00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Raymarine
Raymarine Mast Mount #M92722
$476.09
$594.21
Raymarine M92722 Mounting HardwareMast Mounting Platform for 2kw Radome ScannerWhite, powdercoated aluminum mast mounting bracket, pre-drilled to attach the Pathfinder 2 kW radome scanner. Includes mounting hardware and instructions.RAYMARINE M92722 MAST MOUNT Normalized SKU: M92722UPC Code: 023193927220
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Shakespeare
Shakespeare Chrome 4-Way Mount #407
$64.83
$77.80
Download LiteratureShakespeare 407 Mounting HardwareShakespeare Style 407SWIVEL MOUNT-HEAVY DUTYCHROME-PLATED BRASSVersatile four-way action fits almost any mounting location and permits antenna laydown in desired direction. For deck or side mounting when used with a stand-off bracket. Standard 1"-14 thread.Bolt holes: 5/16" dia., 3" x 1-1/4" on center Specifications:Mounting Style = NONE Construction = NONESHAKESPEARE 407 CHROME 4-WY MT Normalized SKU: 407UPC Code: 719441110031Shakespeare 407 Literature Download Quick Reference Guide
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanstrut Powertower 6" Alum for 2kw/4kw Raymarine/Garmin #APT-F-150-01
$430.18
$536.91
Scanstrut APT-F-150-01 Mounting HardwarePowerTower® 6" Aluminum 2kW/4kW Raymarine, Garmin & Navico BR24/3G/4G - Forward LeaningFor Radomes, Open Array & Small Satcom/TV AntennaExpertly designed to install your antenna on the cabin roof, flybridge or radar arch of your powerboat, providing a clear view of the horizon for maximum antenna performance.Features:Choice of Heights: 150mm (6”) for low level clearance of smaller obstacles or 250mm (10”) for greater clearance and increased radar horizon.Ease of Install: Pre-drilled mounting holes, the antenna fastens to PowerTower top plate using its own mounting bolts.Additional Features:
Internally Mounted Scanstrut DS30 cable seal
Marine Sealant not required
No need to cut cable of remove plugs
Inserts included to fit cables from all major radomes
Specifications:Construction = Aluminum Lean (FWD/Aft) = FWD Light/GPS Bracket = NONENormalized SKU: APTF15001UPC Code: 5060114796485
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM No Drill Vehicle System fits 2019 RAM 1500-5000 #RAM-VB-186ST1-SW1
$325.49
$346.54
Ram Mounts RAM-VB-186ST1-SW1 Mounting HardwareRAM® No-Drill™ Laptop Mount for 2019 RAM 1500-5000This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2019 Dodge RAM 1500-5500 using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation.The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions.Specifications:
Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements: No - attaches to seat studs
Seat Configuration: Bucket
Material: High Strength Composite and Powder Coated Steel
Notes: If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit. Laptop base will fit under seat air duct in vehicles that have that option.
Specifications:Component 1 = NONE Component 2 = NONE Component 3 = NONE Component 4 = NONE Component 5 = NONE Component 6 = NONENormalized SKU: RAMVB186ST1SW1
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Double U-Bolt Base for 1.25-1.5" Rail #RAM-235-1U
$29.57
$35.30
Watch VideoRam Mounts RAM-235-1U Mounting HardwareRAM® Double U-Bolt Ball Base for 1.25" - 1.5" RailsThe RAM-235-1U consists of a double u-bolt base with 1.5" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate rails from 1.25" to 1.5" in diameter. Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag. This mount includes zinc coated u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt.
Weight: 0.54 lbs.
Normalized SKU: RAM2351UUPC Code: 793442927645Ram Mounts RAM-235-1U Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanstrut Rokk Mini for Phone with Self Adhesive Base #RLS-509-404
$85.83
$106.54
Watch VideoScanstrut RLS-509-404 Mounting HardwareROKK Mini Mount Kit for Phone with Self Adhesive BaseThe ROKK mini universal phone and tablet mounting kits are the toughest mounting system for your device.Kit Includes:
Universal Phone Clamp or Universal Tablet Clamp
Adjustable Body
Suction Cup, Screw Down, Zip Tie, Self Adhesive or Rail Mount
The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click. Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit and extend possibilities of your ROKK mini starter kit. Specifications:Cut/Uncut = NONE Mounting Style = NONE Usable Face = NONENormalized SKU: RLS509404UPC Code: 5060114795778Scanstrut RLS-509-404 Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanstrut Rokk Mini for Tablet with Rail Mount #RLS-508-402
$138.66
$172.13
Watch VideoScanstrut RLS-508-402 Mounting HardwareROKK Mini Mount Kit for Tablet with Rail MountThe ROKK mini universal phone mounting kit is the toughest mounting system for your device. The ROKK mini universal phone and tablet mounting kits are the toughest mounting system for your device.Kit Includes:
Universal Phone Clamp or Universal Tablet Clamp
Adjustable Body
Suction Cup, Screw Down, Zip Tie, Self Adhesive or Rail Mount
The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click. Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit and extend possibilities of your ROKK mini starter kit. Specifications:Cut/Uncut = NONE Mounting Style = NONE Usable Face = NONENormalized SKU: RLS508402UPC Code: 5060114795730Scanstrut RLS-508-402 Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Mount Tough-Ball with 1/4"-20 x .50" Stud #RAP-B-379U-252050
$10.85
$12.95
Ram Mounts RAP-B-379U-252050 Mounting HardwareTough-Ball™ with 1/4"-20 x .50" Threaded Stud The RAP-B-379U-252050 consists of a 1" diameter rubber ball, connected to a 1/4"-20 X .50" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera. U.S. Standard Thread Diameter and Pitch Option:1/4"-20 X .50"Material:High Strength Composite & SteelBall Size:B Size 1" Rubber BallNote:The "U" in the part number reflects product packaged in poly bag. Normalized SKU: RAPB379U252050UPC Code: 793442938153
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Mount X-Grip Phone Mount with 9mm Angled Bolt Adapter #RAP-B-272-A-UN7U
$60.29
$72.34
Ram Mounts RAP-B-272-A-UN7U Mounting HardwareX-Grip® Phone Mount with 9mm Angled Bolt Head Adapter The RAP-B-272-A-UN7U consists of an angled base with 9mm hole, short composite double socket arm and universal spring loaded RAM® X-Grip® cradle for cell phones. The angled base is often used on motorcycles, attaching to the mirror frame, the main brand of bike for this part is BMW. The included RAM® X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded RAM® X-Grip®cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM® X-Grip® is the cell phone cradle evolved. The RAM® X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions:
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Material:High Strength Composite, Marine Grade Stainless Steel Components, and Powder Coated Marine Grade AluminumBall Size:B Size 1" Rubber BallNote:Part number reflects product packaged in clear clam shell for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Normalized SKU: RAPB272AUN7U
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Mount Composite Ball Adapter with Amps Plate #RAP-B-347U
$7.97
$9.51
Ram Mounts RAP-B-347U Mounting HardwareComposite Ball Adapter with AMPS Plate The RAP-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal 1.5 x 1.188 (hole spacing) AMPS hole pattern. Material:Powder Coated Marine Grade AluminumBall Size:B Size 1" Rubber BallNote:The "U" in the part number reflects product packaged in poly bag. Normalized SKU: RAPB347UUPC Code: 793442916786
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Mount Composite Drill-Down Double Ball Mount #RAP-B-141U-A
$22.09
$26.36
Ram Mounts RAP-B-141U-A Mounting HardwareComposite Drill-Down Double Ball Mount with Rectangle AMPS Plates This composite drill-down double ball mount features two AMPS hole pattern bases with 1" diameter balls. Each base has four pre-drilled holes at each corner with 1.5" x 1.188" hole spacing. These bases attach directly to the included short double socket arm. Take advantage of the RAM® double ball and socket system for near-infinite adjustability to achieve a perfect viewing angle for your mounted device. Dimensions:
Overall Height: 4.1"
Material: High-Strength Composite
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Specifications:Component 6 = NONE Component 5 = NONE Component 3 = NONE Component 2 = NONE Component 1 = NONE Component 4 = NONENormalized SKU: RAPB141UA
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Ram-A-Can II with Double Ball Mount #RAP-299-3-B-102U
$55.37
$66.44
Ram Mounts RAP-299-3-B-102U Mounting HardwareRAM-A-CAN™ II Universal Cup Holder Base with Double Ball MountThe RAP-299-3-B-102U consists of a double socket arm, two diamond bases and RAM-A-CAN™ II cup holder base. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. The RAM-A-CAN™ II cup holder base serves as a mounting point for the diamond base.Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5".Specifications:
Material: High Strength Composite
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag
Specifications:Component 1 = RAP-B-102U Component 2 = RAP-299-3U Component 3 = NONE Component 4 = NONE Component 5 = NONE Component 6 = NONENormalized SKU: RAP2993B102U
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lowrance
Lowrance ROKK Mini HOOK2 Kayak Mount #000-14969-001
$76.98
$95.56
Watch VideoLowrance 000-14969-001 Mounting HardwareROKK Mini Lowrance HOOK2 Kayak MountThe ROKK mini Lowrance HOOK² kayak mount was designed alongside Lowrance’s product design team, ensuring the perfect fit for the HOOK2 4x, 4x GPS, 5x, 5 models, the world’s easiest fish finder range. The 360° rugged marine grade mount enhances your fishing experience; you can mount, adjust and lock your HOOK² to the optimum position allowing you to spend more time fishing and less time re-adjusting. When you're done fishing for the day, simply release the HOOK² and ROKK mini mount from its base with the quick release button to take home with your catch.The HOOK² clamp is compatible with the ROKK mini body and all 6 ROKK mini bases; suction cup, screw down, self-adhesive, rail, zip tie and kayak track and is the pro’s choice No.1 mounting choice.Kit Includes:
Quick Release Adapter
Quick Release Adjustable Adapter
Screw Down Base
Specifications:Cut/Uncut = NONE Mounting Style = NONE Usable Face = NONENormalized SKU: 00014969001Lowrance 000-14969-001 Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanpod Deck Pod Uncut for 10" to 12" Displays #SPD-13-W
$628.43
$784.35
Scanstrut SPD-13-W Mounting HardwareScanpod Deck Pod Uncut for 10" to 12" DisplaysSolve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.For Displays and Standard Instruments:
Fits 10" to 12" Displays
Usable face 14.7H x 9.7W
Accomodates 3/4 Standard instruments (e.g. ST60)
Features:SWIVEL & TILT BASEOne handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position.BEST VIEWING ANGLEAn adjustable ball joint allows range of movement and multiple mounting angles.ADDED STRENGTHInner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration.OVERHEAD MOUNTINGDeck Pod models can be overhead mounted. Refer to part number guide for compatibility.HASSLE FREE INSTALL & SERVICEFixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.INCREASED PROTECTIONPod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time.SUPPLIED UNCUTAs standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available. Specifications:Usable Face = NONE Mounting Style = NONE Cut/Uncut = NONENormalized SKU: SPD13WUPC Code: 5060114797284
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM 8" Upper Pole with Double Swing Arm and Vesa #RAM-VP-SW1-8-2461
$148.49
$166.91
Watch VideoRam Mounts RAM-VP-SW1-8-2461 Mounting Hardware8" Upper Pole with Double Swing Arms & 75 x 75mm VESA PlateThe RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole pattern. The Tele-Pole™can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge. Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: Part number reflects product packaged in clear clam shell for store shelf display
Specifications:Component 1 = RAM-2461U Component 2 = RAM-VP-TTM8U Component 3 = RAM-VB-110-1NBUNormalized SKU: RAMVPSW182461Ram Mounts RAM-VP-SW1-8-2461 Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Double Ball Mount with 1/4"-20 Male Thread #RAM-B-101AU
$41.19
$49.43
Watch VideoRam Mounts RAM-B-101AU Mounting HardwareDouble Ball Mount with 1/4"-20 Male ThreadThe RAM-B-101AU consists of a double socket arm, one 2.5" diameter round base with the universal AMPS hole pattern and universal camera/camcorder base. The universal camera/camcorder base consists of a 1" diameter rubber ball connected to a 2.5" diameter round base with 1/4-20 camera thread. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles. Specifications:
Dimensions: Overall Height: 5"
Material: Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.51 lbs.
Specifications:Component 1 = RAM-B-202AU Component 2 = RAM-B-202U Component 3 = RAM-B-201U Component 4 = NONE Component 5 = NONE Component 6 = NONENormalized SKU: RAMB101AURam Mounts RAM-B-101AU Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanstrut Dual Powertower Strut Compact #DPT-R-COMP
$734.40
$889.31
Scanstrut DPT-R-COMP Mounting HardwareModular Dual PowerTower Strut - Compact Domes OnlyThe Modular Dual PowerTower has been designed to allow your open array, radar, Satcom & camera to be mounted together in one single space-saving modular installation.Features:
Dual Power Tower strut (Radome) (compact)
Material: 6082 Aluminum Extrusion
Coating: Polyester Powder
Finish: Gloss White
Application: Marine
Specifications:Light/GPS Bracket = NONE Lean (FWD/Aft) = NONE Construction = NONENormalized SKU: DPTRCOMPUPC Code: 5060114796331
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanstrut Satcom Plate 2 Designed for Satdom #DPT-S-PLATE-02
$141.32
$175.43
Scanstrut DPT-S-PLATE-02 Mounting HardwareSatcom Plate 2 Designed for Satcoms Up to 45cm (17")The Modular Dual PowerTower has been designed to allow your open array, radar, Satcom & camera to be mounted together in one single space-saving modular installation.Features:
Designed for Satcoms Up to 45cm (17")
Satcom Plate 2
Specifications:Array Size (Inches) = NONE Construction = NONE Hor/Vert Beam Width = NONE Lean (FWD/Aft) = NONE Light/GPS Bracket = NONE Power - Output (Kilowatts) = NONE Range - Max (Miles) = NONENormalized SKU: DPTSPLATE02UPC Code: 5060114796409
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Scanstrut
Scanstrut Central Lightbar up to 45 cm Dome #DPT-LB-01
$288.99
$367.04
Scanstrut DPT-LB-01 Mounting HardwareCentral Lightbar for Up to 45cm DomesThe Modular Dual PowerTower has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation. Features:Central Lightbar for use with up to 45cm DomesCompatible Devices:
Hella NaviLED Pro
Hella 2984 Series
Aquasignal Series 40
Aquasignal Series 25
Perko 0200 Tri-Color/ White All Round Navigation Light
Perko 0455 and 0406
Lopolight
Specifications:Construction = NONE Lean (FWD/Aft) = NONE Light/GPS Bracket = NONENormalized SKU: DPTLB01UPC Code: 5060114796423
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
RAM Mounts
RAM Double Socket Arm Dual Extension & Ball Adapter #RAM-B-201-201U
$52.32
$62.78
Watch VideoRam Mounts RAM-B-201-201U Mounting HardwareDouble Socket Arm with Dual Extension & Ball AdapterThe RAM-B-201U, Medium length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm, keeps the socket open, allowing you to incert the ball in to the socket connection. RAM's socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.Featuring:
Dimensions: Overall Length: 3.69"
Socket-To-Socket Length: 3"
Material: Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.31 lbs.
Specifications:Component 1 = ram-b-201u-wd1 Component 2 = ram-b-2-1 Component 3 = NONE Component 4 = NONE Component 5 = NONE Component 6 = NONENormalized SKU: RAMB201201URam Mounts RAM-B-201-201U Video
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.