionway.Features: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: GP1302UPC Code: 659988111804

NavPod GP1402 Display MountsGP1402 InstrumentPod Pre-Cut for 4 Instruments (Simrad IS42/B&G Triton/AP44 Square Hole) for 9.5" Wide GuardNavPod InstrumentPod GP1402 for 9.5" Wide Guards are used for mounting four instruments in a single NavPod at the helm or companionway.An InstrumentPod can be mounted on a StraightGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. It can also be used with the SK312 Companionway Mount for positioning sailing instruments above the companionway.Features: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: GP1402UPC Code: 659988111811

NavPod GP1401 Display MountsGP1401 InstrumentPod Pre-Cut for 4 Instruments for 9.5" Wide GuardNavPod InstrumentPod GP2400 Series for 12" Guard are used for mounting two - four in a single NavPod at the helm or companionway.An InstrumentPod can be mounted on a StraightGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. It can also be used with the SK312 Companionway Mount for positioning sailing instruments above the companionway.All InstrumentPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Specifications:Usable Face = NONE Mounting Style = NONE Cut/Uncut = CutNormalized SKU: GP1401UPC Code: 659988107876

NavPod GP2401 Display MountsGP2401 InstrumentPod Pre-Cut for 4 Instruments for 12" Wide GuardNavPod InstrumentPod GP2400 Series for 12" Guard are used for mounting two - four in a single NavPod at the helm or companionway.An InstrumentPod can be mounted on a StraightGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. It can also be used with the SK312 Companionway Mount for positioning sailing instruments above the companionway.All InstrumentPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Specifications:Usable Face = NONE Mounting Style = NONE Cut/Uncut = CutNormalized SKU: GP2401UPC Code: 659988107890

NavPod GP1301 Display MountsGP1301 InstrumentPod Precut w/3-3.6" Holes f/9.5" GuardNavPod's InstrumentPod GP1301 for 9.5" Guard is used for mounting three instruments in a single NavPod at the helm or companionway.An InstrumentPod can be mounted on a StraightGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. It can also be used with the SK312 Companionway Mount for positioning sailing instruments above the companionway.All InstrumentPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Specifications:Cut/Uncut = Cut Mounting Style = NONE Usable Face = 15.24" x 5" Usable FaceNormalized SKU: GP1301UPC Code: 659988107838

NavPod GP2301 Display MountsGP2301 InstrumentPod Precut w/3-3.6" Holes f/12" GuardNavPod InstrumentPod GP2301 for 12" Guard is used for mountingthree instruments in a single NavPod at the helm or companionway.An InstrumentPod can be mounted on a StraightGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. It can also be used with the SK312 Companionway Mount for positioning sailing instruments above the companionway.All InstrumentPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Specifications:Cut/Uncut = Cut Mounting Style = NONE Usable Face = 15.24" x 5" Usable FaceNormalized SKU: GP2301UPC Code: 659988107852

NavPod GP1400 Display MountsGP140 InstrumentPod Uncut for 9.5" Wide GuardNavPod InstrumentPod GP2400 Series for 12" Guard are used for mounting two - four in a single NavPod at the helm or companionway.An InstrumentPod can be mounted on a StraightGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. It can also be used with the SK312 Companionway Mount for positioning sailing instruments above the companionway.All InstrumentPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Specifications:Usable Face = 20.375"W x 5"H Mounting Style = NONE Cut/Uncut = UncutNormalized SKU: GP1400UPC Code: 659988107869