Railblaza 08-4118-11 Rod Holder AccessoriesThe RAILBLAZA Rod Tube & MiniPort Kit has been designed to answer a lot of requests from customers. It is perfect for kayaks where anglers want to keep their reels elevated and clear of waves and splash. With the dropdown gimbal, you can either keep your reel high and dry, or slot the reel into the end of the tube. This kit comes with the RAILBLAZA MiniPort and all necessary hardware, so it is track ready right out of the package. Will also fit any of the other RAILBLAZA StarPort bases. Accepts baitcasting, spinning and conventional reels MiniPort TracMount base included Rod leash attachment point No tools required for installation Normalized SKU: 08411811UPC Code: 814162020635

Railblaza 08-0073-11 Rod Holder AccessoriesThe RAILBLAZA Visibility Kit II is a must-have safety item for any kayaker, canoer or recreational paddler. In one convenient, value-for-the-money pack you get everything you need for your kayak or canoe to be seen on the water day or night. This kayak light and boat stern light is Imana approved for Marine use. Simply mount the StarPort HD with the supplied fastenings, lock in the 3-foot ExtendaPole 1000, clip on the orange fluoro flag for daytime visibility, and lock the Illuminate i360 – all-round white navigation stern light into the port on top for safety and regulatory compliance at night. The i360 kayak stern light can also be fitted to other RAILBLAZA ports around the kayak, and the ExtendaPole 1000 can be used to display a dive or national flag, or combined with RAILBLAZA camera mounts as a camera pole. The RAILBLAZA ExtendaPole 1000 offers 3 different height adjustments if needed. The visibility kit is also a great stern light for Rib Boats, Jon Boats and other watercraft as well. The i360 kayak light has 3 different modes: high beam, medium beam, and blink. It uses 3 AA batteries and offers 25 hours or more of use in the high beam mode and over 200 hours of use in blinking mode. This light has been approved by the US Coast Guard for 2 nautical miles or more. Disassembly is quick and easy and the kit will store just about anywhere. RAILBLAZA Visibility Kit II includes i360 kayak stern light, daytime orange flag, StarPort HD base with mounting hardware and the ExtendaPole 1000 3 operating modes for the i360 kayak light (high, medium, and blink) 3 AA batteries are needed but not included Battery life varies from high mode at 25 hours or more on new batteries to over 200 hours in blinking mode Easily breaks down for storage Normalized SKU: 08007311UPC Code: 814162020888

Railblaza 08-0052-11 Rod Holder AccessoriesThe RAILBLAZA QUICKGRIP Paddle Clip was designed to make it easy to store your paddle, pole or even landing net. The universal design of the clip will fit most standard shafts from 1-1/8" to 1-3/8". There is 2-3/8" between screw holes, and the track nuts are included. Paddle holder is 2-3/4" wide so your paddle will never come out. Because of the design of the QUICKGRIP Paddle Clip, you do not need a secondary clip to hold your paddle or pole. The QUICKGRIP Paddle Clip comes track mountable right out of the package. The clip stands out from your track 3 inches to not crowd your interior space. The QUICKGRIP also offers the ability to mount the RAILBLAZA MiniPort TracMount to the hole between the thumb knobs, so you can add your favorite Railblaza Accessory. While this is a track mountable paddle holder, it is also able to mount directly to your kayak if you so choose with locknuts and washers. Works on most standard paddle or pole shafts from 1-1/8" to 1-3/8" 2-3/8" between screw holes Paddle holder is 2-3/4" wide Comes Track Mount ready right from the package Normalized SKU: 08005211UPC Code: 814162020468

Railblaza 04-4091-11 Rod Holder AccessoriesThe RAILBLAZA Kayak Motor Mount is a fast and simple way to mount your motor to your kayak using minimal effort. Being super easy to clip on and off, your kayak can change from paddle only, to motor ready in under 30 seconds. Supplied complete with two RAILBLAZA StarPort HDs and all mounting fasteners, this is the simplest way to attach a trolling motor to your kayak! For added customization, you can add a RAILBLAZA RailMount 32-41 or two for added rod holders, lights or camera mounts just behind the cockpit. Simplest way to attach a trolling motor to your kayak Includes all necessary hardware Quick transition from paddle only to motor ready Able to add RailMount 32-41s to the mount tube for added customization This bracket will fit almost all models of kayak, and is suitable for, but not limited to, the following motors Minn Kota, all transom mount models Normalized SKU: 04409111UPC Code: 814162020420

Railblaza 03-4157-11 Rod Holder AccessoriesThe E Series Cable Entry Port allows easy access for cables through the deck for tidy electronic mounting solutions. It works very well with all RAILBLAZA electronic mounts including fishfinder mounts, camera mounts, mobile device holders, and more. Features two flexible inserts catering for 3-7mm cables and one double entry insert for 2 x 6mm cables. Allows easy access for cables through the deck for tidy electronic mounting solutions Works very well with all RAILBLAZA electronic mounts including fishfinder mounts, camera mounts, mobile device holders, and more 2 x flexible inserts catering for 3-7mm cables 1 x double entry insert for 2 x 6mm cables. Normalized SKU: 03415711UPC Code: 814162021700

Railblaza 03-4149-11 Rod Holder AccessoriesThe RAILBLAZA Pontoon boat RailMount 28-32mm is a base mount that allows a secure and easy attachment of any RAILBLAZA accessories to your Pontoon boat rails. This marine rail mount is ideal for those who need to hold different accessories, or those wanting to change the location of their Rod Holder II, Fillet Table, Drink Holder, StowPod or any of the many RAILBLAZA accessories that fit your needs. The Pontoon Boat RailMount 28-32 is simply screwed together with no drilling required so that it can be easily moved from spot to spot, leaving your rail as good as new! The Pontoon Boat RailMount can be fitted to 28mm(1-1/8”) or 32mm(1-1/4”) square rails with ease. All installation hardware is provided including rubber grips and the required stainless-steel mounting screws. Rubber inserts avoid slippage when attached to rails StarPort locking slide secures accessories in place UV stabilized plastic Unique design avoids interference with rail wall Normalized SKU: 03414911UPC Code: 814162021076

Railblaza 02-4147-11 Rod Holder AccessoriesThe Swing Arm R-Lock is a great addition to your RAILBLAZA kit, adding the Swing Arm R-Lock lets you swing your fish finder display out of the way, move your chart plotter to a better angle, or swivel your camera or tablet with ease. With R-Lock on the top, and a friction joint on the bottom, you can set your viewing angle, and then just swing it out of the way. Includes stainless steel screws. Holds displays up to 1.5kg (3.3lbs) Also holds tablets, cameras, mobile phones Can be used for Lowrance, Garmin, and Humminbird sounder makes Goes with your RAILBLAZA Fish Finder Mount or other accessory Normalized SKU: 02414711UPC Code: 814162020994

Railblaza 02-4082-11 Rod Holder AccessoriesThe RAILBLAZA Rod Holder R is the little brother to the RodHolder II. Designed to hold fishing rods with spinning, baitcaster or fly reels. The stretchable strap at the front of the holder will wrap around the top for baitcasting reels and around the bottom for spinning reels. The Rod Holder R is a light duty rod holder. It is not designed for offshore trolling. Molded in rugged fiberglass reinforced plastic it will fit any vessel. Stainless steel mounting hardware is included. It will fit into any RAILBLAZA mounting Base. RAILBLAZA Rod Holder R for spinning reels, bait casting reels or fly reels Lightweight but strong with fiberglass reinforced plastic Includes RAILBLAZA StarPort HD Base Includes mounting hardware and mounting instructions Can be track mounted using the RAILBLAZA StarPort HD Track Nut Kit Normalized SKU: 02408211UPC Code: 814162020840

Railblaza 01-4155-11 Rod Holder AccessoriesThe TracLoader Gunnel Track goes on the gunnel or console of your boat, to let you easily fit rod holders, tackle storage, drink holders and many other useful accessories, tool-less and repositioned or put away in seconds. Designed for boats that do not have tracks installed giving them all the versatility of RAILBLAZA TracLoader StarPort Mounts. Great for fiberglass boats & aluminum boats with vertical gunnels or coamings. Available in 3 different lengths the anodized aluminum tracks with mounting slots and all fasteners supplied make for easy installation. Once it’s installed you simply choose the correct RAILBLAZA TracLoader Mount for your application. Includes: TracLoader Gunnel Track 500mm (20"), stainless hardware and nylon washers Installs on the gunnel or console of your boat Will easily fit rod holders, tackle storage, drink holders and many other useful accessories Perfect for fiberglass boats & aluminum boats with vertical gunnels or coamings TracLoader Mount sold separately Normalized SKU: 01415511UPC Code: 814162021519