00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Dual Pro
Dual Pro PS3 3-Bank Battery Charger with 3-Bank BOS System #PS3/BOS12V3
$945.58
$1,134.69
Download Literature Watch VideoDual Pro PS3/BOS12V3 Battery ChargersPS3 3 Bank Battery Charger with 3 Bank B.O.S.This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 3-Bank (PN: BOS12V3) and Dual Pro’s Professional Series Battery Charger - 45A - 3-15A-Banks - 12V-36V (PN: PS3).B.O.S. (Battery Optimization System) - 12V - 3-BankB.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.Features:
Available in 6V, 8V, and 12V configuration
Up to six batteries in a series
Battery Selection and Prediction (BSAP-24) algorithm
Less than 1mA sleep mode
Transfer rate up to 7.5A
Self-powered
Any type of battery chemistry
Used in Any Application Where Batteries Are in Series:
Marine
Golf
Industrial
Aerial Equipment
Solar Power
Electrical Vehicles
Communications
Defense/Military
Professional Series Battery Charger - 45A - 3-15A-Banks - 12V-36VThe Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best-performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.Battery Charging System Designed for Use On Land and in Fresh and Salt Water:
The “Green” Charger: Totally “Repairable” Not a Throw-Away
Unmatched Performance, Reliability, Safety and Quality
TROUBLE FREE – Just Plug It In and Forget It!
Join Over 750,000 of Dual Pro’s Satisfied Customers!
Fully Automatic and Waterproof
Features:
Approved for Wet Cell and AGM batteries
Models also available for Gelled Electrolyte batteries
Designed for use in fresh and saltwater
DeltaVolt® Intuitive Charging Technology
Waterproof, dependable, rugged construction
Independent outputs
Fully automatic/multi-stage charging
Zero spark technology
Battery maintenance mode
On-board diagnostic codes
Temperature-compensated
Advanced microprocessor controlled
Battery systems available: 12V – 48V
LED lights indicate the state of charge
Reverse polarity protected
No installation restrictions
FCC Parts A & B interference-compliant
DC charge cables = 5' AC power cord = 3'
Approved and meets ISO 8846 Marine standards
Ignition protected (US Coast Guard 33 CFR 183.410
May Be Used in Many Types of Sporting Applications Including:
Inland Watercraft
Salt Water Watercraft
Motorcycles
Golf Carts
Utility Vehicles
Normalized SKU: PS3/BOS12V3Dual Pro PS3/BOS12V3 Literature Download Quick Reference Guide Owners Manual Product BrochureDual Pro PS3/BOS12V3 Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Dual Pro
Dual Pro PS3 3-Bank Battery Charger with 2-Bank BOS System #PS3/BOS12V2
$945.58
$1,134.69
Download Literature Watch VideoDual Pro PS3/BOS12V2 Battery ChargersPS3 3 Bank Battery Charger with 2 Bank B.O.S.This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro's Professional Series Battery Charger - 45A - 3-15A-Banks - 12V-36V (PN: PS3).B.O.S. Battery Optimization System - 12V - 2-BankB.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.Features:
Available in 6V, 8V, and 12V configuration
Up to six batteries in a series
Battery Selection and Prediction (BSAP-24) algorithm
Less than 1mA sleep mode
Transfer rate up to 7.5A
Self-powered
Any type of battery chemistry
Used in Any Application Where Batteries Are in Series:
Marine
Golf
Industrial
Aerial Equipment
Solar Power
Electrical Vehicles
Communications
Defense/Military
Professional Series Battery Charger - 45A - 3-15A-Banks - 12V-36VThe Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best-performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.Battery Charging System Designed for Use On Land and in Fresh and Salt Water:
The “Green” Charger: Totally “Repairable” Not a Throw-Away
Unmatched Performance, Reliability, Safety and Quality
TROUBLE FREE – Just Plug It In and Forget It!
Join Over 750,000 of Dual Pro’s Satisfied Customers!
Fully Automatic and Waterproof
Features:
Approved for Wet Cell and AGM batteries
Models also available for Gelled Electrolyte batteries
Designed for use in fresh and saltwater
DeltaVolt® Intuitive Charging Technology
Waterproof, dependable, rugged construction
Independent outputs
Fully automatic/multi-stage charging
Zero spark technology
Battery maintenance mode
On-board diagnostic codes
Temperature-compensated
Advanced microprocessor controlled
Battery systems available: 12V – 48V
LED lights indicate the state of charge
Reverse polarity protected
No installation restrictions
FCC Parts A & B interference-compliant
DC charge cables = 5' AC power cord = 3'
Approved and meets ISO 8846 Marine standards
Ignition protected (US Coast Guard 33 CFR 183.410)
May Be Used in Many Types of Sporting Applications Including:
Inland Watercraft
Salt Water Watercraft
Motorcycles
Golf Carts
Utility Vehicles
Normalized SKU: PS3/BOS12V2Dual Pro PS3/BOS12V2 Literature Download Quick Reference Guide Owners Manual Product BrochureDual Pro PS3/BOS12V2 Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Dual Pro
Dual Pro PS2 Auto 2-Bank Battery Charger with 2-Bank BOS #PS2AUTO/BOS12V2
$802.50
$971.77
Download LiteratureDual Pro PS2AUTO/BOS12V2 Battery ChargersPS2 Auto 2 Bank Battery Charger with 2 Bank B.O.S.This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro’s PS2 Auto 15A - 2-Bank Lithium/AGM Battery Charger (PN: PS2AUTO).B.O.S. Battery Optimization System - 12V - 2-BankB.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.Features:
Available in 6V, 8V, and 12V configuration
Up to six batteries in a series
Battery Selection and Prediction (BSAP-24) algorithm
Less than 1mA sleep mode
Transfer rate up to 7.5A
Self-powered
Any type of battery chemistry
Used in Any Application Where Batteries Are in Series:
Marine
Golf
Industrial
Aerial Equipment
Solar Power
Electrical Vehicles
Communications
Defense/Military
PS2 Auto 15A - 2-Bank Lithium/AGM Battery ChargerLatest Technology:
Detects if a battery is Lithium or AGM
Automatically charges both Lithium and AGM batteries for optimal performance
Fully automatic. Completely and safely charges both Lithium and AGM batteries
Algorithms designed and validated with battery manufacturers for a 100% charge
The startup feature will wake up batteries that have turned off due to low-voltage protection
Auto return to charging feature
Quickest charge times in its class
Unbeatable performance, reliability, safety, and quality delivered by DUAL PRO®
Features:
Waterproof - Use on land and in fresh and saltwater
TROUBLE-FREE—Just Plug It In and Forget It!
Independent outputs
Fully automatic/multi-stage charging
On-board diagnostic codes
FCC 15 Parts A & B interference compliant
Approved and meets ISO 8846 Marine standards
Ignition protected (US Coast Guard 33 CFR 183.410)
3-Year Warranty
AutoProfile Intuitive Charging Technology Lithium/AGMProfessional and Sportsman Series chargers have set the standard in the marine industry for more than two decades, known as the safest, most reliable, and best performing chargers in the industry.AutoProfile Intuitive Charging Technology provides flexibility for a charging system, ready for the ever-changing lithium battery technologies. No matter if users choose Lithium or AGM batteries for the boat, Dual Pro is ready to keep a boat on the water longer, enhancing battery performance and extending battery life. Normalized SKU: PS2AUTO/BOS12V2Dual Pro PS2AUTO/BOS12V2 Literature Download Quick Reference Guide Owners Manual Product Brochure
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Dual Pro
Dual Pro PS2 2-Bank Battery Charger with 2-Bank BOS System #PS2/BOS12V2
$781.89
$946.82
Download Literature Watch VideoDual Pro PS2/BOS12V2 Battery ChargersPS2 2 Bank Battery Charger with 2 Bank B.O.S.This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro's Professional Series Battery Charger - 30A - 2-15A-Banks- 12V/24V (PN: PS2).B.O.S. Battery Optimization System - 12V - 2-BankB.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.Features:
Available in 6V, 8V, and 12V configuration
Up to six batteries in a series
Battery Selection and Prediction (BSAP-24) algorithm
Less than 1mA sleep mode
Transfer rate up to 7.5A
Self-powered
Any type of battery chemistry
Used in Any Application Where Batteries Are in Series:
Marine
Golf
Industrial
Aerial Equipment
Solar Power
Electrical Vehicles
Communications
Defense/Military
Professional Series Battery Charger - 30A - 2-15A-Banks- 12V/24VThe Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best-performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.Battery Charging System Designed for Use On Land and in Fresh and Salt Water:
The “Green” Charger: Totally “Repairable” Not a Throw-Away
Unmatched Performance, Reliability, Safety and Quality
TROUBLE FREE – Just Plug It In and Forget It!
Join Over 750,000 of Dual Pro’s Satisfied Customers!
Fully Automatic and Waterproof
Features:
Approved for Wet Cell and AGM batteries
Models also available for Gelled Electrolyte batteries
Designed for use in fresh and saltwater
DeltaVolt® Intuitive Charging Technology
Waterproof, dependable, rugged construction
Independent outputs
Fully automatic/multi stage charging
Zero spark technology
Battery maintenance mode
On-board diagnostic codes
Temperature-compensated
Advanced microprocessor controlled
Battery systems available: 12V – 48V
LED lights indicate the state of charge
Reverse polarity protected
No installation restrictions
FCC Parts A & B interference-compliant
DC charge cables = 5' AC power cord = 3'
Approved and meets ISO 8846 Marine standards
Ignition protected (US Coast Guard 33 CFR 183.410
May Be Used in Many Types of Sporting Applications Including:
Inland Watercraft
Salt Water Watercraft
Motorcycles
Golf Carts
Utility Vehicles
Normalized SKU: PS2/BOS12V2Dual Pro PS2/BOS12V2 Literature Download Quick Reference Guide Owners Manual Product BrochureDual Pro PS2/BOS12V2 Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Xantrex
Xantrex TRUECHARGE 3 30a 3-Bank Battery Charger 24v #804-2430-10
$810.27
$981.18
Download LiteratureXantrex 804-2430-10 Battery ChargersTRUECHARGE™3 30A 3 Bank Battery Charger - 24VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, TRUEcharge3 battery chargers feature low electrical interference and efficient power factor-corrected multistage charging. Thanks to their inherent drip-proof design characteristics, the TRUEcharge3 Chargers can be mounted in multiple positions. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 24 V models can be enhanced with an optional remote panel. Each model comes with built-in protection against surges and spikes on the AC power line.Features:
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Battery-equalization feature
Settings for flooded, gel, AGM, or lithium-ion batteries
Equipped with parallel stacking (remote panel required)
Ability to charge batteries drained to extremely low voltage
Added quiet mode
Protection Features:
Reverse-battery polarity protection
Drip-proof design
DC over-voltage protection
Over-temperature protection
Circuit breaker protection
Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:
Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate
Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate
Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate
Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted):
Output Current (nominal): 30 A
Output Voltage (nominal, depending on settings): Charge 28.4–31.0 Vdc; Float 26.8–27.6 Vdc; 32 V
DC Output Connections: Three
AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal
Temperature Compensation: Three settings
Charger Efficiency: > 80%
Battery Type: Gel, Flooded, AGM, LiFePO4
Minimum Recommended Battery Bank Size: 60 Ah
General Specifications:
Operating Temperature Range: 0–60°C (32–140°F)
Storage Temperature -40–80°C (-40–176°F)
Battery Connection: Three positive terminals and one negative terminal
Dimensions (H x W x L): 90 x 170 x 340 mm (3.5 x 6.7 x 13.4”)
Weight 4.5 kg (9.9 lb)
Regulatory Approvals Meets CSA 60335-2-29, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: 804243010UPC Code: 715535024109Xantrex 804-2430-10 Literature Download Quick Reference Guide
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Xantrex
Xantrex TRUECHARGE 3 20a 3-Bank Battery Charger 24v #804-2420-10
$579.29
$723.03
Download LiteratureXantrex 804-2420-10 Battery ChargersTRUECHARGE™3 20A 3 Bank Battery Charger - 24VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, TRUEcharge3 battery chargers feature low electrical interference and efficient power factor-corrected multistage charging. Thanks to their inherent drip-proof design characteristics, the TRUEcharge3 Chargers can be mounted in multiple positions. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 24 V models can be enhanced with an optional remote panel. Each model comes with built-in protection against surges and spikes on the AC power line.Features:
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Battery-equalization feature
Settings for flooded, gel, AGM, or lithium-ion batteries
Equipped with parallel stacking (remote panel required)
Ability to charge batteries drained to extremely low voltage
Added quiet mode
Protection Features:
Reverse-battery polarity protection
Drip-proof design
DC over-voltage protection
Over-temperature protection
Circuit breaker protection
Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:
Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate
Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate
Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate
Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted):
Output Current (nominal): 20 A
Output Voltage (nominal, depending on settings): Charge 28.4–31.0 Vdc; Float 26.8–27.6 Vdc; 32 Vdc
DC Output Connections: Three
AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal
Temperature Compensation: Three settings
Charger Efficiency: > 80%
Battery Type: Gel, Flooded, AGM, LiFePO4
Minimum Recommended Battery Bank Size: 40 Ah
General Specifications:
Operating Temperature Range: 0–60°C (32–140°F)
Storage Temperature -40–80°C (-40–176°F)
Battery Connection: Three positive terminals and one negative terminal
Dimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”)
Weight 2.2 kg (4.8 lb)
Regulatory Approvals Meets CSA 60335-2-29, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: 804242010UPC Code: 715535920975Xantrex 804-2420-10 Literature Download Quick Reference Guide
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Xantrex
Xantrex TRUECHARGE 3 10a 3-Bank Battery Charger 24v #804-2410-10
$455.71
$568.78
Download LiteratureXantrex 804-2410-10 Battery ChargersTRUECHARGE™3 10A 3 Bank Battery Charger - 24VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, TRUEcharge3 battery chargers feature low electrical interference and efficient power factor-corrected multistage charging. Thanks to their inherent drip-proof design characteristics, the TRUEcharge3 Chargers can be mounted in multiple positions. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 24 V models can be enhanced with an optional remote panel. Each model comes with built-in protection against surges and spikes on the AC power line.Features:
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Battery-equalization feature
Settings for flooded, gel, AGM, or lithium-ion batteries
Equipped with parallel stacking (remote panel required)
Ability to charge batteries drained to extremely low voltage
Added quiet mode
Protection Features:
Reverse-battery polarity protection
Drip-proof design
DC over-voltage protection
Over-temperature protection
Circuit breaker protection
Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:
Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate
Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate
Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate
Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted):
Output Current (nominal): 10 A
Output Voltage (nominal, depending on settings): Charge 28.4–31.0 Vdc; Float 26.8–27.6 Vdc; 32 Vdc
DC Output Connections: Three
AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal
Temperature Compensation: Three settings
Charger Efficiency: > 80%
Battery Type: Gel, Flooded, AGM, LiFePO4
Minimum Recommended Battery Bank Size: 20 Ah
General Specifications:
Operating Temperature Range: 0–60°C (32–140°F)
Storage Temperature -40–80°C (-40–176°F)
Battery Connection: Three positive terminals and one negative terminal
Dimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”)
Weight 2.2 kg (4.8 lb)
Regulatory Approvals Meets CSA 60335-2-29, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: 804241010UPC Code: 715535920937Xantrex 804-2410-10 Literature Download Quick Reference Guide
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Xantrex
Xantrex TRUECHARGE 3 60a 3-Bank Battery Charger 12v #804-1260-10
$825.13
$999.18
Download LiteratureXantrex 804-1260-10 Battery ChargersTRUECHARGE™3 60A 3 Bank Battery Charger - 12VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, TRUEcharge3 battery chargers feature low electrical interference and efficient power factor-corrected multistage charging. Thanks to their inherent drip-proof design characteristics, the TRUEcharge3 Chargers can be mounted in multiple positions. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 12 V models can be enhanced with an optional remote panel. Each model comes with built-in protection against surges and spikes on the AC power line.Features:
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Battery-equalization feature
Settings for flooded, gel, AGM, or lithium-ion batteries
Equipped with parallel stacking (remote panel required)
Ability to charge batteries drained to extremely low voltage
Added quiet mode
Protection Features:
Reverse-battery polarity protection
Drip-proof design
DC over-voltage protection
Over-temperature protection
Circuit breaker protection
Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:
Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate
Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate
Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate
Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted):
Output Current (nominal): 60 A
Output Voltage (nominal, depending on settings): Charge 14.2–15.5; Float 13.4–13.8 Vdc; 16 V
DC Output Connections: Three
AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal
Temperature Compensation: Three settings
Charger Efficiency: > 80%
Battery Type: Gel, Flooded, AGM, LiFePO4
Minimum Recommended Battery Bank Size: 120 Ah
General Specifications:
Operating Temperature Range: 0–60°C (32–140°F)
Storage Temperature -40–80°C (-40–176°F)
Battery Connection: Three positive terminals and one negative terminal
Dimensions (H x W x L): 90 x 170 x 340 mm (3.5 x 6.7 x 13.4”)
Weight 4.5 kg (9.9 lb)
Regulatory Approvals Meets CSA 60335-2-29, CE Marked for the Low Voltage Directive (safety) and the EMC Directive, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: 804126010UPC Code: 715535920890Xantrex 804-1260-10 Literature Download Quick Reference Guide
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Xantrex
Xantrex TRUECHARGE 3 40a 3-Bank Battery Charger 12v #804-1240-10
$494.33
$616.99
Download LiteratureXantrex 804-1240-10 Battery ChargersTRUECHARGE™3 40A 3 Bank Battery Charger - 12VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, TRUEcharge3 battery chargers feature low electrical interference and efficient power factor-corrected multistage charging. Thanks to their inherent drip-proof design characteristics, the TRUEcharge3 Chargers can be mounted in multiple positions. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 12 V models can be enhanced with an optional remote panel. Each model comes with built-in protection against surges and spikes on the AC power line.Features:
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Battery-equalization feature
Settings for flooded, gel, AGM, or lithium-ion batteries
Equipped with parallel stacking (remote panel required)
Ability to charge batteries drained to extremely low voltage
Added quiet mode
Protection Features:
Reverse-battery polarity protection
Drip-proof design
DC over-voltage protection
Over-temperature protection
Circuit breaker protection
Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:
Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate
Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate
Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate
Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted):
Output Current (nominal): 40 A
Output Voltage (nominal, depending on settings): Charge 14.2–15.5; Float 13.4–13.8 Vdc; 16 V
DC Output Connections: Three
AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal
Temperature Compensation: Three settings
Charger Efficiency: > 80%
Battery Type: Gel, Flooded, AGM, LiFePO4
Minimum Recommended Battery Bank Size: 80 Ah
General Specifications:
Operating Temperature Range: 0–60°C (32–140°F)
Storage Temperature -40–80°C (-40–176°F)
Battery Connection: Three positive terminals and one negative terminal
Dimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”)
Weight 2.2 kg (4.8 lb)
Regulatory Approvals Meets CSA 60335-2-29, CE Marked for the Low Voltage Directive (safety) and the EMC Directive, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: 804124010UPC Code: 715535920852Xantrex 804-1240-10 Literature Download Quick Reference Guide
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Xantrex
Xantrex TRUECHARGE 3 20a 3-Bank Battery Charger 12v #804-1220-10
$386.21
$482.03
Download LiteratureXantrex 804-1220-10 Battery ChargersTRUECHARGE™3 20A 3 Bank Battery Charger - 12VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, TRUEcharge3 battery chargers feature low electrical interference and efficient power factor-corrected multistage charging. Thanks to their inherent drip-proof design characteristics, the TRUEcharge3 Chargers can be mounted in multiple positions. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 12 V models can be enhanced with an optional remote panel. Each model comes with built-in protection against surges and spikes on the AC power line.Features:
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Battery-equalization feature
Settings for flooded, gel, AGM, or lithium-ion batteries
Equipped with parallel stacking (remote panel required)
Ability to charge batteries drained to extremely low voltage
Added quiet mode
Protection Features:
Reverse-battery polarity protection
Drip-proof design
DC over-voltage protection
Over-temperature protection
Circuit breaker protection
Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:
Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate
Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate
Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate
Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted):
Output Current (nominal): 20 A
Output Voltage (nominal, depending on settings): Charge 14.2–15.5; Float 13.4–13.8 Vdc; 16 V
DC Output Connections: Three
AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal
Temperature Compensation: Three settings
Charger Efficiency: > 80%
Battery Type: Gel, Flooded, AGM, LiFePO4
Minimum Recommended Battery Bank Size: 40 Ah
General Specifications:
Operating Temperature Range: 0–60°C (32–140°F)
Storage Temperature -40–80°C (-40–176°F)
Battery Connection: Three positive terminals and one negative terminal
Dimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”)
Weight 2.2 kg (4.8 lb)
Regulatory Approvals Meets CSA 60335-2-29, CE Marked for the Low Voltage Directive (safety) and the EMC Directive, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Normalized SKU: 804122010UPC Code: 715535920814Xantrex 804-1220-10 Literature Download Quick Reference Guide
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Victron Energy
Victron Energy Orion-TR Smart 24/24-12a 280w Isolated #ORI242428120
$180.29
$228.98
Victron Energy ORI242428120 Battery Chargers
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion-Tr Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Normalized SKU: ORI242428120UPC Code: 8719076046097
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sterling Power
Sterling Power Pro Charge Ultra 12v 40a 3 Bank Charger #PCU1240PLUS
$556.27
$694.30
Sterling Power PCU1240PLUS Battery Chargers
The Sterling Power ProCharge Ultra is the ultimate 12 volt 40 amp 3 bank battery charger in a below deck design with power factor correction from any global AC power source. Four step charging to ensure full charge & conditioning along with float mode to protect against overcharging and extend battery life.
Sterling Power ProCharge Ultra advanced 3 bank battery charger designed and built to UL1236 & ABYC-31 standards
12 volt DC charging and 40 amp output with one common negative and three outputs for 1, 2 or 3 battery banks
Designed for use with LiPO4, GEL, AGM, Calcium, and Flooded Lead Acid Batteries
11 Pre-programmed battery charge curves and user customizable option
Four step charging includes absorption, bulk, float and low activity stand-by mode
Two LED digital meters displaying voltage and amperage during operation
One LED power meter indicating the percentage of charger output capacity being used and remaining
Global AC input of 90-260 volts AC and 40-80 Hertz will operate anywhere in the world
Active power factor correcting up to .99pf ensuring accurate power conversion and increasing efficiency
Temperature compensating charging and battery temperature sensor with 10 foot lead included
Optional remote panel with 30 foot cable available
5 year manufacturers warranty
Normalized SKU: PCU1240PLUS
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sterling Power
Sterling Power Pro Charge Ultra 12v 30a 3 Bank Charger #PCU1230PLUS
$498.54
$622.23
Sterling Power PCU1230PLUS Battery Chargers
The Sterling Power ProCharge Ultra is the ultimate 12 volt 30 amp 3 bank battery charger in a below deck design with power factor correction from any global AC power source. Four step charging to ensure full charge & conditioning along with float mode to protect against overcharging and extend battery life.
Sterling Power ProCharge Ultra advanced 3 bank battery charger designed and built to UL1236 & ABYC-31 standards
12 volt DC charging and 30 amp output with one common negative and three outputs for 1, 2 or 3 battery banks
Designed for use with LiPO4, GEL, AGM, Calcium, and Flooded Lead Acid Batteries
11 Pre-programmed battery charge curves and user customizable option
Four step charging includes absorption, bulk, float and low activity stand-by mode
Two LED digital meters displaying voltage and amperage during operation
One LED power meter indicating the percentage of charger output capacity being used and remaining
Global AC input of 90-260 volts AC and 40-80 Hertz will operate anywhere in the world
Active power factor correcting up to .99pf ensuring accurate power conversion and increasing efficiency
Temperature compensating charging and battery temperature sensor with 10 foot lead included
Optional remote panel with 30 foot cable available
5 year manufacturers warranty
Replaes Sterling Power USA PCU1230
Normalized SKU: PCU1230PLUS
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
PowerMax
PowerMax Lithium Battery Converter/Charger 55a 12v #PM3-55LKL
$183.11
$232.57
PowerMax PM3-55LKL Battery Chargers
PowerMax's PM3 series of chargers offer 3-stage charging technology with an adjustable fixed output power supply mode. They are also extremely versatile with the ability to charge all types of batteries; including lithium, lead acid, and AGM.
Replaces WFCO WF-9855
3 Stage smart charging
Fixed output voltage can be set between 13.0 Vdc to 16.5 Vdc
Built-in cooling fan
LED indicator light
Reverse polarity, overload, and thermal protection
2-Year Manufacturer warranty
Normalized SKU: PM355LKL
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
PowerMax
PowerMax Lithium Battery Converter/Charger 100a12v #PM3-100LKL
$275.60
$350.04
PowerMax PM3-100LKL Battery Chargers
PowerMax's PM3 series of chargers offer 3-stage charging technology with an adjustable fixed output power supply mode. They are also extremely versatile with the ability to charge all types of batteries; including lithium, lead acid, and AGM.
3 Stage smart charging
Fixed output voltage can be set between 13.0 Vdc to 16.5 Vdc
Built-in cooling fan
LED indicator light
Reverse polarity, overload, and thermal protection
2-Year Manufacturer warranty
Normalized SKU: PM3100LKL
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Mastervolt
Mastervolt Charge Mate Pro Lithium 90 #83309004
$328.50
$417.22
Download LiteratureMastervolt 83309004 Battery ChargersCharge Mate Pro Lithium 90Current limited electronic charge relay with high efficiency and reverse current protectionA secondary battery on board requires a dedicated charging solution. The Charge Mate Pro makes it possible to distribute the charger or alternator current effectively between two battery banks such as a starter and a service battery. The Charge Mate Pro connects both batteries during charging and keeps them isolated when discharging. This significantly reduces the risk of a flat starter battery for example.The Charge Mate Pro offers an additional advantage over mechanical charge relays, by limiting the charge current to the second battery. The primary battery, like a starter battery, is therefore charged with priority. The return current is automatically blocked even when the secondary battery has a higher voltage. An emergency start function is possible by connecting an optional bypass switch to the Charge Master Pro.A marine application example is the connection of a bow thruster battery to a service battery. The Charge Mate Pro ensures that the service battery is always charged with priority. The blocking of the return current from the bow thruster battery guarantees that the bow battery remains charged while the current limiting also prevents power dips in the onboard electrical network.The Charge Mate Pro series consists of a 40 Amp and a 90 Amp version, both suitable for charger or alternator applications. The Charge Mate Pro 90 ensures a higher charge current for example when charging Lithium-Ion batteries. It is also perfectly suitable for large automotive alternators up to 180 A and can be used in parallel operation with a 225 Amp alternator to fulfill even higher continuous power demands of your equipment on board.Charge Mate Pro: for controlled charging from a single source.Applications:Leisure and professional marine and mobile applications. An effective solution for high power demand on board and/or the need for prioritized or current limited charging.Features:
Charges two battery banks from a single source.
Electronic charge coupling with very low voltage drop.
Makes effective dual charging possible.
Suitable for Lithium Starter Batteries and AGM/GEL/Lithium Service Batteries
Charge current secondary battery limited to 40A or 90A.
High system reliability by prioritizing charging of the main battery.
Unidirectional which blocks return current under all circumstances.
Prevents power dips in the onboard electrical network.
Suitable for all kinds of chargers and alternators.
Monitoring with LED status indication.
IP65 electronics in a corrosion-resistant casing with aluminum heat sinks.
Fast and easy installation
General Specifications:
Monitoring: LED (warnings and status indication)
Output current: Limited to 90 A
Number of battery outlets: 2
Input voltage range: 9-32 V
Parallel configuration: Yes
Battery voltage: Automatic 12/24 V detection
Remote switch functions: On, off, auto, start assist
Dimensions, hxwxd: 157 x 140 x 80 mm/6.2 x 5.5 x 3.1 inch
Weight: 0,88 kg/1.9 lb
Compliance: CE
Technical Specifications:
Connection possibilities: 3 x fast-on connectors (switch, ground, and status) • switch: for an optional single pole ON-OFF-ON switch for remote operation • status: for an optional LED indicator
Power consumption: Switch open: < 1 mA at 12/24 V DC
Battery types: Suitable for charging from Lithium starter batteries to all types of batteries (for AGM/GEL starter battery applications, please use 83309002)
Switch on voltage: 13.7 V (12 V) / 27.4 V (24 V)
Switch on delay: 5 sec
Switch off voltage: 13.3 V (12 V) / 26.6 V (24 V)
Switch off delay: 2,5 sec
Relay: Electronically (MOSFETs with a low voltage drop of max 0.2 V)
Temperature range (ambient temp.): -40 °C to 60
Protection degree: IP65
Normalized SKU: 83309004Mastervolt 83309004 Literature Download Quick Reference Guide Product Brochure
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Mastervolt
Mastervolt Charge Mate Pro Lithium 40 #83304004
$287.69
$365.38
Download LiteratureMastervolt 83304004 Battery ChargersCharge Mate Pro Lithium 40Current limited electronic charge relay with high efficiency and reverse current protectionA secondary battery on board requires a dedicated charging solution. The Charge Mate Pro charging relay makes it possible to distribute the charger or alternator current effectively between two battery banks such as a starter and a service battery. The Charge Mate Pro connects both batteries during charging and keeps them isolated when discharging. This significantly reduces the risk of a flat starter battery for example.The Charge Mate Pro offers an additional advantage over mechanical charge relays, by limiting the charge current to the second battery. The primary battery, like a starter battery, is therefore charged with priority. The return current is automatically blocked even when the secondary battery has a higher voltage. An emergency start function is possible by connecting an optional bypass switch to the Charge Master Pro.A marine application example is the connection of a bow thruster battery to a service battery. The Charge Mate Pro ensures that the service battery is always charged with priority. The blocking of the return current from the bow thruster battery guarantees that the bow battery remains charged while the current limiting also prevents power dips of the onboard electrical network.The Charge Mate Pro series consists of a 40 Amp and a 90 Amp version, both suitable for charger or alternator applications. Charge Mate Pro: for controlled charging from a single source.Applications:Leisure and professional marine and mobile applications. An effective solution for high power demand on board and/or the need for prioritized or current limited charging.Features:
Electronic charge coupling with very low voltage drop.
Makes effective dual charging possible.
Suitable for charging from Lithium starter batteries to AGM/GEL/Lithium service batteries.
Charge current secondary battery limited to 40 A.
High system reliability by prioritizing charging of the main battery.
Unidirectional which blocks return current under all circumstances.
Prevents power dips in the onboard electrical network.
Suitable for all kinds of chargers and alternators.
Monitoring with LED status indication.
IP65 electronics in a corrosion-resistant casing with aluminum heat sinks.
Fast and easy installation
General Specifications:
Monitoring: LED (warnings and status indication)
Output current: Limited to 40 A
Number of battery outlets: 2
Input voltage range: 9-32 V
Parallel configuration: Yes
Battery voltage: automatic 12/24 V detection
Remote switch functions: On, off, auto, start assist
Dimensions, hxwxd: 157 x 140 x 80 mm/6.2 x 5.5 x 3.1 inch
Weight: 0,88 kg/1.9 lb
Compliance: CE
Technical Specifications:
Connection possibilities: 3 x fast-on connectors (switch, ground, and status) • switch: for an optional single pole ON-OFF-ON switch for remote operation • status: for an optional LED indicator
Power consumption: Switch open: < 1 mA at 12/24 V DC
Battery types: Suitable for charging from Lithium starter batteries to all types of batteries (for AGM/GEL starter battery applications, please use 83304002)
Switch on voltage: 13.7 V (12 V) / 27.4 V (24 V)
Switch on delay: 5 sec
Switch off voltage: 13.3 V (12 V) / 26.6 V (24 V)
Switch off delay: 2,5 sec
Relay: Electronically (MOSFETs with a low voltage drop of max 0.2 V)
Temperature range (ambient temp.): -40 °C to 60
Protection degree: IP65
Normalized SKU: 83304004Mastervolt 83304004 Literature Download Quick Reference Guide Product Brochure
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AP Products
AP Products Lithium Battery Charging Module #4400LBU
$66.09
$79.31
AP Products 4400LBU Battery ChargersLithium Battery Optimum Charging Module. 4 Hour Charging @ 14.3 VDC Lithium Battery Optimum Charging Module. 13.9 Float Mode Maintaining Full Charge. Compatible with: 8300 Series;5300 Series; 4400 Series; 5400 Series;5345RU; 6345RU; 7345RU; 7355RU. Assembled in North America using US Steel. Easy Installation.
4 Hour Charging @ 14.3 VDC Lithium Battery Optimum Charging Module
13.9 Float Mode Maintaining Full Charge
Compatible with: 8300 Series;5300 Series; 4400 Series; 5400 Series;5345RU; 6345RU; 7345RU; 7355RU
Assembled in North America using US Steel
Easy Installation
Normalized SKU: 4400LBUUPC Code: 711217034107
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Victron Energy
Victron BlueSmart IP65 Charger 24/13 (1) 120v NMEA 1-15 UL #BPC241331124
$251.50
$319.43
Download LiteratureVictron Energy BPC241331124 Battery ChargersBlueSmart IP65 Charger 24/13 (1) 120V NEMA 1-15P UL ApprovedThe Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in the workshop and on motor vehicles, such as classic cars, motorbikes, boats, and campervans. The Battery Is Charged, Smartly... To Perfect ConditionThe seven-step charging algorithm gets the most out of a battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and gives it a longer life.Recovery of Deeply-Discharged ‘Dead’ BatteriesUnlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.Connect the Battery with EaseThe charger comes with both crocodile clips and M8 eyelets, making it easy to connect to the battery. If users wish, they can leave it permanently connected.Check the Status of the Battery RemotelyThe Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet, or laptop. All settings of the charger can be configured with the VictronConnect app.Specifications:
Input Voltage: 120 VAC
Efficiency: 95%
Standby Power Consumption: 95% 0.5W
Minimum Battery Voltage: Starts charging from down to 0V
Charge Voltage 'Absorption': Normal: 28,8V High: 29,4V Li-ion: 28,4V
Charge Voltage 'Float': Normal: 27,6V High: 27,6V Li-ion: 27,0V
Charge Voltage 'Storage': Normal: 26,4V High: 26,4V Li-ion: 27,0V
Charge Current: 5/8A
Charge Current in Low Current Mode: 2 / 3A
Temperature Compensation (Lead-Acid Batteries Only): 32 mV/degrees C (18mV/degrees F
Can Be Used as Power Supply: Yes
Back Curreny Drain: 0.7Ah/month (1mA)
Protection: Reverse polarity; Output short circuit; Over temperature
Operating Temp. Range: -40 to +60 degrees C (full rated output up to 30 degrees C) -40 to +140 degrees F (full rated output up to 90 degrees F)
Humidity (non-condensing): Max 95%
Enclosure Specifications:
Battery-Connection: Black and red cable of 1.5 meters (4.9 feet)
120 V Ac-Connection: Cable of 1.8 meters (5.9 feet) with US NEMA 1-15 plug
Protection Category: P65 (splash and dust proof, and ignition protected)
Weight: 0,9kg (2lbs)
Dimensions (H x W x D): 24/8: 60 x 105 x190mm 2.3 x 4.1x 7.5 inches
Standards:
Safety: UL 1236, CSA C22.2, EN 60335-1, 60335-2-29
Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Please contact your dealer for any returns, repairs or support issues related to this product. Normalized SKU: BPC241331124UPC Code: 8719076060888Victron Energy BPC241331124 Literature Download Quick Reference Guide Owners Manual Product Brochure
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ProMariner
ProMariner ProSportHD 15 Gen 4 15a 3-Bank Battery Charger #44015
$164.39
$208.78
Download LiteratureProMariner 44015 Battery ChargersProSportHD 15 Gen 4 - 15 Amp - 3-Bank Battery ChargerProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling while delivering true rated amp output during charge mode. ProSportHD's enhanced microprocessor and software provide digital features including a fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators, and three digitally selectable performance charge profiles for Flooded (lead acid), AGM, and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real-time installation and battery fault status. Designed for harsh environments with our industrial-grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. Features:
ProMar Digital Technology Microprocessor and software-controlled charging technology for fast, precise charging
Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower, and rear-facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four-color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status, and Battery Type indication
Lightweight Design Up to 40% lighter compared to an epoxy-filled charger
Auto-Maintain Energy Saver Mode Monitor and auto-maintain batteries only when needed to maintain a full state of charge. This significantly reduces AC power consumption
Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains, and reconditions batteries once a month during storage periods. Fully charges and extends battery life
Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE are listed. FCC Class B
Easy installation and operation Pre-wired with 6’ AC and DC cables
Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
3 Year Warranty
Specifications:
DC Voltage Systems: 12/24v
DC Output: Two 12VDC @ 15 amps, fully distributed
Charging/Maintaining VDC Output: Up to 14.7VDC/13.8VDC
Battery Types: Flooded (lead acid), AGM, Gel, or LiFePO4
AC Input: 120VAC +/-10%, 50/60Hz, 3A
Amps: 15
No. of Batteries: 3
AC & DC Cable Length: 6 ft.
Dimensions (inch): 10.5" x 7.9" x 2.9"
Normalized SKU: 44015UPC Code: 031669440159ProMariner 44015 Literature Download Quick Reference Guide
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.