EMP 46-07312 Engine GasketsEMP Water Pump Housing Kit #46-07312Normalized SKU: 4607312UPC Code: 840080481647

EMP 27-27611 Engine Gaskets Mercury and Mariner 3-cylinder outboards in the 40 to 60 horsepower range are popular engines for a reason. They are reliable, manageable, and well-suited to a wide range of boats and applications. Keeping the cooling system properly sealed on these engines is one of the basics of keeping them that way, and the thermostat gasket is a small but important part of that equation. It seals the thermostat housing to the engine, preventing coolant from bypassing the thermostat or escaping the system at the housing joint. Any time the thermostat housing comes off, this gasket should be replaced. A used gasket that has been compressed and heat-cycled through multiple seasons is not going to provide the same seal as a fresh one, and at this price there is no reason to find out the hard way. The EMP 27-27611 Thermostat Gasket fits Mercury and Mariner 3-cylinder outboards from 40 to 60 horsepower across two specific production windows: 1991 to 1996 and 1999 to 2006. The gap between those ranges is not a typo, so verifying your model year before ordering is worth the extra moment. It is a direct replacement for Mercury part number 8128671 and also crosses with Sierra 18-2749 and GLM 35011. If you are cross-referencing from any of those numbers, you are in the right place. EMP manufactures this gasket to OEM specifications for a proper, coolant-resistant seal that holds up through the heat cycles and vibration of regular outboard use. Keep one on the shelf, and it will be there when you need it. Compatibility and specs at a glance: Fits Mercury and Mariner 3-cylinder outboards, 40 to 60 horsepower (1991 to 1996) Fits Mercury and Mariner 3-cylinder outboards, 40 to 60 horsepower (1999 to 2006) Verify model year before ordering; fitment does not cover all years in this range Replaces Mercury 8128671 Crosses with Sierra 18-2749 Crosses with GLM 35011 Built to OEM specifications by EMP Direct replacement, no modification required for listed applications Normalized SKU: 2727611UPC Code: 840080405827

EMP 27-27559 Engine GasketsThis product replaces:840080455730, 27-14697, 4, 27-146974Normalized SKU: 2727559UPC Code: 840080455730

EMP 27-27524 Engine GasketsThis product replaces:840080443928Normalized SKU: 2727524UPC Code: 840080443928

EMP 27-27510-1 Engine Gaskets This reed block gasket seals the reed valve assembly to the powerhead on Mercury and Mariner 175-275 HP 2-stroke outboards. The reed block sits at the intake port of each cylinder, and the gasket keeps the air/fuel charge from leaking past the mating surfaces. A blown or compressed reed block gasket can cause hard starting, rough idle, and a noticeable loss of power, so it's a part worth replacing any time the reed block is removed for inspection or service. It crosses with Mercury/MerCruiser OEM part 27-657443 and several aftermarket numbers, making it straightforward to verify against your existing parts list. Compatible Applications: Mercury/Mariner 175-275 HP 2-stroke outboard engines Replaces OEM Part Number: Mercury/MerCruiser 27-657443 Also Crosses With: Sierra: 18-0129 GLM: 30670 Normalized SKU: 27275101UPC Code: 840080421773

EMP 27-27139-1 Engine GasketsThis product replaces:840080427928, 317951, 27-27139Normalized SKU: 27271391UPC Code: 840080408828

EMP 27-13001 Engine GasketsThis product replaces:840080473116, 323312Normalized SKU: 2713001UPC Code: 840080473116

EMP 27-08602 Engine Gaskets The thermostat gasket is the unsung part of any thermostat service. It seals the thermostat housing to the engine, keeping coolant where it belongs and preventing the kind of slow seep that goes unnoticed until the engine starts running hotter than it should. Any time the thermostat housing comes off, this gasket should be replaced. The old one has been compressed and heat-cycled through years of service and will not seal with the same reliability as a fresh one. At this price, skipping it makes no sense. The EMP 27-08602 Thermostat Gasket covers an extensive range of Yamaha outboards and is a direct replacement for Sierra part number 18-0844 and Yamaha part number 688-12414-A1-00. If you are cross-referencing from either of those numbers, you are in the right place. EMP manufactures this gasket to OEM specifications for a proper, coolant-resistant seal that holds up through the heat cycles and vibration of regular outboard use. Compatibility and specs at a glance: Fits Yamaha 90, 115, 130, 150, 175, 200, and 225 (2.6L) horsepower outboards Fits Yamaha B90, B115, C75, C80, C85, C90, and CV85 models Fits Yamaha D150, DX150, E75, P75, S115, S130, S150, S175, S200 models Fits Yamaha SX150, SX200, V150, V175, ProV150, VX150 models Fits Yamaha VZ150, VZ175, VZ200 (2.6L), Z150, Z175, and Z200 (2.6L) models Replaces Sierra 18-0844 Replaces Yamaha 688-12414-A1-00 Built to OEM specifications by EMP Direct replacement, no modification required for listed applications Normalized SKU: 2708602UPC Code: 840080497686

EMP 27-03305 Engine GasketsEMP Thermostat Cover Gasket #27-03305Normalized SKU: 2703305UPC Code: 840080493688