Seaview ADAR1BLK Mounting HardwareModular Plate for Most Closed Domes & Open Arrays - BlackSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top PlatesKing StarboardThe ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation. Normalized SKU: ADAR1BLKUPC Code: 727908835441

Seaview ADA-F1 Mounting HardwareADA-F1Seaview's innovative new modular electronic mounts feature a unique universal plate design that provide a cleaner look and greater installation flexibility. The end result is a nice clean look with no visible holes.This modular Top Plate fits FLIR M-Series, Raymarine T-Series. Specifications:Construction = NONE Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: ADAF1UPC Code: 839662009171

Seaview ADA-S1 Mounting HardwareADA-S1Seaview's innovative new modular electronic mounts feature a unique universal plate design that provides a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate match up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes.This modular Top Plate fits: Intellian i1 (for modular parts ending in M1) Glomex 20"-27" Satdomes (for modular parts ending in M1) KVH M1 (for modular parts ending in M1) KVH M2, M3 (for modular mounts ending in M1 or M2) Thrane & Thrane Sailor FB500 / Fleet 55+ Raymarine 33STV (for modular parts ending in M1) Raymarine 37STV (for modular parts ending in M1 or M2) Sea-King 1500HD (for modular parts ending in M1 or M2) Sea-Tel (Cobham) C14 (for modular parts ending in M1 or M2) VDO Ocean Line 132 (for modular parts ending in M1) / Ocean Line 337. Specifications:Construction = Anodized Aluminum Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: ADAS1UPC Code: 839662009133

Seaview ADA-R1 Mounting HardwareADA-R1Seaview's innovative new modular electronic mounts feature a unique universal plate design that provide a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate that matches up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes.This is one of Seaview's more popular Modular Top Plates. Fits almost all Closed Dome and Open Array Radars. Furuno 15" - 24" Radar Domes and 4' - 6' Open Array Radar Garmin 18"-24" Radar Domes and 4'-6' Open Array Radars Geonav 24" Radar Domes and 4'-6' Open Array Radars JRC 15" Radar Domes, Koden 18"-24" Radar Domes and 4'-6' Open Array Radars Lowrance 18"-24" Radar Domes BR24 / 3G / 4G and 4'-6' Open Array Radars Lorenz 12"-24" Radar Domes and 4'-6' Open Array Radars Nobeltec 17"-25" Radar Domes and 3.5'-6' Open Array Radars Raymarine 18"-24" Radar Domes and 4'-6' Open Array Radars Simrad 18"-24" Radar Domes / BR24 / 3G / 4G and 4'-6' Open Array Radars Sitex 12"-24" Radar Domes and 4'-6' Open Array Radars Seiwa / Techmarine 12"-24" Radar Domes and 4'-6' Open Array Radars. Specifications:Construction = Anodized Aluminum Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: ADAR1UPC Code: 839662009119

Download LiteratureSeaview ADABLANK Mounting HardwareModular Plate to Fit Searchlights & Thermal Cameras on Seaview Mounts Ending in M1 or M2The Seaview ADABLANK is a universal modular top plate for mounting a searchlight or thermal camera for Seaview Modular Mounts ending in M1 or M2.King StarboardTop Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean-looking installation. Normalized SKU: ADABLANKUPC Code: 015568068645Seaview ADABLANK Literature Download Quick Reference Guide

Seaview CGM17SB Cable GlandsMulti Cable Gland with Black Coated Cover - Stainless Steel Wire - 2-17mmThe Seaview Cable Glands/Cable Clams provide waterproof cable routing made of UV stable Glass Filled (GF) ABS plastic, 316 stainless steel or black powder coated 316 stainless steel. Seaview cable gland options for 17mm to 31mm (0.67” to 1.25”) connectors, making it ideal for almost every installation. Specifications:Type = NONENormalized SKU: CGM17SBUPC Code: 727908835571

Seaview SRM300WB8BLK Mounting HardwarePerformance Gen 3 Starlink Antenna Mount with 8 Degree Wedge Base - BlackThe Seaview SRM300WB8 surface mount for the Starlink Performance Gen 3 Antenna has been specifically designed for the harsh marine environment. If it's good for the marine environment, then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-sides, UTVs, trucks, etc.).The SRM300WB8 kit includes a Starlink Performance Gen 3 adapter plate (ADASPG3AP) and an 8° wedge base (SVSLWB). The wedge base has pre-drilled mounting holes for easy hardware fastening and is drilled and tapped for the included CG30PW cable seal, ensuring a watertight and secure installation without the need to cut Starlink connectors.The aluminum wedge base has a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance. Normalized SKU: SRM300WB8BLKUPC Code: 850073256183

Seaview SRM300WB8 Mounting HardwarePerformance Gen 3 Starlink Antenna Mount with 8 Degree Wedge Base - WhiteThe Seaview SRM300WB8 surface mount for the Starlink Performance Gen 3 Antenna has been specifically designed for the harsh marine environment. If it's good for the marine environment, then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-sides, UTVs, trucks, etc.).The SRM300WB8 kit includes a Starlink Performance Gen 3 adapter plate (ADASPG3AP) and an 8° wedge base (SVSLWB). The wedge base has pre-drilled mounting holes for easy hardware fastening and is drilled and tapped for the included CG30PW cable seal, ensuring a watertight and secure installation without the need to cut Starlink connectors.The aluminum wedge base has a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance. Normalized SKU: SRM300WB8UPC Code: 850073256138

Seaview ADA-S1-BLK Radar MountSeaview's innovative new modular electronic mounts feature a unique universal plate design that provides a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate match up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes. This modular Top Plate fits: Intellian i1 (for modular parts ending in M1) / i2 / i3 Glomex 20"-27" Satdomes (for modular parts ending in M1) KVH M1 (for modular parts ending in M1) / M2 / M3 Thrane & Thrane Sailor FB500 / Fleet 55+ Raymarine 33STV (for modular parts ending in M1) / 37STV Sea-King 1500HD Sea-Tel (Cobham) C14 VDO Ocean Line 132 (for modular parts ending in M1) / Ocean Line 337. Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more!   Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5"   Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5"   Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5"     Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12"   Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18"   Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5"   Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5"   Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5"   Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes  / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes  / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes  / Top plate required PMA-DM3-M2 28"    Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes  / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories   PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB  (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB  (includes LED floodlight & hardware)  PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge   PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate   PM-H7 Hinge adapter/ for 7x7 base plate/  (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/  (fits most 24 -36 in. tall Radar Mounts) Normalized SKU: ADAS1BLK

Seaview ADAS4 Mounting HardwareSeaview Plate for FB150 and FB250 #ADAS4Normalized SKU: ADAS4