Attwood Marine ST34-110-1 Gas SpringsAttwood INOX Stainless Standard Series. Stainless Steel shell and rod ensure corrosion-resistance and up to 30% lower cost than traditional Stainless springs. All Stainless Standard Series springs come with high-strength, corrosion-proof composite end fittings.Gas Springs: Aftermarket Gas SpringsOutput Force: 110 PoundsExtended: 20.00 InchesProduct Series: Stainless StandardCompressed: 12.00 InchesStroke: 8.00 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: ST-34-110-1Specifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: ST341101UPC Code: 022697341105Search Key: ATT-ST34-Package Type: Bulk - Not packaged

Attwood Marine ST30-40-5 Gas SpringsAttwood INOX Stainless Standard Series. Stainless Steel shell and rod ensure corrosion-resistance and up to 30% lower cost than traditional Stainless springs. All Stainless Standard Series springs come with high-strength, corrosion-proof composite end fittings.Gas Springs: Aftermarket Gas SpringsOutput Force: 40 PoundsExtended: 10.00 InchesProduct Series: Stainless StandardCompressed: 7.00 InchesStroke: 3.00 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: ST-30-40-5Specifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: ST30405UPC Code: 022697304056Search Key: ATT-ST30-Package Type: Aftermarket Packaging

Attwood Marine ST14-20-5 Gas SpringsAttwood INOX Stainless Standard Series. Stainless Steel shell and rod ensure corrosion-resistance and up to 30% lower cost than traditional Stainless springs. All Stainless Standard Series springs come with high-strength, corrosion-proof composite end fittings.Gas Springs: Aftermarket Gas SpringsOutput Force: 20 PoundsExtended: 20.00 InchesProduct Series: Stainless StandardCompressed: 12.00 InchesStroke: 8.00 InchesEnd Type: 10mm SocketShock Size: 6mm Rod x 15mm CylinderAlternate part number: ST-14-20-5Specifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: ST14205UPC Code: 022697142054Search Key: ATT-ST14-Package Type: Aftermarket Packaging

Attwood Marine ST10-60-1 Gas SpringsAttwood INOX Stainless Standard Series. Stainless Steel shell and rod ensure corrosion-resistance and up to 30% lower cost than traditional Stainless springs. All Stainless Standard Series springs come with high-strength, corrosion-proof composite end fittings.Gas Springs: Aftermarket Gas SpringsOutput Force: 60 PoundsExtended: 10.00 InchesProduct Series: Stainless StandardCompressed: 7.00 InchesStroke: 3.00 InchesEnd Type: 10mm SocketShock Size: 6mm Rod x 15mm CylinderAlternate part number: ST-10-60-1Specifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: ST10601UPC Code: 022697100603Search Key: ATT-ST10-Package Type: Bulk - Not packaged

Attwood Marine ST29-30-1 Gas SpringsAttwood INOX Stainless Standard Series. Stainless Steel shell and rod ensure corrosion-resistance and up to 30% lower cost than traditional Stainless springs. All Stainless Standard Series springs come with high-strength, corrosion-proof composite end fittings.Gas Springs: Aftermarket Gas SpringsOutput Force: 30 PoundsExtended: 36.30 InchesProduct Series: Stainless StandardCompressed: 21.10 InchesStroke: 15.20 InchesEnd Type: 10mm SocketShock Size: 10mm Rod x 22mm CylinderAlternate part number: ST-29-30-1Specifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: ST29301UPC Code: 022697290304Search Key: ATT-ST29-Package Type: Bulk - Not packaged

Attwood Marine SS36-40-1 Gas SpringsAttwood Gas Spring 17.2" x 10.2" 40# #SS36-40-1Attwood-Gas Spring 17.2" C10.2" S7" 40# #SS36-40-1 Normalized SKU: SS36401UPC Code:

Attwood Marine SS31-20-5 Gas SpringsAFTERMARKET GAS SPRINGSPopular replacement gas springs and mounting brackets for the aftermarket. Attwood has taken the guess work out of deciding which Gas Springs and Mounting Brackets you need. Don't see the one you want, please ask us and we'll try and find the one you need.8MM Rod x 18MM CylinderExtended 7.5. 5.25 inch length. 2.25 stroke. 10mm Composite Socket. 20 pound standard output force. Stainless Steel.Attwood-Gas Spring 7.5" C5.25" S2.25" 20# #SS31-20-5 Normalized SKU: SS31205UPC Code: 715584312059

Attwood Marine SL4-40-1 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 40 PoundsExtended: 6.50 InchesProduct Series: Ni-SlideCompressed: 4.90 InchesStroke: 1.60 InchesEnd Type: 6.3mm BladeShock Size: 6mm Rod x 15mm CylinderAlternate part number: SL-4-40-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: SL4401UPC Code: Search Key: ATT-SL4-Package Type: Bulk - Not packaged

Attwood Marine SL34-20-1 Gas SpringsThis Attwood Special Order item is only offered in a full case quantity. Attwood no longer allows for less than case quantity orders.Ni-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 20 PoundsExtended: 20.00 InchesProduct Series: Ni-SlideCompressed: 12.00 InchesStroke: 8.00 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-34-20-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: SL34201UPC Code: Search Key: ATT-SL34-Package Type: Bulk - Not packaged

Attwood Marine SL32-80-1 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 80 PoundsExtended: 10.50 InchesProduct Series: Ni-SlideCompressed: 7.50 InchesStroke: 3.00 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-32-80-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: SL32801UPC Code: 022697328106Search Key: ATT-SL32-Package Type: Bulk - Not packaged

Attwood Marine SL33-60-1 Gas SpringsThis Attwood Special Order item is only offered in a full case quantity. Attwood no longer allows for less than case quantity orders.Ni-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 60 PoundsExtended: 15.00 InchesProduct Series: Ni-SlideCompressed: 9.50 InchesStroke: 5.50 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-33-60-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: SL33601UPC Code: Search Key: ATT-SL33-Package Type: Bulk - Not packaged

Attwood Marine SL3-50-1 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 50 PoundsExtended: 20.00 InchesProduct Series: Ni-SlideCompressed: 12.00 InchesStroke: 8.00 InchesEnd Type: 10mm BladeShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-3-50-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: SL3501UPC Code: Search Key: ATT-SL3-Package Type: Bulk - Not packaged

Attwood Marine SL28-70-1 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 70 PoundsExtended: 30.91 InchesProduct Series: Ni-SlideCompressed: 17.31 InchesStroke: 13.78 InchesEnd Type: 10mm SocketShock Size: 10mm Rod x 22mm CylinderAlternate part number: SL-28-70-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: SL28701UPC Code: 022697287014Search Key: ATT-SL28-Package Type: Bulk - Not packaged

Attwood Marine SL26-80-1 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 80 PoundsExtended: 26.97 InchesProduct Series: Ni-SlideCompressed: 15.20 InchesStroke: 11.77 InchesEnd Type: 10mm SocketShock Size: 10mm Rod x 22mm CylinderAlternate part number: SL-26-80-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: SL26801UPC Code: 715584268011Search Key: ATT-SL26-Package Type: Bulk - Not packaged

Attwood Marine SL2-120-1 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 120 PoundsExtended: 15.00 InchesProduct Series: Ni-SlideCompressed: 9.50 InchesStroke: 5.50 InchesEnd Type: 10mm BladeShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-2-120-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil: Gas Springs are under pressure. Work carefully and wear eye protection! Clamp Gas Spring in a vise. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil. Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep. Drain oil by pumping the piston rod in and out several times. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations. Normalized SKU: SL21201UPC Code: Search Key: ATT-SL2-Package Type: Bulk - Not packaged

Sierra GSS62800 Gas Springs Designed for demanding saltwater applications 316L Stainless Steel Rod and Cylinder Engineered polymer rod ends Bronze bushings Multi-lobe internal seal Gas Springs: Nautalift Gas LiftOutput Force: 60 PoundsExtended: 20.00 InchesProduct Series: Nautalift Stainless Gas LiftCompressed: 12.00 InchesStroke: 8.00 InchesEnd Type: 10mm SocketSierra Gas Spring Stainless #GSS62800Normalized SKU: GSS62800UPC Code: 808282173753

Sierra GSS62790 Gas Springs Designed for demanding saltwater applications 316L Stainless Steel Rod and Cylinder Engineered polymer rod ends Bronze bushings Multi-lobe internal seal Gas Springs: Nautalift Gas LiftOutput Force: 40 PoundsExtended: 20.00 InchesProduct Series: Nautalift Stainless Gas LiftCompressed: 12.00 InchesStroke: 8.00 InchesEnd Type: 10mm SocketSierra Gas Spring Stainless #GSS62790Normalized SKU: GSS62790UPC Code: 808282173746