Loctite-Permatex 800368 Adhesives & SealantsThe Right Stuff® Caulking GunMake leak-proof gaskets and return equipment to service immediately! Permatex premier instant gasket maker was designed as a replacement for conventional gaskets. This elastomeric “formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term salability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe. Fleet-tested.Applications: Automobile - Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps. Motorcycle - Suggested Applications: Transmission housing cover, clutch release cover Heavy Duty - Suggested Applications: Case covers, power divider shaft housings, input/output power shafts, PTO covers to housing, cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges Directions:Slice tip off cartridge. Attach and cut nozzle at desired opening at a 45° angle, and insert into a standard cauking gun. Normalized SKU: 800368

Loctite-Permatex 34311 Adhesives & SealantsThe Right Stuff® Grey Instant Gasket Maker - 5ozSpecifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, the Right Stuff® GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms precut gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant, and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.Applications:Automobile - Suggested Applications: Automotive gaskets, valve covers, oil pans, transmission pans, thermostat housings, water pumps, etc. Directions:Clean and dry parts. Slice tip off cartridge. Attach and cut nozzle at desired opening at a 45° angle, and insert into a standard cauking gun. Apply a continuous 1/8" to 1/4" bead to one surface, surrounding all bolt holes. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. To reuse package, leave a 1/2" length of material extending out of the nozzle. Cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.NOTE: Not for use as a head gasket or on parts in contact with fuels. Normalized SKU: 34311UPC Code: 686226343116

Loctite-Permatex 34310 Adhesives & SealantsThe Right Stuff® 1 Minute Gasket™ Grey Instant Rubber Gasket Maker - 10ozSpecifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, the Right Stuff® GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms precut gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant, and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent. Applications:Automobile - Suggested Applications: Automotive gaskets, valve covers, oil pans, transmission pans, thermostat housings, water pumps.Directions:Clean and dry parts. Slice tip off cartridge. Attach and cut nozzle at desired opening at a 45° angle, and insert into a standard cauking gun. Apply a continuous 1/8" to 1/4" bead to one surface, surrounding all bolt holes. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. To reuse package, leave a 1/2" length of material extending out of the nozzle. Cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.NOTE: Not for use as a head gasket or on parts in contact with fuels. Normalized SKU: 34310UPC Code: 686226343109

Loctite-Permatex 29208 Adhesives & SealantsThe Right Stuff® Gasket Maker - 5ozMake leak-proof gaskets and return equipment to service immediately! Permatex premier instant gasket maker was designed as a replacement for conventional gaskets. This elastomeric “formed-in-place" material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term salability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe. Fleet-tested. Applications: Automobile - Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps. Motorcycle - Suggested Applications: Transmission housing cover, clutch release cover Heavy Duty - Suggested Applications: Case covers, power divider shaft housings, input/output power shafts, PTO covers to housing, cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges Directions:Clean and dry parts. Push nozzle to dispense the Right Stuff®. Apply a continuous 1/8″ to 1/4″ bead to one surface, surrounding all bolt holes. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. Equipment can be returned to service immediately. To reuse package, leave a 1/2″ length of material extending out of the nozzle. Cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.NOTE: Not for use as a head gasket or on parts in contact with gasoline. Normalized SKU: 29208UPC Code: 686226292087

Loctite-Permatex 33694 Adhesives & SealantsThe Right Stuff® Gasket Maker - Instant RubberMake leak-proof gaskets and return equipment to service immediately! Permatex premier instant gasket maker was designed as a replacement for conventional gaskets. This elastomeric “formed-in-place" material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term salability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe. Fleet-tested. Applications: Automobile - Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps. Motorcycle - Suggested Applications: Transmission housing cover, clutch release cover Heavy Duty - Suggested Applications: Case covers, power divider shaft housings, input/output power shafts, PTO covers to housing, cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges Directions:Clean and dry parts. Push nozzle to dispense the Right Stuff®. Apply a continuous 1/8″ to 1/4″ bead to one surface, surrounding all bolt holes. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. Equipment can be returned to service immediately. To reuse package, leave a 1/2″ length of material extending out of the nozzle. Cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.NOTE: Not for use as a head gasket or on parts in contact with gasoline. Normalized SKU: 33694UPC Code: 686226336941

Loctite-Permatex 99070 Adhesives & SealantsThe Right Stuff® Professional Installer SystemMake leak-proof gaskets and return equipment to service immediately! The Right Stuff is our most advanced gasket maker. It eliminates the need to wait for the gasket maker to cure - just reassemble and go! The elastomeric "formed-in-place" material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term sealability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe. Fleet-tested. Features: Seals instantly, forming a reliable, long lasting elastomeric rubber gasket; eliminates the need for pre-formed, pre-cut, paper, rubber or cork gaskets Blowout resistant, allowing leakproof gaskets to be made in just one minute; protects against leaks and seepage caused by vibration and thermal expansion Formulated to meet or exceed performance standards for long-term sealability, durability and handling; this material is used on OEM production lines and specified in their service parts programs Temperature Range: -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps Normalized SKU: 99070UPC Code: 686226990709

Loctite-Permatex 24105 Adhesives & SealantsUltra Black® Maximum Oil Resistance RTV Silicone Gasket Maker - 10.6ozOEM specified. For dealership warranty requirements, Ultra Black® ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through use of a patented adhesion system. Temperature range -65°F to 500°F (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration.Applications: Automobile - Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, differential covers Marine - Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings Directions: For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake & Parts Cleaner. Cut nozzle to desired bead size – gaskets are best formed using a 1/16" to 1/4" bead. Apply a continuous and even bead of silicone to one surface, surrounding all bolt holes. Remove excess with knife at once. Assemble parts immediately. Do not squeeze out silicone by over tightening bolts. Re-torque will not be necessary. Silicone dries in 1 hour, and fully cures in 24 hours, at 70% – 50% relative humidity. Allow more time in cold weather. Replace cap after use. Clean hands with dry cloth or Permatex® Fast Orange® Hand Cleaner. Clean tools with non-flammable cleaning fluid. NOTE: Not recommended for use on head gaskets or parts in contact with gasoline. Normalized SKU: 24105UPC Code: 686226241054

Loctite-Permatex 85080 Adhesives & SealantsUltra Black® Maximum Oil Resistance RTV Silicone Gasket MakerOEM specified. For dealership warranty requirements, Ultra Black® ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through use of a patented adhesion system. Temperature range -65°F to 500°F (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration. Applications: Automobile - Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, differential covers Marine - Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings Directions: For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake & Parts Cleaner. Cut nozzle to desired bead size – gaskets are best formed using a 1/16″ to 1/4″ bead. Apply a continuous and even bead of silicone to one surface, surrounding all bolt holes. Remove excess with knife at once. Assemble parts immediately. Do not squeeze out silicone by over tightening bolts. Re-torque will not be necessary. Silicone dries in 1 hour, and fully cures in 24 hours, at 70% – 50% relative humidity. Allow more time in cold weather. Replace cap after use. Clean hands with dry cloth or Permatex® Fast Orange® Hand Cleaner. Clean tools with non-flammable cleaning fluid. NOTE: Not recommended for use on head gaskets or parts in contact with gasoline. Normalized SKU: 85080UPC Code: 686226850805

Loctite-Permatex 81725 Adhesives & SealantsUltra Blue® Multipurpose RTV Silicone Gasket Maker - 13ozOEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturer performance requirements. Sensorsafe, low odor, and noncorrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Guaranteed not to leak. Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent. Applications:Automobile - Suggested Applications: Valve covers, oil pans, and timing covers.Marine - Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housingsDirections:For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake & Parts Cleaner. Cut nozzle to desired opening and insert into a standard caulking gun – gaskets are best formed using a 1/16" to 1/4" (2 to 6 mm) bead. Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn. Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions. Clean hands with dry cloth or Permatex® Fast Orange® Hand Cleaner. Clean tools with non-flammable cleaning fluid.NOTE: Not recommended for use on head gaskets or parts in contact with gasoline. Normalized SKU: 81725UPC Code: 686226817259

Loctite-Permatex 82195 Adhesives & SealantsUltra Grey Rigid High Torque RTV Silicone - 13ozOEM specified. Permatex® Ultra silicones were developed to meet technology changes. Sensor-safe, low odor, noncorrosive. Outstanding oil resistance and joint movement tolerance. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration. Applications: Automobile - Suggested Applications: Valve covers, oil pans, automatic transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings Heavy Duty - Suggested Applications: Cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges Directions: For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake & Parts Cleaner. Cut nozzle to desired bead size. Gaskets are best formed using a 1/16″ to 1/4″ (1.6 mm to 6.4 mm) bead. Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour, then retighten 1/4 to 1/2 turn. Silicone will skin over in one hour and fully cure in 24 hours, under normal conditions. Allow more time for cold or very dry conditions. Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. Normalized SKU: 82195UPC Code: 686226821959

Loctite-Permatex 80072 Adhesives & SealantsUndercoating Aerosol Can - 20ozProtects fenders, frames, fuel tanks, door panels, rocker panels, hoods and firewalls against moisture, road salt and corrosion. Will not sag or drip. Sound-proofs and insulates. Body shop proven. Level 3.Applications:Automobile - Suggested Applications: Wheel wells, rocker panels, frames and underbody, body repairs, rust holes, tree pruning, driveway cracks, minor roof repairs, and post preserver.Directions:Tap bottom of can to loosen agitator ball. If ball does not loosen, shake can until agitator ball is heard. Shake can for at least five (5) minutes after hearing agitator ball. For best adhesion, apply only to clean, dry surfaces. Apply a uniform coating, holding can 10 to 12 inches from surface. Multiple thin coats are most effective allowing 15 to 20 minutes between coats (shake well before reapplying). Allow to dry for 24 hours. Avoid application of any undercoating or rust proofing materials closer than 12 inches to any part of exhaust system or catalytic converter. NEVER spray directly onto exhaust system or catalytic converter. For cleanup, use mineral spirits or kerosene. This product is NOT considered paintable. Normalized SKU: 80072UPC Code: 686226800725