Seaview LTBLED12 All-Round LightsRound LED Combo Masthead - White - All Round - Light Bar TopRound Seaview 3NM LED combination masthead all round light / IP67 watertight with 7' of wire (12v). USCG-approved boats up to 20 meters (65.6') in length. Normalized SKU: LTBLED12UPC Code: 727908835984

  Download LiteratureSeaview SP5S Mounting HardwareSeaview SPOD Sail Pod BoxUncut SPOD Sail Pod for 3 Instruments with 2ea S.S. clampsOverall Dimensions: Width: 15.25" Height: 5.5" Depth: 3.185" Max Usable Face: Width: 14.75" Height: 5" Max Cut Out Area: Width: 13.875" Height: 4.125" The SPOD is a pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.Stainless Steel ClampsThe stainless steel clamps will clamp onto 1", 1.125" and 1.25" rails.Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.Optional Accessory PodOne of the unique abilities with this SPOD is the ability to add optional side pods (SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. Specifications:Cut/Uncut = Uncut Mounting Style = Pedestal Usable Face = 14.75" x 5"Normalized SKU: SP5SUPC Code: 839662008860Seaview SP5S Literature Download  Product Brochure

  Download LiteratureSeaview SP4S Mounting HardwareSeaview SPOD Sail Pod BoxUncut Large Sail Pod with 2ea S.S. clampsOverall Dimensions: Width: 17.5" Height: 12.75" Depth: 5.7" Max Usable Face: Width: 16.938" Height: 12.25" Max Cut Out Area: Width: 16" Height: 11.25" Fits Models B&G: Z12 Furuno: 1824C, 1834C, 1934C, 1944C, 1954C, 1964C, GP1920C, TZT14, MFD12, DCU12, MU-120C Garmin: 4010, 4012, 4210, 4212, 5012, 5212, 5015, 5215, 6012, 6212, 7012, 7015, 7212, 7215, 8012, 8212, 8215, 8015 Humminbird: 1100 Series Raymarine: E120, e125, e127, C120W, C140, E120W Simrad: NSS12, NSE12 Sitex: EC11, SNS 1100 Standard Horizon: CP590, CPV550 The SPOD is a pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.Stainless Steel ClampsThe stainless steel clamps will clamp onto 1", 1.125" and 1.25" rails.Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.Optional Accessory PodOne of the unique abilities with this SPOD is the ability to add optional side pods (SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. Specifications:Cut/Uncut = Uncut Mounting Style = Pedestal Usable Face = 17.5" x 12.75"Normalized SKU: SP4SUPC Code: 839662000895Seaview SP4S Literature Download  Product Brochure

  Download LiteratureSeaview SP3S Mounting HardwareSeaview SPOD Sail Pod BoxUncut Medium Pod with 2ea S.S. clampsOverall Dimensions: Width: 14.25" Height: 9.5" Depth: 5.147" Max Usable Face: Width: 13.75" Height: 9" Max Cut Out Area: Width: 12.938" Height: 8.125" Fits Models B&G: Z8 Furuno: 1623, 1715, 1724C, 1734C, GP1720C, MFD8 Garmin: 6008, 6208, 8008, 8208 Lowrance: HDS-8, HDS-8M (same for Gen2) Lowrance: HDS-10, HDS-10M (same for Gen2) Raymarine: C70, C80, E80, C90W, E90W Simrad: NSS8, NSE8 Sitex: EC5, EC7, SNS 700 Standard Horizon: CPN1010i The SPOD is a pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.Stainless Steel ClampsThe stainless steel clamps will clamp onto 1", 1.125" and 1.25" rails.Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.Optional Accessory PodOne of the unique abilities with this SPOD is the ability to add optional side pods (SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. Specifications:Cut/Uncut = Uncut Mounting Style = Pedestal Usable Face = 13.75" x 9"Normalized SKU: SP3SUPC Code: 839662008846Seaview SP3S Literature Download  Product Brochure

  Download LiteratureSeaview SP1S Mounting HardwareSeaview SPOD Sail Pod BoxUncut Single Instrument Pod, 1ea S.S. clampOverall Dimensions: Width: 5.038" Height: 5.163" Depth: 3.125" Max Usable Face: Width: 4.625" Height: 4.625" Max Cut Out Area: Width: 4.125" Height: 4.125" The SPOD is a pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.Stainless Steel ClampsThe stainless steel clamps will clamp onto 1", 1.125" and 1.25" rails.Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.Optional Accessory PodOne of the unique abilities with this SPOD is the ability to add optional side pods (SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. Specifications:Cut/Uncut = Uncut Mounting Style = Pedestal Usable Face = 4.625"x4.625"Normalized SKU: SP1SUPC Code: 839662008822Seaview SP1S Literature Download  Product Brochure

  Download LiteratureSeaview SP2S Mounting HardwareSeaview SPOD Sail Pod BoxUncut Small Sail Pod with 2ea S.S. clampsOverall Dimensions: Width: 12.305" Height: 7.555" Depth: 5.08" Max Usable Face: Width: 11.75" Height: 7" Max Cut Out Area: Width: 11" Height: 6.125" Fits Models Furuno: GP150D, GP1670(F), GP1850F, GP1870(F),GP7800F Garmin: 527, 547, 620, 640, 720, 721, 740, 741, 4008, 4208, 5008, 5208, 70s Humminbird: 500, 700, 800, 900 Series Lowrance: HDS-5, HDS-5M, HDS-5X, HDS-7, HDS-7M (same for Gen2) Raymarine: e7, e7D, A50, A50D, A57D, e9, c95, e95, A70, A70D Simrad: NSS7 Sitex: EC5, EC7, SNS 700 Standard Horizon: CPN700i, CP190i, CP390i, CPF190i, CPF390i The SPOD is a pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.Stainless Steel ClampsThe stainless steel clamps will clamp onto 1", 1.125" and 1.25" rails.Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.Optional Accessory PodOne of the unique abilities with this SPOD is the ability to add optional side pods (SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. Specifications:Cut/Uncut = Uncut Mounting Style = Pedestal Usable Face = 11.75"x7"Normalized SKU: SP2SUPC Code: 839662008839Seaview SP2S Literature Download  Product Brochure

Seaview SPLTLEDV2 Search & Spot LightsSpreader LED Floodlight KitEnhance your visibility with a Seaview Floodlight Kit. This kit is specifically for the Seaview Spreader Kits and comes with a Lunasea floodlight (8W, 1,600 lumen LED flood). Compact outdoor light utilizing the newest high-performance LED technology. Excellent for lighting up small to medium-sized areas.Fits both Seaview Spreader Kits #SP1MODV2 and #SP2MODV2.Features: Hard Anodized aluminum housing with baked Urethane finish for extreme durability 120° beam angle Tempered glass lens (will not yellow like plastic lenses) Breather valve Cool white illumination (5700K) IP67 rated In the Box: 1-1/4" stainless steel bracket Mounting hardware Lunasea LED floodlight (LLB-61WC-81-00) Normalized SKU: SPLTLEDV2UPC Code: 850047035097

Seaview SP-LT-LED Mounting HardwareSpreader LED Floodlight KitThe Seaview Spreader LED Floodlight Kit includes one LED floodlight and a mounting bracket. Specifications:Construction = NONE Lean (FWD/Aft) = NONE Light/GPS Bracket = YesNormalized SKU: SPLTLEDUPC Code: 839662009294

Seaview LTB-100-SS-LED Navigation CamerasStainless Steel Light Bar w/Attwood LED Light - 7' WireA stainless steel light bar that fits onto all Seaview stainless steel mounts. Comes with an Attwood LED light pre-wired and installed. Normalized SKU: LTB100SSLEDUPC Code: 839662006200

Seaview LTB-SS Mounting HardwareStainless Steel Universal Light/GPS Bar for All Stainless Steel Power Mounts Specifications:Lean (FWD/Aft) = NONE Light/GPS Bracket = NONE Construction = NONESEAVIEW STAINLESS STEEL LIGHT GPS BAR FOR SS POWER MOUNTSNormalized SKU: LTBSSUPC Code: 839662002233

Seaview SP7-SS Connectors & AccessoriesSS 1-14 Threaded Insert f/Spreader Kits Recommended f/4' & Taller AntennasThe stainless steel 1-14 threaded insert is for Seaview Spreader Kits. Replaces the factory plastic 1-14 threaded insert if you plan on using 4' or taller fiberglass antennas. Normalized SKU: SP7SSUPC Code: 015568068614