Navpod GP1080-31 Display MountsSystemPod Pre-Cut for Garmin GPSMAP® 8410xsv & 8610xsv on Right & 2 Additional Instruments (3.6″ holes) on Left for 9.5″ Wide GuardGP1080-31 for Sail: SystemPod Pre-Cut for Garmin GPSMAP 8410xsv/8610xsv on the right AND 2 additional instruments (3.6″ holes) on the left for 9.5″ wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips. Where you need it…when you need it. SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to qualityWe stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: GP108031

Navpod GP1080-15 Display MountsSystemPod Pre-Cut for Raymarine Axiom 12 & Axiom+ 12 on Right & 2 Additional Instruments (3.6″ holes) on Left for 9.5″ Wide Guard GP1080-15 for Sail: SystemPod Pre-Cut for Raymarine Axiom 12 / Axiom+ 12 on the right AND 2 additional instruments (3.6″ holes) on the left for 9.5″ wide guard (Pre-Cut is for Surface Mount using the rear mounting brackets)SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK130 Stanchion Kit.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to qualityWe stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: GP108015

NavPod GP2050-16 Display MountsSailPod Pre-Cut for Raymarine AXIOM 9 f/12″ Wide GuardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it”. Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to Quality - We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: GP205016UPC Code: 659988114591

Navpod GP2050-15 Display MountsSailPod Pre-Cut for Raymarine Axiom 12 & Axiom+ 12 for 12″ Wide Guard (Pre-Cut for Surface Mount Using Rear Mounting Brackets)SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your fingertips… “Where you need it when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: GP205015

NavPod GP1170-17 Display MountsSystemPod Pre-Cut for Simrad NSS12 evo3/B&G Zeus3 12 & 2 Instruments (Simrad IS42/B&G Triton²/AP44 Square Hole) for 9.5″ Wide GuardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. “Where you need it…when you need it”. SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to QualityNavPod stands behind their commitment by offering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: GP117017UPC Code: 659988113761

NavPod PP5920-01 Display MountsPP5920-01 PowerPod Pre-Cut for Raymarine AXIOM PRO 16PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” , 12″ and 16″ LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods – Protection, Convenience, Security. Normalized SKU: PP592001UPC Code: 659988119244

NavPod PP4900-01-C Display MountsPP4900-01 PowerPod Pre-Cut f/Raymarine es95/es97/es98 - Carbon BlackThe PP4900 Series, PowerPods are a better option than bracket mounting. PowerPods provide a clean look of flush mounting with the advantage of a swivel base.The trunion bracket that is supplied with marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.PowerPods for Sail are great for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.The Hi-Gloss MaterialNavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.The Waterproof SealAll NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.The Nickel Chrome Plated ScrewsWe use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!The Manufacturing ProcessHeavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.Our Commitment to QualityWe are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: PP490001CUPC Code: 659988112481

NavPod RMX4600 Display MountsRMX4600 RailMount Uncut (Usable Face = 11.375"W x 6.75"H) (28.9cm W x 17.1cm H)RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.All RailMounts Include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double Seal for watertight integrity Models are available pre-cut for popular electronics Chromed stainless steel arm with swivel mount Two sets of adaptors included for 1" or 1.25" diameter tubing The Hi-Gloss MaterialNavPods are manufactured with a custom co-extruded acrylic cappedABS material. We use the absolute best UV resistant material that provides avery high gloss white finish that matches gel-coated fiberglass. The Gen3enhancements now include a thicker gauge material that improves strength andprovides for better structural rigidity.The Waterproof SealAll NavPods are manufactured with a double gasket system providingan excellent watertight seal between the front and back of the NavPod forprotection of your Marine Electronics. NavPods are made to withstand theharshest of wet offshore boating conditions. Gen3 enhancements include athicker external silicone gasket with improved flush fit. The internal EPDMgasket is now 50% thicker and is not subject to "compression set" like manyrubber compounds. This is important when you need to open the NavPod in thefuture to service your electronics.The Nickel Chrome Plated ScrewsWe use all stainless steel mounting hardware that is supplied witheach NavPod. Large round head tamperproof screws have deeper sockets for theNavPod wrench for better holding ability when tightening than the previousscrews. For Gen3 we provide nickel chrome-plated stainless steel tamperproofscrews for security combined with a little bling!The Manufacturing ProcessHeavy-gauge thermoforming is considered an art since many processescome into play. It all starts with the design and development of thetooling. We are fortunate to have experienced in-house design engineers whoutilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used tointerface with our CNC machining centers to produce quality tools withprecision tolerances. We have re-designed and re-tooled all of the popularNavPods. We have reviewed all of the former products and selected the bestdesign elements of each and incorporated them in every new Gen3product.Our Commitment to QualityWe are committed to producing the best possible waterproof housingfor Marine Electronics. Now with two decades of experience under our belt,we are confident you will have years of trouble free service and a longlasting high gloss finish. We will stand behind our commitment by nowoffering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: RMX4600UPC Code: 659988113495

Navpod GP2920-00 Display MountsGP2920-00 SailPod - Uncut - Usable Face 18.36" W x 10.61" HSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips… “Where you need it, when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. Normalized SKU: GP292000UPC Code: 659988117554

NavPod GP2604 Display MountsGP2604 SystemPod Pre-Cut for Raymarine e7/e7D & 2 Instruments for 12" Wide GuardGP2600 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.A SystemPod is best mounted on a Single Bend AngleGuards.SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.Sizing:Usable Face: 20"W x 6.25"HInstrument Cutout: 3.6"All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Normalized SKU: GP2604UPC Code: 659988108149

NavPod GP2516 Display MountsGP2515 SystemPod Pre-Cut for Simrad NSS7 evo2 or B&G Zeus² 7 & 1 Instrument for 12" Wide GuardGP2500 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.A SystemPod is best mounted on a Single Bend AngleGuards.SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.Sizing:Usable Face: 15.05"W x 6.25"HInstrument Cutout: 3.6"All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Normalized SKU: GP2516UPC Code: 659988109412

NavPod GP2507 Display MountsGP2507 SystemPod Pre-Cut for Raymarine a65/a67/a68 with space on left for 12" Wide GuardGP2500 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.A SystemPod is best mounted on a Single Bend AngleGuards.SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.Sizing:Usable Face: 15.05"W x 6.25"HAll SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Normalized SKU: GP2507UPC Code: 659988108705

NavPod GP2204 Display MountsGP2204 SailPod Pre-Cut for Raymarine a125 / a127 / a128 for 12" Wide GuardGP2200 Series for 12" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled sectionSailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.Sizing:Overall Size: 11.3"H x 16.5"W x 5.5"DUsable Face: 9.85"H x 15.18"W x 4.25"DMax Cutout: 9"H x 14.25"WAll SailPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners and wrench Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Normalized SKU: GP2204UPC Code: 659988109023

NavPod GP2501 Display MountsGP2501 SystemPod Pre-Cut for Garmin 720/721/740/740s/741/721xs/741xs/70s/70dv with space on left for 12" Wide GuardGP2500 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.A SystemPod is best mounted on a Single Bend AngleGuards.SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.Sizing:Usable Face: 15.05"W x 6.25"HAll SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Normalized SKU: GP2501UPC Code: 659988108019

NavPod GP2503 Display MountsGP2503 SystemPod Pre-Cut for Raymarine a75/a77/a78 with space on left for 12" Wide GuardGP2500 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.A SystemPod is best mounted on a Single Bend AngleGuards.SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.Sizing:Usable Face: 15.05"W x 6.25"HAll SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Normalized SKU: GP2503UPC Code: 659988108033

NavPod GP2040-13 Display MountsGP2040-13 SystemPod Pre-Cut for Simrad NSS9 evo2 or B&G Zeus² & 1 Instrument for 12" Wide GuardNavPod GP2040 Series - SystemPods for 12" Guards are for mounting one Raymarine C90W or E90W with two 3.6" holes for addtional marine electronics, all in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.A SystemPod is best mounted on a Single Bend AngleGuards.SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.Sizing:Overall Size: 9.5"H x 20.25"W x 6"DUsable Face: 7.375"H x 17.5"W x 5"DMax Cutout: 7"H x 17"WInstrument Cutout: 3.6"All SailPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Normalized SKU: GP204013UPC Code: 659988108620

NavPod GP2050-10 Display MountsGP2050-10 SailPod Pre-Cut for Simrad NSE8 or B&G Zeus Z8 for 12" Wide GuardGP2050 Series for 12" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.Sizing:Overall Size: 10.875"H x 15.125"W x 6.75"DUsable Face: 8.75"H x 12.75"W x 5"DMax Cutout: 8.375"H x 12.375"WAll SailPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners and wrench Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Normalized SKU: GP205010UPC Code: 659988108873

NavPod GP2040-08 Display MountsGP2040-08 SystemPod Pre-Cut for Simrad NSS8 or B&G Zeus Touch 8 & 2 Instruments for 12" Wide GuardNavPod GP2040 Series - SystemPods for 12" Guards are for mounting one Raymarine C90W or E90W with two 3.6" holes for addtional marine electronics, all in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.A SystemPod is best mounted on a Single Bend AngleGuards.SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.Sizing:Overall Size: 9.5"H x 20.25"W x 6"DUsable Face: 7.375"H x 17.5"W x 5"DMax Cutout: 7"H x 17"WInstrument Cutout: 3.6"All SailPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Normalized SKU: GP204008UPC Code: 659988109757

NavPod GP2040-07 Display MountsGP2040-07 SystemPod Pre-Cut for Simrad NSS7 or B&G Zeus Touch 7 with Space On The Left f/12" Wide GuardNavPod GP2040 Series - SystemPods for 12" Guards are for mounting one Raymarine C90W or E90W with two 3.6" holes for addtional marine electronics, all in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.A SystemPod is best mounted on a Single Bend AngleGuards.SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.Sizing:Overall Size: 9.5"H x 20.25"W x 6"DUsable Face: 7.375"H x 17.5"W x 5"DMax Cutout: 7"H x 17"WAll SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Normalized SKU: GP204007UPC Code: 659988109702