00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Rod Light Speed with Deck Track Mount #RAP-370-D
$80.49
$91.21
Ram Mounts RAP-370-D Mounting HardwareRAM-Rod Light-Speed holder with deck track base, is a must have for the fishing enthusiast. Designed to mount onto a horizontal surface in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Additional Features
Unique design offers quick and easy removal and replacement of rod.
Simple and easy adjustment allows for tilting up and down as well as upright for rod storage
Unique design integrates removing the rod and setting the hook seamlessly, equaling less missed fish strikes.
Lifetime Warranty
Made in the USA
Fishing Recommendations:The primary intention of this mount is for either fresh water or salt water usage. Material: High Strength Composite RAM Mount Type: Fishing Rod HoldersSpecifications:Finish = NONE Length (Inches) = NONE Mounting Style = NONE Angle = NONE Construction = NONE Diameter (Inches) = NONERAM MOUNT RAM ROD LIGHT SPEED W/ DECK TRACK MOUNTNormalized SKU: RAP370DUPC Code: 793442926617
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Rod Light Speed with Flush-Mount #RAP-370-F
$59.99
$67.86
Ram Mounts RAP-370-F Mounting HardwareRAM-Rod Light-Speed holder with flush base, is a must have for the fishing enthusiast. Designed to mount onto a horizontal surface in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Additional Features
Unique design offers quick and easy removal and replacement of rod.
Simple and easy adjustment allows for tilting up and down as well as upright for rod storage
Unique design integrates removing the rod and setting the hook seamlessly, equaling less missed fish strikes.
Lifetime Warranty
Made in the USA
Fishing Recommendations:The primary intention of this mount is for either fresh water or salt water usage. Material: High Strength Composite RAM Mount Type: Fishing Rod HoldersSpecifications:Finish = NONE Length (Inches) = NONE Mounting Style = NONE Angle = NONE Construction = NONE Diameter (Inches) = NONERAM MOUNT RAM ROD LIGHT SPEED W/ FLUSH MOUNTNormalized SKU: RAP370FUPC Code: 793442926624
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanstrut Satcom Pole System 6.4' Raymarine STV45/Intellian I4 #SC105-45R
$168.87
$214.47
Download LiteratureScanstrut SC105-45R Mounting HardwareSC105-45R Satcom Pole Mount - 6'Totally universal, the Scanstrut SC105-45R Pole Mount installs your satcom onto the deck or transom of your boat.Supplied as a complete kit, you will have everything you need for a quick and easy installation. The anodized aluminium base gives choice when deciding where you wish to install the pole mount, it has a rotation of 360 degree that enables the pole to be installed on both sloping transoms and level decks. The Pole features two cable channels with a cover strip to hold cables in place and out of view. Made from marine-grade aluminium and coated with a 4-step marine paint system, making sure that your pole mount stays looking its best year in, year out, whatever the oceans throw at it.Compatible with:
Intellian - d4, i4, k4 satellite domes
Raymarine - 45STV satellite dome
Features:
Adjustable base, able to rotate 360°. Base enables the pole to be installed on both sloping transoms and level decks.
Unique pole extrusion accommodates two (2) cable channels with a cover strip to hold cables in place
Supplied with two support modules providing maximum fore / aft and sideways bracing
Easily removed for racing or winter storage, leaving just low profile base on deck
Technical Specifications:
Satellite Type - Dome
Material - Aluminium
Height - 6.4" (1.9M)
Mounting Type - Pole Mount
In the Box:
Pole mount
Top plate
Deck strut
Mounting hardware
Installation manual
*Sold as an Individual SCANSTRUT SATCOM POLE SYSTEM 6.4' F/ RAY STV45 INTELLIAN I4Normalized SKU: SC10545RUPC Code: 5060114793637Scanstrut SC105-45R Literature Download Quick Reference Guide
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Knob with Keyed Lock and 1/4" 20 Brass Hole #RAM-KNOB3LU
$39.49
Ram Mounts RAM-KNOB3LU Mounting HardwareThe RAM Locking Knob includes a brass 1/4"-20 thread, for 1" (B size) socket arms; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it.Material:Powder coated marine grade aluminumNote: The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: B SizeRAM MOUNT KNOB W/ KEYED LOCK AND 1/4" - 20 BRASS HOLENormalized SKU: RAMKNOB3LUUPC Code: 793442900518
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanpod Deck Pod Deep Uncut Usable Face 10.3" x 15.0" White #SPD-12D-W
$575.89
$718.78
Download LiteratureScanstrut SPD-12D-W Mounting HardwareScanpod - Deck Pod Deep Uncut - Usable Face 10.3" x 15.0" - WhiteSpecifications:
Color: White
Depth: 7.0"
Case Depth: Deep
Usable Face: 10.3H x 15.0W
Scanpod RangeThe exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot controls onto yachts and powerboats.Features:
Simplified range - easy product selection
Manufactured from acrylic caped ABS plastic - tough, durable and UV stable
Tamper proof stainless fastenings - secure install without self-tapping into plastic
Innovative watertight seal system - full instrument protection supplied uncut to fit any display
Deck Pods:A range of universal pods to install displays onto your powerboat, commercial vessel, RIB or sailboat wheelhouse.Features:Swivel / tilt base - provides level mount on any angled slopes and locks / unlocks into position Specifications:Mounting Style = NONE Usable Face = 10.3" x 15.0" Cut/Uncut = UncutSCANPOD DECK POD UNCUT USABLE 10.3 X 15.0 DEEP WHITENormalized SKU: SPD12DWUPC Code: 5060114791831Scanstrut SPD-12D-W Literature Download Quick Reference Guide
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanpod Helm Pod 4 Instrument Uncut Usable Face 4.3" x 19.7" #SPH-4I-W
$40.04
$48.04
Scanstrut SPH-4I-W Mounting HardwareScanpod Helm Pod 4 Instrument Uncut - Usable Face 4.3" x 19.7" - WhiteSpecifications:
4 Instrument
Color: White
Depth: 3.2"
Usable Face: 4.3H" x 19.75W"
Scanpod RangeThe exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboatsFeatures:
Simplified range - easy product selection
Manufactured from acrylic caped ABS plastic - tough, durable and UV stable
Tamper proof stainless fastenings - secure install without self-tapping into plastic
Innovative watertight seal system - full instrument protection supplied uncut to fit any display
Specifications:Mounting Style = NONE Usable Face = 4.3" x 19.7 Cut/Uncut = UncutSCANPOD HELM POD 4 INSTRUMENT USABLE FACE 4.3 X 19.7 WHITENormalized SKU: SPH4IWUPC Code: 5060114791596
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanpod Helm Pod Deep Uncut Usable Face 8.6" x 12.8" White #SPH-8D-W
$457.88
$571.49
Download Literature Watch VideoScanstrut SPH-8D-W Mounting HardwareScanpod Helm Pod Deep Uncut - Usable Face 8.6" x 12.8" - WhiteSpecifications:
Color: White
Depth: 6.3"
Case Depth: Deep
Usable Face: 8.6H" x 12.8W"
Scanpod RangeThe exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboatsFeatures:
Simplified range - easy product selection
Manufactured from acrylic caped ABS plastic - tough, durable and UV stable
Tamper proof stainless fastenings - secure install without self-tapping into plastic
Innovative watertight seal system - full instrument protection supplied uncut to fit any display
Specifications:Mounting Style = NONE Usable Face = 8.6" x 12.8" Cut/Uncut = UncutSCANPOD HELM POD UNCUT USABLE FACE 8.6 X 12.8 DEEP WHITENormalized SKU: SPH8DWUPC Code: 5060114791473Scanstrut SPH-8D-W Literature Download Quick Reference GuideScanstrut SPH-8D-W Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanpod Helm Pod Deep Uncut Usable Face 12.2" x 17.3" White #SPH-15D-W
$534.91
$667.64
Download Literature Watch VideoScanstrut SPH-15D-W Mounting HardwareScanpod Helm Pod Deep Uncut - Usable Face 16.7" x 13.7" - WhiteSpecifications:
Color: White
Depth: 7.0""
Case Depth: Deep
Usable Face: 16.7H" x 13.7W"
Scanpod RangeThe exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboatsFeatures:
Simplified range - easy product selection
Manufactured from acrylic caped ABS plastic - tough, durable and UV stable
Tamper proof stainless fastenings - secure install without self-tapping into plastic
Innovative watertight seal system - full instrument protection supplied uncut to fit any display
Specifications:Mounting Style = NONE Usable Face = 12.2" x 17.3" Cut/Uncut = UncutSCANPOD HELM POD UNCUT USABLE FACE 12.2 X 17.3 DEEP WHITENormalized SKU: SPH15DWUPC Code: 5060114791558Scanstrut SPH-15D-W Literature Download Quick Reference GuideScanstrut SPH-15D-W Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Davis Instruments
Davis Mounting Tripod #7716
$206.68
$262.50
Download LiteratureDavis Instruments 7716 Mounting HardwareMounting TripodOptional tripod makes installation even easier. Brackets at the base of each leg tilt to mount on your roof or uneven terrain. Made of galvanized steel. Includes two .92 m -long poles, which may be used separately or together to make a single 1.77m- long pole. Specifications:Humidity = NONE Remote Monitoring = NONE Temperature = NONE Wind = NONE Wireless = NONE Barometric Pressure = NONE Barometric Trend = NONEDAVIS MOUNTING TRIPODNormalized SKU: 7716UPC Code: 011698771608Davis Instruments 7716 Literature Download Owners Manual
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Seaview
Seaview SS Light GPS Bar for SS Power Mounts #LTB-SS
$163.03
$207.06
Seaview LTB-SS Mounting HardwareStainless Steel Universal Light/GPS Bar for All Stainless Steel Power Mounts Specifications:Lean (FWD/Aft) = NONE Light/GPS Bracket = NONE Construction = NONESEAVIEW STAINLESS STEEL LIGHT GPS BAR FOR SS POWER MOUNTSNormalized SKU: LTBSSUPC Code: 839662002233
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Garmin
Garmin Suction Cup Mount for 1490T #010-11375-00
$25.70
$30.67
Garmin 010-11375-00 Mounting HardwareSuction Cup Mount Access your nüvi® device while navigating your vehicle with this suction cup mount. Includes:
Mount
Cradle
Compatible Devices:
nüvi® 1450
nüvi® 1450LM
nüvi® 1450LMT
nüvi® 1450T
nüvi® 1490LMT
nüvi® 1490T
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. GARMIN SUCTION CUP MOUNT F/ 1490TNormalized SKU: 0101137500UPC Code: 753759097189
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Cradle for Garmin nuvi 2xxw Series #RAM-HOL-GA25U
$11.55
$13.78
Watch VideoRam Mounts RAM-HOL-GA25U Mounting HardwareThis RAM high strength composite cradle is designed to hold the following devices: Garmin nuvi 200wGarmin nuvi 205wGarmin nuvi 250wGarmin nuvi 255wGarmin nuvi 260wGarmin nuvi 265wtMaterial:High Strength Composite Note:The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system. RAM Mount Type: GPS MountsRAM MOUNT CRADLE FOR GARMIN NUVI 2XXW SERIESNormalized SKU: RAMHOLGA25UUPC Code: 793442910777Ram Mounts RAM-HOL-GA25U Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Universal Plastic ATV Holder #RAM-HOL-UN4U
$37.65
$44.94
Download Literature Watch VideoRam Mounts RAM-HOL-UN4U Mounting HardwareRAM Universal Finger-Grip Phone/Radio HolderThe RAM Composite Universal Finger Grip Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. This mount is designed to hold the following devices:Cell Phones2-Way RadiosGPS DevicesHeight Dimensions:Minimum with Top and Bottom Plates: 5.25"Maximum with Top and Bottom Plates: 6.0"The top and bottom plates can be removed for larger devices.Spine Plate Dimensions: 2.5W x 5.0H"Using Short Arm Side Clamps:Maximum Depth: 0.75"Minimum Width: 1.25"Maximum Width: 3.0"Using Medium Arm Side Clamps:Maximum Depth: 1.25"Minimum Width: 1.5"Maximum Width: 3.5"Using Long Arm Side Clamps:Maximum Depth: 1.6"Minimum Width: 2.25"Maximum Width: 3.5" Material:High Strength CompositeNote:The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: Rail & Handle Bar MountsRAM MOUNT UNIVERSAL PLASTIC ATV HOLDERNormalized SKU: RAMHOLUN4UUPC Code: 793442905575Ram Mounts RAM-HOL-UN4U Literature Download Quick Reference GuideRam Mounts RAM-HOL-UN4U Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Cradle for Garmin 60 Series #RAM-HOL-GA12U
$11.39
$13.60
Watch VideoRam Mounts RAM-HOL-GA12U Mounting HardwareThis RAM high strength composite cradle is designed to hold the following devices: Garmin Astro 220Garmin GPS 60Garmin GPSMAP 60Garmin GPSMAP 60CGarmin GPSMAP 60CSGarmin GPSMAP 60CSxGarmin GPSMAP 60Cx Material:High Strength Composite Note:The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system. *The RAM-HOL-GA12U RAM cradle requires the standard belt clip button which is included with the purchase of the GPS unit from Garmin. RAM Mount Type: GPS MountsRAM MOUNT CRADLE FOR GARMIN 60 SERIESNormalized SKU: RAMHOLGA12UUPC Code: 793442900310Ram Mounts RAM-HOL-GA12U Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Horizontal Single Arm Ball Mount Gimbal Bracket #RAM-109HSB
$91.49
$108.68
Watch VideoRam Mounts RAM-109HSB Mounting HardwareRAM Single Arm Ball Mount HorizontalThe RAM single swing and socket arm mount includes a 6" STRAIGHT swing arm mounted on a horizontal surface mounting base. At the end of the mount is a rectangular 6.25" x 2" top base. The pivoting point of the rectangle base allows 180 degree rotation, the swing arm allows a 360 degree rotation. RAM Marine Electronic Mounts PageRAM-109HSB DimensionsA. Center of knob to center of ball socket: 6"B. Overall length of swing arm assembly: 10.75"C. Height from base to top of knob: 4.89" Part number reflects product packaged in clear clam shell for store shelf display. For additional specifications, see components and drawings tabs. Ball Size: 1.5 Inch Rubber Ball Material: Powder Coated Marine Grade Aluminum Color: Black Powder Coat RAM Mount Type: Swing Arm MountsRAM MOUNT HORIZONTAL SINGLE ARM BALL MOUNT GIMBAL UND 15LBNormalized SKU: RAM109HSBUPC Code: 793442202353Ram Mounts RAM-109HSB Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Trolling Motor Stabilizer with Long Arm #RAM-108-DU
$95.49
$106.69
Watch VideoRam Mounts RAM-108-DU Mounting HardwareRAM Trolling Motor Stabilizer Mount with Long Double Socket ArmThe RAM-108-DU consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 0.5" to 2" in diameter. The trolling motor stabilizer will take every bit of the vibration out of your trolling motor while all the time protecting the head, shaft and mount from damage. A must for any angler with a bow mount trolling motor.The maximum allowable distance between the mounting surface on the boat and the lowest point of the trolling motor shaft is 12". Distances shorter than this are compatible. Strap Dimensions:0.5" to 2" Features:1. Reduces bouncing on the water or when transporting your boat2. Ideal for rough water conditions3. Holds trolling motor in place4. Reduces shock and vibration5. Lifetime warrantyMaterial:Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size RAM Mount Type: Marine Electronics MountsRAM MOUNT TROLLING MOTOR STABILIZER W/ LONG ARM #108-DUNormalized SKU: RAM108DUUPC Code: 793442010828Ram Mounts RAM-108-DU Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Humminbird/Lowrance Elite/Mark Series Units Under 10 lbs #RAM-107U
$74.49
$75.02
Watch VideoRam Mounts RAM-107U Mounting HardwareRam Mount - Humminbird - Lowrance Elite/MarkThe RAM-107U Humminbird and Apelco Series RAM mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment point at the cradle bases. With a twist of the arm knob, you can move the Humminbird and Apelco marine mount to your optimum viewing position. The RAM-107 is compatible with the following marine fishfinder models:Humminbird 700 SeriesHumminbird 500 SeriesHumminbird 300 SeriesHumminbird 100 SeriesHumminbird Matrix Series (excluding Matrix 97)Lowrance Elite SeriesLowrance Mark SeriesMaterial: Powder Coated Marine Grade Aluminum Ball Size 1.5" Rubber Ball Size RAM Mount Type: Marine Electronics MountsRAM MOUNT HUMMINBIRD PIRANHA MOUNT F/ UNITS UNDER 10 LBSNormalized SKU: RAM107UUPC Code: 793442001079Ram Mounts RAM-107U Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Base UBolt Mount Requires RAM Cradle #RAM-B-149ZU
$42.29
$50.74
Watch VideoRam Mounts RAM-B-149ZU Mounting HardwareThe u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware that accommodates rails from 0.75" to 1.25" in diameter. Material:Powder Coated Marine Grade Aluminum Note:The "U" in the part number reflects product packaged in poly bag. If you prefer a motorcycle mount with stainless steel hardware, view the RAM-B-149U. To accommodate rails smaller than 0.75" in diameter RAM provides the extension RAP-319U. RAM Mount Type: Rail & Handle Bar MountsSpecifications:Finish = NONE Length (Inches) = NONE Mounting Style = NONE Angle = NONE Construction = NONE Diameter (Inches) = NONERAM MOUNT U BOLT MOUNT REQUIRES CRADLENormalized SKU: RAMB149ZUUPC Code: 793442149009Ram Mounts RAM-B-149ZU Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanstrut Flex Mount for 10" and 12" Helm Pods #SPFM-RM1-12
$365.43
$456.10
Scanstrut SPFM-RM1-12 Mounting HardwareScanpod Flex-Mount System - Rail MountUse with Scanstrut Helm Pod models on low rails, powerboat consoles, twin helm yachts, etc.Features:
Allows display to be rotated to be viewed from any angle
Locks and unlocks into position
Tilt display forward and back for improved instrument viewing
Fits range of rail sizes
Specifications:Mounting Style = NONE Usable Face = NONE Cut/Uncut = NONESCANSTRUT 12" POD FLEX MOUNT F/ 10" & 12" HELM PODS ONLYNormalized SKU: SPFMRM112UPC Code: 5060114792630
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanstrut Radar Pole Mount 6' Kit for Raymarine 2kW & 4kW Dome #SC101
$134.37
$166.81
Download LiteratureScanstrut SC101 Mounting HardwareScanstrut's SC101 Pole Mount allows installation of your radar or 30cm or 40cm satcom antenna onto the deck or transom of your boat.Features:
Adjustable base, able to rotate through 360x and angle from horizontal all the way to vertical
Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
Supplied with two support modules providing maximum fore / aft and sideways bracing
Easily removed for racing or winter storage, leaving just low profile base on deck
Dimensions:
1.9m / 6.4' recommended for deck mounting
3" diameter pole
Base diameter of just 80mm / 3.1"
Materials:
Marine grade 6082 aluminium pole
Polyester powder coated for a durable and gloss white finish
Kit includes:
1 x Pole (complete with 2 x cable cover strips)
1 x Adjustable base
1 x Top for radar / satcom antenna
1 x 1200mm / 3.9' deck strut
1 x Rail stand off for 25mm / 1" rail SCANSTRUT RADAR POLE MOUNT 6' KIT FOR RAYMARINE 2KW AND 4KW
Normalized SKU: SC101UPC Code: 5060114790582Scanstrut SC101 Literature Download
Quick Reference Guide
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.