Vetus SET0090 ThrustersPropeller for BOW125/130/160Propeller 6 blade, diameter 246mm, for 125/130/160 kgf bow thrusters. Set includes all mounting hardware for propeller. Working in close collaboration with the Maritime Institute Netherlands (MARIN), the world-famous hydrodynamic laboratory, VETUS has optimized the performance of its thrusters. This has been achieved by utilizing a unique propeller blade profile, which creates little or no cavitation.As cavitation produces unwanted noise, this new blade design offers a major reduction in the operating sound levels for VETUS bow thrusters. Moreover, the application of this propeller has reduced the current consumption by up to 10%.*Zinc sold separately. Normalized SKU: SET0090UPC Code: 8717372264450

Vetus BOW6012D Thrusters Vetus BOW6012D Bow thruster 60 Kgf, 12 V, tunnel 185 mm diameter. Model: BOW6012D A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimizes cavitation noise The use of a flexible coupling between the tailpiece and motor eliminates vibration All VETUS systems use a streamlined tailpiece for optimum flow A strong synthetic propeller eliminates corrosion and reduces weight Systems are easy to install and supplied with clear installation and operation instructions VETUS systems use a new line of high-quality aluminum control panels which are interchangeable with older panels All VETUS maneuvering systems meet the EMC requirements Vetus bow thruster Provides On-off, port-starboard propulsion which allows the captain to turn the boat left or right without forward motion Includes reversible DC motor, solenoid set with cover, intermediate flange, streamlined bronze tail-piece, propeller, gaskets, and hardware Thrust Rating: 143 Pound-force, 65 Kilogram-force, 650 Newtons 3 kW / 4 HP power rating 12 volts DC operation 300 amps DC consumption 4 minutes maximum continuous operating time 4 minutes maximum operating time per hour Rated for 200 amp DC slow blow main fuse assembly P/N ZE200 and ZEHC100 (sold separately) Designed for use with 7-9/32 inch (185 mm) inside diameter thruster tunnels (sold separately) Bow thruster tunnels are available in either fiberglass, steel, or aluminum for corresponding boat hull Stern Applications require Stern Tunnels (STERN185P - sold separately) Unique propeller blade design and streamlined tailpiece provide optimum flow with minimal noise Requires additional components including a control panel, control panel connection cable, bow thruster tunnel or stern thruster housing, and battery cables with lugs to complete installation 49 lbs Replaces Vetus BOW6012A, BOW6012B, BOW6012C NOTE: This will also fit in the same tunnel as the BOW5012. Specifications Thrust (kgf) 65 Power (kW) 3 Internal tunnel diameter (mm) 185 Weight (kg) 17 Voltage (V) 12 Current consumption (A) 280 Continuous operating time (min) 5 Ignition protected No Proportional No Retractable No Extended runtime No Normalized SKU: BOW6012D

Vetus BP185G15 Thrusters 59 1/16 in. long fiberglass tube for installation of Vetus BOW6012D, BOW6024D, BOW7512D, BOW7524D, BOW9512D and BOW9524D thrusters in fiberglass hull boats. Vetus thruster tunnel 7 9/32 in. inside diameter (185 mm) 7 45/64 in. outside diameter (195.6 mm) 59 1/16 in. length (1500 mm) Made of glassfibre reinforced polyester For use with Vetus BOW6012D, BOW6024D, BOW7512D, BOW7524D, BOW9512D and BOW9524D bow thrusters Normalized SKU: BP185G15

Vetus BOW7524D ThrustersVetus BOW 75 24V tunnel thruster delivers 191 pounds of On-Off port-starboard propulsion which simplifies the docking of boats 34.4 to 49.2 feet (10.5-15 meters) in length, especially in strong winds or moving current. Vetus bow thruster Provides On-off, port-starboard propulsion which allows the captain to turn the boat left or right without forwarding motion Includes reversible DC motor, solenoid set with cover, intermediate flange, streamlined bronze tailpiece, propeller, gaskets, and hardware Thrust Rating: 180 Pound-force, 80 Kilogram-force, 800 Newtons 4.4 kW / 6 HP power rating 24 volts DC operation 315 amps DC current consumption 3 minutes maximum continuous operating time 3 minutes maximum operating time per hour Rated for 200 amp DC slow blow main fuse assembly P/N ZE355 and ZEHC100 (sold separately) Designed for use with 7-9/32 inch (185 mm) inside diameter thruster tunnels (sold separately) Bow thruster tunnels are available in either fiberglass, steel, or aluminum for the corresponding boat hull Stern Applications require Stern Tunnels (STERN185P - sold separately) Unique propeller blade design and streamlined tailpiece provides optimum flow with minimal noise Requires additional components including a control panel, control panel connection cable, bow thruster tunnel or stern thruster housing, and battery cables with lugs to complete installation 57 lbs Replaces Vetus BOW7524A, BOW7524B, BOW7524C Normalized SKU: BOW7524D

Vetus BOW9512C Thrusters Vetus BOW 95 12V tunnel thruster delivers 214 pounds of On-Off port-starboard propulsion which simplifies the docking of boats 39.4 to 55.8 feet (12-17 meters) in length, especially in strong winds or moving current. Vetus bow thruster Provides On-off, port-starboard propulsion which allows the captain to turn the boat left or right without forward motion Includes reversible DC motor, solenoid set with cover, intermediate flange, streamlined bronze tail piece, propeller, gaskets, and hardware Thrust Rating: 214 Pound-force, 95 Kilogram-force, 950 Newtons 5.7 kW / 8 HP power rating 12 volts DC operation 650 amps DC current consumption 3 minutes maximum continuous operating time 3 minutes maximum operating time per hour Rated for 425 amp DC slow blow main fuse assembly P/N ZE425 and ZEHC100 (sold separately) Designed for use with 7-9/32 inch (185 mm) inside diameter thruster tunnels (sold separately) Bow thruster tunnels are available in either fiberglass, steel, or aluminum for corresponding boat hull Stern Applications require Stern Tunnels (STERN185P - sold separately) Unique propeller blade design and streamlined tail piece provides optimum flow with minimal noise Requires additional components including a control panel, control panel connection cable, bow thruster tunnel or stern thruster housing, and battery cables with lugs to complete installation 66 lbs Replaces Vetus BOW9512A, BOW9512B, BOW9512C Normalized SKU: BOW9512C

Vetus BPA ThrustersAdapter Plate to Replace BPS/BPJ Panels with BPSE/BPJE PanelsAdapter plate for use when replacing old BPS/BPJ panels with updated BPSE/BPJE type panels. The updated panels are 85mm x 85mm, whereas the old style panels measured 98mm x 98mm. Normalized SKU: BPAUPC Code: 8717372241062

Vetus STM1006 Screws Allen screw M8x30 Fits M2.02 M2.04 M2.06 M2.C5 M2.D5/M3.09 Normalized SKU: STM1006

Vetus ALT5151W Hatches The Vetus Altus square hatch features dual-position adjusters that deliver smooth, intuitive operation—holding the lid securely at virtually any angle up to 90 degrees. Engineered for deck installation with inside or outside access, this white anodized frame combines practical ventilation capability with full watertight locking for marine environments demanding both flexibility and security. Adjusters Number: 2 Color: Smoke Gray Cut-Out Length: 20.1" Cut-Out Width: 20.1" External Size: 23" x 23" Handles Number: 2 Hinges Number: 2 Material: Aluminum With Hatch Lift: Yes Normalized SKU: ALT5151W

Vetus ALT4633SL Hatches The Vetus Altus lineup of hatches features a profile height of 13/16 inches and is equipped with adjustable hatch stay(s). This Altus 4633 rectangular hatch features external dimensions of 20-14/16 inches by 15-13/16 inches and cutout dimensions which measure 16-9/16 inches by 12-7/8 inches. Altus Deck Hatch, Type AII Normalized SKU: ALT4633SL

Vetus ALT5151SL HatchesALTUS Escape Hatch - OD 23-1/16" x 23-1/16"ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight. They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate.Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.An aluminum counter flange and a mosquito screen are available for these hatches.Features: External Dimensions -  23 1/16" x 23 1/16" Cut Out Dimensions - 19 15/16" x 19 15/16"  Number of Handles - 2 Normalized SKU: ALT5151SL

Vetus ALT6363SL Hatches The Vetus Altus lineup of hatches features a profile height of 13/16 inches and is equipped with adjustable hatch stay(s). This Altus 6363 square hatch features external dimensions of 27-5/8 inches by 27-5/8 inches and cutout dimensions which measure 24-11/16 inches by 24-11/16 inches. Normalized SKU: ALT6363SL

Vetus ALT4747SL Hatches The Vetus Altus lineup of hatches features a profile height of 13/16 inches and is equipped with adjustable hatch stay(s). This Altus 4747 square hatch features external dimensions of 21-7/16 inches by 21-7/16 inches and cutout dimensions which measure 18-1/2 inches by 18-1/2 inches. Normalized SKU: ALT4747SL

Vetus ALT2626SL HatchesALTUS Ventilation Hatch - OD 13-1/8" x 13-1/8"ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight.They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate.Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.An aluminum counter flange and a mosquito screen are available for these hatches.Features: External Dimensions -  13 1/8" x 13 1/8" Cut Out Dimensions - 10 1/4" x 10 1/4"  Number of Handles - 1 Normalized SKU: ALT2626SL

Vetus ASDV Exhaust Accessories Designed to prevent siphoning of marine cooling and plumbing systems. Vetus anti-siphon device with valve Stepped hose fittings fit 13 mm (33/64 inch), 19 mm (3/4 inch), 25 (1 inch), and 32 mm (1 17/64 inch) ID hose The air bleed connection rotates 360 degrees Synthetic housing material Silicone valve Normalized SKU: ASDV

Vetus ALTR420SL Hatches The Vetus Altus lineup of hatches features a profile height of 13/16 inches and is equipped with adjustable hatch stay(s). This Altus R420 round hatch features external diameter of 19-15/16 inches and cutout diameter which measures 16-7/16 inches. Normalized SKU: ALTR420SL

Vetus DINPX Windshield Wipers Black Wiper Single Arm  Length 473 to 559mm   Normalized SKU: DINPX