NavPod GP1800-14 Mounting HardwareSailPod Pre-Cut for Garmin GPSMAP 923/923xsv/943/943xsv for 9.5″ Wide GuardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your fingertips… “Where you need it when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: GP180014

NavPod GP1500-51 Mounting HardwareSystemPod Pre-Cut for Garmin GPSMAP® 723 & 743xsv On Right & GHC™ 50 On Left for 9.5" Wide Angle GuardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform the pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality - We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: GP150051

NavPod GP1500-43 Mounting HardwareSystemPod Pre-Cut for Garmin GPSMAP® 723/723xsv/743/743xsv On Right & Extra Space On Left for 9.5" Wide GuardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it, when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.This SystemPod for Power can be dash mounted using the SK11 Stanchion Kit, or overhead mounted using the SK125 Stanchion Kit.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform the pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to Quality: We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: GP150043

NavPod GP1170-25 Mounting HardwareSystemPod Pre-Cut for Garmin GPSMAP® 1223, 1223xsv, 1243 & 1243xsv on Right & 2 Instruments (3.6″ holes) on Left for 9.5″ Wide GuardGP1170-25 for Sail: SystemPod Pre-Cut for Garmin GPSMAP 1223/1223xsv/1243/1243xsv on the right AND two instruments (3.6″ holes) on the left for 9.5″ wide guard SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to qualityWe stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: GP117025

NavPod GP1080-35 Mounting HardwareSystemPod Pre-Cut for Garmin GPSMAP® 923, 923xsv, 943 & 943xsv on Right & 2 Instruments (3.6″ holes) for 9.5″ Wide GuardGP1080-35 for Sail: SystemPod Pre-Cut for Garmin GPSMAP 923/923xsv/943/943xsv *on the right AND* two instruments (3.6″ holes) for 9.5″ wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality Normalized SKU: GP108035

NavPod GP1040-52 Mounting HardwareSystemPod Pre-Cut for Garmin GPSMAP® 923, 923xsv, 943 & 943xsv on Right & 1 Additional Instrument (3.6″ hole) on Left for 9.5″ Wide Guard GP1040-52 for Sail: SystemPod Pre-Cut for Garmin GPSMAP 923/923xsv/943/943xsv on the right AND 1 additional instrument (3.6″ hole) on the left for 9.5″ wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to qualityWe stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: GP104052

NavPod GP1040-43 Mounting HardwareSystemPod Pre-Cut for Garmin ECHOMAP Plus/UHD 92sv/93sv/94sv/95sv – Plus One Additional Instrument for 9.5″ Wide GuardSystemPods are for mounting a radar, chartplotter, and instruments together at the helm. Navigation at your fingertips… "Where you need it, when you need it." SystemPods are the smart solution for mounting your radar, chartplotter, and instruments together at the helm, where you can easily operate and clearly see the fine details of the screen.Features: This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit Pre-cut for MFD on the right and one additional instrument (3.6 in. hole) on the left Specifications: Overall Height (inch): 9.5" Overall Width (inch): 20.25" Overall Depth (inch): 6" Usable Face Height (inch): 7.375" Usable Face Width (inch): 17.5" Usable Face Depth (inch): 5" Max Cutout Height (inch): 7" Max Cutout Width (inch): 17" Structural RigidityThe Gen3 enhancements now include a thicker gauge of acrylic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof SealAll SystemPods are manufactured with a double gasket system, providing an excellent watertight seal. This seal provides the best protection for your marine electronics. SystemPods are made to withstand the harshest, wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless SteelNavPod uses all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on the Traditional Series NavPod. For Gen3 NavPods, they provide nickel-chrome-plated stainless steel tamperproof screws for security combined with a little style! Normalized SKU: GP104043

Download LiteratureSeaview SRM200W Mounting HardwareGen 3 Standard Starlink Antenna MountThe Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance. The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, marine or vehicle mounting necessitates additional support. Opting for the Seaview SRM200W Mount is a superior choice, offering a reliable and adaptable mounting solution. You have the option to utilize through-bolts for a permanent fixture through machined holes in the mount's base or pair it with the Seaview 8° Wedge base for a highly versatile installation.*The SRM200W can be mounted directly or it can be mounted to the Starlink 8° Wedge Base (SVSLWB). Normalized SKU: SRM200WUPC Code: 850047035585Seaview SRM200W Literature Download Quick Reference Guide Owners Manual

Download LiteratureScotty 0160 Mounting Hardware160 1.5" Ball Mounting System for 7-9" ScreensComponents: 161 1.5" Ball System Arms 165 1.5″ Ball System Top Plate 166 1.5″ Ball System Base 161 1.5" Ball System ArmsFeatures: Engineering-grade nylon and stainless steel construction Compatible with all 1.5″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) 165 1.5″ Ball System Top PlateFeatures: The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners(sold separately) 166 1.5″ Ball System BaseFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 1.5″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) Normalized SKU: 0160Scotty 0160 Literature Download Quick Reference Guide

Ram Mounts RAM-HOL-AP38U Mounting HardwareForm-Fit Holder for Apple iPhone 13, 13 Pro, 14 & 14 ProThis form-fit cradle was designed specifically for the Apple iPhone 13, 13 Pro, 14, and 14 Pro. Designed for phones without cases, this cradle features one-handed docking and removal of your iPhone, and all buttons, cameras, ports, and speakers remain exposed and accessible.The 2-hole AMPS pattern on the back of the cradle and included hardware allow for the attachment of a RAM® diamond ball base, compatible with a wide range of additional RAM® components.Features: Form-fit cradle for Apple iPhone 13, 13 Pro, 14, & 14 Pro provides a perfect fit for your device without a case Compatible with B and C-size RAM® diamond ball bases for attaching a double socket arm, ball, and socket technology allows for near-infinite adjustability Made of high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included (inch): (2) #8-32 x 1/2" Machine Screws, (2) #8-32 x 5/8" Machine Screws, (2) #8-32 x 3/4" Machine Screws, and (2) #8-32 Nylock Nuts Hole Pattern: 2-Hole AMPS: 1.912 in. Materials: High-strength composite Weight: 0.15 lb. Compatible Devices:Apple: iPhone 13, iPhone 13 Pro, iPhone 14, and iPhone 14 Pro Normalized SKU: RAMHOLAP38UUPC Code: 793442810978