00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap SS Cup Holder Flush Wide Lip #S-3503WL
$21.48
$25.64
Whitecap S-3503WL Drink Holders
The Whitecap S-3503WL is a flush-mount stainless steel cup holder with a wide lip, designed for boats where a standard-diameter holder just does not cut it. The wide lip extends the flange further out from the cutout, which gives it a more finished look on the surface and also makes it easier to install in thinner or softer decking materials where a narrow flange might pull through over time.
The flush-mount design keeps the holder sitting level with the surrounding surface rather than protruding above it. That matters on a helm station or console where you want a clean, uncluttered look and do not want a raised rim catching lines or gear. The stainless steel construction handles salt air, sun, and the occasional spilled drink without corroding or staining.
Installation requires a round cutout in the mounting surface. The installation instruction image in the product gallery shows the exact cutout dimensions, so check that before you start cutting. The wide lip covers a larger area around the hole, which also gives you a little more forgiveness if the cutout is not perfectly sized.
Material: stainless steel
Mount style: flush mount
Lip style: wide lip flange
Application: boat console, helm station, gunwale
Refer to installation instruction image in gallery for cutout dimensions
Normalized SKU: S3503WL
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
T-H Marine
T-H Marine Black Molded Cup Holder SS Rim #LCH-1SR-DP
$17.34
$20.70
T-H Marine LCH-1SR-DP Drink Holders• Available with Removable or Fixed Stainless Steel Rim • Robust Plastic Drink Holder with Built-in Drainage Hole and Nipple • Corrosion Resistant 316 Stainless Steel Rim for a Sleek Finished Look • Installs in a Standard 3.625” Cutout • Stepped Cup to Accommodate Various Drink Sizes • A = 4” Depth • B = 4-1/8” Rim Dia. • C = 3-5/8” Hole CutNormalized SKU: LCH1SRDPUPC Code: 733572086706
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sea-Dog
Sea-Dog Drink Holder with Bumpers Black ABS #588090-3
$10.43
$12.45
Sea-Dog 588090-3 Drink Holders
Captive Drink Holder with bezel features rubber grippers to help secure your drink. The bezel covers installation fasteners for a clean look. Constructed of ABS plastic and rubber bumpers, with a black ABS bezel. Installs with three #8 FH self-tapping fasteners.
A 4-3/4"
B 3-5/8"
C 3-3/8"
Normalized SKU: 5880903UPC Code: 035514588898
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Camco
Camco Rail Mopunted Cup Holder Small Clamp Gray #53093
$15.28
$18.24
Camco 53093 Drink HoldersClamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - GreyCamco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.Features:
The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 3/4-inch to 1-1/4-inch boat rails
Compatibility: Fits most standard cups, cans, bottles and tumblers
Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place
Durable Construction: Constructed of a durable, UV-resistant polymer
Color: Grey
Normalized SKU: 53093UPC Code: 014717530934
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Beckson Marine
Beckson Marine Holder Glass 3" x 3" Black #GH33-B1-U
$2.69
$3.16
Beckson Marine GH33-B1-U Drink HoldersBeckson's Recessed Drink Holders install almost anywhere: table, counter top, dashboard, seat-back, galley, RV, car, pickup, camper and more. These cup holders provide features unattainable in other products, such as a generous cavity under the flange for caulking that allows installation without fasteners, molded-in stand-offs on the bottom of the drink holder to help prevent condensation build-up and keep containers from sticking to the bottom, and four generous holes that allow for drainage at different angles.
Standard series drink holder
Nice tight fit for cans and water bottles
Single step model deep enough to keep containers secure
ID: 2-11/16"; Flange Width: 3-1/2"
Cup Depth: 2-7/8"; Hole Cut: 3"
Normalized SKU: GH33B1UUPC Code: 021083003047
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Boater Sports
Boater Sports Recessed Cup Holder Stainless 3-1/4" x 4" #52003
$12.55
$15.48
Boater Sports 52003 Drink Holders316 Stainless Steel Cup Holder is 3-1/4 inches by 4 iches. Drain hole in bottom of the cup holder.Boater Sports Recessed Cup Holder Stainless Steel (24) #52003Normalized SKU: 52003UPC Code: 763562520033
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Beckson Marine
Beckson Marine Super Cup Holder White #GH43-W1
$7.23
$8.50
Beckson Marine GH43-W1 Drink Holders
Recessed Rigid Super Size Drink Holder
The only universal holder for cans, bottles and glasses with or without insulators. Holds liter size soda, wine and beer bottles. Features generous cavity under flange for caulking in place, no screws necessary, also it has molded stand-offs on the bottom to help prevent condensation built-up.
Install almost anywhere. There are molded in stand-offs on the bottom of holders to help prevent condensation build-up and keep containers from sticking to the bottom, and four generous holes that allow for drainage at different angles.
Four drainage holes
Cut Hole I.D. 3-3/4"
Width of Flange: 4-3/8"
Depth of Cup: 3-1/4"
Normalized SKU: GH43W1UPC Code: 001152202700
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
T-H Marine
T-H Marine Cup Holder SS with Gripper #LCH-SSNS-RI-DP
$26.75
$31.93
T-H Marine LCH-SSNS-RI-DP Drink Holders
Top quality stainless steel construction. No step, straight side design for larger beverage containers. Peel and stick mounting gasket. Mounts in standard 3-5/8" hole. Includes drain hole and nipple for routing drainage.
Top Quality 304 Stainless Steel
No step, straight side design
UV-Resistant Rubber Insert Securely holds larger beverage containers
Peel and stick mounting gasket
Mounts in Standard 3-5/8" Hole
Padded Bottom
Includes drain hole and nipple for routing drainage
Normalized SKU: LCHSSNSRIDPUPC Code: 733572097108
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Marine Cup Holder SS Blue LED #11786B-7
$29.87
$35.65
Attwood Marine 11786B-7 Drink Holders
This convenient and stylish LED drink holder makes it easy to see in low-light conditions. The vibrant 35 Lumen interior light ring comes in blue and white to complement all boat interiors. 12 VDC.
Depth: 3.2"
Diameter: 3.6"
LED color: Blue
A: 4.3"
B: 3.6"
C: 3.6"
D: 3.2"
E: 2.9"
Normalized SKU: 11786B7UPC Code: 022697022042
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sea-Dog
Sea-Dog White Large Drink Holder #588061
$3.03
$3.56
Sea-Dog 588061 Drink HoldersFlush mount combo drink holders feature a dual-purpose design that allows the use of beverage cans with or without insulated can wraps. Constructed of impact resistant injection molded ABS they are available in black, white or gray. Installation requires a 3-3/4" hole.
Injection molded ABS
Dual purpose design allows use of beverage cans with or without insulated can wraps.
Requires 3-3/4" hole
Built with quality materials for durability
Seadog White Lge Drink Holder #588061Normalized SKU: 588061UPC Code: 035514588140
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sea-Dog
Sea-Dog Folding Drink Holder Black #588210-1
$7.99
$9.40
Sea-Dog 588210-1 Drink HoldersInjection Molded ABS. Color is Black. A: 3-3/4 in B: 3-7/8 in C: 2-3/4 in D: 3-7/16 in E: 15/16 in Seadog Folding Drink Holder - Black 588210-1Normalized SKU: 5882101UPC Code: 035514588027
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sea-Dog
Sea-Dog Chrome Brass Swivel Beverage Holder #588130-3
$20.27
$24.20
Sea-Dog 588130-3 Drink HoldersChrome Brass Swivel Beverage HolderSwivel Drink Holder features a quick release bracket for easy removal. Includes foam insulator, two wall brackets for flexible placement, and installation fasteners. Fits most cans, glasses, and mugs with handles. Chrome plated brass wire construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Seadog Chrome Brass Swivel Beverage Holder 588130-3Normalized SKU: 5881303UPC Code: 035514588157
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ongaro
Ongaro Stainless Cup Holder #60012
$8.50
$10.00
Ongaro 60012 Drink Holders304 Stainless steel drink holder with flange gasket. Width: 3-1/2" including a 1/4" flange. Height: 2-3/4". Fits: 3" hole.Ongaro Stainless Steel Cup Holder 60012Normalized SKU: 60012UPC Code: 724845002219
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Recessed Drink Holder Black Regular #11787-1
$2.87
$3.38
Attwood Marine 11787-1 Drink HoldersBlack injection-molded holders available in sizes for a variety of cans, bottles, and glasses. Each has holes for self-draining. Bulk Packaging--These items are not retail packaged.Specifications:Dimensions: 1-7/8" D x 3" diameterRecessed Drink Holder, Black, RegularNormalized SKU: 117871UPC Code: 022697117878
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Taco Metals
Taco Single Tumbler Poly Drink Holder #P01-2010W
$60.62
$72.74
Taco Metals P01-2010W Drink HoldersSingle Tumbler Poly Drink Holder - WhiteBoaters love our Poly Products! Our easy-to-clean, removable drink holders are the perfect must-have accessory for boating and fishing enthusiasts. Available in a variety of colors with strong suction-cup mounts, our line of drink holders is made from the highest quality, UV-resistant, anti-fungus polyethylene that is built to withstand the harsh marine environment.Features:
UV-stabilized high-density black or white polymer
Single holder holds one 16- to 30-ounce tumbler
Dual drain holes on recessed bottom
Patent-pending mobile phone holder design
Holds tumbler at proper height to prevent tipping
Includes mobile device cutout and charging cable port
Includes suction cups
Made in the USA
3-year limited warranty
Normalized SKU: P012010WUPC Code: 630838087951
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Drink Holder Adjustable White Nylon #S-5086P
$10.20
$12.17
Whitecap S-5086P Drink HoldersFolding Drink Holder - White Nylon
White Nylon
3-3/4" x 3-3/4"
Fastener Included
Normalized SKU: S5086PUPC Code: 725060508616
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Dual Ring Drink Holder Fold-up White #2449-7
$9.63
$11.49
Attwood Marine 2449-7 Drink HoldersFold-Up Drink Holder - Dual Ring - WhiteHolds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mount quickly and easily on boats or RVs. Flip the small ring up to hold small drinks; for large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. 7/8" closed depth. Four holes for #10 screws. Attwood-Dual Ring Drink Holder, Fold-up, White #2449-7Normalized SKU: 24497UPC Code: 022697244963
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap SS Cup Holder Flush Tumbler Style #S-3503C
$21.03
$25.10
Whitecap S-3503C Drink Holders
The Whitecap S-3503C is a flush-mount stainless steel cup holder built to fit tumblers and insulated cups, not just standard cans and bottles. If you have ever tried to wedge a 20 oz or 30 oz insulated tumbler into a standard marine cup holder and watched it tip over the first time the boat hits a wake, this is the fix. The wider, deeper tumbler-style opening accommodates the larger diameter base that most insulated drinkware uses.
The flush-mount design sits level with the surrounding deck or console surface, keeping the profile clean and snag-free. Stainless steel construction handles the marine environment without issue -- salt air, sun, and the occasional wave over the bow are not a problem for this holder. The polished finish looks sharp against fiberglass and composite surfaces and cleans up easily.
Installation requires a round cutout in the mounting surface. Check the product images for exact cutout dimensions before cutting, as the tumbler-style opening is wider than a standard cup holder cutout and the two are not interchangeable.
Material: stainless steel
Mount style: flush mount
Cup style: tumbler/insulated cup compatible
Application: boat console, helm station, gunwale
Refer to product images for cutout dimensions
Cutout: 4-1/8" dia.
Overall: 4-1/4" dia.
Depth: 3-1/8"
Normalized SKU: S3503CUPC Code: 725060035037
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Nylon Flush Mount Cupholder White with Drain #3507WD
$3.50
$4.12
Whitecap 3507WD Drink HoldersWhitecap Nylon Flush Mount Cupholder White with Drain #3507WDNormalized SKU: 3507WD
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Whitecap
Whitecap Nylon Flush Mount Cupholder Black with Drain #3507BD
$3.09
$3.64
Whitecap 3507BD Drink HoldersWhitecap Nylon Flush Mount Cupholder Black with Drain #3507BDNormalized SKU: 3507BD
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.