Download LiteratureSeaview SP2MODBLKV2 Radar MountComplete Spreader Kit for Radars & Satdomes for Mounts Ending in M2 - BlackThis three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever you decide to put on there will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS). Normalized SKU: SP2MODBLKV2UPC Code: 850047035899Seaview SP2MODBLKV2 Literature Download Quick Reference Guide Owners Manual

Seaview RW4-7 Mounting HardwareDirect Mount 4° Wedge f/Simrad HALO™ Open Array RadarImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4° below the horizontal. Fits directly with your Simrad HALO™ Open Array Radar.Simple & Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation. Specifications:Light/GPS Bracket = NONE Lean (FWD/Aft) = NONE Construction = NONENormalized SKU: RW47UPC Code: 015568089794

  Download LiteratureSeaview SP2P Mounting HardwareSeaview DPOD Deck Power Pod BoxUncut small MFD Pod, quick lock and release rotating base.Overall Dimensions: Width: 12.305" Height: 7.555" Depth: 5.08" Max Usable Face: Width: 11.75" Height: 7" Max Cut Out Area: Width: 11" Height: 6.125" The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.Rotating BaseThe quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply pull the secure bolt out and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply push the secure bolt back in, it's so easy you can do it with one hand!ConstructionThe DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.Optional Accessory PodOne of the unique abilities with the DPOD is the ability to add optional side pods (SP1BOX). Currently no other instrument pod for power boats on the market has this feature. Depending on the DPOD box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. Specifications:Cut/Uncut = Uncut Mounting Style = Deck Usable Face = 11.75" X 7"Normalized SKU: SP2PUPC Code: 839662006613Seaview SP2P Literature Download  Product Brochure

  Download LiteratureSeaview SP5P Mounting HardwareSeaview DPOD Deck Power Pod BoxUncut THREE instrument Pod, quick lock and release rotating baseOverall Dimensions: Width: 15.25" Height: 5.5" Depth: 3.185" Max Usable Face: Width: 14.75" Height: 5" Max Cut Out Area: Width: 13.875" Height: 4.125" The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.Rotating BaseThe quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply pull the secure bolt out and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply push the secure bolt back in, it's so easy you can do it with one hand!ConstructionThe DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.Optional Accessory PodOne of the unique abilities with the DPOD is the ability to add optional side pods (SP1BOX). Currently no other instrument pod for power boats on the market has this feature. Depending on the DPOD box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. Specifications:Cut/Uncut = Uncut Mounting Style = Deck Usable Face = 14.75" x 5"Normalized SKU: SP5PUPC Code: 839662006637Seaview SP5P Literature Download  Product Brochure

  Download LiteratureSeaview SP3P Mounting HardwareSeaview DPOD Deck Power Pod BoxUncut medium MFD Pod, quick lock and release rotating baseOverall Dimensions: Width: 14.25" Height: 9.5" depth: 5.147" Max Usable Face: Width: 13.75" Height: 9" Max Cut Out Area: Width: 12.938" Height: 8.125" The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.Rotating BaseThe quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply pull the secure bolt out and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply push the secure bolt back in, it's so easy you can do it with one hand!ConstructionThe DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.Optional Accessory PodOne of the unique abilities with the DPOD is the ability to add optional side pods (SP1BOX). Currently no other instrument pod for power boats on the market has this feature. Depending on the DPOD box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. Specifications:Cut/Uncut = Uncut Mounting Style = Deck Usable Face = 13.75" x 9"Normalized SKU: SP3PUPC Code: 839662006620Seaview SP3P Literature Download  Product Brochure

Seaview PMA-DM124-M2 Mounting HardwareDual Mount - 33"Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management. Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Eliminate InterferenceA Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation. UniversalThe lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount. Modular Top PlateThe top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. Fits the Below Electronics: 18" - 24" closed dome radars 16" - 18" satdomes Cameras Normalized SKU: PMADM124M2UPC Code: 839662009034

Seaview PMADM1M2BLK Mounting HardwareSeaview PMADM1M2BLK Modular Dual MountModel: PMADM1M2BLKInstall your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.The top platform is where you bolt the Top Plate(Sold Spearately) to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.Normalized SKU: PMADM1M2BLKUPC Code: 727908835427

Seaview PMA-DM2-M2-BLK Radar MountSeaview SVWPMADM2M2BLK Dual Mount - Requires PlateModel: PMADM2M2BLKThe 22.5" tall Seaview Dual Mount is pre-drilled for up to 4.5' Open Array Radar. The top is for Satellite domes. This Dual Mount is for Open Array Radars & Satdomes or Cameras. The oval hollow mast section allows for easy cable management. The small 10"x10" foot print design is a great solution for limited space. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)*Normalized SKU: PMADM2M2BLK

Seaview PMA-DM3-M1-BLK Radar MountSeaview SVWPMADM3M1BLK Dual Mount Black Finish - Requires PlateModel: PMADM3M1BLKInstall your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately.For use with up to 4.5ft open array radars and 16-18in satelitte domes.Normalized SKU: PMADM3M1BLK

Seaview SVEHB1 Mounting HardwareElectrically Actuated Hinge 24V Fits Seaview Mounts Ending in M1 & M2The Seaview SVEHB1 electrically actuated hinge will fit all Seaview mounts with 7"x7" and 10"x10" mounting base plates. Some electronics can also be mounted directly to the hinge plates when needed (contact Seaview to direct mount electronics). Professionally designed to raise and lower marine electronics with the push of a button. This single electrically actuated hinge will accommodate single small Seaview mounts up to large dual mounts fully loaded with marine electronics. This hinge is 5-9/16" tall x 13" wide x 20-1/2" long. This will hinge approximately 93 degrees leaving the hinge plate vertical off the mounting surface about 11-7/16".This Seaview hinge is marine grade aluminum expertly fabricated for consistently superior welds. The actuator used is 24V however, 12V is an option with a conversion kit. The 24V actuator has a current draw of 10.4 amps on startup and when it is fully loaded with 2248 pound-force. The hinge has a very durable finish unlike anything else in the industry. This is first chem treated (for corrosion resistance), then an epoxy polyester primer coat is applied and finished with a polyester powder coat for a superior gloss white finish. There are two waterproof cable glands inside the hinge for water proof cable routing. This also has a removable lid to conveniently service the inside of the hinge if needed.This actuated hinge has been used for many applications. Some examples, but not limited to are: Princess 66, Navetta 48, Sunseeker 52 & 66, Absolute 58, Sabre 45, Jupiter 27 and HCB Yacht 65CC.Features: Electrically Actuated Hinge  Volt: 24V  Fits Seaview Mounts ending M1 and M2 Normalized SKU: SVEHB1UPC Code: 727908835731

Seaview PM-114LT-LED Mounting HardwarePM-114LT-LEDThis Seaview Floodlight Kit for 1-1/4" diameter light bars. The kit includes LED a 5.35" x 1.65" Hella marine LED deck floodlight 9-33v DC, 1-1/4" stainless steel clamp and hardware. Normalized SKU: PM114LTLEDUPC Code: 839662009263

Download LiteratureSeaview SRM200W Mounting HardwareGen 3 Standard Starlink Antenna MountThe Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance. The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, marine or vehicle mounting necessitates additional support. Opting for the Seaview SRM200W Mount is a superior choice, offering a reliable and adaptable mounting solution. You have the option to utilize through-bolts for a permanent fixture through machined holes in the mount's base or pair it with the Seaview 8° Wedge base for a highly versatile installation.*The SRM200W can be mounted directly or it can be mounted to the Starlink 8° Wedge Base (SVSLWB). Normalized SKU: SRM200WUPC Code: 850047035585Seaview SRM200W Literature Download Quick Reference Guide Owners Manual