Watch VideoPowermania 57101 Battery ChargersTurbo M106E - Single Bank Waterproof Onboard Charger - 12V DC - 6 AmpThe Turbo M106E is compact, feature-packed, and epoxy-potted for true, long-term waterproof. This is a true 3-stage automatic charger that has built-in battery type selector which allows user to charge 12V Lead-Acid, AGM, or GEL batteries to their fullest capacities. This is an ideal small charger for recharging 12V battery system up to 72 Ah capacity.3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Battery Type SelectorTurbo M allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "Safe Charge Mode". The Safe Charge Mode is to be used when the user is unable to identify the type of battery in use.PrewiredTurbo M charger is prewired with DC output cables (ring terminals). Each cable is equipped with safety inline fuses.Over-Voltage ProtectionIf the charger is protected from over-voltage. If it detects voltage of 16V DC or higher from its connected battery, the charger will shut off due to abnormality.Over-Current ProtectionThe Charger limits itself to its maximum current output capacity. If a defective battery or its connected devices try to draw larger-than-provided current from the charger, the charger will not yield current exceeding its maximum output.Ignition ProtectionThe charger is encapsulated to eliminate any internal spark from igniting external surroundings. Internal spark could be potentially generated by misuse or component failure.Reverse Polarity ProtectionThe Charger is equipped with safety fuses on its output cables. If a user incorrectly connects a positive output cable to a battery_s negative terminal and vice versa, the fuse will be blown and thus disconnects the charger and the battery. When replacing blown fuses, please use spare fuses provided with the charger or use same rating and size fuses.Short Circuit ProtectionShort Circuit Protection feature protects charger from sudden burst of excessive high current caused when any positive output ring gets in contact with one of the negative output rings.Overheat ProtectionIf the charger detects its ambient temperature higher than the safety threshold, it will shut off to protect the charger from overheat damage. Once the ambient temperature returns to normal, the charger will automatically turn itself on again.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 100 - 120V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 2.0 Amps Total Output Current: 6 Amps Output Voltage / Bank: 13.5 - 14.7V DC Number of Output Bank: 1 (Prewired) Output Voltage Configuration: 12V DC Efficiency: 78% Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float) Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Maximum Absorption Time: 5 hours Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 5' AC Power Cord Length: 5' Dimension: 6.5" x 4.5" x 2.5" Weight: 4.7lb Recommended Battery Capacity: up to 72 Ah LED Indicatior:PowerCharge StatusOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class AIP65 (Splash Proof)Constructed in accordnce to Marine UL 1236 Specifications:Amps - Output = 6 Amp Amps Per Bank = 6 Banks = 1 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 100/120V Voltage - Output (Volts) = 12VNormalized SKU: 57101UPC Code: 859321002107Powermania 57101 Video

  Watch VideoPowermania 57102 Battery ChargersTurbo M108E - Single Bank Waterproof Onboard Charger - 12V DC - 8 AmpThe Turbo M108E is compact, feature-packed, and epoxy-potted for true, long-term waterproof. This is a true 3-stage automatic charger that has built-in battery type selector which allows user to charge 12V Lead-Acid, AGM, or GEL batteries to their fullest capacities. This is an ideal small charger for recharging 12V battery system up to 98 Ah capacity.3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Battery Type SelectorTurbo M allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "Safe Charge Mode". The Safe Charge Mode is to be used when the user is unable to identify the type of battery in use.PrewiredTurbo M charger is prewired with DC output cables (ring terminals). Each cable is equipped with safety inline fuses.Over-Voltage ProtectionIf the charger is protected from over-voltage. If it detects voltage of 16V DC or higher from its connected battery, the charger will shut off due to abnormality.Over-Current ProtectionThe Charger limits itself to its maximum current output capacity. If a defective battery or its connected devices try to draw larger-than-provided current from the charger, the charger will not yield current exceeding its maximum output.Ignition ProtectionThe charger is encapsulated to eliminate any internal spark from igniting external surroundings. Internal spark could be potentially generated by misuse or component failure.Reverse Polarity ProtectionThe Charger is equipped with safety fuses on its output cables. If a user incorrectly connects a positive output cable to a battery_s negative terminal and vice versa, the fuse will be blown and thus disconnects the charger and the battery. When replacing blown fuses, please use spare fuses provided with the charger or use same rating and size fuses.Short Circuit ProtectionShort Circuit Protection feature protects charger from sudden burst of excessive high current caused when any positive output ring gets in contact with one of the negative output rings.Overheat ProtectionIf the charger detects its ambient temperature higher than the safety threshold, it will shut off to protect the charger from overheat damage. Once the ambient temperature returns to normal, the charger will automatically turn itself on again.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 100 - 120V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 3.0 Amps Total Output Current: 8 Amps Output Voltage / Bank: 13.5 - 14.7V DC Number of Output Bank: 1 (Prewired) Output Voltage Configuration: 12V DC Efficiency: 78% Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float) Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Maximum Absorption Time: 5 hours Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 5' AC Power Cord Length: 5' Dimension: 6.5" x 4.5" x 2.5" Weight: 4.7lb Recommended Battery Capacity: up to 96 Ah LED Indicatior:PowerCharge StatusOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class AIP65 (Splash Proof)Constructed in accordnce to Marine UL 1236 Specifications:Amps - Output = 8 Amps Amps Per Bank = 8 Amps Banks = 1 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 100/120V Voltage - Output (Volts) = 12VNormalized SKU: 57102UPC Code: 859321002114Powermania 57102 Video

  Watch VideoPowermania 57103 Battery ChargersTurbo M208E - Dual Bank Waterproof Onboard Charger - 12/24V DC - 8 AmpThe Turbo M208E is compact, feature-packed, and epoxy-potted for true, long-term waterproof. This is a true 3-stage automatic charger that has built-in battery type selector which allows user to charge two 12V Lead-Acid, AGM, or GEL batteries to their fullest capacities. This is an ideal small charger for recharging 12/24V battery system up to 96 Ah capacity. 3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. Adaptive LoadingA multi-output Turbo M charger can actively adjust each of its individual output loading and completes charging cycles in the shortest time possible. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Battery Type SelectorTurbo M allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "Safe Charge Mode". The Safe Charge Mode is to be used when the user is unable to identify the type of battery in use.PrewiredTurbo M charger is prewired with DC output cables (ring terminals). Each cable is equipped with safety inline fuses.Over-Voltage ProtectionIf the charger is protected from over-voltage. If it detects voltage of 16V DC or higher from its connected battery, the charger will shut off due to abnormality.Over-Current ProtectionThe Charger limits itself to its maximum current output capacity. If a defective battery or its connected devices try to draw larger-than-provided current from the charger, the charger will not yield current exceeding its maximum output.Ignition ProtectionThe charger is encapsulated to eliminate any internal spark from igniting external surroundings. Internal spark could be potentially generated by misuse or component failure.Reverse Polarity ProtectionThe Charger is equipped with safety fuses on its output cables. If a user incorrectly connects a positive output cable to a battery_s negative terminal and vice versa, the fuse will be blown and thus disconnects the charger and the battery. When replacing blown fuses, please use spare fuses provided with the charger or use same rating and size fuses.Short Circuit ProtectionShort Circuit Protection feature protects charger from sudden burst of excessive high current caused when any positive output ring gets in contact with one of the negative output rings.Overheat ProtectionIf the charger detects its ambient temperature higher than the safety threshold, it will shut off to protect the charger from overheat damage. Once the ambient temperature returns to normal, the charger will automatically turn itself on again.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 100 - 120V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 3.0 Amps Total Output Current: 8 Amps Output Voltage / Bank: 13.5 - 14.7V DC Number of Output Bank: 2 (Prewired) Output Voltage Configuration: 12/24V DC Efficiency: 78% Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float) Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Maximum Absorption Time: 5 hours Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 5' AC Power Cord Length: 5' Dimension: 6.5" x 4.5" x 2.5" Weight: 5.4lb Recommended Battery Capacity: up to 96 Ah LED Indicatior:PowerCharge StatusOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class AIP65 (Splash Proof)Constructed in accordnce to Marine UL 1236 Specifications:Amps - Output = 8 Amps Amps Per Bank = 4 Amps Banks = 2 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 100/120V Voltage - Output (Volts) = 12/24VNormalized SKU: 57103UPC Code: 859321002121Powermania 57103 Video

  Watch VideoPowermania 57104 Battery ChargersTurbo M212E - Dual Bank Waterproof Onboard Charger - 12/24V DC - 12 AmpThe Turbo M212E is compact, feature-packed, and epoxy-potted for true, long-term waterproof. This is a true 3-stage automatic charger that has built-in battery type selector which allows user to charge two 12V Lead-Acid, AGM, or GEL batteries to their fullest capacities. This is an ideal small charger for recharging 12/24V battery system up to 144 Ah capacity.3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. Adaptive LoadingA multi-output Turbo M charger can actively adjust each of its individual output loading and completes charging cycles in the shortest time possible. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Battery Type SelectorTurbo M allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "Safe Charge Mode". The Safe Charge Mode is to be used when the user is unable to identify the type of battery in use.PrewiredTurbo M charger is prewired with DC output cables (ring terminals). Each cable is equipped with safety inline fuses.Over-Voltage ProtectionIf the charger is protected from over-voltage. If it detects voltage of 16V DC or higher from its connected battery, the charger will shut off due to abnormality.Over-Current ProtectionThe Charger limits itself to its maximum current output capacity. If a defective battery or its connected devices try to draw larger-than-provided current from the charger, the charger will not yield current exceeding its maximum output.Ignition ProtectionThe charger is encapsulated to eliminate any internal spark from igniting external surroundings. Internal spark could be potentially generated by misuse or component failure.Reverse Polarity ProtectionThe Charger is equipped with safety fuses on its output cables. If a user incorrectly connects a positive output cable to a battery_s negative terminal and vice versa, the fuse will be blown and thus disconnects the charger and the battery. When replacing blown fuses, please use spare fuses provided with the charger or use same rating and size fuses.Short Circuit ProtectionShort Circuit Protection feature protects charger from sudden burst of excessive high current caused when any positive output ring gets in contact with one of the negative output rings.Overheat ProtectionIf the charger detects its ambient temperature higher than the safety threshold, it will shut off to protect the charger from overheat damage. Once the ambient temperature returns to normal, the charger will automatically turn itself on again.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 100 - 120V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 3.0 Amps Total Output Current: 12 Amps Output Voltage / Bank: 13.5 - 14.7V DC Number of Output Bank: 2 (Prewired) Output Voltage Configuration: 12/24V DC Efficiency: 78% Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float) Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Maximum Absorption Time: 5 hours Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 5' AC Power Cord Length: 5' Dimension: 8.25" x 5.75" x 2.75" Weight: 8.9lb Recommended Battery Capacity: up to 144 Ah LED Indicatior:PowerCharge StatusOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class AIP65 (Splash Proof)Constructed in accordnce to Marine UL 1236 Specifications:Amps - Output = 12 Amps Amps Per Bank = 6 Amps Banks = 2 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 100/120V Voltage - Output (Volts) = 12/24VNormalized SKU: 57104UPC Code: 859321002138Powermania 57104 Video

  Watch VideoPowermania 58201 Battery ChargersTurbo M212V2 - Dual Bank Waterproof Onboard Charger - 12/24V DC - 12 AmpThe Turbo M212V2 is based on the same compact and waterproof design of the first-gen Turbo M212. The V2 inherits all the features from the original Turbo M, including its ability to charge 0-volt dead batteries, to maintain 100% output at 90V AC, and to intelligently allocate more power to weaker batteries for speedy recharge. The M212V2 is now 25% lighter, runs cooler, and provides charge status and error check for each individual output.3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. Adaptive LoadingA multi-output Turbo M charger can actively adjust each of its individual output loading and completes charging cycles in the shortest time possible. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Selectable Charging ProfilesTurbo MV2 allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "AGM+ Mode". AGM+ is for charging high-performance AGM type battery (Odyssey and Optima brands AGM)Charge 0-Volt BatteryTurbo MV2 can be used to revive a 0-volt battery that has accumulated too much build up or has been allowed to sit unused for several months. It could take several days of charging to bring battery voltage to a normal level. Unless the battery has one or more shorted cell, Turbo M can save battery while most others cannot.Full Output at 90V ACTurbo MV2 delivers full output even if input AC voltage been dropped to 90V. In less than ideal charging setup using alternative power sources such as generator power or shore power via long extension cords, Turbo MV2 performs just as well as it was provided with full 120V AC from a standard power outlet.Global AC (120/240V AC) InputTurbo MV2 accepts global AC input (120/240V AC). It automatically senses the input voltage and adjusts accordingly.Individual Charge StatusThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.Individual Connection CheckThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 120 /240V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 3.0 Amps Total Output Current: 12 Amps Output Voltage / Bank: 13.4 - 14.7V DC Number of Output Bank: 2 (Prewired) Output Voltage Configuration: 12/24V DC Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float) Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 6' AC Power Cord Length: 6' Dimension: 8.25" x 5.75" x 2.75" Weight: 6.5lb DC Wire Gauge: 12 AWG LED Indicatior:PowerMonitor ModeOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class ACEIP65 (Splash Proof)Marine UL 1236CSA C22.2 N0. 107.2California Energy Commission (CEC) Specifications:Amps - Output = 12 Amps Amps Per Bank = 6 Amps Banks = 2 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 120/240V Voltage - Output (Volts) = 12/24VNormalized SKU: 58201UPC Code: 859321002176Powermania 58201 Video

Powermania 57205 Battery ChargersTurbo M215E2 15 Amp 2-Bank 12VDC Waterproof ChargerThe Turbo Marine E2 Series battery charger is a compact, all-aluminum, epoxy-sealed waterproof unit, specifically designed for recharging 12V batteries, even fully depleted batteries, in marine applications and other harsh environments.  The Turbo M-E2 comes with a battery selector for precisely recharge three types of 12V batteries - Lead Acid, Pure Lead AGM, and Lithium-Ion batteries.  Thanks to Turbo M-E2’s Adaptive Loading technology, this charger automatically allocates more charging power to the weaker battery, for faster overall charging cycles.  Plus, the unit features Three-Stage Smart Charge and delivers full charging power even when AC input is compromised (as low as 90V).   With its simple, intuitive operation, the Turbo M-E2 helps maximize battery life, so you can enjoy your time on the water without having to worry about running low on power. Features: All aluminum case Epoxy-sealed for true, long-term waterproof Automatic 3-Stage Smart Charge Adaptive Loading - More power to weaker batteries Selectable Profile: Lead-acid/AGM, LiFePO4, AGM+ Charge deeply-depleted 0-volt batteries 100% output @ 90V AC Auto-Restart in Float Mode Dimensions: 8-5/8" (L) x 5-7/8" (W) x 3" (H) Normalized SKU: 57205UPC Code: 859321002503

  Watch VideoPowermania 58203 Battery ChargersTurbo M220V2 - Dual Bank Waterproof Onboard Charger - 12/24V DC - 20 AmpThe new Turbo M220V2 is based on the same compact and waterproof design of the first-gen Turbo M220. The V2 inherits all the features from the original Turbo M, including its ability to charge 0-volt dead batteries, to maintain 100% output at 90V AC, and to intelligently allocate more power to weaker batteries for speedy recharge. The M220V2 is now 25% lighter, runs cooler (up to 25°F), and provides charge status and error check for each individual output.3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. Adaptive LoadingA multi-output Turbo M charger can actively adjust each of its individual output loading and completes charging cycles in the shortest time possible. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Selectable Charging ProfilesTurbo MV2 allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "AGM+ Mode". AGM+ is for charging high-performance AGM type battery (Odyssey and Optima brands AGM)Active CoolingThe Turbo M220V2 is equipped with a waterproof cooling fan. This temperature-controlled fan switches on and off automatically to help dissipate excess heat build up.Charge 0-Volt BatteryTurbo MV2 can be used to revive a 0-volt battery that has accumulated too much build up or has been allowed to sit unused for several months. It could take several days of charging to bring battery voltage to a normal level. Unless the battery has one or more shorted cell, Turbo M can save battery while most others cannot.Full Output at 90V ACTurbo MV2 delivers full output even if input AC voltage been dropped to 90V. In less than ideal charging setup using alternative power sources such as generator power or shore power via long extension cords, Turbo MV2 performs just as well as it was provided with full 120V AC from a standard power outlet.Global AC (120/240V AC) InputTurbo MV2 accepts global AC input (120/240V AC). It automatically senses the input voltage and adjusts accordingly.Individual Charge StatusThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.Individual Connection CheckThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 120 /240V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 4.7 Amps Total Output Current: 20 Amps Output Voltage / Bank: 13.4 - 14.7V DC Number of Output Bank: 2 (Prewired) Output Voltage Configuration: 12/24V DC Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float) Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 6' AC Power Cord Length: 6' Dimension: 8.25" x 5.75" x 2.75" Weight: 6.8lb DC Wire Gauge: 12 AWG LED Indicatior:PowerMonitor ModeOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class ACEIP65 (Splash Proof)Marine UL 1236CSA C22.2 N0. 107.2California Energy Commission (CEC) Specifications:Amps - Output = 20 Amps Amps Per Bank = 10 Amps Banks = 2 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 120/240V Voltage - Output (Volts) = 12/24VNormalized SKU: 58203UPC Code: 859321002183Powermania 58203 Video

  Watch VideoPowermania 58205 Battery ChargersTurbo M230V2 - Dual Bank Waterproof Onboard Charger - 12/24V DC - 30 AmpThe Turbo M230V2 is based on the same compact and waterproof design of the first-gen Turbo M230. The V2 inherits all the features from the original Turbo M, including its ability to charge 0-volt dead batteries, to maintain 100% output at 90V AC, and to intelligently allocate more power to weaker batteries for speedy recharge. The M230V2 is now 25% lighter, runs cooler (up to 25°F), and provides charge status and error check for each individual output.3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. Adaptive LoadingA multi-output Turbo M charger can actively adjust each of its individual output loading and completes charging cycles in the shortest time possible. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Selectable Charging ProfilesTurbo MV2 allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "AGM+ Mode". AGM+ is for charging high-performance AGM type battery (Odyssey and Optima brands AGM)Active CoolingThe Turbo M230V2 is equipped with a waterproof cooling fan. This temperature-controlled fan switches on and off automatically to help dissipate excess heat build up.Charge 0-Volt BatteryTurbo MV2 can be used to revive a 0-volt battery that has accumulated too much build up or has been allowed to sit unused for several months. It could take several days of charging to bring battery voltage to a normal level. Unless the battery has one or more shorted cell, Turbo M can save battery while most others cannot.Full Output at 90V ACTurbo MV2 delivers full output even if input AC voltage been dropped to 90V. In less than ideal charging setup using alternative power sources such as generator power or shore power via long extension cords, Turbo MV2 performs just as well as it was provided with full 120V AC from a standard power outlet.Global AC (120/240V AC) InputTurbo MV2 accepts global AC input (120/240V AC). It automatically senses the input voltage and adjusts accordingly.Individual Charge StatusThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.Individual Connection CheckThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 120 /240V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 4.7 Amps Total Output Current: 30 Amps Output Voltage / Bank: 13.4 - 14.7V DC Number of Output Bank: 2 (Prewired) Output Voltage Configuration: 12/24V DC Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float)= Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 6' AC Power Cord Length: 6' Dimension: 10.75" x 7.0" x 3.25" Weight: 13lb DC Wire Gauge: 12 AWG LED Indicatior:PowerMonitor ModeOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class ACEIP65 (Splash Proof)Marine UL 1236CSA C22.2 N0. 107.2California Energy Commission (CEC) Specifications:Amps - Output = 30 Amps Amps Per Bank = 15 Amps Banks = 2 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 120/240V Voltage - Output (Volts) = 12/24VNormalized SKU: 58205UPC Code: 859321002190Powermania 58205 Video

  Watch VideoPowermania 58208 Battery ChargersTurbo M240V2 - Dual Bank Waterproof Onboard Charger - 12/24V DC - 40 AmpThe Turbo M240V2 is based on the same compact and waterproof design of the first-gen Turbo M240. The V2 inherits all the features from the original Turbo M, including its ability to charge 0-volt dead batteries, to maintain 100% output at 90V AC, and to intelligently allocate more power to weaker batteries for speedy recharge. The M240V2 is now 25% lighter, runs cooler (up to 25°F), and provides charge status and error check for each individual output.3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. Adaptive LoadingA multi-output Turbo M charger can actively adjust each of its individual output loading and completes charging cycles in the shortest time possible. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Selectable Charging ProfilesTurbo MV2 allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "AGM+ Mode". AGM+ is for charging high-performance AGM type battery (Odyssey and Optima brands AGM)Active CoolingThe Turbo M240V2 is equipped with a waterproof cooling fan. This temperature-controlled fan switches on and off automatically to help dissipate excess heat build up.Charge 0-Volt BatteryTurbo MV2 can be used to revive a 0-volt battery that has accumulated too much build up or has been allowed to sit unused for several months. It could take several days of charging to bring battery voltage to a normal level. Unless the battery has one or more shorted cell, Turbo M can save battery while most others cannot.Full Output at 90V ACTurbo MV2 delivers full output even if input AC voltage been dropped to 90V. In less than ideal charging setup using alternative power sources such as generator power or shore power via long extension cords, Turbo MV2 performs just as well as it was provided with full 120V AC from a standard power outlet.Global AC (120/240V AC) InputTurbo MV2 accepts global AC input (120/240V AC). It automatically senses the input voltage and adjusts accordingly.Individual Charge StatusThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.Individual Connection CheckThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 120 /240V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 4.7 Amps Total Output Current: 40 Amps Output Voltage / Bank: 13.4 - 14.7V DC Number of Output Bank: 2 (Prewired) Output Voltage Configuration: 12/24V DC Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float) Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 6' AC Power Cord Length: 6' Dimension: 10.75" x 7.0" x 3.25" Weight: 13.5lb DC Wire Gauge: 12 AWG LED Indicatior:PowerMonitor ModeOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class ACEIP65 (Splash Proof)Marine UL 1236CSA C22.2 N0. 107.2California Energy Commission (CEC) Specifications:Amps - Output = 40 Amps Amps Per Bank = 20 Amps Banks = 2 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 120/240V Voltage - Output (Volts) = 12/24VNormalized SKU: 58208UPC Code: 859321002220Powermania 58208 Video

Powermania 58308 Battery ChargersTurbo M240V3 40 Amp 2-Bank 12/24VDC Waterproof ChargerFeatures: All aluminum and epoxy seal construction for optimal efficiency Charge fully drained 0 volt batteries Allocate more power to weaker bank 100% output at 90V AC Auto Switching 120/240 AC Input Three selectable battery type settings Specifications:Charger Input - Voltage = NONE Charger Output - Amps = NONE Charger Output Voltage = NONE Charging Banks = NONE Portable = NONENormalized SKU: 58308UPC Code: 859321002589

Powermania 57206 Battery ChargersTurbo M315E2 15 Amp 3-Bank 12VDC Waterproof ChargerThe Turbo Marine E2 Series battery charger is a compact, all-aluminum, epoxy-sealed waterproof unit, specifically designed for recharging 12V batteries, even fully depleted batteries, in marine applications and other harsh environments.  The Turbo M-E2 comes with a battery selector for precisely recharge three types of 12V batteries - Lead Acid, Pure Lead AGM, and Lithium-Ion batteries.  Thanks to Turbo M-E2’s Adaptive Loading technology, this charger automatically allocates more charging power to the weaker battery, for faster overall charging cycles.  Plus, the unit features Three-Stage Smart Charge and delivers full charging power even when AC input is compromised (as low as 90V).   With its simple, intuitive operation, the Turbo M-E2 helps maximize battery life, so you can enjoy your time on the water without having to worry about running low on power. Features: All aluminum case Epoxy-sealed for true, long-term waterproof Automatic 3-Stage Smart Charge Adaptive Loading - More power to weaker batteries Selectable Profile: Lead-acid/AGM, LiFePO4, AGM+ Charge deeply-depleted 0-volt batteries 100% output @ 90V AC Auto-Restart in Float Mode Dimensions: 8-5/8" (L) x 5-7/8" (W) x 3" (H) Normalized SKU: 57206UPC Code: 859321002510

  Watch VideoPowermania 58204 Battery ChargersTurbo M320V2 - Triple Bank Waterproof Onboard Charger - 12/24/36V DC - 20 AmpThe Turbo M320V2 is based on the same compact and waterproof design of the first-gen Turbo M320. The V2 inherits all the features from the original Turbo M, including its ability to charge 0-volt dead batteries, to maintain 100% output at 90V AC, and to intelligently allocate more power to weaker batteries for speedy recharge. The M320V2 is now 25% lighter, runs cooler (up to 25°F), and provides charge status and error check for each individual output.3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. Adaptive LoadingA multi-output Turbo M charger can actively adjust each of its individual output loading and completes charging cycles in the shortest time possible. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Selectable Charging ProfilesTurbo MV2 allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "AGM+ Mode". AGM+ is for charging high-performance AGM type battery (Odyssey and Optima brands AGM)Active CoolingThe Turbo M320V2 is equipped with a waterproof cooling fan. This temperature-controlled fan switches on and off automatically to help dissipate excess heat build up.Charge 0-Volt BatteryTurbo MV2 can be used to revive a 0-volt battery that has accumulated too much build up or has been allowed to sit unused for several months. It could take several days of charging to bring battery voltage to a normal level. Unless the battery has one or more shorted cell, Turbo M can save battery while most others cannot.Full Output at 90V ACTurbo MV2 delivers full output even if input AC voltage been dropped to 90V. In less than ideal charging setup using alternative power sources such as generator power or shore power via long extension cords, Turbo MV2 performs just as well as it was provided with full 120V AC from a standard power outlet.Global AC (120/240V AC) InputTurbo MV2 accepts global AC input (120/240V AC). It automatically senses the input voltage and adjusts accordingly.Individual Charge StatusThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.Individual Connection CheckThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 120 /240V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 4.7 Amps Total Output Current: 20 Amps Output Voltage / Bank: 13.4 - 14.7V DC Number of Output Bank: 3 (Prewired) Output Voltage Configuration: 12/24/36V DC Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float) Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 6' AC Power Cord Length: 6' Dimension: 8.25" x 5.75" x 2.75" Weight: 7.5lb DC Wire Gauge: 12 AWG LED Indicatior:PowerMonitor ModeOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class ACEIP65 (Splash Proof)Marine UL 1236CSA C22.2 N0. 107.2California Energy Commission (CEC) Specifications:Amps - Output = 20 Amps Amps Per Bank = NONE Banks = 3 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 120/240V Voltage - Output (Volts) = 12/24/36VNormalized SKU: 58204UPC Code: 859321002251Powermania 58204 Video

  Watch VideoPowermania 58206 Battery ChargersTurbo M330V2 - Triple Bank Waterproof Onboard Charger - 12/24/36V DC - 30 AmpThe Turbo M330V2 is based on the same compact and waterproof design of the first-gen Turbo M330. The V2 inherits all the features from the original Turbo M, including its ability to charge 0-volt dead batteries, to maintain 100% output at 90V AC, and to intelligently allocate more power to weaker batteries for speedy recharge. The M330V2 is now 25% lighter, runs cooler (up to 25°F), and provides charge status and error check for each individual output.3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. Adaptive LoadingA multi-output Turbo M charger can actively adjust each of its individual output loading and completes charging cycles in the shortest time possible. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Selectable Charging ProfilesTurbo MV2 allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "AGM+ Mode". AGM+ is for charging high-performance AGM type battery (Odyssey and Optima brands AGM)Active CoolingThe Turbo M330V2 is equipped with a waterproof cooling fan. This temperature-controlled fan switches on and off automatically to help dissipate excess heat build up.Charge 0-Volt BatteryTurbo MV2 can be used to revive a 0-volt battery that has accumulated too much build up or has been allowed to sit unused for several months. It could take several days of charging to bring battery voltage to a normal level. Unless the battery has one or more shorted cell, Turbo M can save battery while most others cannot.Full Output at 90V ACTurbo MV2 delivers full output even if input AC voltage been dropped to 90V. In less than ideal charging setup using alternative power sources such as generator power or shore power via long extension cords, Turbo MV2 performs just as well as it was provided with full 120V AC from a standard power outlet.Global AC (120/240V AC) InputTurbo MV2 accepts global AC input (120/240V AC). It automatically senses the input voltage and adjusts accordingly.Individual Charge StatusThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.Individual Connection CheckThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 120 /240V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 4.7 Amps Total Output Current: 30 Amps Output Voltage / Bank: 13.4 - 14.7V DC Number of Output Bank: 3 (Prewired) Output Voltage Configuration: 12/24/36V DC Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float) Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 6' AC Power Cord Length: 6' Dimension: 10.75" x 7.0" x 3.25" Weight: 13.5lb DC Wire Gauge: 12 AWG LED Indicatior:PowerMonitor ModeOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class ACEIP65 (Splash Proof)Marine UL 1236CSA C22.2 N0. 107.2California Energy Commission (CEC) Specifications:Amps - Output = 30 Amps Amps Per Bank = 10 Amps Banks = 3 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 120/240V Voltage - Output (Volts) = 12/24/36VNormalized SKU: 58206UPC Code: 859321002206Powermania 58206 Video

  Watch VideoPowermania 58209 Battery ChargersTurbo M340V2 - Triple Bank Waterproof Onboard Charger - 12/24/36V DC - 40 AmpThe Turbo M340V2 is based on the same compact and waterproof design of the first-gen Turbo M340. The V2 inherits all the features from the original Turbo M, including its ability to charge 0-volt dead batteries, to maintain 100% output at 90V AC, and to intelligently allocate more power to weaker batteries for speedy recharge. The M340V2 is now 25% lighter, runs cooler (up to 25°F), and provides charge status and error check for each individual output.3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. Adaptive LoadingA multi-output Turbo M charger can actively adjust each of its individual output loading and completes charging cycles in the shortest time possible. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Selectable Charging ProfilesTurbo MV2 allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "AGM+ Mode". AGM+ is for charging high-performance AGM type battery (Odyssey and Optima brands AGM)Active CoolingThe Turbo M340V2 is equipped with a waterproof cooling fan. This temperature-controlled fan switches on and off automatically to help dissipate excess heat build up.Charge 0-Volt BatteryTurbo MV2 can be used to revive a 0-volt battery that has accumulated too much build up or has been allowed to sit unused for several months. It could take several days of charging to bring battery voltage to a normal level. Unless the battery has one or more shorted cell, Turbo M can save battery while most others cannot.Full Output at 90V ACTurbo MV2 delivers full output even if input AC voltage been dropped to 90V. In less than ideal charging setup using alternative power sources such as generator power or shore power via long extension cords, Turbo MV2 performs just as well as it was provided with full 120V AC from a standard power outlet.Global AC (120/240V AC) InputTurbo MV2 accepts global AC input (120/240V AC). It automatically senses the input voltage and adjusts accordingly.Individual Charge StatusThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.Individual Connection CheckThe Turbo MV2 features individual charge status / connection check light for =each DC output: red for charging, green for ready, and amber for a faulty battery or connection.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 120 /240V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 4.7 Amps Total Output Current: 40 Amps Output Voltage / Bank: 13.4 - 14.7V DC Number of Output Bank: 3 (Prewired) Output Voltage Configuration: 12/24/36V DC Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float) Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 6' AC Power Cord Length: 6' Dimension: 10.75" x 7.0" x 3.25" Weight: 14.0lb DC Wire Gauge: 12 AWG LED Indicatior:PowerMonitor ModeOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class ACEIP65 (Splash Proof)Marine UL 1236CSA C22.2 N0. 107.2California Energy Commission (CEC) Specifications:Amps - Output = 40 Amps Amps Per Bank = 13.3 Amps Banks = 3 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 120/240V Voltage - Output (Volts) = 12/24/36VNormalized SKU: 58209UPC Code: 859321002237Powermania 58209 Video

Powermania 58309 Battery ChargersTurbo M340V3 40 Amp 3-Bank 12/24/36VDC Waterproof ChargerFeatures: All aluminum and epoxy seal construction for optimal efficiency Charge fully drained 0 volt batteries Allocate more power to weaker bank 100% output at 90V AC Auto Switching 120/240 AC Input Three selectable battery type settings Specifications:Charger Input - Voltage = NONE Charger Output - Amps = NONE Charger Output Voltage = NONE Charging Banks = NONE Portable = NONENormalized SKU: 58309UPC Code: 859321002596

  Watch VideoPowermania 58207 Battery ChargersTurbo M430V2 - 4 Bank Waterproof Onboard Charger - 12/24/36/48V DC - 30 AmpThe Turbo M430V2 is based on the same compact and waterproof design of the first-gen Turbo M430. The V2 inherits all the features from the original Turbo M, including its ability to charge 0-volt dead batteries, to maintain 100% output at 90V AC, and to intelligently allocate more power to weaker batteries for speedy recharge. The M430V2 is now 25% lighter, runs cooler (up to 25°F), and provides charge status and error check for each individual output.3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. Adaptive LoadingA multi-output Turbo M charger can actively adjust each of its individual output loading and completes charging cycles in the shortest time possible. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Selectable Charging ProfilesTurbo MV2 allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "AGM+ Mode". AGM+ is for charging high-performance AGM type battery (Odyssey and Optima brands AGM)Active CoolingThe Turbo M430V2 is equipped with a waterproof cooling fan. This temperature-controlled fan switches on and off automatically to help dissipate excess heat build up.Charge 0-Volt BatteryTurbo MV2 can be used to revive a 0-volt battery that has accumulated too much build up or has been allowed to sit unused for several months. It could take several days of charging to bring battery voltage to a normal level. Unless the battery has one or more shorted cell, Turbo M can save battery while most others cannot.Full Output at 90V ACTurbo MV2 delivers full output even if input AC voltage been dropped to 90V. In less than ideal charging setup using alternative power sources such as generator power or shore power via long extension cords, Turbo MV2 performs just as well as it was provided with full 120V AC from a standard power outlet.Global AC (120/240V AC) InputTurbo MV2 accepts global AC input (120/240V AC). It automatically senses the input voltage and adjusts accordingly.Individual Charge StatusThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.Individual Connection CheckThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 120 /240V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 4.7 Amps Total Output Current: 30 Amps Output Voltage / Bank: 13.4 - 14.7V DC Number of Output Bank: 4 (Prewired) Output Voltage Configuration: 12/24/36/48V DC Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float) Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 6' AC Power Cord Length: 6' Dimension: 10.75" x 7.0" x 3.25" Weight: 14.0lb DC Wire Gauge: 12 AWG LED Indicatior:PowerMonitor ModeOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class ACEIP65 (Splash Proof)Marine UL 1236=CSA C22.2 N0. 107.2California Energy Commission (CEC) Specifications:Amps - Output = 30 Amps Amps Per Bank = 7.5 Amps Banks = 4 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 120/240V Voltage - Output (Volts) = 12/24/36/48VNormalized SKU: 58207UPC Code: 859321002213Powermania 58207 Video

  Watch VideoPowermania 58210 Battery ChargersTurbo M440V2 - 4 Bank Waterproof Onboard Charger - 12/24/36/48V DC - 40 AmpThe Turbo M440V2 is based on the same compact and waterproof design of the first-gen Turbo M440. The V2 inherits all the features from the original Turbo M, including its ability to charge 0-volt dead batteries, to maintain 100% output at 90V AC, and to intelligently allocate more power to weaker batteries for speedy recharge. The M440V2 is now 25% lighter, runs cooler (up to 25°F), and provides charge status and error check for each individual output.3 Stage Smart ChargeTurbo M charges battery in three sequential stage - Bulk, Absorption, and Float. This mechanism is proven to bring battery to its fullest charge, and also to maintain battery from self discharge. Adaptive LoadingA multi-output Turbo M charger can actively adjust each of its individual output loading and completes charging cycles in the shortest time possible. WaterproofTurbo ME is fully epoxy potted for true, long-term waterproof, shock and corrosion-resistant. It is IP65 rated (Ingress Protection) for splash proof.Selectable Charging ProfilesTurbo MV2 allows the user to select different types of 12V DC batteries to charge. The initial factory setting is at "Flooded Lead Acid / AGM Charge Mode". The other two charge modes are "Gel Charge Mode" and "AGM+ Mode". AGM+ is for charging high-performance AGM type battery (Odyssey and Optima brands AGM)Active CoolingThe Turbo M440V2 is equipped with a waterproof cooling fan. This temperature-controlled fan switches on and off automatically to help dissipate excess heat build up.Charge 0-Volt BatteryTurbo MV2 can be used to revive a 0-volt battery that has accumulated too much build up or has been allowed to sit unused for several months. It could take several days of charging to bring battery voltage to a normal level. Unless the battery has one or more shorted cell, Turbo M can save battery while most others cannot.Full Output at 90V ACTurbo MV2 delivers full output even if input AC voltage been dropped to 90V. In less than ideal charging setup using alternative power sources such as generator power or shore power via long extension cords, Turbo MV2 performs just as well as it was provided with full 120V AC from a standard power outlet.Global AC (120/240V AC) InputTurbo MV2 accepts global AC input (120/240V AC). It automatically senses the input voltage and adjusts accordingly.Individual Charge StatusThe Turbo MV2 features individual charge status / connection check light for each DC output: red for charging, green for ready, and amber for a faulty battery or connection.Individual Connection CheckThe Turbo MV2 features individual charge status / connection check light for =each DC output: red for charging, green for ready, and amber for a faulty battery or connection.2 Year WarrantyPowermania, at its disretion, provides 2 year limited warranty on Turbo M Chargers against defects in materials or workmanship under normal use.Specifications: Norminal Input Voltage: 120 /240V AC Norminal Input Frequency: 50 - 60Hz Maximum Input Current (@120V AC): 4.7 Amps Total Output Current: 40 Amps Output Voltage / Bank: 13.4 - 14.7V DC Number of Output Bank: 4 (Prewired) Output Voltage Configuration: 12/24/36/48V DC Battery Type Setting: 1.Flooded (Lead-Acid) / AGM 2.GEL 3.AGM+ Charging Voltage (Flooded / AGM): 14.6V (Absorption) / 13.5V (Float) Charging Voltage (GEL): 14.1V (Absorption) / 13.8V (Float) Charging Voltage (AGM+): 14.7V (Absorption) / 13.6V (Float) Operational Temperature: -4°F - 122°F Storage Temperature: -40°F - -185°F Output Cable Length: 6' AC Power Cord Length: 6' Dimension: 10.75" x 7.0" x 3.25" Weight: 14.5lb DC Wire Gauge: 12 AWG LED Indicatior:PowerMonitor ModeOver-Voltage IndicatorOverheat IndicatorAGM+ Charge ModeGel(Gel Cell) Charge ModeLead-Acid / AGM Charge ModeSafety Features:Ignition ProtectionOverheat ProtectionOver-Current ProtectionOver-Voltage Protection ProtectionReverse Polarity ProtectionShort-Circuit ProtectionComplianceFCC Class ACEIP65 (Splash Proof)Marine UL 1236CSA C22.2 N0. 107.2California Energy Commission (CEC) Specifications:Amps - Output = 40 Amps Amps Per Bank = 10 Amps Banks = 4 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = 120/240V Voltage - Output (Volts) = 12/24/36/48VNormalized SKU: 58210UPC Code: 859321002244Powermania 58210 Video

Powermania 58310 Battery ChargersTurbo M440V3 40 Amp 4-Bank 12/24/36/48VDC Waterproof ChargerFeatures: All aluminum and epoxy seal construction for optimal efficiency Charge fully drained 0 volt batteries Allocate more power to weaker bank 100% output at 90V AC Auto Switching 120/240 AC Input Three selectable battery type settings Specifications:Charger Input - Voltage = NONE Charger Output - Amps = NONE Charger Output Voltage = NONE Charging Banks = NONE Portable = NONENormalized SKU: 58310UPC Code: 859321002602