Navpod GP1040 Display Mounts PART #: GP1040 Description: Uncut (usable face = 17.5"w x 7.375"h) W x H x D: 20.25" x 9.5" x 6.125" NavPod Protects Your Electronics In Harsh ConditionsUn-Cut NavPods are for you to choose your own layout or for mounting electronics that NavPod doesn't provide a Pre-Cut for. The face of the NavPod can easily be cut with a "Rotozip". It's a small handheld router style cutter that shreds the material while cutting. This eliminates any melting of the plastic material. It is also important to note that when selecting a possible Un-cut NavPod, the depth measurement stated in the chart is overall outside measurement. Actual internal clearance can be reduced by curvature from the design or molded indents for the mounting system. This can reduce the overall and needs to be considered when making a determination of actual available depth clearance.Watertight Silicone SealKeeps rain and salt water spray off electrical connections on the back of electronicsTamperproofSpecial fasteners and wrench are included that provide security and convenience to leave electronics on-boardConcealed WiringNo loose wires are exposed to corrosion and UV damageClean InstallationThe clean look of flush mounting. Mount your display where you can best see and reach it.Pre-Cut ModelsCome with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit. Specifications:Mounting Style = NONE Usable Face = NONE Cut/Uncut = NONENAVPOD GP1040 UNCUT USABLE FACE 17.5W X 7.5 HNormalized SKU: GP1040UPC Code: 659988102574

Navpod GP1060 Display MountsGP1060 Uncut Flush FrontUncut - Flush Front (usable face = 13.75"w x 10.75"h). Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (16.75"w x 13"h x 6.5"d) Specifications:Mounting Style = NONE Usable Face = NONE Cut/Uncut = NONENAVPOD GP1060 RADAR/CHART UNCUT USABLE FACE 14W X 10.5 HNormalized SKU: GP1060UPC Code: 659988102703

Navpod GP1170 Display Mounts PART #: GP1170 Description: Uncut (usable face = 20.77"w x 9.64"h) W x H x D: N/A NavPod Protects Your Electronics In Harsh ConditionsUn-Cut NavPods are for you to choose your own layout or for mounting electronics that NavPod doesn't provide a Pre-Cut for. The face of the NavPod can easily be cut with a "Rotozip". It's a small handheld router style cutter that shreds the material while cutting. This eliminates any melting of the plastic material. It is also important to note that when selecting a possible Un-cut NavPod, the depth measurement stated in the chart is overall outside measurement. Actual internal clearance can be reduced by curvature from the design or molded indents for the mounting system. This can reduce the overall and needs to be considered when making a determination of actual available depth clearance.Watertight Silicone SealKeeps rain and salt water spray off electrical connections on the back of electronicsTamperproofSpecial fasteners and wrench are included that provide security and convenience to leave electronics on-boardConcealed WiringNo loose wires are exposed to corrosion and UV damageClean InstallationThe clean look of flush mounting. Mount your display where you can best see and reach it.Pre-Cut ModelsCome with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit. Specifications:Mounting Style = NONE Usable Face = NONE Cut/Uncut = NONENAVPOD GP1170 UNCUT USABLE FACE 20W X 9.875HNormalized SKU: GP1170UPC Code: 659988102741

Navpod GP1800 Display MountsGP1800 SailPod Uncut f/9.5" Wide GuardGP1800 Series for 9.5" Guard, SailPods are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.Features: Hi-Gloss material Waterproof seal Commitment to quality Normalized SKU: GP1800UPC Code: 659988106855

Navpod SP2OONS Display MountsNAVPOD SP200NS SpeakerPodModel: SP200NSSpeakerPod Housing fits Bose Environmental SE151 (speakers not included)(Pair)SpeakerPods are designed for surface mounting your Bose 151 speakers under sternrail seats. SpeakerPods keep your boat speakers safe from outside elements and theft.Normalized SKU: SP2OONSUPC Code: 659988105209

NavPod SP200NS Display MountsSP200NS SpeakerPod Housing for Bose Environmental SE151 SpeakersThe NavPod SpeakerPod is used for mounting Bose Environmental SE151 speakers under stern-rail seats on sailboats or overhead mounting on powerboats. The SpeakerPod is a effective way to mount your speakers. Keeping them safe from the elements, allowing you to enjoy music wherever you travel. SpeakerPods Include: Acrylic capped ABS plastic Stainless steel mounting hardware *Speakers are NOT included, SpeakerPods are sold in pairs of two. Specifications:Cut/Uncut = NONE Mounting Style = NONE Usable Face = NONENormalized SKU: SP200NSUPC Code: 659988105209

NavPod SS125-REC-KIT Mounting HardwareStainless Steel Feet for 1.25″ Diameter AngleGuards or Stanchion Kits (Rectangular Base) with HardwareStainless Steel Feet Pair Kit — compatible with all 1.25″ diameter AngleGuards or Stanchion Kits.All 1.25″ diameter AngleGuards and Stanchion Kits come with a pair of feet (rectangular base for AngleGuards, round base for Stanchion Kits), so it is not necessary to purchase this kit if you are already purchasing a 1.25″ diameter AngleGuard or Stanchion Kit.This kit includes: 2 stainless steel feet 316-grade stainless steel Mirror polished finish Rectangular base with footprint dimensions of 3-1/4″ x 1-7/8″ Eight mounting screws (#14 x 1″ Phillips Oval Head) Allen wrench for included foot set screws Normalized SKU: SS125RECKIT

Navpod SK135 Display MountsStanchion Kit SK135 - For All SailPods & Most SystemPodsGreat for overhead mounting on Powerboats or extending the available dash space on the flybridge. Useful for unique mounting locations in the cockpit on Sailboats.Includes two 1.25" Stainless Steel tubes with 15° bends pre-drilled for mounting 9.5" or 12" SailPods or SystemPods on a flat surface (does not fit GP1500/GP2500 Series or GP1600/GP2600 Series SystemPods).Stanchion Kit includes: 1.25" diameter 316 stainless steel Mirror polished finish Pre-drilled mounting and wire access holes Stainless steel feet can be removed for adjusting the height Specifications:Mounting Style = NONE Usable Face = NONE Cut/Uncut = NONENAVPOD SK135 STANCHION KIT 1.25" FOR TRADITIONAL & GPNormalized SKU: SK135UPC Code: 659988101171

Navpod SK100 Display MountsPart #: SK100Description: Stanchion KitNavPod Protects Your Electronics In HarshConditionsStanchion Kit 1"For use with NP120/NP121/NP131RA/GP140/GP141 Specifications:Mounting Style = NONE Usable Face = NONE Cut/Uncut = NONENAVPOD SK100 STANCHION KIT 1" Normalized SKU: SK100UPC Code: 659988102932

NavPod SK11 Display MountsStanchion Kit Predrilled for GP1300, GP1400 Series InstrumentPods, GP1500, GP1600 & GP1040 Series SystemPods & GP1800 Series SailPodsSK11 Stanchion Kit is used for mounting GP1300, GP1400 Series InstrumentPods, GP1500, GP1600 and GP1040 Series SystemPods and GP1800 Series SailPods. It measures 11″ inch high, 1.25″ diameter stainless steel tube, predrilled to accommodate above listed products. The SK11 Stanchion Kit can be combined with most InstrumentPods or SystemPods and some SailPods for a very strong and sturdy mounting system. Great for on dash mounting on Powerboats or extending the available dash space on the flybridge. Can be used for overhead mounting as well. However, if interest in overhead mounting see SK125, SK129, or SK130 Stanchion Kits. Useful for unique mounting locations in the cockpit on Sailboats. Two 1.25″ stainless steel strait tubes. Includes pair of round stainless steel feet. They are polished and predrilled to easily fit together with the NavPod. Wires can be routed down both tubes and are all concealed for a very clean installation. Specifications:Cut/Uncut = NONE Mounting Style = NONE Usable Face = NONENormalized SKU: SK11UPC Code: 659988113570

Watch VideoNavPod SP212-H Antenna MountsStarPod Housing Only for Starlink Roam/RV Antenna - Base Not IncludedThe StarPod from NavPod is a waterproof housing designed for permanent mounting of the Starlink Roam/RV antenna, typically on a yacht’s hardtop or radar arch. The StarPod housing fits Starlink model UTA-212 (dish face measuring 20.2” x 11.9” / 513 mm x 303 mm).NavPod model SP212-H includes the StarPod housing only and is intended for installations where the housing will be mounted on an existing or third-party pedestal. A compatible pedestal should have an upper mounting surface no larger than a 7.5” diameter circle, which is the available mounting surface on the bottom of a StarPod housing.Third-Party Accessory Disclaimer:The NavPod and StarPod brands are in no way affiliated with the Starlink or SpaceX brands. The company's products are third-party accessories, distinct from the brands and products they are designed to house.What are the benefits of mounting a Starlink dish in a StarPod?StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Testing has proven that there is no degradation of signal inside the thermoformed acrylic-capped ABS housing.The Starlink Roam dish was originally designed for RVs, not boats. Its waterproof rating of IP54 is a long way from the IP67 rating NavPod is accustomed to in boating from the likes of Garmin, Raymarine, and others. Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other marine electronics for over 25 years.How do I mount a Starlink dish inside a StarPod?The 4-legged "X" base that comes with a Starlink Roam dish is not utilized when mounting inside a StarPod; only the dish and attached mounting pole are used. The center post of the Starlink dish is inserted through the center hole in the bottom of the StarPod and extends into the chosen mounting pedestal.The initial Starlink setup process should be completed before mounting the dish inside a StarPod (refer to your Starlink setup and installation guide for this process). One important thing to note during the setup process is to make sure that the "Snow Melt" setting in the Starlink app is turned to "Off" (this feature produces excess heat to keep snow from piling up on a Starlink dish in winter environments, but is unnecessary and can potentially cause overheating when the dish is mounted inside a housing).Once the initial Starlink setup process is complete, the next step is to get the dish into a horizontal, or "flat" position, perpendicular to the mounting post. To get the dish into this position, unplug the Starlink dish, then plug it back in and turn it on. The dish will begin to move as part of its startup process, so just wait until it’s in a horizontal position and unplug the dish. This may take a couple of attempts, so just repeat as necessary until the dish is powered off in a horizontal or "flat" position. At this point, the dish can now be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod).How can the Starlink dish move if it’s inside a StarPod?It can’t, but that’s okay. When powered on inside the StarPod housing, the Starlink dish will initially move as it looks for a signal. However, when the dish bumps into the inside of the housing and is unable to move any further, it will simply register an obstruction and discontinue its movement (a feature builtinto the dish to prevent the motor from burning out when it’s positioned next to a tree branch, ceiling, or other obstruction). The StarLink app may notify you of the obstruction, but the dish will continue to operate normally otherwise.There are several methods you can find on the internet for disabling your Starlink motor to achieve a fixed position. While these methods can be effective, it’s important to note that any modification of your Starlink antenna (drilling or cutting into the case, disconnecting internal cables, or any disassembly at all) will void the product warranty.If the Starlink dish can’t move, how can it get a good signal?Short Answer: A Starlink dish installed on a boat in a fixed horizontal position will achieve the same signal quality as a dish that’s free to move and adjust position.Long Answer: The Starlink Roam dish utilizes phased array technology. Rather than searching for a single satellite to point to (like older 18" and 24" satellite TV antennas), the Starlink dish is continuously switching between different satellites every few minutes (satellites that are moving at very high speeds and orbiting much lower than traditional TV and internet satellites). When a Starlink dish moves, it isn’t trying to point toward a particular satellite; it’s just looking for a clear view of the sky. Since this dish was originally designed for RV use, the movement of the dish was designed to allow it to point away from overhead obstructions like trees and buildings that might prevent a clear view of the sky. While this functionality makes sense for RV use, it is much less functional for boating use, where the dish would almost never encounter any overhead obstructions.When testing, a Starlink dish mounted and immobilized inside a StarPod achieved the same signal quality and internet speed as a dish that was free to move outside of a housing. Neither the fixed horizontal positioning nor the housing material itself resulted in any signal degradation as long as the dish had an otherwise clear view of the sky (as it typically would on a floating vessel).Liability Disclaimer:NavPod assumes no liability for any violation of Starlink product warranty or terms of service that may result from modifying a Starlink dish or mounting it inside a StarPod.General Information:StarPod is manufactured by Ocean Equipment in Bend, Oregon, USA, using the same time-proven materials that are used to fabricate the popular line of NavPods, waterproof housings for marine electronics.All NavPods Feature:Structural Rigidity – The Gen3 enhancements now include a thicker gauge of acrylic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All NavPods are manufactured with a double gasket system, providing an excellent watertight seal. This seal provides the best protection for your marine electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel – The company uses all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets to match the NavPod wrench for better holding ability when tightening. The nickel-chrome-plated stainless steel tamper-resistant screws provide security combined with a little style!Commitment to Quality – Navpod stands behind its commitment by offering a 10-year warranty on all new NavPods, including the StarPod. Normalized SKU: SP212HNavPod SP212-H Video

Watch VideoNavPod SP212-K Antenna MountsStarPod Kit for Starlink Roam/RV Antenna - Housing & BaseThe StarPod from NavPod is a waterproof housing designed for permanent mounting of the Starlink Roam/RV antenna, typically on a yacht’s hardtop or radar arch. The StarPod housing fits Starlink model UTA-212 (dish face measuring 20.2” x 11.9” / 513 mm x 303 mm).NavPod model SP212-K is the StarPod Kit, which includes the StarPod housing and a black powder-coated aluminum base. The included base is 8.25" tall with a 4" outer diameter and has a 6" circular footprint with four screw mounting holes.Third-Party Accessory Disclaimer:The NavPod and StarPod brands are in no way affiliated with the Starlink or SpaceX brands. The company's products are third-party accessories, distinct from the brands and products they are designed to house.What are the benefits of mounting a Starlink dish in a StarPod?StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Testing has proven that there is no degradation of signal inside the thermoformed acrylic-capped ABS housing.The Starlink Roam dish was originally designed for RVs, not boats. Its waterproof rating of IP54 is a long way from the IP67 rating NavPod is accustomed to in boating from the likes of Garmin, Raymarine, and others. Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other marine electronics for over 25 years.How do I mount a Starlink dish inside a StarPod?The 4-legged "X" base that comes with a Starlink Roam dish is not utilized when mounting inside a StarPod; only the dish and attached mounting pole are used. The center post of the Starlink dish is inserted through the center hole in the bottom of the StarPod and extends into the chosen mounting pedestal.The initial Starlink setup process should be completed before mounting the dish inside a StarPod (refer to your Starlink setup and installation guide for this process). One important thing to note during the setup process is to make sure that the "Snow Melt" setting in the Starlink app is turned to "Off" (this feature produces excess heat to keep snow from piling up on a Starlink dish in winter environments, but is unnecessary and can potentially cause overheating when the dish is mounted inside a housing).Once the initial Starlink setup process is complete, the next step is to get the dish into a horizontal, or "flat" position, perpendicular to the mounting post. To get the dish into this position, unplug the Starlink dish, then plug it back in and turn it on. The dish will begin to move as part of its startup process, so just wait until it’s in a horizontal position and unplug the dish. This may take a couple of attempts, so just repeat as necessary until the dish is powered off in a horizontal or "flat" position. At this point, the dish can now be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod).How can the Starlink dish move if it’s inside a StarPod?It can’t, but that’s okay. When powered on inside the StarPod housing, the Starlink dish will initially move as it looks for a signal. However, when the dish bumps into the inside of the housing and is unable to move any further, it will simply register an obstruction and discontinue its movement (a feature builtinto the dish to prevent the motor from burning out when it’s positioned next to a tree branch, ceiling, or other obstruction). The StarLink app may notify you of the obstruction, but the dish will continue to operate normally otherwise.There are several methods you can find on the internet for disabling your Starlink motor to achieve a fixed position. While these methods can be effective, it’s important to note that any modification of your Starlink antenna (drilling or cutting into the case, disconnecting internal cables, or any disassembly at all) will void the product warranty.If the Starlink dish can’t move, how can it get a good signal?Short Answer: A Starlink dish installed on a boat in a fixed horizontal position will achieve the same signal quality as a dish that’s free to move and adjust position.Long Answer: The Starlink Roam dish utilizes phased array technology. Rather than searching for a single satellite to point to (like older 18" and 24" satellite TV antennas), the Starlink dish is continuously switching between different satellites every few minutes (satellites that are moving at very high speeds and orbiting much lower than traditional TV and internet satellites). When a Starlink dish moves, it isn’t trying to point toward a particular satellite; it’s just looking for a clear view of the sky. Since this dish was originally designed for RV use, the movement of the dish was designed to allow it to point away from overhead obstructions like trees and buildings that might prevent a clear view of the sky. While this functionality makes sense for RV use, it is much less functional for boating use, where the dish would almost never encounter any overhead obstructions.When testing, a Starlink dish mounted and immobilized inside a StarPod achieved the same signal quality and internet speed as a dish that was free to move outside of a housing. Neither the fixed horizontal positioning nor the housing material itself resulted in any signal degradation as long as the dish had an otherwise clear view of the sky (as it typically would on a floating vessel).Liability Disclaimer:NavPod assumes no liability for any violation of Starlink product warranty or terms of service that may result from modifying a Starlink dish or mounting it inside a StarPod.General Information:StarPod is manufactured by Ocean Equipment in Bend, Oregon, USA, using the same time-proven materials that are used to fabricate the popular line of NavPods, waterproof housings for marine electronics.All NavPods Feature:Structural Rigidity – The Gen3 enhancements now include a thicker gauge of acrylic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All NavPods are manufactured with a double gasket system, providing an excellent watertight seal. This seal provides the best protection for your marine electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel – The company uses all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets to match the NavPod wrench for better holding ability when tightening. The nickel-chrome-plated stainless steel tamper-resistant screws provide security combined with a little style!Commitment to Quality – Navpod stands behind its commitment by offering a 10-year warranty on all new NavPods, including the StarPod. Normalized SKU: SP212KNavPod SP212-K Video

Download LiteratureNavPod SP3000 Mounting HardwareStarPod 3 System for Starlink Gen3 Standard Dish (23.04 x 15.07″ Dish Size)*Starlink Dish NOT INCLUDEDThe StarPod 3 System is a waterproof, secure, attractive mounting solution for your Starlink Gen3 Standard antenna. The housing features a built-in 10-degree angle and full swivel adjustability so that the dish can be manually adjusted for an optimized view of Starlink satellites in the sky. The 10-degree angle also prevents water from pooling on top of the housing, which can cause signal interference.Note: Assembly of this product requires the use of a deck fill wrench (Groco model SW-2531 or equivalent product). This tool is NOT included with the StarPod.What are the benefits of mounting a Starlink dish in a StarPod?StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Our testing has proven that there is no degradation of the signal while inside the thermoformed acrylic-capped ABS housing.Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other Marine Electronics for over 25 years.Features: Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform the pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for matching to the NavPod wrench for better holding ability when tightening. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods, including the StarPod. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: SP3000NavPod SP3000 Literature Download Quick Reference Guide

NavPod SG225 Display MountsSG225 StraightGuard 12" Wide 1.25" Straight Tube Diameter12" wide StraightGuards with no bends are designed to fit a single InstrumentPod. StraightGuards are available in 1.25" diameter stainless steel tubing. This model is commonly used when upgrading a pedestal guard on a Lewmar (Whitlock) system.All StraightGuards Include: 316 grade stainless steel .065 gauge wall thickness Mirror polished finish All 1.25" include stainless steel feet Specifications:Usable Face = NONE Mounting Style = NONE Cut/Uncut = NONENormalized SKU: SG225UPC Code: 659988105490

NavPod SG125 Display MountsSG125 Straightguard 9.5" Wide 1.25" Straight Tube Diameter9.5" wide StraightGuards with no bends are designed to fit a single InstrumentPod. StraightGuards are available in 1" or 1.25" diameter stainless steel tubes. This model is commonly used when upgrading a pedestal guard on an Edson steering system and some Lewmar (Whitlock) systems.All StraightGuards Include: 316 grade stainless steel .065 gauge wall thickness Mirror polished finish All 1.25" include stainless steel feet (1" does not include feet) Specifications:Cut/Uncut = NONE Mounting Style = NONE Usable Face = NONENormalized SKU: SG125UPC Code: 659988103373

NavPod NPT2000 Display MountsSuperSailPod Uncut f/4 Instruments & Up To A 9" MFD f/12" Wide GuardSuper SailPod Series is used for mounting 8" and 9" Chartplotters plus 4 instruments. The Super SailPod needs an angle flat length of at least 15"All SailPod's Include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners and wrench Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Sizing Chart:Top Usable Face: 9"H x 13"W x 5.25"D Max Cut-Out: 9"H x 10.5"W Bottom: Usable Face: 4.5"H x 20.25"W x 2.5"D Max Cut-Out: 4.5"H x 20.25"W This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: NPT2000UPC Code: 659988105193