00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 4-Degree Wedge for Power Mount #PM-W4-7
$92.37
$114.66
Seaview PM-W4-7 Mounting HardwareAccessories for Power Mounts, Poles and Masts4 Deg. Wedge 7" x 7" Specifications:Lean (FWD/Aft) = NONE Light/GPS Bracket = NONE Construction = NONESEAVIEW PM-W4-7 4 DEG WEDGE FOR 5-16 POWER MOUNTSNormalized SKU: PMW47UPC Code: 839662008907
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 4-Degree Wedge for Raymarine Open Arrays #RW4-4
$189.88
$241.16
Seaview RW4-4 Mounting HardwareRW4-4Radar Wedges Are Designed To Be Used Directly Between The Radome And The Mounting Surface. This Will Compensate For Deck Angle Or Planing Attitude Of The Boat. Compatible BrandsRaymarine Open Array Radars(Use directly between the open array and mounting surface) SEAVIEW RW4-4 4 DEGREE WEDGE F/ RAYMARINE OPEN ARRAYSNormalized SKU: RW44UPC Code: 839662002080
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5 Modular Mount 8 Vertical Round Base Plate #AM5-M1
$277.15
$352.00
Seaview AM5-M1 Mounting HardwareAM5-M1The 5" tall Seaview vertical mount is for Closed Dome Radars and small Satdomes (16" diameter or smaller), Thermal Cameras and Search lights. The oval hollow mast section allows for easy cable management. The small 8" round base plate foot print design is a great solution for limited space. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)*Features
Seaview Modular top plate required
Vertical profile
Heavy duty cast aluminum
Pre-drilled base for quick installation
Water tight base gasket provided
Base footprint of 8" round
Water tight Light or GPS bar option.
Flush mount plug provided if no light bar used
Specifications:Construction = NONE Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: AM5M1UPC Code: 839662009089
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5" Aft Leaning Mount with ADAR1 Top Plate #PMA57M1S2P
$413.36
$515.93
Download LiteratureSeaview PMA57M1S2P Radar Mount5" Aft Leaning Mount with ADAR1 Top PlateThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost-effective choice. Included ADAR1 Top PlateSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Normalized SKU: PMA57M1S2PUPC Code: 727908835588Seaview PMA57M1S2P Literature Download Quick Reference Guide
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5" Camera Mount for Sionyx #PM5SXN8
$374.26
$467.12
Seaview PM5SXN8 Mounting Hardware5" Vertical Camera Mount for SionyxGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Normalized SKU: PM5SXN8
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5" Camera Mount for Sionyx Black #PM5SXN8BLK
$374.26
$467.12
Seaview PM5SXN8BLK Mounting Hardware5" Vertical Camera Mount for Sionyx - BlackGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Normalized SKU: PM5SXN8BLKUPC Code: 850047035394
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5" Modular Mount Aft Raked 7" x 7" Base Plate #PMA-57-M1
$257.01
$326.42
Download LiteratureSeaview PMA-57-M1 Mounting HardwarePMA-57-M1The 5" tall Seaview aft leaning mount is for Open Array Radars, Closed Dome Radars and Satdomes. The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)*Features
Seaview Modular top plate required
20 degree leaning profile
Heavy duty cast aluminum
Pre-drilled base for quick installation
Water tight base gasket provided
Small footprint of 7"x 7"
Water tight Light or GPS bar option.
Flush mount plug provided if no light bar used
Specifications:Construction = NONE Lean (FWD/Aft) = AFT Light/GPS Bracket = NONENormalized SKU: PMA57M1UPC Code: 839662008952Seaview PMA-57-M1 Literature Download Quick Reference Guide Owners Manual
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5" Modular Mount Fwd Raked 7" x 7" Base Plate #PMF-57-M1
$257.01
$326.42
Seaview PMF-57-M1 Mounting HardwarePMF-57-M1The 5" tall Seaview forward leaning mount is for Open Array Radars, Closed Dome Radars and small Satdomes (16" diameter or smaller). The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)*Features
Seaview Modular top plate required
20 degree leaning profile
Heavy duty cast aluminum
Pre-drilled base for quick installation
Water tight base gasket provided
Small footprint of 7"x 7"
Water tight Light or GPS bar option.
Flush mount plug provided if no light bar used
Specifications:Construction = NONE Lean (FWD/Aft) = FWD Light/GPS Bracket = NONENormalized SKU: PMF57M1UPC Code: 839662008938
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5" Mount for M300 Series #PMA5FM37
$367.75
$458.99
Seaview PMA5FM37 Mounting HardwareSeaview PMA5FM37 5" MountModel: PMA5FM37Seaview 5" tall aft leaning mounts for thermal cameras and search lights. Powder coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7? x 7?.Normalized SKU: PMA5FM37UPC Code: 727908835526
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5" Searchlight Mount Vertical 8" Round Base Plate #PM5-SL-8
$374.26
$467.12
Seaview PM5-SL-8 Mounting Hardware5" Searchlight Mount Vertical - 8" Round Base PlateImprove your search lights performance with a Seaview Search Light Mount. This aft leaning mount will raise your Search Light 5.25". The 8" diameter base takes up very little space.Simple and Easy InstallationFour pre-drilled mounting holes at the base make for an easy installation. Search Light mounts using your own bolts and hardware.Cable ManagementThe hollow mast section provides plenty of room to run all the cabling.Small Base Foot PrintThis Seaview Search Light Mount is the perfect solution if you want to get the most out of your Search Light but are limited on space. Specifications:Construction = NONE Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: PM5SL8UPC Code: 839662004800
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5" Stainless Power Mount 7" x 7" Base #PMA-5-7LSS
$451.54
$563.57
Seaview PMA-5-7LSS Mounting Hardware5" Stainless Steel Power Mount - 7" x 7" Base - f/Garmin/Raymarine 3G/4G RadarIncludes ADA-R1 modular top plate.Seaview Stainless Steel Radar Mounts are 5" tall and aft leaning. The 7" x 7" base plate utilizes a small footprint, great for installations where space is limited. The body is made out of 316 stainless steel.This Seaview stainless steel mount is also light bar compatible with Seaview stainless steel light bars. The stainless steel light bars come pre-wired and are USCG approved for boats up to 20 meters (65.6 ft.) in length.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: PMA57LSSUPC Code: 839662005630
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5" Thermal Camera Mount for M or T Series Vertical #PM5-FMT-8
$389.16
$485.72
Seaview PM5-FMT-8 Navigation CamerasPM5-FMT-8The Seaview Thermal Camera Mount is a 5" vertical mount for FLIR M-Series or Raymarine T-Series. By raising the camera up off the mounting surface you get increased visibility. Cameras secure to the mount with no visible hardware for extra security and improved aesthetics. This camera mount has an 8" round base which is ideal if you have limited installation space. Note, that this fits the AMA-W (0-12 degree adjustable wedge). Normalized SKU: PM5FMT8UPC Code: 839662009300
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5" Thermal Camera Mount for M100 M200 FLIR #PM5-FMH-8
$389.16
$485.72
Seaview PM5-FMH-8 Mounting Hardware5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round BaseGet the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provides extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications:Light/GPS Bracket = NONE Lean (FWD/Aft) = NONE Construction = NONENormalized SKU: PM5FMH8UPC Code: 015568089824
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5.25" Aft Leaning Mount for Searchlights/Thermal #PMA5FSL7
$374.26
$467.12
Seaview PMA5FSL7 Mounting Hardware5.25" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base PlateSeaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.Cable ManagementA hollow oval mast section provides plenty of room for cable management.Space-Saving DesignThe small 7"x 7" base footprint makes this a great solution to an installation where space is an issue. Normalized SKU: PMA5FSL7UPC Code: 839662009348
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5.5" Thermal Camera Mount Aft Leaning #PMA5FMH7
$374.26
$467.12
Seaview PMA5FMH7 Mounting Hardware5.5" Thermal Camera Mount Aft Leaning for M100 & M200 SeriesGet the most out of your FLIR M100 and M200 Series Thermal Camera with Seaview's Aft-Leaning Camera Mount. Measuring 5.5" tall, the Seaview Aft-Leaning Camera Mount provides flexibility in any installation, especially when saving space is a top priority. Features:
5.5" Tall, Aft-Leaning Mount compatible with FLIR M100 and M200 Series Thermal Cameras
Elevates electronics for optimum performance and allows for flexibility in installation
Hollow, oval heavy-duty mast section supports mounted electronics and allows for convenient cable/wiring management
Pre-drilled, 7" x 7" base footprint allows for a simple and easy installation
Applications:FLIR M100, M200, M232 Thermal CamerasSpecifications:
Orientation: Aft-leaning
Material: Marine-grade aluminum
Finish: Powder coated white
Normalized SKU: PMA5FMH7
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 5.63" Vertical Searchlight Mount for RCL95 #PM5SL95
$358.44
$447.37
Download LiteratureSeaview PM5SL95 Mounting Hardware5.63" Vertical Searchlight Mount for RCL95 - 8" Round BaseplateGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your camera's view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Normalized SKU: PM5SL95UPC Code: 727908835649Seaview PM5SL95 Literature Download Quick Reference Guide Owners Manual
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 6-Degree Wedge for 7" x 7" Radar Mount Base Plate #PM-W6-7
$113.68
$141.12
Seaview PM-W6-7 Mounting HardwarePM-W6-7This 6° wedge goes between your Seaview mount and mounting surface. The base of the wedge is 7"x7" and is made from machined King Starboard . Utilize wedges to compensate for deck angle or planning attitude of the boat. Normalized SKU: PMW67UPC Code: 839662002325
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 6.38" Vertical Searchlight/Thermal Camera #PM5SL8
$374.26
$467.12
Download LiteratureSeaview PM5SL8 Mounting Hardware6.38" Vertical Searchlight & Thermal Camera Mount with 8" Round Base PlateGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your camera's view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation. Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics. Small Base FootprintThis mount is the perfect solution for installations where space is limited. Normalized SKU: PM5SL8UPC Code: 839662004800Seaview PM5SL8 Literature Download Quick Reference Guide
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 8' Radar Mast Pole Kit with 2 Strut Kits #RM848S
$1,615.20
Seaview RM848S Mounting Hardware8' Pole KitTransom Mounted Modular Radar Pole MountA 8' tall pole kit for radars and satdomes. Fits 3" diameter masts. Features a fixed top plate, adjustable base, pole & two 48" strut kits.Features:
8' tall pole
Fixed top plate
Adjustable base
Two 48" strut kits
**NON STOCK ITEM DROP SHIPS FROM MANUF. NO PROMO FREIGHT RATES*** Specifications:Construction = NONE Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: RM848SUPC Code: 839662009461
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview 8' Radar Mast Pole Kit with Strut and Standoff Kit #RM8148
$1,717.60
Seaview RM8148 Radar Dome8' Pole KitTransom Mounted Modular Radar Pole MountA 8' tall pole kit for radars and satdomes. Fits a 3" diameter mast. Comes complete with a fixed top plate, adjustable base, a 48" strut kit and one rail stand-off kit.Features:
Fits a 3" diameter mast
Features a fixed top plate
Adjustable base
48" strut kit & one rail stand-off kit
*Does NOT fit 24" JRC, Lowrance 2400 HD and Simrad DX64S**NON STOCK ITEM DROP SHIPS FROM MANUF. NO PROMO FREIGHT RATES*** Specifications:Construction = NONE Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: RM8148
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.