00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Load Rite
Load Rite Actuator 6.6k #6080.45
$364.87
$455.40
Download LiteratureLoad Rite 6080.45 Brake Components6,600lb Disc Brake Actuator – Tie Down Engineering ModelThe Model 660E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the master cylinder, supplying hydraulic pressure to the brakes. The built-in dampening shock absorber retards the telescoping shock against the hitch ball. Be sure to comply with the regulations for brakes in your state. Brake laws are sometimes minimum standards, and you may wish to add additional brakes to a trailer.Read the tow vehicle's owner’s manual on towing capacity and other towing recommendations before installing brakes or this actuator. The Model 660E Actuator is completely assembled and ready to bolt into place, if not already installed. Manufactured for tongue sizes: 3”x 3”, 3”x 4” & 3”x 5”.Features:
6,600 lbs. capacity
Fits 2″ in. hitch ball
For use with disc brakes
Maximum Actuator Capacity:
Gross Load: 6,600 lbs.
Maximum Tongue Load: 650 lbs.
The actual in-service rating is limited to that of the ball and hitch or the least-rated component on the tow vehicle or trailer being used, or the trailer manufacturer’s G.V.W.R. shown on the certification label, whichever is lower (note: G.V.W.R. is the Gross Vehicle Weight Rating, which includes the trailer and the load weight as a total gross weight). Normalized SKU: 608045Load Rite 6080.45 Literature Download Quick Reference Guide Owners Manual
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Load Rite
Load Rite Actuator 16.5k Ds Brk 2-5/16th #6080.44
$942.25
$1,141.00
Download LiteratureLoad Rite 6080.44 Brake Components16,500lb Capacity Disc Brake Actuator with 2-5/16″ CouplerThe Model 16.5 works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the brakes on the tow vehicle. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the master cylinder, supplying hydraulic pressure to the brakes. The built-in, sealed, independent dampening shock absorber controls the telescoping shock against the hitch.Be sure to comply with the regulations for brakes in the state. Brake laws are sometimes minimum standards, and users may wish to add brakes to a trailer to meet minimum Gross Vehicle Weight Ratings (G.V.W.R.). Note: G.V.W.R. is the Gross Vehicle Weight Rating, which includes the trailer and the load weight as a total gross weight.Read the tow vehicle owner’s manual on towing capacity and other towing recommendations before installing brakes or this actuator.The Model 16.5 Actuator is completely assembled and ready to bolt into place (tongue sizes: 3”x 4” & 3”x 5”, 9 ga. min.)Features:
16,500 lbs. capacity
Fits 2-5/16″ in. hitch ball
For use with disc brakes
Maximum Actuator Capacity:
Gross Load: 16,500 lbs.
Maximum Tongue Load: 1,650 lbs.
Minimum Tongue Weight: 5% of G.V.W.R.
The actual in-service rating is limited to that of the ball and hitch or the least-rated component on the tow vehicle or trailer being used, or the trailer manufacturer’s G.V.W.R. shown on the certification label, whichever is lower (note: G.V.W.R. is the Gross Vehicle Weight Rating, which includes the trailer and the load weight as total gross weight. Normalized SKU: 608044Load Rite 6080.44 Literature Download Owners Manual
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Load Rite
Load Rite Brake Kit 12" Rotar Autoflex Knott #4265.08K
$436.24
$544.48
Load Rite 4265.08K Brake Components12″ AutoFlex Knott Disc Brake KitLoad Rite's 6-lug, 12-inch vented rotor disc brake kit is manufactured by AutoFlex KNOTT and fits UFP 6,000 lbs. capacity 6-bolt axles. Does not fit Tie Down.Kit Includes:
Vented cupped and studded, zinc rotor, and hub assembly
Loaded caliper assembly with pads
Full inner and outer bearings, races, and corresponding seal
Dust cap, lug nuts, and mounting hardware
*LH/RH Compatible*Quantity (2) Kits Required Per Axle Assembly Normalized SKU: 426508K
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Load Rite
Load Rite Brake Kit 12" Rotar Dexter #4265.08
$374.17
$467.01
Load Rite 4265.08 Brake Components12″ Dexter Vented Rotor Disc Brake KitLoad Rite's 6-lug, 12-inch vented rotor disc brake kit is manufactured by Dexter and fits a standard 3,000-capacity spindle.Kit Includes:
Vented rotor with Galvx finish
Aluminum caliper with e-coat finish
Ceramic pads with backing plates
Galvanized heavy-duty mounting bracket
Dust cap, slider pins, and hardware
Pre-greased rotors include bearings, races, and seals
*Quantity (2) Kits Required Per Axle Assembly Normalized SKU: 426508
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Load Rite
Load Rite Brake Kit 10" Rotar Autoflex #4265.07K
$363.46
$453.64
Load Rite 4265.07K Brake Components10″ Knott Disc Brake KitLoad Rite's 5-lug, 10-inch vented integral rotor disc brake kit is manufactured by AutoFlex KNOTT and fits KNOTT 3,700 lbs. capacity 5-bolt axles.Kit Includes:
Vented cupped and studded, zinc rotor, and hub assembly
Loaded caliper assembly with pads
Full inner and outer bearings, races, and corresponding seal
Dust cap, lug nuts, and mounting hardware
*LH/RH Compatible*Quantity (2) Kits Required Per Axle Assembly Normalized SKU: 426507K
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AP Products
AP Products Electric Trailer Brake Assembly 12.25" x 3.38" LH #014-156443
$118.91
$147.62
AP Products 014-156443 Brake ComponentsOEM replacement electric trailer brake for single, tandem and triple axles. Complete left hand 12.25 inch x 3.38 inch electric trailer brake assembly. Compatible with 8,000 pound axles.
For single, tandem and triple axles
Complete left hand electric trailer brake assembly
Fits 12.25 inch x 3.38 inch
Compatible with 8,000 pound axles
Normalized SKU: 014156443UPC Code: 012857112171
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AP Products
AP Products Electric Trailer Brake Parts 10" x 2.25" Spring/Hardware Kit #014-136452
$7.51
$8.84
AP Products 014-136452 Brake ComponentsReplacement kit for electric trailer brakes on single, tandem and triple axles. This spring and hardware kit is for 10 inch x 2.25 inch brake assemblies. Includes hold down pin, cup, spring, adjustment spring and reactor spring.
Includes hold down pin, cup, spring, adjustment spring and reactor spring
For electric trailer brakes
Use on single, tandem and triple axles
For 10 inch x 2.25 inch brake assemblies
Built with quality materials
Normalized SKU: 014136452UPC Code: 711217007743
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AP Products
AP Products Electric Trailer Brake Parts 12" x 2" Shoe & Lining Kit #014-136444
$35.93
$42.88
AP Products 014-136444 Brake ComponentsReplacement kit for electric trailer brakes on single, tandem and triple axles. This shoe and lining kit is for 12 inch x 2 inch brake assemblies. Includes primary and secondary shoe and lining, hold down pins, cups and springs.
For single, tandem and triple axles
Shoe and lining kit for 12 inch x 2 inch brake assemblies
Includes primary and secondary shoe and lining, hold down pins, cups and springs
Built with quality materials
Normalized SKU: 014136444UPC Code: 007707112173
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stromberg Carlson
Stromberg Carlson 12" EPDM Shoe Pad 1-Pack #JBP-S12.1
$72.79
$90.36
Stromberg Carlson JBP-S12.1 Brake ComponentsOur Base Pad Shoes shore up your RVā€™s foundation with a jack pad that stays put. No more storing pads with dirt and mud on them in your RV or tow vehicle. Our molded rubber shoe is not glued together crumb rubber but an EPDM molded product design to protect your equipment while adding stability once parked and leveled. Once installed it stays on. It can be removed and re-installed if necessary as many times as you need to.
12" Molded EPDM Shoe Pad
Fits 11.5" and 12" round foot for 4 or 6 point leveling
100,000 lb. load capacity
Stays attached - no need to store
Includes one shoe pad
Normalized SKU: JBPS121UPC Code: 767773521117
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stromberg Carlson
Stromberg Carlson 12" EPDM Shoe Pad 2-Pack #JBP-S12.2
$136.39
$169.31
Stromberg Carlson JBP-S12.2 Brake ComponentsOur Base Pad Shoes shore up your RVā€™s foundation with a jack pad that stays put. No more storing pads with dirt and mud on them in your RV or tow vehicle. Our molded rubber shoe is not glued together crumb rubber but an EPDM molded product design to protect your equipment while adding stability once parked and leveled. Once installed it stays on. It can be removed and re-installed if necessary as many times as you need to.
12" Molded EPDM Shoe Pad
Fits 11.5" and 12" round foot for 4 or 6 point leveling
100,000 lb. load capacity
Stays attached - no need to store
Includes two shoe pads
Normalized SKU: JBPS122UPC Code: 767773521124
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Dexter Axle
Dexter Axle Shoe Lining Kit 10 Free Backing #K71-G00-50
$103.85
$128.92
Dexter Axle K71-G00-50 Brake ComponentsDexter Axle Shoe Lining Kit 10 Free Backing #K71-G00-50Normalized SKU: K71G0050
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Demco
Demco DA91 Drum Brake Actuator 8k #8759522
$309.74
$393.40
Demco 8759522 Brake ComponentsDemco DA91 Drum Brake Actuator 8k #8759522Normalized SKU: 8759522UPC Code: 159496
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Demco
Demco DA91 Drum Brake Actuator 8K #8759411
$421.90
$526.59
Demco 8759411 Brake ComponentsDemco DA91 Drum Brake Actuator 8K #8759411Normalized SKU: 8759411UPC Code: 159494
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Demco
Demco DA70 Drum Brake Actuator 7K #8705001
$208.76
$265.14
Demco 8705001 Brake ComponentsDemco DA70 Drum Brake Actuator 7K #8705001Normalized SKU: 8705001UPC Code: 159493
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Demco
Demco DA10 Disc Brake Actuator 12.5K #8104311
$552.68
$689.81
Demco 8104311 Brake ComponentsDemco DA10 Disc Brake Actuator 12.5K #8104311Normalized SKU: 8104311UPC Code: 159495
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AP Products
AP Products Electric Trailer Brake 12" x 2" #014-122451-B
$76.55
$95.02
AP Products 014-122451-B Brake ComponentsAP Products Electric Trailer Brake 12" x 2" #014-122451-BNormalized SKU: 014122451BUPC Code: 711217010613
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AP Products
AP Products Electric Trailer Brake 10" x 2-1/4" #014-122258-B
$84.90
$105.39
AP Products 014-122258-B Brake ComponentsAP Products Electric Trailer Brake 10" x 2-1/4" #014-122258-BNormalized SKU: 014122258BUPC Code: 711217010620
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AP Products
AP Products Electric Trailer Brake 10" x 2-1/4" #014-122450-B
$79.59
$98.80
AP Products 014-122450-B Brake ComponentsAP Products Electric Trailer Brake 10" x 2-1/4" #014-122450-BNormalized SKU: 014122450BUPC Code: 711217010606
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AP Products
AP Products Electric Trailer Brake 12" x 2" #014-122259-B
$69.21
$83.05
AP Products 014-122259-B Brake ComponentsAP Products Electric Trailer Brake 12" x 2" #014-122259-BNormalized SKU: 014122259BUPC Code: 711217010637
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AP Products
AP Products Brake Drum/Hub 5 on 4.5" 0.5" Studs 3,500 lb 10" Brake #014-126003
$70.13
$84.15
AP Products 014-126003 Brake ComponentsElectric trailer brake OEM replacement brake drum/hub for single, tandem and triple axle applications. Designed for axles with a 3,500 pound weight capacity. Features 5 on 4.5 inch bolt pattern, 0.5 inch studs and 10 inch brake. Built with quality materials.
Studs
Stud Size: 0.5 inch
Brake Size: 10 inch
Designed for axles with a 3,500 pound weight capacity
Built with quality materials
Normalized SKU: 014126003UPC Code: 711217010323
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.