Barton Marine 60460 Sailing Accessories4mm Dyneema Loop with High Load Eye - 12mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks, and toe rail blocks etc.The high-load eye, combined with the Dyneema loop, gives you a fast, efficient, simple, and extremely strong solution for changing the direction of any line. The hard anodised aluminium eye is designed to have very good wear-resistant properties with low friction, which, combined with the high-strength Dyneema loop, gives you an exceptional low weight to very high performance and load ratio.Features: High load eye compared to a standard plain bearing block on average across the range Friction increases by only 15% Strength increased by 272% Weight reduced by 51% Data based on using a 4mm D12 SK75 Dyneema core Normalized SKU: 60460UPC Code: 5035088604609

Barton Marine 60410 Sailing AccessoriesDeck Eye - Stainless Steel - 14mmStainless steel deck eyes with generous eye capacity.Specifications: Stainless Steel Deck Eye Single 14mm Height x 14mm Width x 5mm Fastenings Normalized SKU: 60410UPC Code: 5035088604104

Barton Marine 60362 Sailing AccessoriesDeck Plate with Fixing & Eye with Blanking Plug - M12 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each supplied with a stainless steel blanking plug. Designed to be mounted flush with the deck using three fixing bolts, the sealed internal thread prevents water ingress. The design prevents trip hazards on board when not in use. The range allows for a multitude of uses, including: temporary fixing eyes, boat tie downs, deck mounted boarding ladders, stand up blocks, davit mounts, life raft holders, dive tanks & other endless uses. Normalized SKU: 60362UPC Code: 5035088603626

Barton Marine 60360 Sailing AccessoriesDeck Plate with Fixing & Eye with Blanking Plug - M8 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each supplied with a stainless steel blanking plug. Designed to be mounted flush with the deck using three fixing bolts, the sealed internal thread prevents water ingress. The design prevents trip hazards on board when not in use. The range allows for a multitude of uses, including: temporary fixing eyes, boat tie downs, deck mounted boarding ladders, stand up blocks, davit mounts, life raft holders, dive tanks & other endless uses. Normalized SKU: 60360UPC Code: 5035088603602

Barton Marine 60191 Sailing AccessoriesStainless Steel Large Split Rings - 14mm - 10-PackFeatures: Easy-fit stainless steel split rings for use with our clevis pins Supplied in packs of 10 Normalized SKU: 60191UPC Code: 5035088601912

Barton Marine 52120 Sailing AccessoriesTubular Cleat - 6mmThese handy cleats have many uses where light loads are expected.Specifications: Weight: 5g Dimensions: 55mm x 13mm x 14mm Size: 55mm Fastenings: 4mm Normalized SKU: 52120UPC Code: 5035088521203

Barton Marine 42812 Sailing Accessories4mm Rope Stoppers - Black - PairRope Stoppers can also be referred to as parrel beads, tie balls, halyard stoppers, or stopper balls, and are primarily used in rope management.At the end of a line, Rope Stoppers serves as an easy-to-grab end knob, can be more reliable and effective than a stopper knot, and prevent the line from pulling through the sheave, fairlead, ferrule, or cleat.As part of overall rope management, Rope Stoppers serve to protect the eye splice and whipping twine used to terminate the line.Rope Stoppers will help the longevity and life of the line. Manufactured from Polypropylene plastic for durability and UV stability.Features: Perfect to put at the end of a piece of a line for increased grip. Prevents line from running through, jamming, or getting hung up on a variety of hardware. Helps in protecting all lines of all materials from damage. Color coded to help identify line usage. Normalized SKU: 42812UPC Code: 5035088087730

Barton Marine 32302 Sailing AccessoriesSpinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends.Plain bearing genoa cars, sliders, and spinnaker pole slides, plus stand-up blocks.A popular range of Genoa cars and sliders designed to run on 32mm (1-1/4”) T track. All are manufactured from high-quality marine-grade aluminium with our unique grey anodised finish for added protection.All cars and sliders featured on these pages have moulded nylon inserts to ensure free, smooth running under load and prevent damage to the finish or potential corrosion.All Genoa cars in this range are available in a heavy-duty version for larger craft or for larger load applications.Features: Grey anodized finish. Stainless steel plunger stops with positive action. Molded nylon slide inserts ensure free running. Large, easy grip plunger knobs. Heavy-duty Genoa car options. Cars and sliders are compatible with most makes of ‘T’ track. Modified slider inserts are available for obscure sizes. Normalized SKU: 32302UPC Code: 5035088323029

Barton Marine 25301 Sailing AccessoriesGenoa Slide Car (25mm)Designed with a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks.Plain bearing genoa cars, sliders, and spinnaker pole slides.A popular range of Genoa cars and sliders designed to run on 25mm (1”) T track. All are manufactured from high-quality marine-grade aluminium with our silver anodised finish for added protection.Features: Silver anodized finish Stainless plunger stops with positive action Molded nylon slide inserts ensure free running Large, easy grip plunger knobs. Cars and sliders are compatible with most makes of T-track. Normalized SKU: 25301UPC Code: 5035088253012

Barton Marine 60190 Sailing AccessoriesStainless Steel Split Rings - 10mm - 10-PackFeatures: Easy-fit stainless steel split rings for use with our clevis pins Supplied in packs of 10 Specifications: Weight: 3g Dimensions: 30mm x 30mm x 4mm Normalized SKU: 60190UPC Code: 5035088601905

Barton Marine 21055 Sailing AccessoriesCompact Winch Handle MountThis low-profile, anti-snag mount gives you a handy yet unobtrusive place to store your winch handle.Compact Winch Handle Mount 21055. This low-profile, anti-snag mount gives you a handy yet unobtrusive place to store your winch handle.Features: Low profile For all locking winch handles Normalized SKU: 21055UPC Code: 5035088210558

Download LiteratureWichard Marine 2490W Sailing Accessories5/16 Stainless Steel Sail Snap +Features: Grade 316L stainless steel forged sail snaps Easy to install (single-handed operation) Efficient use: no jamming of the system Specifications: Materials: 316L stainless steel grade Length (mm): 110 Working load (kg): 960 Breaking load (kg): 1300 Weight (g): 244 A (mm): 24 B (mm): 15 Applications:Perfect to hoist a storm jib or a staysail Normalized SKU: 2490WUPC Code: 3587790024906Wichard Marine 2490W Literature Download Quick Reference Guide

Download LiteratureHarken B10HOT Sailing AccessoriesCarbo OneTouch Locking Winch HandleLightweight and fast-acting, the Carbo OneTouch ball bearing locking winch handle makes grinding winches easy! Racers will maneuver faster and cruisers will have confidence in a reliable and easy-to-use winch handle. The Carbo OneTouch locks in and out of the winch using its patented locking mechanism and ergonomically designed grab bar. It only takes one hand to set or release the handle—squeeze anywhere along the grab bar with your palm to unlock; release the bar for a secure lock. Harken added SpeedGrip handle technology to the OneTouch for fast and efficient winching. Its independent swivel between the ball bearing knob and hand-grip allows fast trimming using the palm for low-loads, and powerful two-handed grinding when loads are high. At just 590 g (20.8 oz), the Harken Carbo OneTouch is built to be strong but lightweight. The grab bar and main handle are made of the same tough material as our Carbo block line: high-strength, fiber-reinforced composite, UV-stabilized for excellent protection against long-term exposure to saltwater and sun. The handle and grab bar are cross-ribbed and braced for enhanced stiffness. An aluminum grip rod mates seamlessly to a forged aluminum handle insert to manage bending stresses. The black hard-coat-anodized octagonal drive gear is also integrated into the molding process, resulting in an extremely strong, one-piece structure. Its locking pins are tough 316 marine-grade stainless steel. OneTouch is a registered trademark of Donald J. Steiner.Features: Molded urethane knob for comfortable feel and better grip when palming the handle. Handles feature an independent swivel between the knob and handle to keep the wrist straight and arms in the best power position while grinding. The patented locking mechanism features two stainless steel pins that automatically retract when the handle’s full-length grab bar is squeezed, and extend when it is released for a solid, secure lock. Handles feature a ball bearing grip that efficiently transmits power into the winch. Normalized SKU: B10HOTUPC Code: 097653275367Harken B10HOT Literature Download Quick Reference Guide Product Brochure

Download LiteratureBarton Marine 32100GTB Sailing Accessories32mm Pin Genoa Car Track Pin Stop Standard Duty - BlackBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The new range is a class above the norm and features molded nylon inserts to prevent damage to the low-friction anodized finish and ensure smooth running in all marine environments. All Genoa Cars in this range are available in a heavy-duty HD version for large craft or for larger load applications.Features: Spectro or Black anodized finish The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs with twist and lock facility Heavy-duty Genoa car options Normalized SKU: 32100GTBUPC Code: 5035088093335Barton Marine 32100GTB Literature Download Quick Reference Guide

Download LiteratureBarton Marine 32100GT Sailing Accessories32mm Pin Genoa Car Track Pin Stop Standard DutyBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The new range is a class above the norm and features molded nylon inserts to prevent damage to the low-friction anodized finish and ensure smooth running in all marine environments. All Genoa Cars in this range are available in a heavy-duty HD version for large craft or for larger load applications.Features: Spectro or Black anodized finish The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs with twist and lock facility Heavy-duty genoa car options Normalized SKU: 32100GTUPC Code: 5035088093328Barton Marine 32100GT Literature Download Quick Reference Guide

Download LiteratureBarton Marine T92100 Sailing AccessoriesTufnol Snatch Block for Wire & Fibreoptic CablesThe Barton wire snatch block has been developed specifically as a low maintenance static free block. The Tufnol sheave means that static cannot build up in the block and cause electrical discharge. Tufnol is a bearing-grade material so it gives a low-friction surface for the wire to run on and minimizes the number of moving components, giving it reliability and durability. The cheeks are made from marine grade 316 stainless steel as is the pin and retaining nuts. This block is ideal for commercial applications in the toughest of environments.Specifications: Safe Working Load: 350kg (770lbs) Break Load: 1500kg (3300lbs) Max Rope/Wire size: 10mm (3/8”) Weight: 78grms (2.8oz) Length: 190nn (7 ½”) Width: 115mm (4 ½”) Thickness (Maximum): 53mm (2 1/16”) Fibreoptic & Wire BendingFibreoptic cables and wire ropes require a minimum bend radius to stop failures. This block is suitable for both fibreoptics and wires up to 10mm in diameter. The large sheave means that the bend radius of the wire is not compromised and provides an additional engineered safety factor to prologue the life of wire if continual movement around the same section of wire is required. Normalized SKU: T92100UPC Code: 5035088093489Barton Marine T92100 Literature Download Quick Reference Guide

Download LiteratureBarton Marine 25100GTB Sailing Accessories25mm T-Track Genoa Car - BlackBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The range is a class above the norm and features moulded nylon inserts to fight corrosion prevent damage to the low friction anodise finish and ensure smooth running in all marine environments.Features: Spectro anodized finish or black anodized The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs Twist and Lock up plunger facility Normalized SKU: 25100GTBUPC Code: 5035088093311Barton Marine 25100GTB Literature Download Quick Reference Guide

Download LiteratureBarton Marine 25100GT Sailing Accessories25mm T-Track Genoa CarBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The range is a class above the norm and features moulded nylon inserts to fight corrosion prevent damage to the low friction anodise finish and ensure smooth running in all marine environments.Features: Spectro anodized finish or black anodized The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs Twist and Lock up plunger facility Normalized SKU: 25100GTUPC Code: 5035088093304Barton Marine 25100GT Literature Download Quick Reference Guide

Download LiteratureWichard Marine 11240 Sailing AccessoriesHR Bow Shackle - 14mm Diameter - 35/64"Features: Forged bow shackle in HR stainless steel grade (17,4 PH) Outstanding working and breaking load An HR shackle can be up to 60% more resistant than a shackle in 316L stainless steel WLL: only for industrial applications (lifting i.e…) CE marking and batch number Applications: Applications requesting high loads To be used when ample room is required Possibility to attach several lines or cables Do not use it for mooring applications Specifications: Materials: HR 17.4 PH stainless steel grade Working load: (lb) 11280 / (kg) 5120  WLL: (lb) 5290 / (kg) 2400  Breaking load: (lb) 26450 / (kg) 12000  Weight: (lb) 0.802 / (g) 364  Dimensions: A: (inch) 2 31/64" / (mm) 63  B: (inch) 1 7/64" / (mm) 28  C: (inch) 35/64" / (mm) 14  D: (inch) 1 7/64" / (mm) 28  D diameter: (inch) 35/64" / (mm) 14  E: (inch) 33/64" / (mm) 13  M: (inch) 2 53/64" / (mm) 72  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 High Resistance (HR) *Sold as an Individual Normalized SKU: 11240Wichard Marine 11240 Literature Download Quick Reference Guide

Sea-Dog 560106-1 Sailing AccessoriesRubberSpreader boots are designed to cover spreaders providing sail chafe protection. Aerodynamic they reduce drag and prevent sails from ripping or tearing from constant contact with spreader ends or shrouds. Constructed of UV resistant rubber. Easy to install. Three sizes available to match wire diameter. 560106 pictured.This product replaces:560106, 560106-1, 3-560106Normalized SKU: 5601061