Bob's Machine Shop 100-504100-NOPC-NOSPN Motor PlatesBob's Machine Shop 4" HD Versa Jack Plate #100-504100-NOPC-NOSPNNormalized SKU: 100504100NOPCNOSPN

Bob's 100-610005P-PCBW-NOSPN-NG Motor Plates Bob's Machine Shop 10" Extreme jack plate in white finish, model 100-610005P-PCBW-NOSPN-NG, engineered for outboard motor trim and tilt adjustment. Precision-machined construction enables optimal propeller depth control and hull attitude tuning for improved performance, fuel efficiency, and handling across varying water conditions. No-spin design ensures reliable operation in demanding marine applications. Extreme Gen 3 series support motors up to a 15″ mounting width.  If using a wider motor, such as the Yamaha XTO, a set of 1″ spacers will be required for clearance. Bob’s Machine Shop has re-engineered its world-famous jack plate for new 550+hp engines, including V10’s. The Extreme Gen 3 Action has the all-in-one style pump, built into the jack plate, so no hoses or pump to mount inside the boat.  This makes rigging the boat extremely easy! The Extreme Gen 3 Action series jack plates are available in 4, 6, 8, 10 & 12″  setbacks to suit every application. Jack plates are no longer just for fishing boats; offshore boaters will enjoy the extra speed and increased fuel economy from BMS’s new line. Jack plates are used to improve an outboard boat's speed, hole shot, fuel efficiency, and to help the boater navigate in shallow waters.  Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty NOTE: Show in Silver, this one is Gloss White. Normalized SKU: 100610005PPCBWNOSPNNGUPC Code: 818377015851

Bob's 100-606005P-PCBW-NOSPN-NG Motor Plates Bob's Machine Shop 6" Extreme jack plate finished in white, model 100-606005P-PCBW-NOSPN-NG, delivers precision motor positioning for outboard engines. The no-spin mechanism maintains consistent trim angles while allowing fine adjustments to propeller depth, enhancing boat handling, fuel economy, and acceleration across variable sea states. Built for reliability in high-performance marine setups. Extreme Gen 3 series support motors up to a 15″ mounting width.  If using a wider motor, such as the Yamaha XTO, a set of 1″ spacers will be required for clearance. Bob’s Machine Shop has re-engineered its world-famous jack plate for new 550+hp engines, including V10’s. The Extreme Gen 3 Action has the all-in-one style pump, built into the jack plate so no hoses or pump to mount inside the boat.  This makes rigging the boat extremely easy! The Extreme Gen 3 Action series jack plates are available in 4, 6, 8, 10 & 12″  setbacks to suit every application. Jack plates are no longer just for fishing boats; offshore boaters will enjoy the extra speed and increased fuel economy from BMS’s new line. Jack plates are used to improve an outboard boat's speed, hole shot, fuel efficiency, and the boater's navigation in shallow waters.  Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty NOTE: Shown in Silver, this one is White. Normalized SKU: 100606005PPCBWNOSPNNGUPC Code: 818377015844

Bob's 100-111000P-PCBW-NOSPN-NG Motor Plates Bob’s Machine Shop’s new hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market.  The first Bob’s Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging. The new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed and strength with heavy outboards.  All of Bob’s patented features from our standard series, automotive-style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™. Offered in 4″, 6″, 8″, 10″, 12″, and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback. Action series support motors up to a 14.5″ mounting width.  If wider, we recommend our Extreme Gen 3 series jack plates.  Pump inside the jack plate Factory-installed holeshot plate on 8+” Setback models Large, powerful motor that can lift heavy outboards under full power 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Can be converted to have a pump inside the boat if the owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Made in the USA, in our own factory in Tampa, Florida Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre-drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch  Limited Lifetime Structure Warranty against manufacturing defects  3 Year Action Pump Warranty NOTE: Shown in Silver, this one is White. Normalized SKU: 100111000PPCBWNOSPNNGUPC Code: 818377015875

Bob's 100-106010P-PCBW-NOSPN-NG Motor Plates Bob’s Machine Shop’s new hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market.  The first Bob’s Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging. The new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed and strength with heavy outboards.  All of Bob’s patented features from our standard series, automotive-style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™. Offered in 4″, 6″, 8″, 10″, 12″, and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback. Action series support motors up to a 14.5″ mounting width.  If wider, we recommend our Extreme Gen 3 series jack plates.  Pump inside the jack plate Large, powerful motor that can lift heavy outboards under full power 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Can be converted to have the pump inside the boat if the owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Made in the USA, in our own factory in Tampa, Florida Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre-drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty NOTE: Shown in Silver, this one is White. Normalized SKU: 100106010PPCBWNOSPNNGUPC Code: 818377015868

Bob's Machine Shop 110-200000P-PCGBLK Motor Plates Bob’s Machine Shop’s transom backing plates A machined product, made out of cold-rolled plate.  Unlike competitors that use weak casting, our backing plates are made to last Includes both an upper and lower plate for all Standard BIA boat pattern motors This is a good addition with the installation of a jack plate to help spread the load of the plate/engine across more of the transom than just the bolts/washers, and it looks great Normalized SKU: 110200000PPCGBLK

T-H Marine 7050 Motor Plates Actuator Assembly CMC Jack PlateHydraulic Actuators are completely self-contained with their own fluid reservoir. They incorporate the pump, motor, reservoir, and cylinder all in the same body. This eliminates the need for multiple hydraulic components such as hoses, pumps, and cylinders. An actuator can be utilized in almost any type of environment. Made of 100% non-ferrous materials, they are totally submersible. They contain a no-leak seal and wiper that keeps dirt and water out of the working parts. Fits: CMC Power-Lift hydraulic jack plates (models: 61001, 61002, 65001, 65002, 65201) T-H Marine Hydro-Jacker hydraulic jack plates (models: HYJ-6C-DP, HYJ-10C-DP) CMC Power Tilt & Trim Units (PT-35 & PT-130 models: 13001, 13002, 52100) ATLAS Tilt & Trim Units (models: THT-35C-DP, THT-130C-DP, THT-130CGK-DP) Normalized SKU: 7050UPC Code: 739697070507

Bob's Machine Shop 305-500000 Motor Plates Standard Jack Plate switch – TTC1 – 2 button This Transom Trim Control provides a weatherproof tilt control control system at the stern of the boat to facilitate placing motor support n position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. the switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18″ pigtail wire (3 wires, red/blue/green) Normalized SKU: 305500000UPC Code: 709347208901

Bob's Machine Shop 110-114007 Motor Plates Bolt Kit for jack plate installation For motors with 1/2″ hardware requirements Not for Mini Manual Jack Plate 304SS Contains: 6 x 1/2″ x 7" SS Bolts 6-1/2″ Nylok Nuts 12 x Flat washers 6 x Lock Washers Normalized SKU: 110114007UPC Code: 818377015103

Bob's Machine Shop 110-114008 Motor Plates Bolt Kit for jack plate installation For motors with 1/2″ hardware requirements Not for Mini Manual Jack Plate 304SS Contains: 6 x 1/2″ x 8" SS Bolts 6-1/2″ Nylok Nuts 12 x Flat washers 6 x Lock Washers Normalized SKU: 110114008UPC Code: 818377015110

Bob's Machine Shop 110-114006A Motor Plates Bolt Kit for jack plate installation For motors with 1/2″ hardware requirements Not for Mini Manual Jack Plate 304SS Contains: 6 x 1/2″ x 6.5" SS Bolts 6-1/2″ Nylok Nuts 12 x Flat washers 6 x Lock Washers Normalized SKU: 110114006AUPC Code: 818377015097

Bob's Machine Shop 110-114006 Motor Plates Bolt Kit for jack plate installation For motors with 1/2″ hardware requirements Not for Mini Manual Jack Plate 304SS Contains: 6 x 1/2″ x 6" SS Bolts 6-1/2″ Nylok Nuts 12 x Flat washers 6 x Lock Washers Normalized SKU: 110114006UPC Code: 818377015080

Bob's Machine Shop 110-114005 Motor Plates Bolt Kit for jack plate installation For motors with 1/2″ hardware requirements Not for Mini Manual Jack Plate 304SS Contains: 6 x 1/2″ x 5" SS Bolts 6-1/2″ Nylok Nuts 12 x Flat washers 6 x Lock Washers Normalized SKU: 110114005UPC Code: 818377015066

Bob's Machine Shop 110-114005A Motor Plates Bolt Kit for jack plate installation For motors with 1/2″ hardware requirements Not for Mini Manual Jack Plate 304SS Contains: 6 x 1/2″ x 5.5" SS Bolts 6-1/2″ Nylok Nuts 12 x Flat washers 6 x Lock Washers Normalized SKU: 110114005AUPC Code: 818377015073

Bob's Machine Shop 110-114004 Motor Plates Bolt Kit for jack plate installation For motors with 1/2″ hardware requirements Not for Mini Manual Jack Plate 304SS Contains: 6 x 1/2″ x 4" SS Bolts 6-1/2″ Nylok Nuts 12 x Flat washers 6 x Lock Washers Normalized SKU: 110114004UPC Code: 818377015042