SeaDek Marine 53647-80067 Decking This is a SeaDek pad designed specifically for the YETI Loadout Bucket. It sits on top of the bucket lid and gives you a non-slip, cushioned surface that turns the bucket into something more useful than just a bucket. Use it as a seat, a bait prep surface, a drink rest, or just a stable platform that does not slide around the deck when the boat is moving. The pad is made from PE/EVA foam, the same closed-cell material SeaDek uses across its marine decking line. It is non-absorbent, easy to rinse clean, and UV-stabilized to hold its color through a full season of sun exposure. The Dark Gray and Black colorway is a clean, low-profile look that pairs well with most boat interiors and the YETI Loadout Bucket's own styling. Key Details Part Number: 53647-80067 Compatible with: YETI Loadout Bucket Color: Dark Gray / Black Material: PE/EVA closed-cell foam Properties: Non-slip surface, UV-stabilized, non-absorbent Application: Bucket lid pad for seating, prep surface, or deck use Installation uses SeaDek's adhesive backing system. Clean and dry the bucket lid surface before applying for the best bond. Once set, it stays in place through normal on-water use. This pad is cut to fit the YETI Loadout Bucket specifically. Confirm your bucket model before ordering, as SeaDek offers pads for other YETI and RTIC cooler and bucket models separately. Normalized SKU: 5364780067UPC Code: 817342027028

SeaDek Marine 53647-80066 Decking This is a SeaDek pad designed specifically for the YETI Loadout Bucket, in Storm Gray and Black. It sits on top of the bucket lid and gives you a non-slip, cushioned surface that turns the bucket into something more useful than just a bucket. Use it as a seat, a bait prep surface, a drink rest, or a stable platform that stays put on deck while the boat is moving. The pad is made from PE/EVA foam, the same closed-cell material SeaDek uses across its marine decking line. It is non-absorbent, easy to rinse clean, and UV-stabilized to hold its color through a full season of sun exposure. Storm Gray and Black is a lighter, more neutral colorway compared to the Dark Gray/Black version, and works well with lighter-colored boat interiors or wherever a softer contrast is the better fit. Key Details Part Number: 53647-80066 Compatible with: YETI Loadout Bucket Color: Storm Gray / Black Material: PE/EVA closed-cell foam Properties: Non-slip surface, UV-stabilized, non-absorbent Application: Bucket lid pad for seating, prep surface, or deck use Installation uses SeaDek's adhesive backing system. Clean and dry the bucket lid surface before applying for the best bond. Once set, it stays in place through normal on-water use. This pad is cut to fit the YETI Loadout Bucket specifically. Confirm your bucket model before ordering. If you prefer a darker colorway, the Dark Gray/Black version is available as part 53647-80067. Normalized SKU: 5364780066UPC Code: 817342027059

SeaDek Marine 53642-80067 Decking This is a SeaDek cooler pad cut specifically for the YETI Tundra 45. It sits on top of the cooler lid and gives you a non-slip, cushioned surface that makes the cooler genuinely useful as a seat, a bait prep station, or a stable surface for drinks and gear while you are on the water. The pad is made from PE/EVA closed-cell foam, the same material SeaDek uses across its marine decking line. It is non-absorbent, UV-stabilized, and easy to rinse clean after a day on the water. The Dark Gray and Black colorway is a clean, low-profile look that pairs well with the YETI Tundra's own styling and most boat interiors. Key Details Part Number: 53642-80067 Compatible with: YETI Tundra 45 cooler Color: Dark Gray / Black Material: PE/EVA closed-cell foam Properties: Non-slip surface, UV-stabilized, non-absorbent Application: Cooler lid pad for seating, prep surface, or on-deck use Installation uses SeaDek's adhesive backing system. Clean and dry the cooler lid surface thoroughly before applying for the best bond. Once set, the pad stays in place through normal on-water use and does not shift around when you sit on it. This pad is cut to fit the YETI Tundra 45 specifically. Confirm your cooler model before ordering, as SeaDek offers pads for other YETI Tundra sizes and cooler models separately. A Storm Gray/Black colorway is also available if you prefer a lighter color option. Normalized SKU: 5364280067UPC Code: 817342026793

SeaDek Marine 53642-80066 Decking This is a SeaDek cooler pad cut specifically for the YETI Tundra 45, in Storm Gray and Black. It sits on top of the cooler lid and gives you a non-slip, cushioned surface that makes the cooler useful as a seat, a bait prep station, or a stable spot for drinks and gear while you are on the water. The pad is made from PE/EVA closed-cell foam, the same material SeaDek uses across its marine decking line. It is non-absorbent, UV-stabilized, and easy to rinse clean after a day on the water. Storm Gray and Black is the lighter of the two colorways available for this pad, and works well with lighter-colored boat interiors or wherever a softer contrast fits better than the Dark Gray/Black version. Key Details Part Number: 53642-80066 Compatible with: YETI Tundra 45 cooler Color: Storm Gray / Black Material: PE/EVA closed-cell foam Properties: Non-slip surface, UV-stabilized, non-absorbent Application: Cooler lid pad for seating, prep surface, or on-deck use Installation uses SeaDek's adhesive backing system. Clean and dry the cooler lid surface thoroughly before applying for the best bond. Once set, the pad stays in place through normal on-water use and does not shift when you sit on it. This pad is cut to fit the YETI Tundra 45 specifically. Confirm your cooler model before ordering, as SeaDek offers pads for other YETI Tundra sizes and cooler models separately. If you prefer a darker colorway, the Dark Gray/Black version is available as part 53642-80067. Normalized SKU: 5364280066UPC Code: 878843002549

SeaDek Marine 53582-83380 Decking These are SeaDek coaming bolsters in Mocha, sold as a 2-pack. Each bolster measures 4 inches wide by 39 inches long and is 20mm thick, giving you a substantial cushion along your boat's gunnels or coaming rails where you lean, rest your arms, or brace yourself while fishing or running. The bolsters are made from closed-cell PE/EVA foam, the same material used across SeaDek's marine decking line. Closed-cell foam does not absorb water, does not crack or tear under UV exposure the way vinyl upholstery does, and does not get waterlogged after a season of use. At 20mm thick, there is enough material to actually feel the cushion, not just a thin layer of foam over a hard surface. Key Details Part Number: 53582-83380 Quantity: 2 bolsters per pack Dimensions: 4 inches wide x 39 inches long each Thickness: 20mm Color: Mocha Material: Closed-cell PE/EVA foam Properties: UV-stabilized, non-absorbent, will not crack or tear Application: Boat gunnels, coaming rails, cockpit bolsters Installation uses SeaDek's adhesive backing system. Clean and dry the mounting surface thoroughly before applying. The bolsters are flexible enough to conform to mild curves on coaming rails without gaps or lifting at the edges. Mocha is a warm brown tone that pairs well with teak, natural wood accents, and tan or beige boat interiors. SeaDek offers coaming bolsters in other colors and sizes if Mocha or the 4 x 39 inch dimension is not the right fit for your boat. Normalized SKU: 5358283380UPC Code: 817342028018

SeaDek Marine 53582-81266 Decking These are SeaDek coaming bolsters in Storm Gray, sold as a 2-pack. Each bolster measures 4 inches wide by 39 inches long and is 20mm thick, giving you a solid cushion along your boat's gunnels or coaming rails where you lean, rest your arms, or brace yourself while fishing or running. The bolsters are made from closed-cell PE/EVA foam, the same material used across SeaDek's marine decking line. Closed-cell foam does not absorb water, does not crack or tear under UV exposure the way vinyl upholstery does, and does not get waterlogged after a season of use. At 20mm thick, there is enough material to actually feel the cushion, not just a thin layer of foam over a hard surface. Key Details Part Number: 53582-81266 Quantity: 2 bolsters per pack Dimensions: 4 inches wide x 39 inches long each Thickness: 20mm Color: Storm Gray Material: Closed-cell PE/EVA foam Properties: UV-stabilized, non-absorbent, will not crack or tear Application: Boat gunnels, coaming rails, cockpit bolsters Installation uses SeaDek's adhesive backing system. Clean and dry the mounting surface thoroughly before applying. The bolsters are flexible enough to conform to mild curves on coaming rails without gaps or lifting at the edges. Storm Gray is a neutral, versatile color that works with most boat interiors and gel coat finishes. It is the more common choice for boats with gray, white, or charcoal color schemes. If your boat leans toward warmer tones, the Mocha version (part 53582-83380) is the same bolster in a warm brown colorway. SeaDek also offers coaming bolsters in other sizes if the 4 x 39 inch dimension is not the right fit. Normalized SKU: 5358281266UPC Code: 878843000590

SeaDek Marine 23522-80093 Decking This is a pre-cut SeaDek decking kit designed specifically for the 2007 Yamaha boat model it was patterned for. The pieces are cut to fit the deck layout of that specific hull, so you get a clean, factory-style install without measuring, cutting, or trimming foam yourself. If you have the right boat, this kit drops right in. The color combination is Mocha and Black with a teak pattern laser-etched into the surface. Mocha is the primary field color, Black is used for the accent borders and teak lines, and the teak pattern gives the deck a classic wood-grain look without any of the maintenance that actual teak requires. No sealing, no sanding, no worrying about rot. The material is SeaDek's closed-cell PE/EVA foam, which is non-absorbent, UV-stabilized, and provides a non-slip surface underfoot. It stays cooler than bare fiberglass or aluminum in direct sun, cushions your feet on long days on the water, and cleans up with soap and water. Key Details Part Number: 23522-80093 Compatible with: 2007 Yamaha (confirm your specific model against SeaDek's fitment guide) Color: Mocha / Black Pattern: Teak, laser-etched Material: Closed-cell PE/EVA foam Properties: Non-slip, UV-stabilized, non-absorbent Cut: Pre-cut to fit the specific hull layout Installation uses SeaDek's adhesive backing system. Clean and dry the deck surface thoroughly before applying. Proper surface prep is the most important step for a long-lasting bond. SeaDek recommends their surface prep products for the best results. Before ordering, confirm your exact Yamaha model and year against SeaDek's fitment guide to make sure this kit matches your hull. Pre-cut kits are model-specific and may not transfer to other hull configurations. Normalized SKU: 2352280093UPC Code: 810209522971

SeaDek Marine 23522-80066 Decking This is a pre-cut SeaDek decking kit designed specifically for the 2007 Yamaha boat model it was patterned for. The pieces are cut to fit the deck layout of that specific hull, so you get a clean, factory-style install without measuring, cutting, or trimming foam yourself. If you have the right boat, this kit drops right in. The color combination is Storm Gray, Black, and a teak pattern laser-etched into the surface. Storm Gray is the primary field color, Black handles the accent borders and teak lines, and the teak pattern gives the deck a classic wood-grain look without any of the upkeep that real teak demands. No sealing, no sanding, no rot to worry about. Storm Gray is the cooler, more neutral of the two colorways available for this kit, and works well with white, gray, and silver boat finishes. The material is SeaDek's closed-cell PE/EVA foam, which is non-absorbent, UV-stabilized, and provides a non-slip surface underfoot. It stays cooler than bare fiberglass in direct sun, cushions your feet on long days on the water, and cleans up with soap and water. Key Details Part Number: 23522-80066 Compatible with: 2007 Yamaha (confirm your specific model against SeaDek's fitment guide) Color: Storm Gray / Black Pattern: Teak, laser-etched Material: Closed-cell PE/EVA foam Properties: Non-slip, UV-stabilized, non-absorbent Cut: Pre-cut to fit the specific hull layout Installation uses SeaDek's adhesive backing system. Clean and dry the deck surface thoroughly before applying. Proper surface prep is the most important step for a long-lasting bond. SeaDek recommends their surface prep products for the best results. If you prefer a warmer color tone, the Mocha/Black version of this kit is available as part 23522-80093. Before ordering either colorway, confirm your exact Yamaha model and year against SeaDek's fitment guide. Pre-cut kits are model-specific and may not transfer to other hull configurations. Normalized SKU: 2352280066UPC Code: 810209522964

SeaDek Marine 23387-80093 Decking This is a pre-cut SeaDek decking kit designed specifically for the 2000-2001 Sea Ray 340 Sundancer. The pieces are patterned to fit the deck layout of that specific hull, so you get a precise, factory-style install without measuring, cutting, or trimming foam to fit. If you own a 2000 or 2001 Sea Ray 340 Sundancer, this kit is built for your boat. The color combination is Mocha and Black with a teak pattern laser-etched into the surface. Mocha is the primary field color, Black handles the accent borders and teak lines, and the teak pattern delivers a classic wood-grain look without any of the maintenance that real teak demands. No sealing, no sanding, no rot. The 340 Sundancer is a boat that deserves a clean deck, and this kit delivers that without the teak upkeep bill. The material is SeaDek's closed-cell PE/EVA foam, which is non-absorbent, UV-stabilized, and provides a non-slip surface underfoot. It stays cooler than bare fiberglass in direct sun, cushions your feet on long days on the water, and cleans up with soap and water. Key Details Part Number: 23387-80093 Compatible with: 2000-2001 Sea Ray 340 Sundancer Color: Mocha / Black Pattern: Teak, laser-etched Material: Closed-cell PE/EVA foam Properties: Non-slip, UV-stabilized, non-absorbent Cut: Pre-cut to fit the specific hull layout Installation uses SeaDek's adhesive backing system. Clean and dry the deck surface thoroughly before applying. Proper surface prep is the most important step for a long-lasting bond. SeaDek recommends their surface prep products for best results. Before ordering, confirm your exact model year and hull configuration against SeaDek's fitment guide. Pre-cut kits are model-specific and the 340 Sundancer had variations across its production run that may affect fitment. Normalized SKU: 2338780093UPC Code: 810209523039

SeaDek Marine 23387-80066 Decking This is a pre-cut SeaDek decking kit designed specifically for the 2000-2001 Sea Ray 340 Sundancer. The pieces are patterned to fit the deck layout of that specific hull, so you get a precise, factory-style install without measuring, cutting, or trimming foam to fit. If you own a 2000 or 2001 Sea Ray 340 Sundancer, this kit is built for your boat. The color combination is Storm Gray and Black with a teak pattern laser-etched into the surface. Storm Gray is the primary field color, Black handles the accent borders and teak lines, and the teak pattern delivers a classic wood-grain look without any of the maintenance that real teak demands. No sealing, no sanding, no rot. Storm Gray is the cooler, more neutral of the two colorways available for this kit, and pairs naturally with white, gray, and silver hull finishes that are common on the 340 Sundancer. The material is SeaDek's closed-cell PE/EVA foam, which is non-absorbent, UV-stabilized, and provides a non-slip surface underfoot. It stays cooler than bare fiberglass in direct sun, cushions your feet on long days on the water, and cleans up with soap and water. Key Details Part Number: 23387-80066 Compatible with: 2000-2001 Sea Ray 340 Sundancer Color: Storm Gray / Black Pattern: Teak, laser-etched Material: Closed-cell PE/EVA foam Properties: Non-slip, UV-stabilized, non-absorbent Cut: Pre-cut to fit the specific hull layout Installation uses SeaDek's adhesive backing system. Clean and dry the deck surface thoroughly before applying. Proper surface prep is the most important step for a long-lasting bond. SeaDek recommends their surface prep products for best results. If you prefer a warmer color tone, the Mocha/Black version of this kit is available as part 23387-80093. Before ordering either colorway, confirm your exact model year and hull configuration against SeaDek's fitment guide. Pre-cut kits are model-specific and the 340 Sundancer had variations across its production run that may affect fitment. Normalized SKU: 2338780066UPC Code: 810209523022

SeaDek Marine 23335-80093 Decking This is a pre-cut SeaDek decking kit designed specifically for the 2005-2006 Sea Ray 200 Select and 220 Select. The pieces are patterned to fit the deck layout of those specific hulls, so you get a precise, factory-style install without measuring, cutting, or trimming foam to fit. If you own a 2005 or 2006 Sea Ray 200 Select or 220 Select, this kit is built for your boat. The color combination is Mocha and Black with a teak pattern laser-etched into the surface. Mocha is the primary field color, Black handles the accent borders and teak lines, and the teak pattern delivers a classic wood-grain look without any of the maintenance that real teak demands. No sealing, no sanding, no rot. A clean, warm-toned deck that holds up season after season. The material is SeaDek's closed-cell PE/EVA foam, which is non-absorbent, UV-stabilized, and provides a non-slip surface underfoot. It stays cooler than bare fiberglass in direct sun, cushions your feet on long days on the water, and cleans up with soap and water. Key Details Part Number: 23335-80093 Compatible with: 2005-2006 Sea Ray 200 Select and 220 Select Color: Mocha / Black Pattern: Teak, laser-etched Material: Closed-cell PE/EVA foam Properties: Non-slip, UV-stabilized, non-absorbent Cut: Pre-cut to fit the specific hull layout Installation uses SeaDek's adhesive backing system. Clean and dry the deck surface thoroughly before applying. Proper surface prep is the most important step for a long-lasting bond. SeaDek recommends their surface prep products for the best results. Before ordering, confirm your exact model year and hull configuration against SeaDek's fitment guide. The 200 Select and 220 Select share this kit, but confirm your specific model is covered before purchasing. A Storm Gray/Black colorway may also be available for this hull if you prefer a cooler, more neutral tone. Normalized SKU: 2333580093UPC Code: 810209523015

SeaDek Marine 23335-80066 Decking This is a pre-cut SeaDek decking kit designed specifically for the 2005-2006 Sea Ray 200 Select and 220 Select. The pieces are patterned to fit the deck layout of those specific hulls, so you get a precise, factory-style install without measuring, cutting, or trimming foam to fit. If you own a 2005 or 2006 Sea Ray 200 Select or 220 Select, this kit is built for your boat. The color combination is Storm Gray and Black with a teak pattern laser-etched into the surface. Storm Gray is the primary field color, Black handles the accent borders and teak lines, and the teak pattern delivers a classic wood-grain look without any of the maintenance that real teak demands. No sealing, no sanding, no rot. Storm Gray is the cooler, more neutral of the two colorways available for this kit, and pairs naturally with white, gray, and silver hull finishes common on the Select models. The material is SeaDek's closed-cell PE/EVA foam, which is non-absorbent, UV-stabilized, and provides a non-slip surface underfoot. It stays cooler than bare fiberglass in direct sun, cushions your feet on long days on the water, and cleans up with soap and water. Key Details Part Number: 23335-80066 Compatible with: 2005-2006 Sea Ray 200 Select and 220 Select Color: Storm Gray / Black Pattern: Teak, laser-etched Material: Closed-cell PE/EVA foam Properties: Non-slip, UV-stabilized, non-absorbent Cut: Pre-cut to fit the specific hull layout Installation uses SeaDek's adhesive backing system. Clean and dry the deck surface thoroughly before applying. Proper surface prep is the most important step for a long-lasting bond. SeaDek recommends their surface prep products for best results. If you prefer a warmer color tone, the Mocha/Black version of this kit is available as part 23335-80093. Before ordering either colorway, confirm your exact model year and hull configuration against SeaDek's fitment guide. The 200 Select and 220 Select share this kit, but confirm your specific model is covered before purchasing. Normalized SKU: 2333580066UPC Code: 810209523008

King Plastic 5496WW14 Decking StarBoard 54" x 96" x 1/4" White/White Normalized SKU: 5496WW14

Download LiteratureSeaDek Marine 56411-89905 Decking40" x 80" 6mm Two Color Diamond Full Sheet - Brushed Texture - Brown/Black (1016mm x 2032mm x 6mm)SeaDek Sheet Material is the perfect solution for DIY boat flooring projects. Featuring a modern brushed texture and exceptional non-skid qualities, this SeaDek Diamond Full Sheet is 40″ x 80″ and 6mm thick, providing the perfect blend of comfort and durability.Easily cut to size with a sharp razor knife, SeaDek sheets are perfect for many different applications, including floors, seating, cooler tops, and poling platforms. The possibilities are endless! All SeaDek products come backed with SeaDek's pressure-sensitive adhesive for easy peel-and-stick application.Specifications: Colors: Brown/black Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 6mm Texture: Brushed Pattern: Diamond Normalized SKU: 5641189905SeaDek Marine 56411-89905 Literature Download Quick Reference Guide

Download LiteratureSeaDek Marine 56411-80093 Decking40" x 80" 6mm Two Color Diamond Full Sheet - Brushed Texture - Mocha/Black (1016mm x 2032mm x 6mm)SeaDek Sheet Material is the perfect solution for DIY boat flooring projects. Featuring a modern brushed texture and exceptional non-skid qualities, this SeaDek Diamond Full Sheet is 40″ x 80″ and 6mm thick, providing the perfect blend of comfort and durability.Easily cut to size with a sharp razor knife, SeaDek sheets are perfect for many different applications, including floors, seating, cooler tops, and poling platforms. The possibilities are endless! All SeaDek products come backed with SeaDek's pressure-sensitive adhesive for easy peel-and-stick application.Specifications: Colors: Mocha/black Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 6mm Texture: Brushed Pattern: Diamond Normalized SKU: 5641180093SeaDek Marine 56411-80093 Literature Download Quick Reference Guide