VDO A2C5323888101 Senders & Accessories110MM (4-3/8") Spinlock Nut for AcquaLink® & ViewLine GaugesFeatures: Spinlock nut for 110MM (4-3/8") ViewLine & AquaLink gauges White in color *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: A2C5323888101UPC Code: 7640178726840

Download LiteratureVDO B00059201 Senders & Accessories0-5 Volt LinkUp ConverterEasily installed LinkUp gateway modules replace the original wiring, delivering power to both the LinkUp device and the sensor from the NMEA 2000 backbone while being still compliant with the NMEA 2000 certification.Thanks to their passive wireless receiver, the configuration is done in a snap by using your mobile device and the LinkUp Configurator app available for Android and iOS devices. The parameters of the sensor are configured to type, instance, and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.Before describing the different versions of LinkUp, we would like to highlight the fact that this device is a money saver compared to an over-designed NMEA 2000 converter. It reduces wiring, since the complete device – consists of 3 parts: a 30 cm wire pigtail with a standard M12 connector with 5 pins, the LinkUp device itself containing the device electronics, notification LED, wireless interface to program the device, and the NMEA 2000 side wiring, which is the output of all the LinkUp variants and finally a sensor-side cable – including the wires is approx. 50 cm long when unrolled.The other benefits of this equipment are the contactless configuration with your smartphone, no need to spend money on an expensive HW, and no need for a power supply since the LinkUp is powered by NMEA.Last but not least, thanks to its air-sealed housing, the device can be installed in the engine compartment according to ISO 8846:1990 (protection against ignition of surrounding flammable gases). As with all our products, LinkUp is CE, Reach, and RoHS compliant.These powerful devices are fast, efficient, secure, safe, and cost-effective.Features: Wireless configurable via a smartphone app Customizable sensor curves Approved for engine compartments acc. to ISO8846:1990 Provides 5V-Source for passive sensors Alarms setup and transmission on NMEA 2000® Plug-and-Play installation NMEA 2000® certified Technical Specifications: Operating voltage - 12V (from NMEA 2000®) Input signal range - 0-5V Protection class - IP X9/K Power consumption - ≤ 100mA Output current on 5V-source - 15mA Output signal - NMEA 2000® Dimensions - 125 mm x 32 mm (+cables) Operating temperature - -30°C to +80°C Flammability - UL94 Housing material - PC-FR Compliance - CE, UKCA, Reach, RoHS, ISO8846:1990 In the Box: LinkUp Gateway – 0-5V  Veratron Card  Safety Manual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: B00059201UPC Code: 7640190290145VDO B00059201 Literature Download Owners Manual Product Brochure

VDO A2C1845710001 Senders & AccessoriesVideo Cable for OceanLink® Gauges 0 .3M LengthVideo cable 0.3 m for 7" OceanLink®.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: A2C1845710001UPC Code: 7640178728950

Moeller 395059-085SC Senders & AccessoriesMoeller 8-1/2" Sending Unit #395059-085SCNormalized SKU: 395059085SC

Moeller 395059-060SC Senders & AccessoriesMoeller 6" Reed Switch Sending Unit #395059-060SCNormalized SKU: 395059060SC

VDO A2C1747410001 Senders & AccessoriesDeep-Pipe Level Sender - 1100mm - 240 to 33 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 1100 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 240 to 33 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: A2C1747410001UPC Code: 7640178726253

Volvo Penta 858643 Senders & AccessoriesThe Volvo Penta FRONT RING 858643 is a precise match genuine part to protect your marine vessel from damage. Enhance performance ensuring peace of mind while sailing on the water. The product is UV proof, robust, and unlikely to rot over time than any other rubber o-rings. Volvo Penta FRONT RING 85864 is a circular-shaped fitting with a 52-millimeter diameter suited to a 60-millimeter hole covered with a 1-year limited warranty by Volvo Penta. Key Features: A circular fitting instrument with 52 mm diameter is suited for a hole with 60 mm diameter Exploded view with schematic instrument panel 24V (Volvo Penta) Covered with a 1-year limited manufacturer warranty Genuie OEM Volvo Penta Part (Part No: 858643) Product Specifications: Brand: Volvo Penta SKU: 858643 UPC: 858643 Weight: 0.02 LBS Size: 52 mm Unit Of Measure: EA Type: Front Ring Condition: New Manufacturer Part Number (MPN): 858643 Replaces Products: 858643, 828542 Volvo Penta Exploded view / schematic Instrument Panel 24VThis product replaces:858643Normalized SKU: 858643UPC Code: 858643

VDO A2C1720100001 Senders & AccessoriesDeep-Pipe Level Sender - 600mm - 0 to 180 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 600 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 0 to 180 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: A2C1720100001UPC Code: 7640178725652

VDO A2C1744290001 Senders & AccessoriesDeep-Pipe Level Sender - 300mm - 0 to 180 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 300 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 0 to 180 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: A2C1744290001UPC Code: 7640178725430

VDO 360406 Senders & Accessories Pressure sending unit sends the signal to a 400 PSI gauge. VDO pressure sender 400 PSI pressure rating Single station 1/8-27 inch NPT thread size 10-32 stud gauge terminals 10-32 stud ground terminal Works with European ohm scale oil pressure gauges Normalized SKU: 360406