Garmin 010-N0957-00 GPS SoundersGarmin GSD24 Advanced Sonar Module - RemanufacturedModel: 010-N0957-00The GSD 24 features a vastly improved digital sonar design for superior target definition and deep-water performance.With up to 2,000 Watts of transmit power and a high-dynamic range receiver, the GSD 24 brings high-definition imaging to your compatible Garmin chartplotter. The system is dual frequency (50/200 kHz) capable and offers selectable transmit power (600 W, 1 kW and 2 kW, depending on transducer) for pin-point accuracy at depths of up to 5,000 ft (1,500 m). So whether you’re out sport fishing or just keeping an eye on hazardous terrain and reef structures beneath your boat, you’ll see a clearer picture with enhanced separation of images and deeper bottom detection.Thanks to the easy connectivity of the Garmin Marine Network, installation of the GSD 24 is a snap. Once connected, your sonar data will be shared on any compatible chartplotter on the network. Plus, the network's high-speed connections ensure that you get ultra-fast screen updates with minimal delay.Specifications General CASE MATERIAL Fully gasketed, aluminum and steel housing DIMENSION 8" 11.2" 3.2" (204 mm 284 mm 81 mm) WEIGHT 5.27 lbs (2.39 kg) WATERPROOF IPX7 TEMPERATURE RANGE From 5°F to 158°F (from -15°C to 70°C) Electrical Features POWER INPUT 10-35 V POWER USAGE 40 W maximum FUSE 7.5 A COMPASS-SAFE DISTANCE 15.75 in. (40 cm) Sonar Features FREQUENCY 50/200 kHz TRANSMIT POWER 25-2,000 W rms MAXIMUM DEPTH 5,000 ft. (1,524 m) Connections GARMIN MARINE NETWORK PORTS 1 What's in the Box: GSD 24 - Remanufactured Power cable Marine network cable (6 ft) Mounting hardware 8-pin Female to wire block adapter Documentation Normalized SKU: 010N095700

Garmin 010-02797-00 Black Box ModuleGSD™ 28 Advanced Sonar ModuleSee what’s down there. Catch what’s down there. Take sport fishing to extreme depths with a high-powered sonar module with the features that are needed to improve the chances of success.Features: Engineered for offshore sport fishing See sonar faster with Garmin RapidReturn™ technology Crisp and clear fish targets with Xchirp technology Excellent target separation with xCHIRP technology Greatly reduce wave and swell from bottom returns with heave compensation Garmin RapidReturn Sonar This high-performance technology provides Garmin's fastest deep-water scrolling sonar with 2 to 6 times the ping rate of Garmin's GSD™ 26 sonar. This allows captains to make fast and informed decisions based on what is below their boats.xCHIRP TechnologyEasily distinguish bait from sport fish with Garmin's clearest traditional sonar fish arches and excellent target separation. Get smooth bottom returns and precise targeting at extreme depths.Heave CompensationWhen the seas get rough, use the MSC™ 10 external satellite compass (sold separately) to greatly reduce wave and swell from the sonar returns.Compatibility Transducer SupportThis sonar module is compatible with a wide range of Garmin and AIRMAR® transducers (sold separately).RetrofittingThe GSD 28 module is ideal for retrofitting boats with existing bare wire transducers.Performance Sonar Power GSD 28 can output 300 watts to 3 kW at extreme depthsCHIRP Support The module supports dual-channel CHIRP (up to 3 kW per channel).Operation Range The GSD 28 sonar module can operate in the 25 to 250 kHz frequency range.Built to LastGSD 28 is rated for harsh marine environments and water resistance with an IPX7 rating.In the Box: GSD 28 Power cable Garmin BlueNet™ marine network cable (6 ft) with legacy network adapter Field-installable adapter kit for the Garmin BlueNet network Mounting hardware Documentation SpecificationsGeneral: Case Material: Fully gasketed, aluminum housing, steel back panel, plastic access panel Physical Dimensions: 10.7" × 14.4" × 4.0" (27.06 cm × 36.66 cm × 10.1 cm) Weight: 14.13 lbs (6.4 kg) Water Rating: IPX7  Temperature Range: 5° F to 158° F (from -15° C to 70° C) Electrical Features: Power Input: 10-32 V Power Usage: 120 W maximum Fuse: 15A Sonar Features: Frequencies Supported: Dual channel CHIRP: 25-250 kHz (transducer dependent) Transmit Power: 300W–3kW RMS (transducer dependent) Maximum Depth: 10,000 ft. (3,048 m) xCHIRP: Yes Rapid Return: Yes Connections: Garmin Marine Network Ports: (Garmin BlueNet) Sonar Connections: 2 bare wire WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Normalized SKU: 0100279700UPC Code: 753759330309

Garmin 010-04284-00 Navigational InstrumentsGST™ 43 Thru-Hull Speed/Temperature Transducer w/GST™ 10 BundleThe GST 43 is a thru-hull transducer that can read water speed and temperature. The transducer can retrofit an existing Nexus 43mm thru-hull transducer (TH43).Bundled with the GST 10, the GST 43 can connect directly to the NMEA 2000® network, and the information can be displayed on a compatible Garmin chartplotter or instrument display.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 0100428400UPC Code: 753759139889

Garmin 010-04283-00 TransducersGST™ 43 Thru-Hull Speed/Temperature TransducerThe GST 43 is a thru-hull transducer that can read water speed and temperature. The transducer can retrofit an existing Nexus 43mm thru-hull transducer (TH43).Bundled with the GST 10, the GST 43 can connect directly to the NMEA 2000® network, and the information can be displayed on a compatible Garmin chartplotter or instrument display.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 0100428300UPC Code: 753759139872

Garmin 010-12677-00 TransducersGT10HN-IF Ice Fishing TransducerThe GT10HN-IF ice fishing transducer is perfect for fishermen who want clear definition under the ice with excellent target separation. The narrow, 7-16 degree beam angle provides precise fish and jig detection. The 8-pin transducer features high-narrow CHIRP traditional sonar and has a power rating of 500 W. Its shape and beam widths have been optimized for ice fishing, and it features a silicone-coated cable that remains flexible in harsh winter conditions. Includes a 8-pin to 4-pin transducer adapter cable, foam float and grommet.Includes: GT10HN-IF Transducer Float Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 0101267700UPC Code: 753759188948

Garmin 010-02867-00 TransducersGT12M Bronze Thru-Hull - 350W - 0 DegreeDesigned for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 350-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on your display.Midband Chirp Traditional SonarThis 8-pin, 350-watt bronze thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 800’ in saltwater and 1,200’ in freshwater.Broad Frequency RangeUse the perfect frequency for the waters you’re fishing. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings.Optimum Ping SensitivityOffering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on your compatible chartplotter display.Thru-Hull InstallationA durable bronze housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.Auto-ID TechnologyEnjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to automatically configure itself to the transducer being used.Fits Various Hull TypesConfigurable for a wide variety of boat hull materials, including fiberglass, composite, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20° without a fairing block.In the Box: GT12M-THF transducer Jam nut Washer Documentation Specifications: Transducer Frequency: Medium band CHIRP (85-165 kHz) Transducer Power: 350 W Transducer Beamwidth: 24° -16° Transducer Maximum Depth: 800 ft saltwater / 1200 ft freshwater Transducer Cable Length: 50 ft Transducer Depth/Speed/Temperature: Depth, temperature Transducer Number of Pins: 8-pin Housing Material: Bronze Transducer Supported Deadrise/Transom Angles: 0° supports hull deadrise angles from 0° to 7° Normalized SKU: 0100286700UPC Code: 753759319892

Garmin 010-02867-01 TransducersGT12M Bronze Thru-Hull - 350W - 12 DegreeDesigned for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 350-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on your display.Midband Chirp Traditional SonarThis 8-pin, 350-watt bronze thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 800’ in saltwater and 1,200’ in freshwater.Broad Frequency RangeUse the perfect frequency for the waters you’re fishing. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings.Optimum Ping SensitivityOffering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on your compatible chartplotter display.Thru-Hull InstallationA durable bronze housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.Auto-ID TechnologyEnjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to automatically configure itself to the transducer being used.Fits Various Hull TypesConfigurable for a wide variety of boat hull materials, including fiberglass, composite, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20° without a fairing block.In the Box: GT12M-THF transducer Jam nut Washer Documentation Specifications: Transducer Frequency: Medium band CHIRP (85-165 kHz) Transducer Power: 350 W Transducer Beamwidth: 24° -16° Transducer Maximum Depth: 800 ft saltwater / 1200 ft freshwater Transducer Cable Length: 50 ft Transducer Depth/Speed/Temperature: Depth, temperature Transducer Number of Pins: 8-pin Housing Material: Bronze Transducer Supported Deadrise/Transom Angles: 12° supports hull deadrise angles from 8° to 15° Normalized SKU: 0100286701UPC Code: 753759319908

Garmin 010-02867-02 TransducersGT12M Bronze Thru-Hull - 350W - 20 DegreeDesigned for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 350-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on your display.Midband Chirp Traditional SonarThis 8-pin, 350-watt bronze thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 800’ in saltwater and 1,200’ in freshwater.Broad Frequency RangeUse the perfect frequency for the waters you’re fishing. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings.Optimum Ping SensitivityOffering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on your compatible chartplotter display.Thru-Hull InstallationA durable bronze housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.Auto-ID TechnologyEnjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to automatically configure itself to the transducer being used.Fits Various Hull TypesConfigurable for a wide variety of boat hull materials, including fiberglass, composite, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20° without a fairing block.In the Box: GT12M-THF transducer Jam nut Washer Documentation Specifications: Transducer Frequency: Medium band CHIRP (85-165 kHz) Transducer Power: 350 W Transducer Beamwidth: 24° -16° Transducer Maximum Depth: 800 ft saltwater / 1200 ft freshwater Transducer Cable Length: 50 ft Transducer Depth/Speed/Temperature: Depth, temperature Transducer Number of Pins: 8-pin Housing Material: Bronze Transducer Supported Deadrise/Transom Angles: 20° supports hull deadrise angles from 16° to 24° Normalized SKU: 0100286702UPC Code: 753759319915

Garmin 010-12402-00 TransducersGT15M-IH Plastic, In-Hull, Mid-Band CHIRP Transducer - 85-165kHz, 600W, 8-PinGT15M-IH transducer is ideal for boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It can be used with a hull deadrise angle between 0 and 25 degrees and is excellent for boats traveling at high speeds that want to maintain accurate depth readings.The 8-pin transducer with 4 plastic tanks features mid-band CHIRP traditional sonar (85-165 kHz) and has a power rating of 600 W. It can be used in conjunction with a GT30-TM transducer and an adapter cable so you can maintain depth at high speeds and scanning capabilities at trolling speeds.For installation, follow the included instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 0101240200UPC Code: 753759148577

Garmin 010-02868-00 TransducersGarmin GT15M-THF Stainless Steel Thru-hull 0 Deg Tilted Element Medium CHIRPModel: 010-02868-00 600-watt midband CHIRP (85—165 kHz) transducer with beamwidths of 16—24 degrees Thru-hull flush mounting with durable stainless steel housing and stem An excellent choice for near/offshore fishing and cruising on midsize boats Offers excellent sensitivity for clear structure definition and target separation Crisp fish arches allow you to distinguish between small baitfish and larger target fish Simple plug-and-play operation with Garmin transducer ID auto-identification Configurable for a wide range of boat hull materials, including fiberglass, composite, steel, aluminum and wood The GT15M-THF transducer is designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats. It features high-definition 600-watt midband CHIRP (85—165 kHz) sonar that clearly defines fish targets down to depths of 1,200’ in saltwater and 1,900’ in freshwater. Ideal for installation on all hull materials. The thru-hull transducer offers beamwidths of 16—24 degrees and comes in a durable flush-mount stainless steel housing.What's in the Box: GT15M-THF 0 Deg Tilted Element Jam Nut Thread isolator Hull Isolator Documentation Normalized SKU: 0100286800UPC Code: 753759319922

Garmin 010-02868-01 TransducersGarmin GT15M-THF Stainless Steel Thru-hull 12 Deg Tilted Element Medium CHIRPModel: 010-02868-01 600-watt midband CHIRP (85—165 kHz) transducer with beamwidths of 16—24 degrees Thru-hull flush mounting with durable stainless steel housing and stem An excellent choice for near/offshore fishing and cruising on midsize boats Offers excellent sensitivity for clear structure definition and target separation Crisp fish arches allow you to distinguish between small baitfish and larger target fish Simple plug-and-play operation with Garmin transducer ID auto-identification Configurable for a wide range of boat hull materials, including fiberglass, composite, steel, aluminum and wood The GT15M-THF transducer is designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats. It features high-definition 600-watt midband CHIRP (85—165 kHz) sonar that clearly defines fish targets down to depths of 1,200’ in saltwater and 1,900’ in freshwater. Ideal for installation on all hull materials. The thru-hull transducer offers beamwidths of 16—24 degrees and comes in a durable flush-mount stainless steel housing.What's in the Box: GT15M-THF 12 Deg Tilted Element Jam Nut Thread isolator Hull Isolator Documentation Normalized SKU: 0100286801UPC Code: 753759319939

Garmin 010-02868-02 TransducersGarmin GT15M-THF Stainless Steel Thru-hull 20 Deg Tilted Element Medium CHIRPModel: 010-02868-02 600-watt midband CHIRP (85—165 kHz) transducer with beamwidths of 16—24 degrees Thru-hull flush mounting with durable stainless steel housing and stem An excellent choice for near/offshore fishing and cruising on midsize boats Offers excellent sensitivity for clear structure definition and target separation Crisp fish arches allow you to distinguish between small baitfish and larger target fish Simple plug-and-play operation with Garmin transducer ID auto-identification Configurable for a wide range of boat hull materials, including fiberglass, composite, steel, aluminum and wood The GT15M-THF transducer is designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats. It features high-definition 600-watt midband CHIRP (85—165 kHz) sonar that clearly defines fish targets down to depths of 1,200’ in saltwater and 1,900’ in freshwater. Ideal for installation on all hull materials. The thru-hull transducer offers beamwidths of 16—24 degrees and comes in a durable flush-mount stainless steel housing.What's in the Box: GT15M-THF 20 Deg Tilted Element Jam Nut Thread isolator Hull Isolator Documentation Normalized SKU: 0100286802UPC Code: 753759319946

Garmin 010-12402-10 TransducersGT15M-TM Transom Mount Transducer - 8-PinGT15M-TM transducer is perfect for fishermen who want clear bottom definition under the boat as well as crisp, clear and wide fish arches with excellent target separation to depth up to 1,900 feet.The 8-pin transducer features mid-band CHIRP traditional sonar (85-165 kHz) and has a power rating of 600 W. It can be mounted on the transom.Follow the included installation instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 0101240210UPC Code: 753759174484

Download LiteratureGarmin 010-02930-00 TransducersGT17M-THF SS Mid Band Chirp Transducer - 0° - 1kW - 8-PinDesigned for reduced drag and optimum sonar performance on fishing and cruising boats, this flush-mounted 1 kW mid-band CHIRP (80–165 kHz) transducer clearly defines fish arches, structure, and bottom depth returns on the display.Features: See maximum depth performance to 2,400’ in freshwater Access CHIRP sonar frequency range from 80–165 kHz Search with beamwidths of 9–18 degrees Count on fast-response water temperature sensing The thru-hull design offers flush installation with a 0-degree tilt Auto-ID enables simple plug-and-play operation Midband Chirp Traditional SonarThis 8-pin 1 kW stainless steel thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 1,800’ in saltwater and 2,400’ in freshwater.Broad Frequency RangeUse the perfect frequency for the waters in which users are fishing. Covering the medium frequency range, this transducer pulses from 80–165 kHz, displaying a wide coverage area, clear fish arches, and accurate depth readings.Optimum Ping SensitivityOffering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on the compatible chartplotter display.Thru-Hull InstallationA durable stainless steel housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.Auto-ID TechnologyEnjoy simple plug-and-play operation with Garmin auto-identification technology, which enables the sonar to automatically configure itself to the transducer being used.Fits Various Hull TypesConfigurable for a wide variety of boat hull materials, including fiberglass, composite, steel, aluminum, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–24 degrees without a fairing block.In the Box: GT17M-THF transducer Jam nut Spacer 2 washers 2 set screws Thread isolator Hull isolator Documentation Specifications: Transducer Frequency: Medium band CHIRP (80-165 kHz) Transducer Power: 1 kW Transducer Beamwidth: 9°-18° Transducer Maximum Depth: 1800 ft saltwater; 2400 ft freshwater RapidReturn™ Sonar Compatible: Yes     Transducer Cable Length: 50 ft Transducer Depth/Speed/Temperature: Depth, temperature Transducer Number of PINs: 8-pin Transducer Supported Deadrise/Transom Angles: 0° supports hull deadrise angles from 0° to 7° Housing Material: Stainless steel Normalized SKU: 0100293000UPC Code: 753759338459Garmin 010-02930-00 Literature Download Quick Reference Guide

Download LiteratureGarmin 010-02930-01 TransducersGT17M-THF SS Mid Band Chirp Transducer - 12° - 1kW - 8-PinDesigned for reduced drag and optimum sonar performance on fishing and cruising boats, this flush-mounted 1 kW mid-band CHIRP (80–165 kHz) transducer clearly defines fish arches, structure, and bottom depth returns on the display.Features: See maximum depth performance to 2,400’ in freshwater Access CHIRP sonar frequency range from 80–165 kHz Search with beamwidths of 9–18 degrees Count on fast-response water temperature sensing The thru-hull design offers flush installation with a 12-degree tilt Auto-ID enables simple plug-and-play operation Midband Chirp Traditional SonarThis 8-pin 1 kW stainless steel thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 1,800’ in saltwater and 2,400’ in freshwater.Broad Frequency RangeUse the perfect frequency for the waters in which users are fishing. Covering the medium frequency range, this transducer pulses from 80–165 kHz, displaying a wide coverage area, clear fish arches, and accurate depth readings.Optimum Ping SensitivityOffering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on the compatible chartplotter display.Thru-Hull InstallationA durable stainless steel housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.Auto-ID TechnologyEnjoy simple plug-and-play operation with Garmin auto-identification technology, which enables the sonar to automatically configure itself to the transducer being used.Fits Various Hull TypesConfigurable for a wide variety of boat hull materials, including fiberglass, composite, steel, aluminum, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–24 degrees without a fairing block.In the Box: GT17M-THF transducer Jam nut Spacer 2 washers 2 set screws Thread isolator Hull isolator Documentation Specifications: Transducer Frequency: Medium band CHIRP (80-165 kHz) Transducer Power: 1 kW Transducer Beamwidth: 9°-18° Transducer Maximum Depth: 1800 ft saltwater; 2400 ft freshwater RapidReturn™ Sonar Compatible: Yes     Transducer Cable Length: 50 ft Transducer Depth/Speed/Temperature: Depth, temperature Transducer Number of PINs: 8-pin Transducer Supported Deadrise/Transom Angles: 12° supports hull deadrise angles from 8° to 15° Housing Material: Stainless steel Normalized SKU: 0100293001UPC Code: 753759338466Garmin 010-02930-01 Literature Download Quick Reference Guide

Download LiteratureGarmin 010-02930-02 TransducersGT17M-THF SS Mid Band Chirp Transducer - 20° - 1kW - 8-PinDesigned for reduced drag and optimum sonar performance on fishing and cruising boats, this flush-mounted 1 kW mid-band CHIRP (80–165 kHz) transducer clearly defines fish arches, structure, and bottom depth returns on the display.Features: See maximum depth performance to 2,400’ in freshwater Access CHIRP sonar frequency range from 80–165 kHz Search with beamwidths of 9–18 degrees Count on fast-response water temperature sensing The thru-hull design offers flush installation with a 20-degree tilt Auto-ID enables simple plug-and-play operation Midband Chirp Traditional SonarThis 8-pin 1 kW stainless steel thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 1,800’ in saltwater and 2,400’ in freshwater.Broad Frequency RangeUse the perfect frequency for the waters in which users are fishing. Covering the medium frequency range, this transducer pulses from 80–165 kHz, displaying a wide coverage area, clear fish arches, and accurate depth readings.Optimum Ping SensitivityOffering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on the compatible chartplotter display.Thru-Hull InstallationA durable stainless steel housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.Auto-ID TechnologyEnjoy simple plug-and-play operation with Garmin auto-identification technology, which enables the sonar to automatically configure itself to the transducer being used.Fits Various Hull TypesConfigurable for a wide variety of boat hull materials, including fiberglass, composite, steel, aluminum, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–24 degrees without a fairing block.In the Box: GT17M-THF transducer Jam nut Spacer 2 washers 2 set screws Thread isolator Hull isolator Documentation Specifications: Transducer Frequency: Medium band CHIRP (80-165 kHz) Transducer Power: 1 kW Transducer Beamwidth: 9°-18° Transducer Maximum Depth: 1800 ft saltwater; 2400 ft freshwater RapidReturn™ Sonar Compatible: Yes     Transducer Cable Length: 50 ft Transducer Depth/Speed/Temperature: Depth, temperature Transducer Number of PINs: 8-pin Transducer Supported Deadrise/Transom Angles: 20° supports hull deadrise angles from 16° to 24° Housing Material: Stainless steel Normalized SKU: 0100293002UPC Code: 753759338473Garmin 010-02930-02 Literature Download Quick Reference Guide