00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab 4 Conductor Cable 14 AWG Wire #LT W4
$4.06
$4.78
Lectrotab LT W4 Trim TabsLectrotab 4 Conductor Cable 14 AWG Wire #LT W4Normalized SKU: LTW4
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Actuator Lower Bracket with Pin #BL
$19.45
$23.22
Download LiteratureLectrotab BL Trim TabsActuator Lower Bracket with Pin Replacement of lower bracket with pin for the actuator. Attaches to lower ram on actuator with a pin.*Sold as an Individual Normalized SKU: BLLectrotab BL Literature Download Product Brochure
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Actuator Lower Bracket with Pin #LT BL
$18.49
$22.07
Lectrotab LT BL Trim TabsLectrotab Actuator Lower Bracket with Pin #LT BLNormalized SKU: LTBL
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Actuator Upper Bracket #BU
$19.45
$23.22
Download LiteratureLectrotab BU Trim TabsActuator Upper Bracket Replacement upper bracket for the actuator. Attaches to standard actuator upper cover boss with the bolt. *Sold as an Individual Normalized SKU: BULectrotab BU Literature Download Product Brochure
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Actuator Upper Bracket #LT BU
$16.41
$19.59
Lectrotab LT BU Trim TabsLectrotab Actuator Upper Bracket #LT BUNormalized SKU: LTBU
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab EZ Board 36" Boarding Handle #EZ36-W
$38.75
$46.25
Lectrotab EZ36-W HandrailsEZ Board Boarding Handle - 36"Removable boat boarding assist handle. Converts a standard fishing rod holder for use as a boarding assist handle. Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features:
Assist in maintaining balance while boarding
Slides easily into and out of most flush-mounted rod holders
No special tools needed
Made from high-impact, corrosion and UV-resistant PVC
Five (5) Year Replacement Warranty
Made in the USA
Installation & Removal Instructions:
Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance.
Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove.
Do not force the EZ Board handle to install or remove.
Note:Please be advised that it is up to the customer to drill the holes so that they can orient the handle however they would like to. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder. Normalized SKU: EZ36WUPC Code: 698690393641
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab EZ Board 48" Boarding Handle #EZ48-W
$42.32
$50.78
Lectrotab EZ48-W HandrailsEZ Board Boarding Handle - 48"Removable boat boarding assist handle. Converts a standard fishing rod holder for use as a boarding assist handle. Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features:
Assist in maintaining balance while boarding
Slides easily into and out of most flush-mounted rod holders
No special tools needed
Made from high-impact, corrosion and UV-resistant PVC
Five (5) Year Replacement Warranty
Made in the USA
Installation & Removal Instructions:
Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance
Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove
Do not force the EZ Board handle to install or remove
Note:Please be advised that it is up to the customer to drill the holes so that they can orient the handle as they would like. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder. Normalized SKU: EZ48WUPC Code: 698690394839
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab EZ Cleat 22" Auxiliary Tie Down #EZ22-W
$42.32
$50.78
Lectrotab EZ22-W CleatsEZ Cleat Auxiliary Tie Down - 22"Features:
EZ Cleat
22"
Auxiliary Tie Down
Weight: 1.5 lbs.
Normalized SKU: EZ22WUPC Code: 698690392248
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Flat Rocker Switch #SAF-SC
$124.45
$151.20
Download LiteratureLectrotab SAF-SC Trim TabsFlat Rocker SwitchLectrotab's new flat rocker switch has improved sealing to prevent water entry and recessed rocker to prevent breaking. Specially designed to provide and "instant stop" circuit when the switches are released, thus preventing actuator over-run. The gasket sealed switch is designed to prevent water entry. The control switch is self-contained and does not require an additional control box. Features:
Switches meet mil-std 202F for salt spray
Designed to provide "instant stop" to prevent actuator over-run
Gasket sealed switch to prevent water entry
Operates up to 2 actuators per tab on 12 V and 4 actuators per tab on 24 V systems
Technical Specifications:
Display Color - Black
Actuators per Tab Plate - Two (2)
Dimensions (W x H) - 3.125" x 3.25" (79.4 x 82.5 mm)
Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm)
Operating Voltage - 12 or 24 V
*Sold as an Individual Normalized SKU: SAFSCLectrotab SAF-SC Literature Download Owners Manual Product Brochure
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Hardware Kit #HK
$28.46
$33.97
Lectrotab HK Trim Tabs
Hardware Kit Contains Fork Terminals, Terminal Strip and Actuator Upper Bracket Mounting Screws (2 Actuator and 2 Tab Kit)
Terminal Strip and Fork Terminals Connect 6' (1.8m) Actuator Cable to W4, 4-Conductor Cable. 6 Screws Connect Upper Actuator Bracket to Boat Transom
Normalized SKU: HK
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Hardware Kit Contains Fork Terminals T #LT HK
$24.65
$28.88
Lectrotab LT HK Trim TabsLectrotab Hardware Kit Contains Fork Terminals T #LT HKNormalized SKU: LTHK
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab HD SS Trim Tab Plate 12" L x 12" W #T12X12-9008
$157.28
$199.75
Lectrotab T12X12-9008 Trim Tabs
Lectrotab heavy-duty stainless steel trim tabs incorporate a 90° taper bent edge to provide unmatched strength and reliability. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design eliminates the need for welding. These tabs are made from corrosion-resistant 12-gauge, 304 stainless steel and are available in standard finish (as shown) or black-powder coated stainless steel. Heavy duty tabs are available in 9" (23cm) and 12" (30cm) chord lengths (chord is the length from the transom to the tab trailing edge) and in widths between 9" (23cm) and 48" (122cm). See the specification chart for dimensional details. All tabs exceeding a 24" (61cm) width feature a 90-degree bent-up trailing edge for additional strength.
90° Taper-bent edges for additional strength
Strong, corrosion-resistant 12-gauge, 304 stainless steel
Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
Standard chord lengths available in 9" (23cm) and 12" (30cm) and widths from 9" (23cm) to 48" (122cm)
Custom chord lengths and widths are also available
Dual actuator mounting available (see dual actuator tab spec sheet)
Black powder coated finish available
Zinc anodes may be installed for additional galvanic corrosion resistance
Bent trailing edge standard for tabs exceeding 24" width
Includes carriage bolts and nuts for actuator mounting to tab
Normalized SKU: T12X129008
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Heavy Duty 12v Actuator 23' Cable Length #A-BK-26
$266.23
$338.13
Download LiteratureLectrotab A-BK-26 Trim Tabs12 V Heavy Duty Tab Actuator - 6' Cable for Everglades Boats Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator. The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket. Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low profile transom mounting bracket. Compatible With:Everglades Boats
Features:
Stainless Steel upper mounting bracket
Reinforced actuator upper mounting boss
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
All actuators fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 6' (1.8 M)
Actuator Vertical Height - 11.875" (302 mm)
Connectors - Deutsch style
*Sold as an Individual Normalized SKU: ABK26Lectrotab A-BK-26 Literature Download Owners Manual Product Brochure
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Heavy Duty 12v Actuator 23' Cable Length #A-BK-43
$275.89
$350.40
Download LiteratureLectrotab A-BK-43 Trim Tabs12 V Heavy Duty Tab Actuator - 23' Cable Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator. The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket. Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low profile transom mounting bracket. Features:
Stainless Steel upper mounting bracket
Reinforced actuator upper mounting boss
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
All actuators fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Upper Mounting Bracket - Bolt, nut and washer
Lower Mounting Bracket - Bolt, nut, spacer and washer
*Sold as an Individual Normalized SKU: ABK43Lectrotab A-BK-43 Literature Download Owners Manual Product Brochure
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Heavy Duty 12v Actuator 6' Cable Length #A-BK-20
$257.81
$327.43
Download LiteratureLectrotab A-BK-20 Trim Tabs12 V Heavy Duty Tab Actuator - 6' Cable Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator. The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket. Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low profile transom mounting bracket. Features:
Stainless Steel upper mounting bracket
Reinforced actuator upper mounting boss
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
All actuators fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 6' (1.8 M)
Actuator Vertical Height - 11.875" (302 mm)
Upper Mounting Bracket - Stainless Steel - 12 gauge
Lower Mounting Bracket - Standard
*Sold as an Individual Normalized SKU: ABK20Lectrotab A-BK-20 Literature Download Owners Manual Product Brochure
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Heavy-Duty 12v Actuator 6' Cable Length #A-BK-10
$223.94
$284.42
Lectrotab A-BK-10 Trim TabsHeavy-Duty 12V Actuator - 6' CableLectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy-duty trim tab actuator. The heavy-duty actuator features a reinforced upper mounting boss and a 12-gauge stainless steel upper bracket. Lectrotab heavy-duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion-free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic, permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low-profile transom mounting bracket. Actuators come in 12 and 24 VDC with an 8-second recommended stroke time.Features:
Stainless Steel upper mounting bracket
Reinforced actuator upper mounting boss
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes an internal pressure equalization system
Upgrades to the most popular hydraulic and electromechanical systems
Internal brake system prevents unwanted tab movement when underway or backing down
Quiet operation
All actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure that cannot corrode and will not deteriorate in the sun or under water
Normalized SKU: ABK10UPC Code: 850046155970
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Hydroplane 8" x 7.5" Plates Pair #HD800
$57.69
$69.23
Lectrotab HD800 Trim TabsHydroPlane 8" x 7.5" Plates - PairThe HydroPlane system features dynamic hinge technology that reacts to water pressure and boat speed to produce a smoother ride and better handling. Thermo-molded composite construction provides superior strength and resilience in any water conditions. The autonomous trim plates become an extension of the boat’s running surface and require no external activation. For overall stability, faster time to plane, and elimination of common problems like porpoising and chine walking, HydroPlane provides the port-to-starboard balance that hydrofoils cannot.Features:
No maintenance
No pilot interface
Faster time to plane
Uses hydrodynamic lift
Up to 50% more effective than Hydrofoils
Creates balance
Reduces fuel consumption
Technical Specifications:
Trim Tab Size (L x W) - 7.5" x 8.25"
Boat Length - Under 16'
Trim Tab Material - Polypropylene with Glass Fill
In the Box:
Two (2) plates/tabs
Mounting hardware
Instruction manual
*Sold as a Pair Normalized SKU: HD800UPC Code: 698690807506
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Joystick LED Control #JLC-11
$405.70
$506.37
Download LiteratureLectrotab JLC-11 Trim TabsJoystick LED Trim Tab ControlLectrotab’s Joystick LED control incorporates features requested by boat owners to provide user-friendly control for a more enjoyable boating experience.Features:
Single “Joystick” control
NMEA 2000 compatible
LED display of each trim tab position
Microprocessor-based trim tab control with LED tab position indicators
NMEA 2000 compatible with JLC-NMEA adapter
Move both tabs up or down simultaneously with a single motion
Dual station ready – just add a second JLC-11 and JR-* cable (sold separately)
Automatic return to last tab position if the ignition key is turned off and back on again
Completely sealed, completely waterproof, and will not deteriorate in sunlight
Automatic tab retraction and calibration with key or accessory switch off
Easy upgrade from any of our Lectrotab controls
No external power module required
LED tab position indicators dim automatically in darkness and brighten in sunlight
Single or Dual Actuator per tab
Operates on 12 or 24 VDC systems
Specifications:
Display Color: Black
Number of Stations/Actuators: Single or Dual Station/1 or 2 Actuator/tab
Overall Width: 3.0"/77mm
Overall Height/Thickness: 3.0" (77mm)/2.0" (50mm)
Mounting Hole Cutout (Diameter): 2.625"/66.7mm
DC Voltage: 12/24
Fuse Size Power Input (1 Actuator Per Tab): 12 VDC-15 or 20 AMPs 24 VDC = 10 AMPs
Fuse Size Aux. (Must Connect): 1 to 2 AMPs
Normalized SKU: JLC11UPC Code: 850046155673Lectrotab JLC-11 Literature Download Quick Reference Guide
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Lectrotab Kit with Rocker Switch #XKFA9X12
$542.17
$676.70
Lectrotab XKFA9X12 Trim Tabs
The LECTROTAB KIT With ROCKER SWITCH (XKFA9X12) from Lectrotab is reliable, durable, and high-quality. This boat product does not harm the boat engine but only assists in the smooth and safe operations of the boat. Lectrotab aluminum alloy trim tabs are specifically built for aluminum-hulled boats and are a cost-effective choice for all boats. All aluminum alloy tabs have a "No-Break'' polypropylene hinge. The tabs are composed of marine grade 6005-T5 aluminum alloy, which is similar to 10 gauge stainless steel in strength. A corrosion-resistant epoxy coating is applied to all aluminum tabs. Standard tabs are available in chord lengths of 9" (23cm) and 12" (30cm) and widths of 9" (23cm) to 48" (122cm) and widths of 9" (23cm) to 48" (122cm) (122cm).
Key Features:
Strong, reliable, and high-quality material
Constructed for quick and simple use
Improves boat engine performance
Functional in marine environments
Marine-grade 6005-T5 aluminum alloy
Corrosive-resistant epoxy coating
"No break" polypropylene hinge
Dual actuator mounting
Product Specifications:
Brand: Lectrotab
SKU: XKAF9X12
Weight: 1.00 LBS
Manufacturer Part Number (MPN): XKFA9X12
Normalized SKU: XKFA9X12
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lectrotab
Lectrotab Low-Profile Actuator Upper Bracket #BU-5
$21.50
$25.66
Download LiteratureLectrotab BU-5 Trim TabsActuator Low Profile Upper Bracket Replacement upper bracket for the actuator. Attaches to standard actuator upper cover boss with the bolt.*Sold as an Individual Normalized SKU: BU5Lectrotab BU-5 Literature Download Product Brochure
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.