Garmin 010-12833-15 Mounting HardwareGarmin Remote Cradle #010-12833-15Normalized SKU: 0101283315UPC Code: 753759223298

Download LiteratureNavPod SP3000 Mounting HardwareStarPod 3 System for Starlink Gen3 Standard Dish (23.04 x 15.07″ Dish Size)*Starlink Dish NOT INCLUDEDThe StarPod 3 System is a waterproof, secure, attractive mounting solution for your Starlink Gen3 Standard antenna. The housing features a built-in 10-degree angle and full swivel adjustability so that the dish can be manually adjusted for an optimized view of Starlink satellites in the sky. The 10-degree angle also prevents water from pooling on top of the housing, which can cause signal interference.Note: Assembly of this product requires the use of a deck fill wrench (Groco model SW-2531 or equivalent product). This tool is NOT included with the StarPod.What are the benefits of mounting a Starlink dish in a StarPod?StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Our testing has proven that there is no degradation of the signal while inside the thermoformed acrylic-capped ABS housing.Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other Marine Electronics for over 25 years.Features: Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform the pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for matching to the NavPod wrench for better holding ability when tightening. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods, including the StarPod. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: SP3000NavPod SP3000 Literature Download Quick Reference Guide

NavPod PP5920-01-C Mounting HardwarePowerPod Pre-Cut for Raymarine AXIOM Pro 16 - Carbon SeriesPowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods: Protection, Convenience, Security. Normalized SKU: PP592001C

Raymarine A80554 Mounting HardwareRaymarine Surface Mount KitFor Element 9"Model: A80554Normalized SKU: A80554UPC Code: 723193824641

Download LiteratureNavico 000-13760-001 Mounting HardwareMounting Bracket for NSS16 evo3 & Zeus3 16Metal Mounting Bracket for Simrad NSS evo3 and evo3S displays. Includes (2) knobs. Normalized SKU: 00013760001UPC Code: 9420024161067Navico 000-13760-001 Literature Download Quick Reference Guide

Marinco Recreational Group CW125IT4 Mounting Hardware100 Amp 125/250V 3-Pole, 4-Wire Cordset - No Neutral Wire- One-Ended Male Only Power Supply - Blunt Cut - 125'All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords. Features: For use with 100 amp 125V/250V shore power systems  High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)  Ergonomic non-slip TPE coated gripping surfaces  IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.  Internal frame terminals provide high clamping force for safe and secure contact  Options for use with on-board isolation transformers, male plug only power supply, and extension purposes  UL and ABYC approved components Specifications: Length: 125' Neutral Wire: No Female End: No, Blunt Cut Application: Cable Winch with Isolation Transformer Color: Yellow WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: CW125IT4UPC Code: 093344065521

Download Literature Watch VideoSeaview LTBSBLK Mounting Hardware1-1/4" Black Light Bar for 20" or Smaller Satdomes - Folds Over 90° - Must Pick LTB TopSeaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars are also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance.Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars, and cameras/searchlights.Extra Height ClearanceOn select Seaview light bar models, some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts Normalized SKU: LTBSBLKUPC Code: 727908835403Seaview LTBSBLK Literature Download Quick Reference Guide Owners ManualSeaview LTBSBLK Video

Download LiteratureRam Mounts RAM-B-202-AP36U Mounting HardwareRAM® EZ-Roll'r™ Cradle with Ball for Apple iPad mini (A17 Pro) & mini 6The RAM® EZ-Roll’r™ cradle for iPad mini (A17 Pro) & mini 6 with 1" ball secures your device in a form-fit holder while keeping the entire screen visible. The cradle includes a patent-pending roller design for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to complement your iPad and become the most useful accessory in your vehicle.Features: RAM® EZ-Roll'r™ cradle designed specifically for a caseless Apple iPad mini (A17 Pro) & mini 6 Includes B-size ball adapter, compatible with any RAM® B-size double socket arm; ball and socket technology allows for near-infinite adjustability Made of high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum, high-strength composite Packaging Type: Poly Bag Weight: 0.45 lbs Normalized SKU: RAMB202AP36URam Mounts RAM-B-202-AP36U Literature Download Quick Reference Guide