00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM 2.5" Round Base with 1.5" Ball 3/8"-16 Post #RAM-202CU
$24.49
$24.51
Ram Mounts RAM-202CU Mounting HardwareRAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 3/8"-16 Threaded Male Post for CamerasThe RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 3/8"-16 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 3/8"-16 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: C SizeNormalized SKU: RAM202CUUPC Code: 793442020230
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Rugged-Use Marine Electronics Base with 1.5" Ball #RAM-107BU
$26.74
$31.91
Ram Mounts RAM-107BU Mounting HardwareRAM 1.5" Ball Marine Electronic "RUGGED USE" Base for the Humminbird 100, 300, 500, 700 Series, Matrix Series and Lowrance Elite-5 SeriesThe RAM-107BU is a marine grade aluminum base with 1.5" rubber ball. The base connects to the underside of Humminbird and Raymarine marine GPS devices listed below. This base is compatible with the following electronic devices: Humminbird 700 SeriesHumminbird 500 SeriesHumminbird 300 SeriesHumminbird 100 SeriesHumminbird Matrix Series (excluding Matrix 97)Lowrance Elite-5Lowrance Elite-5MLowrance Elite-5XRaymarine Apelco Fishfinder with matching hole pattern Ball Size:1.5" Rubber Ball Size Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. The RAM-107BU is a "rugged use" base, designed to hold large marine electronic devices. RAM Mount Type: C SizeRAM Mount Type: Marine Electronics MountsNormalized SKU: RAM107BUUPC Code: 793442010712
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Double Socket Short Arm with 2.5" Round Base 1.5" #RAM-103U-B
$42.59
$51.10
Ram Mounts RAM-103U-B Mounting HardwareRAM Mount 1.5 Inch Ball Short Arm with 2.5 Inch Round BaseThe RAM Mount RAM-103U-B mount, with short arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size:1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: Surface MountSpecifications:Component 1 = NONE Component 2 = NONE Component 3 = NONE Component 4 = NONE Component 5 = NONE Component 6 = NONENormalized SKU: RAM103UBUPC Code: 793442913167
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM 2.5" Round Base with 1.5" Ball 1/4"-20 Camera Post #RAM-202AU
$24.65
$29.42
Ram Mounts RAM-202AU Mounting HardwareRAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 1/4"-20 Threaded Male Post for CamerasThe RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: C SizeNormalized SKU: RAM202AUUPC Code: 793442020216
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Double Socket Arm with 2.5" Round Base 1.5" Ball #RAM-103U
$44.76
$53.71
Ram Mounts RAM-103U Mounting HardwareRAM Mount 1.5 Inch Ball Double Socket Arm with 2.5 Inch Round BaseThe RAM Mount RAM-103U mount, with standard arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size:1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: Surface MountSpecifications:Component 1 = NONE Component 2 = NONE Component 3 = NONE Component 4 = NONE Component 5 = NONE Component 6 = NONENormalized SKU: RAM103UUPC Code: 793442913150
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Double Socket Small Arm with Locking Knob 1.5" Ball #RAM-201U-BL
$58.49
$65.14
Ram Mounts RAM-201U-BL Mounting HardwareRAM Double Socket Arm with Small Size Locking Knob for 1.5" Ball BasesThe RAM-201U-BL, standard double socket arm with small size locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The locking knob, includes a brass 1/4"-20 thread; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it. Dimensions: Overall Length: 5.625"Socket-To-Socket Length: 4.5" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: C SizeNormalized SKU: RAM201UBLUPC Code: 793442913365
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Double Socket Arm with Locking Knob for 1.5" Ball #RAM-201LU
$62.49
$70.06
Ram Mounts RAM-201LU Mounting HardwareRAM Double Socket Arm with Locking Knob for 1.5" Ball BasesThe RAM-201LU, standard double socket arm with locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The locking knob, includes a brass 1/4"-20 thread; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it. Dimensions: Overall Length: 5.625"Socket-To-Socket Length: 4.5" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: C SizeNormalized SKU: RAM201LUUPC Code: 793442909498
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM 16.75" Long Ext Pole with 1" Diameter Ball #RAP-BB-230-18U
$27.26
$32.54
Ram Mounts RAP-BB-230-18U Mounting HardwareRAM 16.75" Long Extension Pole with (2 qty) 1" Diameter Ball EndsThe RAP-BB-230-18U consists of a LONG extension pole with 2 1" diameter ball ends. The ball ends are compatible with all 1" ball double socket arms. Dimensions:Pole Length (Ball End to Ball End): 16.75" Features:1. Extension poles are buoyant, will float if dropped in the water2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments6. Lifetime warranty7. Made in USAMaterial:High Strength CompositeBall Size: 1" Rubber Ball "B" Size Note:The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: Kayak MountsNormalized SKU: RAPBB23018UUPC Code: 793442940439
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM 14" Long Ext Pole with Double Socket Arm #RAP-BB-230-14-201U
$30.16
$36.00
Ram Mounts RAP-BB-230-14-201U Mounting HardwareRAM 14" Long Extension Pole with 2 1" Diameter Ball Ends, and Double Socket ArmThe RAP-BB-230-14-201U consists of a SHORT extension pole with (2 qty) 1" diameter ball ends and double socket arm. Dimensions:Overall Length (Arm Socket to Ball End): 14"Pole Length (Ball End to Ball End): 12.75" Features:1. Extension poles are buoyant, will float if dropped in the water2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments6. Lifetime warranty7. Made in USAMaterial:High Strength CompositeBall Size: 1" Rubber Ball "B" Size Note:The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: Kayak MountsNormalized SKU: RAPBB23014201UUPC Code: 793442940408
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM 12.75" Long Extension Pole with 2 1" Balls #RAP-BB-230-14U
$19.25
$22.98
Ram Mounts RAP-BB-230-14U Mounting HardwareRAM 12.75" Long Extension Pole with 2 1" Diameter Ball EndsThe RAP-BB-230-14U consists of a SHORT extension pole with (2 qty) 1" diameter ball ends. The ball ends are compatible with all 1" ball double socket arms. Dimensions:Pole Length (Ball End to Ball End): 12.75" Features:1. Extension poles are buoyant, will float if dropped in the water2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments6. Lifetime warranty7. Made in USAMaterial:High Strength CompositeBall Size: 1" Rubber Ball "B" Size Note:The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: Kayak MountsNormalized SKU: RAPBB23014UUPC Code: 793442940415
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Tube Jr Fishing Rod Holder with 6" Post Spline #RAP-390U
$20.49
$23.51
Ram Mounts RAP-390U Mounting HardwareRAM Tube Jr. Fishing Rod Holder with Standard 6" Length Post SplineBefore you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Features:1. Quick release and installation2. High strength materials ensure product longevity3. Compatible with all RAM post spline bases4. Compatible with spinning reels and level wind reels5. Position spinning reel to the side or under RAM Tube Jr.6. Compatible with left-handed and right-handed reels7. Lifetime warranty Post Spline Length: 6" Material:High Strength CompositeNote:The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: Fishing Rod HoldersNormalized SKU: RAP390UUPC Code: 793442940552
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Rail Base with SS U-Bolt with 1.5" Ball #RAM-231U
$24.44
$29.17
Ram Mounts RAM-231U Mounting HardwareRAM Rail Base with "Rust-Proof" Stainless Steel U-Bolt & 1.5" Ball for Rails from 0.5" to 1" in DiameterThe RAM motorcycle handlebar base contains a 1.5" rubber ball designed to sit at right angles to the mounting rail. The "Rust-Proof" stainless steel u-bolt accommodates rails in diameter from 0.5" to 1" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".U-Bolt Dimensions:Accommodates rails from 0.5" to 1" in diameter.Material:
Powder Coated Marine Grade Aluminum Ball Size:
1.5" Rubber Ball Size Note:
The "U" in the part number reflects product packaged in poly bag.
RAM Mount Type: C SizeNormalized SKU: RAM231UUPC Code: 793442002311
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Double Socket Long Arm 2.5" Bases 1.5" Ball #RAM-101U-D
$82.00
$101.79
Ram Mounts RAM-101U-D Mounting HardwareRAM 1.5" Diameter Ball Mount with Long Double Socket Arm & 2 2.5" Round Bases w/AMPs Hole PatternThe RAM-101U-D consists of a long double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your device.Material: Powder Coated Marine Grade Aluminum Ball Size:1.5" Rubber Ball SizeNote: The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: Surface MountSpecifications:Component 1 = NONE Component 2 = NONE Component 3 = NONE Component 4 = NONE Component 5 = NONE Component 6 = NONENormalized SKU: RAM101UDUPC Code: 793442010132
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Sportlight Base with 3/8-16 Post #RAM-236U
$13.16
$15.71
Ram Mounts RAM-236U Mounting HardwareRAM Spotlight Base w/3/8"-16 PostThe RAM-236U consists of a 1.5" diameter rubber ball, connected to a 3/8"-16 thread. Material: Powder Coated Marine Grade Aluminum Ball Size:1.5" Rubber Ball Size Note:The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: C SizeNormalized SKU: RAM236UUPC Code: 793442002366
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM 3.625" Square Base with Double U-Bolt Mount #RAM-334-1U
$80.84
$100.35
Ram Mounts RAM-334-1U Mounting HardwareRAM 1.5" Rail Mount with Double U-Bolt Base & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-334-1U consists of a double socket arm, 3.625" square base with the VESA hole pattern and stainless steel double u-bolt base that will fit pipes from 0.75" to 1" in diameter. The VESA base contains a 75mm X 75mm hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. U-Bolt Dimensions:Accommodates rails from 0.75" to 1" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size:1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: Rail & Handle Bar MountsNormalized SKU: RAM3341UUPC Code: 793442905100
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM 3.625" Square Plate with Vesa Hole Pattern 1.5" Ball #RAM-246U
$29.68
$35.43
Ram Mounts RAM-246U Mounting HardwareRAM 3.625" Square Plate with VESA (4 X 75mm) (4 X 100mm) Hole Patterns & 1.5" Diameter BallThis RAM-246U consists of a 1.5" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner. Material: Powder Coated Marine Grade Aluminum Ball Size:1.5" Rubber Ball Size Note:The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: C SizeNormalized SKU: RAM246UUPC Code: 793442002465
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM 1" x 2" Rectangle Base with 1.5" Ball #RAM-202U-12
$17.64
$21.05
Ram Mounts RAM-202U-12 Mounting HardwareRAM 1" x 2" Rectangle Base with 1.5" BallThe RAM-202U-12 consists of a 1.5" diameter rubber ball connected at right angles to a 1" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material:Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: C SizeNormalized SKU: RAM202U12UPC Code: RAM-202U-12
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM 1.5" Ball Mount Short Arm 2-2.5" Round Base #RAM-101U-B
$58.89
$70.67
Ram Mounts RAM-101U-B Mounting HardwareRAM 1.5" Diameter Ball Mount with Short Double Socket Arm & 2/2.5" Round Bases w/AMPs Hole PatternThe RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your device.Material: Powder Coated Marine Grade Aluminum Ball Size:1.5" Rubber Ball SizeNote: The "U" in the part number reflects product packaged in poly bag. RAM Mount Type: Surface MountSpecifications:Component 1 = NONE Component 2 = NONE Component 3 = NONE Component 4 = NONE Component 5 = NONE Component 6 = NONENormalized SKU: RAM101UBUPC Code: 793442010125
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Raymarine
Raymarine Flush Mount Kit for Dragonfly 5.7" Display #A80223
$24.46
$29.19
Raymarine A80223 Mounting HardwareDragonfly Flush Mount KitFlush Mount Kit specifically for Raymarine Dragonfly 5.7" displays. Normalized SKU: A80223UPC Code: 723193769355
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Garmin
Garmin Gold Cylinder Bracket #120-1010-01
$161.11
$204.62
Garmin 120-1010-01 Mounting HardwareTR-1 Cylinder Bracket Kit f/Mercury 9.9 1999-2004 & Mercury 15 1999-2009Garmin's Cylinder Bracket Kit for TR-1.Specifically For:
Mercury 9.9 1999-2004
Mercury 15 1999-2009
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: 120101001UPC Code: 753759973391
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.