Vetus BP185G75 ThrustersVetus GRP Tunnel 185 x 750mmModel: BP185G75750mm long GRP tunnel for thrusters requiring 185mm diameterNormalized SKU: BP185G75

Vetus BOW6012D Thrusters Vetus BOW6012D Bow thruster 60 Kgf, 12 V, tunnel 185 mm diameter. Model: BOW6012D A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimizes cavitation noise The use of a flexible coupling between the tailpiece and motor eliminates vibration All VETUS systems use a streamlined tailpiece for optimum flow A strong synthetic propeller eliminates corrosion and reduces weight Systems are easy to install and supplied with clear installation and operation instructions VETUS systems use a new line of high-quality aluminum control panels which are interchangeable with older panels All VETUS maneuvering systems meet the EMC requirements Vetus bow thruster Provides On-off, port-starboard propulsion which allows the captain to turn the boat left or right without forward motion Includes reversible DC motor, solenoid set with cover, intermediate flange, streamlined bronze tail-piece, propeller, gaskets, and hardware Thrust Rating: 143 Pound-force, 65 Kilogram-force, 650 Newtons 3 kW / 4 HP power rating 12 volts DC operation 300 amps DC consumption 4 minutes maximum continuous operating time 4 minutes maximum operating time per hour Rated for 200 amp DC slow blow main fuse assembly P/N ZE200 and ZEHC100 (sold separately) Designed for use with 7-9/32 inch (185 mm) inside diameter thruster tunnels (sold separately) Bow thruster tunnels are available in either fiberglass, steel, or aluminum for corresponding boat hull Stern Applications require Stern Tunnels (STERN185P - sold separately) Unique propeller blade design and streamlined tailpiece provide optimum flow with minimal noise Requires additional components including a control panel, control panel connection cable, bow thruster tunnel or stern thruster housing, and battery cables with lugs to complete installation 49 lbs Replaces Vetus BOW6012A, BOW6012B, BOW6012C NOTE: This will also fit in the same tunnel as the BOW5012. Specifications Thrust (kgf) 65 Power (kW) 3 Internal tunnel diameter (mm) 185 Weight (kg) 17 Voltage (V) 12 Current consumption (A) 280 Continuous operating time (min) 5 Ignition protected No Proportional No Retractable No Extended runtime No Normalized SKU: BOW6012D

Vetus BP125G75 ThrustersGRP Tunnel - 125mm Internal Diameter - 750mm LengthHigh-quality tunnel for VETUS bow thrusters, made from fiberglass-reinforced polyester. The internal diameter is 125 mm, and the length is 750 mm.Specifications: Internal Tunnel Diameter: 125 mm (4.92 in.) Length: 750 mm (29.52 in.) Material: Fiberglass-reinforced polyester Normalized SKU: BP125G75

Vetus SET0086 Thrusters New and improved replacement propeller for Vetus BOW2512 model thrusters. Vetus thruster propeller Fits Vetus BOW2512 thrusters 108 mm overall diameter The new 6 blade propeller has reduced current consumption by about 10% over older 3-blade propellers Includes hardware for mounting the propeller Zinc sold separately Replaces Vetus BP1222 Normalized SKU: SET0086

Vetus SET0001 Thrusters 50mm (2 inches) Replacement Hose Connection Set Applications: LGS. LSG, NLPG, NLPH, NLP Normalized SKU: SET0001

Vetus SET0060 Thrusters Motor Assembly Normalized SKU: SET0060

Vetus SET0004 Thrusters Set Hose Connection D 90mm Clamp Ring Normalized SKU: SET0004

Vetus SET0002 Thrusters 60mm (2-3/8 inch) Replacement Hose Connection Set Applications: LGS. LSG60, NLPG60, NLPH60, NLP60 Normalized SKU: SET0002

Vetus BP150G75 Thrusters 29-17/32 in. long fiberglass tube for installation of Vetus BOW3512D, BOW5512D, and BOW5524D thrusters in fiberglass hull boats. Vetus thruster tunnel 5 29/32 in. inside diameter (150 mm) 6 5/16 in. outside diameter (160.6 mm) 29 17/32 in. length (750 mm) Made of fiberglass-reinforced polyester For use with Vetus BOW3512D, BOW5512D and BOW5524D bow thrusters Replaces Vetus BP150G Normalized SKU: BP150G75

Vetus BP1202 Thrusters Replacement flexible drive coupling for Vetus BOW55A, BOW60, BOW75, and BOW95 model thrusters. Vetus flexible coupling Parallel 20 mm with 6 mm keyway on the motor side 12.5 mm/14.5 mm 10 spline drive for drive leg For BOW55A/60/75/95 model thrusters Normalized SKU: BP1202

Sleipner SM41260 ThrustersSleipner Propeller Locknut #SM41260Normalized SKU: SM41260

Sleipner SMANLHOLD ThrustersSleipner ANL Fuseholder #SMANLHOLDNormalized SKU: SMANLHOLD

Sleipner SMANLHOLD-C ThrustersSleipner ANL Fuseholder with Clear Cover #SMANLHOLD-CNormalized SKU: SMANLHOLDC

Sleipner SMPJC211 ThrustersSleipner Single Joystick Panel with Integral LCD #SMPJC211Normalized SKU: SMPJC211

Sleipner SMANL400 ThrustersSleipner ANL Fuse 400a for SE/SR/SRL/SRV/SX8 #SMANL400Normalized SKU: SMANL400

Sleipner SMANL500 ThrustersSleipner ANL Fuse 500a for SE100 12v SE13 #SMANL500Normalized SKU: SMANL500

Sleipner SMANL250 ThrustersSleipner ANL Fuse 250a for SE40 SE/SR/SRL/S #SMANL250Normalized SKU: SMANL250