00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Gas Deck Fill No Vent Folding #S-1423NV
$82.23
$102.08
Whitecap S-1423NV Deck Fills
The Whitecap S-1423NV is a folding-cap gas deck fill with no vent, built for marine fuel systems that handle venting through a separate dedicated fitting. The folding cap is the defining feature here -- rather than a flip-top that stays attached at one side, the folding design folds flat against the deck when open, keeping it completely out of the way during fueling and reducing the chance of it catching on anything while the nozzle is in.
No vent means this is a pressurized fill. It is designed to work alongside a separate tank vent fitting, not replace one. If your boat does not have a dedicated vent, the vented version is the right call instead. If it does, the S-1423NV keeps things clean and simple.
The S-1423NV sits in the same Whitecap deck fill family as the S-4423 series but uses a different cap mechanism. The folding style tends to sit lower profile when open compared to a flip-top, which some installations prefer depending on the deck layout and how close the fill is to other hardware or the gunwale edge.
Cap style: folding
Vent: none (pressurized fill, no vent)
Application: marine gas deck fill
Use with a separate dedicated tank vent fitting
Normalized SKU: S1423NVUPC Code:
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Gas Deck Fill No Vent Straight #3823NVC
$62.30
$74.75
Whitecap 3823NVC Deck FillsWhitecap Gas Deck Fill No Vent Straight #3823NVCNormalized SKU: 3823NVC
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Gas Deck Fill No Vent Straight #S-4423NV
$169.73
$215.57
Whitecap S-4423NV Deck Fills
The Whitecap S-4423NV is a straight, 0-degree gas deck fill built from 316 stainless steel and designed to handle the demands of a marine environment without complaint. The sculpted flip-top cap gives it a clean, low-profile look on deck while keeping a positive seal when closed. No vent means this is a pressurized fill, so it pairs with fuel systems that manage venting separately.
316 stainless steel is the right call for anything living on a boat deck. It holds up to salt spray, UV exposure, and the general abuse that comes with life on the water far better than chrome-plated zinc or lower-grade stainless. The straight (0-degree) neck makes installation straightforward in applications where the deck surface is flat and the fuel tank fill neck runs directly below.
The flip-top cap design is a practical detail. It opens with one hand, stays out of the way while fueling, and snaps back down securely when you're done. No loose caps to lose overboard, no fumbling with a key or coin slot at the fuel dock.
Material: 316 stainless steel
Neck angle: 0-degree straight
Cap style: sculpted flip-top
Vent: none (pressurized fill, no vent)
Application: marine gas deck fill
Finish: polished stainless
Normalized SKU: S4423NVUPC Code: 725060442323
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Gas Deck Fill with Vent 30-Degree #3823A30C
$93.38
$115.92
Whitecap 3823A30C Deck FillsWhitecap Gas Deck Fill with Vent 30-Degree #3823A30CNormalized SKU: 3823A30C
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Gas Deck Fill with Vent 30-Degree #S-1423A30
$114.58
$142.24
Whitecap S-1423A30 Deck Fills
The Whitecap S-1423A30 is a 30-degree angled gas deck fill with an integrated vent and a folding cap, covering the two most common installation needs in one fitting. The 30-degree neck handles situations where a straight fill neck would force a sharp bend in the hose or create a misalignment between the deck fill location and the tank below. The angled neck gives the hose a natural routing path and reduces stress on the connection point.
The integrated vent means this fill handles both fueling and vapor venting in one fitting, making it the right choice for boats that do not have a separate dedicated tank vent. Fuel vapors escape through the vent during filling rather than building pressure in the tank, which keeps the fueling process smooth and safe. If your system already has a dedicated vent, the no-vent S-1423A30NV is the better fit.
The folding cap folds flat against the deck when open, keeping a low profile during fueling and staying completely clear of the fill nozzle. When closed, it seals the opening and sits flush with the deck surface. The cap stays attached to the fill body at all times, so there is nothing to lose overboard.
Cap style: folding
Neck angle: 30-degree
Vent: integrated (vented fill)
Application: marine gas deck fill
Suitable for fuel systems without a separate dedicated vent fitting
Normalized SKU: S1423A30
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Gas Deck Fill with Vent 30-Degree #S-4423A30
$201.25
$255.61
Whitecap S-4423A30 Deck Fills
The Whitecap S-4423A30 is a 30-degree angled gas deck fill with a built-in vent, constructed from 316 stainless steel. It is the vented counterpart to the S-4423A30NV, and the distinction matters. If your fuel system does not have a separate dedicated vent fitting, this is the version you want. The integrated vent allows fuel vapors to escape during filling, which keeps pressure from building up in the tank and makes the fueling process smoother and safer.
The 30-degree neck angle gives you flexibility during installation. When the deck is not flat above the tank, or when the fill hose needs to make a turn right out of the gate, the angled neck reduces stress on the hose and makes routing cleaner. Pair that with 316 stainless steel construction and a sculpted flip-top cap, and you have a deck fill that handles the job without adding maintenance to your list.
The flip-top cap opens with one hand and snaps back down securely when closed. No loose cap to chase across the deck at the fuel dock. The polished stainless finish holds up to salt, fuel spills, and sun exposure without pitting or staining under normal use.
Material: 316 stainless steel
Neck angle: 30-degree
Cap style: sculpted flip-top
Vent: integrated (vented fill)
Application: marine gas deck fill
Finish: polished stainless
Normalized SKU: S4423A30UPC Code: 725060442330
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Gas Deck Fill with Vent Straight #3823C
$91.81
$113.98
Whitecap 3823C Deck FillsWhitecap Gas Deck Fill with Vent Straight #3823CNormalized SKU: 3823C
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Gas Deck Fill with Vent Straight #S-1423C
$115.29
$143.12
Whitecap S-1423C Deck Fills
The Whitecap S-1423C is a straight, vented gas deck fill with a folding cap, designed for marine fuel systems that do not have a separate dedicated vent fitting. The integrated vent allows fuel vapors to escape during filling, which prevents pressure buildup in the tank and makes the fueling process go smoothly. If your boat relies on the deck fill to handle venting, this is the version you want over the no-vent S-1423NV.
The straight (0-degree) neck runs directly down from the deck surface, making it the right fit when the tank fill neck sits directly below without any offset or angle. Installation is clean and straightforward in that configuration, with no need to work around a bent neck or angled hose routing.
The folding cap design folds flat against the deck when open, keeping it out of the way during fueling and reducing the profile compared to a raised flip-top. When closed, it seals the fill opening and sits flush with the surrounding deck surface. The cap stays attached to the fill body, so there is nothing to lose overboard at the fuel dock.
Cap style: folding
Neck angle: 0-degree straight
Vent: integrated (vented fill)
Application: marine gas deck fill
Suitable for fuel systems without a separate dedicated vent fitting
Normalized SKU: S1423C
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Gas Deck Fill with Vent Straight #S-4423
$199.51
$253.40
Whitecap S-4423 Deck Fills
The Whitecap S-4423 is the straight, vented version of Whitecap's 316 stainless steel flip-top gas deck fill. The 0-degree neck runs straight down, making it the right fit when your deck is flat and the tank fill neck sits directly below without any offset. The integrated vent is built into the fill body, so fuel vapors have a path out during fueling without needing a separate vent fitting elsewhere in the system.
That built-in vent is worth paying attention to when spec'ing your fuel system. On boats without a dedicated tank vent, this fill handles both jobs cleanly. On systems that already have a vent, the no-vent version (S-4423NV) is the better call to avoid over-venting. If you are not sure which your boat uses, check the fuel tank before ordering.
Construction is 316 stainless steel throughout, which holds up to salt air, fuel exposure, and deck traffic without corroding or pitting. The sculpted flip-top cap opens with one hand and snaps shut firmly. It stays put underway and does not rattle loose over time the way threaded caps sometimes do.
Material: 316 stainless steel
Neck angle: 0-degree straight
Cap style: sculpted flip-top
Vent: integrated (vented fill)
Application: marine gas deck fill
Finish: polished stainless
Normalized SKU: S4423UPC Code: 725060442323
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Gas Hose Deck Fill with Splash Guard 1-1/2" Chain #6001
$68.27
$81.92
Whitecap 6001 Deck FillsGas Fill, 1-1/2" Hose w/ Splash Shield WHITECAP GAS HOSE DECK FILL W/ SPLASH GUARD W/ CHAIN 1-1/2"Normalized SKU: 6001
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Half Circle Flush Push Pole Holder #PH-2
$30.83
$36.80
Whitecap PH-2 Storage Clips
Half Circle Flush Push Pole Holder
4 3/4 in. long
2 1/2 in. wide
1 3/16 x 3 1/2 in. cut out
1/4 in. (4) fastener
304 stainless steel/black nylon
Normalized SKU: PH2UPC Code: 725060007416
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Hammock Hook #S-0182C
$0.37
$0.44
Whitecap S-0182C Hooks & SnapsWhitecap's S-0182C Stainless Steel Hammock Hook is made from high quality marine-grade materials. Built for durability and longevity. Designed for quick and simple installation.
Stainless steel construction
Hook Length: 1/2"
Hook Width: 1-1/4"
Hook Depth: 3/4"
Fastener: #8 (2)
Normalized SKU: S0182CUPC Code: 725060018214
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Hatch Cover Pull 1-1/4" 304 Stainless #S-229C
$9.52
$11.36
Whitecap S-229C Handles & PullsHatch Cover Pull
Diameter:1-1/4"
Shaft:3/16" x 2"
Material:304 Stainless Steel
Normalized SKU: S229CUPC Code: 725060022914
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Hatch Hinge 2-5/8" x 3-1/8" Chrome Plated Brass #S-990C
$25.59
$30.54
Whitecap S-990C Door Latches & HingesStandard Hatch HingeSize:2-5/8" x 3-1/8"Fastener: #10(7)Material: Chrome Plated Brass Normalized SKU: S990CUPC Code: 725060990015
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Hatch Hinge 2-5/8" x 3-1/8" Polished Brass #S-990BC
$26.27
$31.36
Whitecap S-990BC Door Latches & HingesStandard Hatch HingeSize:2-5/8" x 3-1/8"Fastener: #10(7)Material: Polished Brass Normalized SKU: S990BCUPC Code: 725060990039
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Hatch Hinge 3" x 2-1/2" 316 Stainless #6027C
$4.37
$5.14
Whitecap 6027C Door Latches & HingesStandard Hatch HingeSize:3" x 2-1/2"Fastener: #10(8)Material: 316 Stainless Steel Normalized SKU: 6027CUPC Code: 725060602710
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Hatch Hinge Angled Base 3" x 2-1/2" 316 Stainless #6211C
$52.50
$63.00
Whitecap 6211C Door Latches & HingesAngled Base Hatch HingeSize:3" x 2-1/2"Fastener: #10(8)Material: 316 Stainless Steel Normalized SKU: 6211CUPC Code: 725060621117
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Hawse Pipe 1-1/2" x 3-3/4" 316 Stainless #6223C
$59.03
$70.83
Whitecap 6223C Bow Chocks & Deck PipesHawse PipeInner Hole: 1-1/2" x 3-3/4"Flange: 5-1/2" x 2-1/2"Fastener:#10(2)Pipe Depth:7/8"Material: 316 Stainless Steel Normalized SKU: 6223CUPC Code: 725060622312
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Hawse Pipe 4" x 2" 316 Stainless #6128C
$62.64
$75.17
Whitecap 6128C Bow Chocks & Deck PipesHawse Pipe - 316 Stainless Steel - 4" x 2"
316 S.S. Hawse Pipe
Interior Hole: 4" x 2"
Pipe Depth: 1-1/8"
Flange: 6-1/2" x 3-3/8"
Fastener: #10 (3)
Weight: 21.5 oz.
Material: 316 Stainless Steel
Fastener: #10 (4)
Normalized SKU: 6128CUPC Code: 725060612818
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Hawse Pipe 4-3/4" x 2-3/4" 316 Stainless #6349
$124.99
$155.16
Whitecap 6349 Bow Chocks & Deck PipesHawse PipeInner Hole: 4-3/4" x 2-3/4"Flange: 8" x 5"Fastener:#10(3)Pipe Depth:1-3/4"Material: 316 Stainless Steel Normalized SKU: 6349
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.