Sold out NEW ARRIVAL -17% sale
00
DAYS
00
HRS
00
MIN
00
SEC
Tohatsu Tohatsu Prop Nut #353641210M $21.79 $26.01
Tohatsu 353641210M Propeller AccessoriesTohatsu Prop Nut #353641210MNormalized SKU: 353641210M
Sold out NEW ARRIVAL -17% sale
00
DAYS
00
HRS
00
MIN
00
SEC
Tohatsu Tohatsu Prop Stopper #348642320M $28.09 $33.52
Tohatsu 348642320M Propeller AccessoriesTohatsu Prop Stopper #348642320MNormalized SKU: 348642320M
Sold out NEW ARRIVAL -15% sale
00
DAYS
00
HRS
00
MIN
00
SEC
Tohatsu Tohatsu Washer Prop Nut #346641245M $7.72 $9.08
Tohatsu 346641245M Propeller AccessoriesTohatsu Washer Prop Nut #346641245MNormalized SKU: 346641245M
Sold out NEW ARRIVAL -17% sale
00
DAYS
00
HRS
00
MIN
00
SEC
Tohatsu Tohatsu Prop Nut #346641215M $11.49 $13.71
Tohatsu 346641215M Propeller AccessoriesTohatsu Prop Nut #346641215MNormalized SKU: 346641215M
NEW ARRIVAL -17% sale
00
DAYS
00
HRS
00
MIN
00
SEC
Solas Solas SDTW3 Suzuki Thrust Washer D-3/Gearcase DF-A #81011442 $33.51 $40.00
Solas 81011442 Propeller AccessoriesSolas SDTW3 Suzuki Thrust Washer D-3/Gearcase DF-A #81011442Normalized SKU: 81011442UPC Code: 824375052309
-15% sale
Solas Qualifies for Free Shipping Solas Gearcase Adapter Ring #73191005
00
DAYS
00
HRS
00
MIN
00
SEC
Solas Solas Gearcase Adapter Ring #73191005 $6.21 $7.30
Solas 73191005 Propeller Accessories The Solas 73191005 is a gearcase adapter ring designed specifically for use with Solas Rubex "D" series hub propellers that use a 4-1/4" hub diameter. The adapter ring is the interface component that allows the Rubex interchangeable hub system to seat correctly on the outboard or sterndrive gearcase. Without the correct adapter ring, the hub will not fit the shaft properly and the propeller will not install correctly. The Rubex hub system is Solas's interchangeable hub design, which allows boaters to swap propeller blades without replacing the entire hub assembly. The gearcase adapter ring is the piece that stays matched to a specific engine's gearcase configuration, while the outer hub and blade assembly can be changed as needed. This makes the Rubex system a cost-effective option for boaters who want to experiment with different pitch or diameter combinations without buying a complete propeller each time. Fitment is specific to the Rubex "D" series hub with a 4-1/4" hub diameter. Solas produces multiple adapter ring sizes and configurations to cover different engine gearcases, so confirming that your engine and hub series match this part number before ordering is important. Using the wrong adapter ring will result in an improper fit that can cause vibration, hub slippage, or damage to the gearcase. If your existing adapter ring is cracked, worn, or damaged from a strike or hard use, replacing it promptly is the right call. A compromised adapter ring puts stress on the hub system and the gearcase that adds up quickly at prop shaft speeds. Normalized SKU: 73191005UPC Code: 208478039205
Mercury Marine Qualifies for Free Shipping Mercury Prop Bore Sleeve #8M0214998
Mercury Marine Mercury Prop Bore Sleeve #8M0214998 $9.89
Mercury Marine 8M0214998 Propeller Accessories The Mercury Marine 8M0214998 is a prop bore sleeve designed to adapt the bore diameter of a propeller hub to fit the correct shaft size on compatible Mercury outboard engines. It's a small part that does a specific job, and getting the right one matters more than most people realize until they're standing on a dock wondering why their prop won't seat properly. This sleeve installs inside the propeller bore and provides a precise fit between the propeller hub and the drive shaft. It is an OEM Mercury Marine replacement part, so it meets the same tolerances and material specs as what came on your engine originally. No guessing, no shimming, no improvising. OEM Mercury Marine replacement part Part Number: 8M0214998 Fits compatible Mercury outboard applications requiring bore size adaptation Designed for use with Mercury propeller hubs Sold individually If you're unsure whether this sleeve fits your specific engine and propeller combination, cross-reference your engine's model and serial number against Mercury's parts catalog before ordering. Normalized SKU: 8M0214998UPC Code: 678633181047
Sold out -17% sale
EMP Qualifies for Free Shipping EMP Thrust Washer for OMC 120-130 HP 160-165 HP 200-235 HP Prop Shafts #93-08637
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Thrust Washer for OMC 120-130 HP 160-165 HP 200-235 HP Prop Shafts #93-08637 $18.58 $22.18
EMP 93-08637 Propeller Accessories The thrust washer on a propshaft is one of those components that quietly absorbs a tremendous amount of force every time the engine is in gear. The EMP 93-08637 Thrust Washer is a direct-fit replacement for OMC propshafts across a wide range of engines — 3.0L 4-cylinder models from 120 to 130 HP, 4.3L V6 engines from 160 to 165 HP, and 5.0L to 5.8L V8 applications from 200 to 235 HP. That's a solid spread of the OMC sterndrive lineup covered by a single part. The thrust washer sits between the propeller and the gearcase, managing the axial load that's generated every time the propeller pushes the boat through the water. Forward thrust, reverse braking, and the shock loads from waves and throttle changes all pass through this washer. When it wears thin or becomes damaged, that load transfers to surfaces it wasn't meant to contact — leading to accelerated wear on the propshaft, gearcase housing, or propeller hub. Replacing a worn thrust washer is a straightforward fix that protects a lot of more expensive components downstream. EMP manufactures the 93-08637 to OEM-equivalent specifications, matching the original thickness, diameter, and material for correct load distribution and a proper fit on compatible OMC propshafts. It installs without modification as part of a propeller service or gearcase rebuild. Key Features: EMP replacement thrust washer Part Number: 93-08637 Compatible with OMC 3.0L 4-cyl propshafts, 120–130 HP Compatible with OMC 4.3L V6 propshafts, 160–165 HP Compatible with OMC 5.0L–5.8L V8 propshafts, 200–235 HP OEM-equivalent thickness, diameter, and material Direct replacement — no modification required Confirm your engine's model and serial number before ordering. OMC produced several propshaft configurations across this engine range, and verifying the correct thrust washer for your specific application ensures proper fit and load distribution from the first run. Normalized SKU: 9308637UPC Code: 840080403359
Sold out -12% sale
EMP Qualifies for Free Shipping EMP Thrust Ring #93-08611
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Thrust Ring #93-08611 $12.95 $14.56
EMP 93-08611 Propeller Accessories The thrust ring might be one of the smallest parts in your prop assembly, but it is doing real work every time you are on the water. Positioned on the propshaft between the propeller and the gearcase, it acts as a spacer and load-bearing surface that helps manage the axial thrust generated as the prop spins. Without it, or with a worn one in place, you can end up with excess play on the shaft, uneven prop seating, and accelerated wear on components that cost a lot more to replace. The EMP 93-08611 Thrust Ring is designed specifically for MerCruiser MR and Alpha One drive propshafts. It is a direct OEM-specification replacement, so it fits the same way the original did and requires no modification. If you are pulling a prop for any reason, whether it is a routine inspection, a hub replacement, or a seal job, this is a good part to have on hand. Thrust rings are inexpensive enough that replacing one during a service visit is just good practice. EMP manufactures this to the same dimensions and material standards as the factory part, giving you a reliable replacement without the dealer price tag. Compatibility and specs at a glance: Fits MerCruiser MR and Alpha One drive propshafts Manages axial thrust load between propeller and gearcase Direct OEM-specification replacement No modification required for listed applications Manufactured by EMP Normalized SKU: 9308611UPC Code: 840080437743
Sold out -17% sale
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Thrust Bearing #31-31517 $62.97 $75.56
EMP 31-31517 Propeller AccessoriesThis product replaces:840080425382, 93341-93020-00Normalized SKU: 3131517UPC Code: 840080425382
Sold out -6% sale
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Thrust Bearing #31-07624 $19.20 $20.33
EMP 31-07624 Propeller AccessoriesThis product replaces:389297, 840080466385Normalized SKU: 3107624UPC Code: 840080466385
Sold out -16% sale
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Thrust Bearing #31-02130 $16.00 $19.02
EMP 31-02130 Propeller AccessoriesThis product replaces:840080461052Normalized SKU: 3102130UPC Code: 840080461052
Sold out -17% sale
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Thrust Bearing #31-02055 $23.23 $27.73
EMP 31-02055 Propeller AccessoriesThis product replaces:840080406718, 18-1125-9, 18-1125Normalized SKU: 3102055UPC Code: 840080406718
Sold out -9% sale
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Thrust Bearing #31-01868 $17.19 $18.85
EMP 31-01868 Propeller AccessoriesThis product replaces:388027, 840080456171Normalized SKU: 3101868UPC Code: 840080456171
Sold out -16% sale
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Thrust Washer #31-01807 $8.14 $9.58
EMP 31-01807 Propeller AccessoriesThis product replaces:840080433592Normalized SKU: 3101807UPC Code: 840080433592
-17% sale
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Tab Washer #14-14000 $15.24 $18.19
EMP 14-14000 Propeller AccessoriesThis product replaces:6G5-45383-01-00, 840080423463Normalized SKU: 1414000UPC Code: 840080423463
-17% sale
EMP Qualifies for Free Shipping EMP Tab Washer Mercury/Mariner V6 200-300 HP Outboard #14-02634
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Tab Washer Mercury/Mariner V6 200-300 HP Outboard #14-02634 $18.58 $22.18
EMP 14-02634 Propeller Accessories This tab washer fits 1983-2009 Mercury/Mariner V6, 200-300 HP outboard propshafts and bearing carriers. The tab washer locks the propeller nut in place, preventing it from backing off under load. It's a small part with a specific job, and skipping it or reusing a bent-up one during a prop swap is the kind of shortcut that can cost you a prop on the water. This EMP tab washer is a direct replacement for Mercury 18323 and 17460. Fits: 1983-2009 Mercury/Mariner V6, 200-300 HP outboards Application: propshaft and bearing carriers Replaces Mercury: 18323, 17460 Also crosses with: Sierra: 18-2298 GLM: 11381 Mallory: 9-72640 Normalized SKU: 1402634UPC Code: 840080493770
-16% sale
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Tab Washer #14-00045 $2.31 $2.72
EMP 14-00045 Propeller AccessoriesThis product replaces:840080485843Normalized SKU: 1400045UPC Code: 840080485843
Sold out -17% sale
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Thrust Washer #12-26151 $22.30 $26.62
EMP 12-26151 Propeller AccessoriesThis product replaces:840080456737, 320115Normalized SKU: 1226151UPC Code: 840080456737
Sold out -17% sale
00
DAYS
00
HRS
00
MIN
00
SEC
EMP EMP Thrust Washer #12-12101 $37.79 $45.34
EMP 12-12101 Propeller AccessoriesThis product replaces:397566, 840080453347Normalized SKU: 1212101UPC Code: 840080453347

Frequently Asked Questions

First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!

Yes, we offer FREE Shipping on most orders over $149 to US-48*.

Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.

  • Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
  • Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
  • Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
  • Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
  • Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
  • In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store

Below the price of the item, on the product page, there is a message indicating the availability of the product.

The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.

We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.

If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.

Free Shipping

On most orders $149+ to the continental 48 US states.

Secure Shopping

Fast, secure checkout with a variety of payment methods.

Shop with confidence

25+ years serving the marine industry.

Support center

Need help? Contact us via live chat, phone, or email.