Seaview LTBSF3 Mounting HardwareLTBSF3 Light Bar for Thermal Camera FLIR M300 Series for M2 Mounts Only - Must Pick a LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What's also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance.The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights. Extra Height ClearanceOn select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction. Only LTB-R, LTB-S and LTB-S24 can fold over. Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts. This does not apply to the LTB-SF, LTB-OA and LTB-OA-6 light bars. Specifications:Light/GPS Bracket = NONE Lean (FWD/Aft) = NONE Construction = NONENormalized SKU: LTBSF3

Seaview LTB-U1A1197 Mounting HardwareLight Bar with Perko 1197 & Threads for GPSThis Perko Light bar Top comes with the Perko 1197 incandescent light and threads for GPS or similar. Specifications:Construction = NONE Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: LTBU1A1197UPC Code: 727908835168

Seaview RW4-6 Mounting HardwareDirect Mount 4° Wedge for Furuno DRS4DRadar Wedge for Furuno 24" radar domes; Geonav 24" radar domes; JRC 15" radar domes; Simrad DX64S; Sitex 24" T761 radar domes (RW4-6) by Seaview®. Radar wedges are designed to be used directly between the radome and the mounting surface. This will compensate for deck angle or planing attitude of the boat. Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Fits directly underneath your radar. Features: Simple and Easy Installation: Pre-drilled to fit your specific radar, allowing for quick and easy hassle free installation Durable: Made from marine grade polymer King Starboard Engineered to high standards High-grade design delivers extended lifespan Made with premium materials Specifications:Construction = NONE Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: RW46UPC Code: 839662000611

Seaview SM-14-F Mounting HardwareMast Mount for FLIR Thermal Camera & Raymarine M-SeriesRaise your camera high and get the best view with a Seaview Camera Mast Mount.Heavy Duty Mounting FeetHeavy duty mounting feet attach the mount to the mast using six high strength rivets per feet. Specifications:Construction = NONE Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: SM14FUPC Code: 839662009423

  Download LiteratureSeaview SP3P Mounting HardwareSeaview DPOD Deck Power Pod BoxUncut medium MFD Pod, quick lock and release rotating baseOverall Dimensions: Width: 14.25" Height: 9.5" depth: 5.147" Max Usable Face: Width: 13.75" Height: 9" Max Cut Out Area: Width: 12.938" Height: 8.125" The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.Rotating BaseThe quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply pull the secure bolt out and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply push the secure bolt back in, it's so easy you can do it with one hand!ConstructionThe DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.Optional Accessory PodOne of the unique abilities with the DPOD is the ability to add optional side pods (SP1BOX). Currently no other instrument pod for power boats on the market has this feature. Depending on the DPOD box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. Specifications:Cut/Uncut = Uncut Mounting Style = Deck Usable Face = 13.75" x 9"Normalized SKU: SP3PUPC Code: 839662006620Seaview SP3P Literature Download  Product Brochure

  Download LiteratureSeaview SP2P Mounting HardwareSeaview DPOD Deck Power Pod BoxUncut small MFD Pod, quick lock and release rotating base.Overall Dimensions: Width: 12.305" Height: 7.555" Depth: 5.08" Max Usable Face: Width: 11.75" Height: 7" Max Cut Out Area: Width: 11" Height: 6.125" The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.Rotating BaseThe quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply pull the secure bolt out and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply push the secure bolt back in, it's so easy you can do it with one hand!ConstructionThe DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.Optional Accessory PodOne of the unique abilities with the DPOD is the ability to add optional side pods (SP1BOX). Currently no other instrument pod for power boats on the market has this feature. Depending on the DPOD box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. Specifications:Cut/Uncut = Uncut Mounting Style = Deck Usable Face = 11.75" X 7"Normalized SKU: SP2PUPC Code: 839662006613Seaview SP2P Literature Download  Product Brochure

  Download LiteratureSeaview SP5P Mounting HardwareSeaview DPOD Deck Power Pod BoxUncut THREE instrument Pod, quick lock and release rotating baseOverall Dimensions: Width: 15.25" Height: 5.5" Depth: 3.185" Max Usable Face: Width: 14.75" Height: 5" Max Cut Out Area: Width: 13.875" Height: 4.125" The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.Rotating BaseThe quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply pull the secure bolt out and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply push the secure bolt back in, it's so easy you can do it with one hand!ConstructionThe DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.Optional Accessory PodOne of the unique abilities with the DPOD is the ability to add optional side pods (SP1BOX). Currently no other instrument pod for power boats on the market has this feature. Depending on the DPOD box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. Specifications:Cut/Uncut = Uncut Mounting Style = Deck Usable Face = 14.75" x 5"Normalized SKU: SP5PUPC Code: 839662006637Seaview SP5P Literature Download  Product Brochure

Seaview LTB-SF Mounting Hardware1-1/4" Light BarSeaview's LTB-SF is specifically for FLIR's M-Series or Raymarine's T-Series Thermal Cameras and Search Lights, used with mounts ending in M2 only.*Requires LTB Top Normalized SKU: LTBSFUPC Code: 839662009225

Seaview ADA-S4 Mounting HardwareADA-S4Seaview's innovative new modular electronic mounts feature a unique universal plate design that provides a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate match up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes.This modular Top Plate fits all FB150 & FB250 domes. Specifications:Construction = Anodized Aluminum Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: ADAS4UPC Code: 839662009164

Seaview SM-18-A Mounting HardwareSM-18-AAll Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Features ultra heavy duty mounting feet. Made of a high quality marine grade aluminum that has been primed and powder coated.Fits KVH M5 Intellian i4 Raymarine 45 STV Sea King 1800HD Will fit masts 3-5/8" diameter or larger Specifications:Construction = Powder Coated Aluminum Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: SM18AUPC Code: 839662002431

Seaview ADA-S3 Mounting HardwareADA-S3Seaview's innovative new modular electronic mounts feature a unique universal plate design that provides a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate match up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes.This modular Top Plate fits: Glomex 20"-27" Satdomes (for modular parts ending in M2) Intellian i1 (for modular parts ending in M2) / i2 (for modular parts ending in M2) KVH M1 (for modular parts ending in M2) Thrane & Thrane Sailor FB500 (for modular parts ending in M2) / Fleet 55+ (for modular parts ending in M2) Raymarine 33STV (for modular parts ending in M2) VDO Ocean Line 132 (for modular parts ending in M2). Specifications:Construction = Anodized Aluminum Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: ADAS3UPC Code: 839662009157

Seaview SP2-MOD Mounting HardwareSP2-MODThis is a complete tapered Spreader Kit for Radar or Satdome applications with no additional accessories required. This fits Seaview modular parts ending in M2 only. Normalized SKU: SP2MODUPC Code: 839662009287

Seaview SP1-MOD Mounting HardwareSP1-MODThis is a complete tapered Spreader Kit for Radar or Satdome applications with no additional accessories required. This fits Seaview modular parts ending in M1 only. Normalized SKU: SP1MODUPC Code: 839662009270